Download and install drivers and patches Win XP host with Solaris 10 guest

Greetings. I would appreciate your help.
Solaris 10 successfully installed as guest on Win XP host. (Using Parallels Workstation).
Getting fatal IO error 146 (connection refused on Xserver "0.0" ... no screens found. Cannot bring up Xorg.
Research strongly suggest video adapter settings. Adapter is Mobility Radeon 9800 - not on HCL but not new either.
Since I cannot reach the Internet from Solaris, how do I download drivers and patches and transfer them to Solaris?
Thanks Again,
Sincerely,
Jerry B

http://mohamedazar.files.wordpress.com/2010/11/usb-device.png

Similar Messages

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Downloading and installing drivers

Hello all,
I'm a complete newbie to downloading and installing drivers for my S-10, once you download the drivers, how and where do you install them without trashing your computer? Also I'd like to upgrade my RAM from 4GB to 6GB; what I'd like to do is get 2 2x2 GB of RAM and run them with 2 1x1 GB of RAM does anyone know whether this will work or am I asking for trouble?
Any help will be greatly appreciated.
Thanks

welcome to the forum!
driver installation and updates are made easy using thinkvantage system update. this comes pre-installed on all lenovo systems and can be used on clean installations as well. it saves from the tedious process of downloading individual drivers.
if you prefer to download individual drivers and install them manually, the S10 driver matrix can be found here.
regarding memory for the S10, this was discussed recently here. i suggest reading through that thread first before making any purchases. the 6GB combination you've mentioned will work as long as all modules match in type (ECC) and speed.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Can no longer install drivers and touch screen not working anymore

I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!

Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Download and installed LR6 and nothing happens with it. Doesn't open or a thing. Now what?

Download and installed LR6 and nothing happens with it. Doesn't open or a thing. Now what? Do not know if I should uninstall it and try again or ????

I had the same problem (Lightroom CC doesn't appear to run on Widnows) and your solution worked for me. Note that it isn't enough to just close and restart Creative Cloud. This is what I did:
Open Creative Cloud
Open Preferences and hit Sign Out
Sign back in again...
Now start Lightroom CC. This brought up a dialog labelled Photoshop CC saying that it needed to be signed in. When I dismissed it Lightroom then started up.
Something else I noticed that may help diagnose this issue is that the file amt.log contained the line:
04/21/15 23:09:07:623 | [INFO] | | | | AMT | | | 8804 | Application licensing status has changed to unlicensed.
See also the article Troubleshoot launch errors using logs | Creative Suite 5, CS5.5

Im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm wo

im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm worried because i have a course of some software tomorrow (oct 10). I have a mac, and it has all the system requirements. Can someone help me please?

I think I had the same problem. I've also tried a lot but I found my way out.
Follow every step of this:
Creative Cloud Help | Install, update, or uninstall apps

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

I downloaded and installed TB and it pre-configured my wife's mailbox instead of setting up a new one for me. Whats up with that?

I downloaded and installed TB and it pre-configured my wife's mailbox instead of setting up a new one for me.
The first time I ran it, there was her mailbox and all the msg's. I didn't input anything for a server, login or password. IOt just came up configured for her mailbox! Did it do that from the IP address or what?

I would guess that Thunderbird has been installed previously and it has simply rediscovered an old profile folder.

Since downloading and installing mavericks and safari I cannot use video calling on Facebook. How can I configure that so that it works?

Since downloading and installing Mavericks and Safari I cannot use the video call in Facebook. Anybody else having this problem and if so is there a solution?

I have this same issue! The button for to launch video chat isn't even there and when I go into skype to video in there I am able to get about 30 second of video then it freezes and won't come back.

HT4623 I push the download and install button and nothing happens - been going on forever.....

I push the download and install button and nothing happens - been going on forever.....

I push the on button on my washing machine and it does work.

I downloaded and installed XI and when open wants me to buy DC and reenter serial number this gives and error. Does anyone know how to talk with Adobe Chat

I downloaded and installed XI and when open wants me to buy DC and reenter serial number this gives and error. Does anyone know how to talk with Adobe Chat

Hi Kevin ,
It seems like you are getting update to Install Acrobat DC .That is the latest version of Acrobat .
If you are getting an error message along ,could you please share the screen shot of the same so that we can check at our end.
If you wish to connect with Adobe support team ,refer the following link to get in touch with them.
http://helpx.adobe.com/x-productkb/global/service-ccm.html
http://helpx.adobe.com/x-productkb/global/service1.html
Regards
Sukrit Dhingra

I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back. I tried re installing quicktime but it will not let me??

I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back. I tried re installing quicktime but it will not let me??

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

After buying and installing Lightroom and Photoshop...

After buying and installing Lightroom and Photoshop I have the following issues, Lightroom wont even launch and photoshop quits after launching. OS Windows 8. Any tips please?

Contacted customer care on chat and my problem has been partially solved. THis means Lightroom is not launching and works fine after a different download link was supplied. Very helpful. However Photoshop is still not working and CS agent told me that my problem will be forwarded to technical department and that they will call me (number supplied) on Monday. So far no one called. What is my next step please? Any suggestions? I need the program up and running. THanks

Download and install drivers and patches Win XP host with Solaris 10 guest

Similar Messages

Maybe you are looking for