Download and Install RV180W Firmware Upgrade
I received a warning when I accessed the router site which indicated;
"Your connection is not private
Attackers might be trying to steal your information from 192.168.50.1 (for example, passwords, messages, or credit cards)."
I have downloaded the firmware upgrade. However, when I execute the file, it executes a command to burn file to my DVD drive.
When allow the command to proceed, window returns the following;
"The selected disc image file isn't valid."
Any suggestions on how to proceed with upgrading the firmware.
Hi,
Please follow the procedure mentioned below to proceed with upgrading the firmware
Upgrading Firmware
Cisco RV180/RV180W Administration Guide
Upgrading Firmware
CAUTION During a firmware upgrade, do not try to go online, turn off the device, shut down
the PC, or interrupt the process in any way until the operation is complete. This
process takes about a minute, including the reboot process. Interrupting the
upgrade process at specific points when the flash is being written to may corrupt
the flash memory and render the router unusable.
You can upgrade to a newer firmware version from the Administration > Firmware
Upgrade page. To upgrade:
STEP 1 Click Browse, locate and select the downloaded firmware, and click Upload.
STEP 2 (Optional) Check the box to reset all configuration and settings to the default
values. Do not check this box if you want to keep any settings you have changed
on the router!
STEP 3 Click Start Firmware Upgrade. After the new firmware image is validated, the new
image is written to flash, and the router is automatically rebooted with the new
firmware. Choose Status > System Summary to make sure the router installed the
new firmware version.
And then to reboot it
To reboot the router, choose Administration > Reboot Router. Click Reboot.
Regards
Aateek Singh
Network Engineer
Spooster IT Services
Similar Messages
-
HOW TO DOWNLOAD AND INSTALL PREVIOUS FIRMWARE FOR ...
Pleae help on how to solved the problem. Before the update, I can able to record programs on my Live TV Subscription, particularly the myTV DVBH program. But after the update, the record function on the Options of Live TV was gone. That's why, i won't able to record programs anymore. Please help what should I do, If there's any other firmware that I may be able to replace the current one, for my record function to be operational again, or if there's no their update version available, please help me revert back to the original firmware... Thanks! I hope to get feedback soon...
As I forsee, the only solution possible is to download and install previous firmware version in which Recording function on Live TV is not disable....Yes, a Nokia Care Center is the Final solution if the website can't offer any solution. Thanks for the feedback. Actually, my phone is still in Warranty, that's why I'm pretty sure that I don't have to pay for the services that will be perform. But still I'm into looking other solution to prevent bringing my phone to Nokia Care.
First, I had already an experience with the Nokia Care Center when I have repair my 1st N96 which took a month but they failed to repair, thus my service provider, Smart Communications, just replace the device with a new one.
Next, my location is far from the Nokia Care Center.
Finally, I opt to save all my files, with the device which is almost 95% full or 14.8GB.
Please help if there's any other option... -
Can't download and install new itunes "upgrade"
I am trying in vain to upgrade my itunes to the latest version (something I need to purchase can not be purchased without the upgraded itunes version). Every time I attempt to download the new version of itunes, it says it has downloaded, but it is actually nowhere to be found on my computer. Nowhere. I have searched the entire machine, tried changing the default settings to make it drop into a specific folder. I tried restarting, using Firefox instead of Safari, and a host of other things and nothing changes.
This is insanity. How hard should it be to download a free upgrade of itunes software?Why are you installing through the Adobe Application Manager? Did you purchase Photoshop or subscribe? If you purchased Photoshop then please see http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ for information on how to download and install your purchased software.
-
After I downloaded and install the latest iTunes software upgrade (to 10.5.1), I am no longer able to download free upgrades to the apps on my iPhone or iPad.
The App Store just says I "don't own the major versions", which of course is nonsense. It seems as if Apple's iTunes/App Store has deleted my download history. Any suggestions?
Regards,
BruceActually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
Message was edited by: graphico
Message was edited by: graphico -
Background: our desktop computer started shutting off sporadically. I researched the problem, reset the memory chip, checked battery voltage on the motherboard (it was okay), resinserted the battery and tried to boot. It started up successfully and connected to the internet via our DSL line. FF had trouble opening pages due to security certificates so I checked to see if upgrades were available (3.6.8 was) and I downloaded and installed it. After that it refused to work. Apparently a setting somewhere got changed but I don't know what it might be. The DSL connection works with other computers which are wireless (the desktop has a hard connection.) Operating system is Windows XP. Other browsers do not work.
Turn off your firewall and antivirus software.
-
I downloaded and installed the: Mac mini EFI Firmware Update 1.6 on my mac mini running 10.8.1, was I correct in doing this ?
I didn't see this update come up in "Software Update"
If I was not meant to install this update, would it cause ANY damage at all to my mac ( this is my second as I dropped the first )
If I were to re-install ML would this fix any errors that this may have caused ?
The bottom of the page I link to says:
Boot ROM or SMC Version Information: MM51.0077.10
But when I click on "About this Mac" it says:
Boot ROM Version: MM51.0077.B10
SMC Version (system): 1.75f0
What does the additional "B" mean?
My mac mini is the Mid 2011 Model.
I am sorry if I am sounding super paranoid about this, but I don't want to have caused any permanent damage.Hello,
It's somewhere between almost impossible & impossible to install the wrong EFI Update with all the checks it does!
Mac mini (Mid 2011) with Intel graphics
Macmini5,1
MM51.0077.B10 (EFI 1.6)
Mac mini (Mid 2011) with Radeon graphics
Macmini5,2
MM51.0077.B10 (EFI 1.6)
Mac mini Server (Mid 2011)
Macmini5,3
MM51.0077.B10 (EFI 1.6)
http://support.apple.com/kb/HT1237
Not sure what the B means.
If I were to re-install ML would this fix any errors that this may have caused ?
No, Firmware is unaffected by any OS change or re-install. -
Hey Guys. I have a 1st gen dual 2.3 powerPC G5. I just recently upgraded my OS to Leopard 10.5. I cannot for the life of me, get FlashPlayer to work. I Downloaded and installed the archived 10_1r102_64 version, but it still doesn't work.
Everytime I click on a video it says I need to update to the newest version of flash, but my computer doesn't support the updated version. So I feel like I'm in a Catch-22.
Any suggestions?Jay, you may very well be up a creek without a paddle.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/
If it in fact says you do have 10.1.102.64, & some sites say you need higher, it is a catch 22. -
moved iphoto to trash and downloaded and installed new one but still tells me to prepare and upgrade it when I have done it 2 or 3 times now... how do i get it to open so I can upload my photos?
It helps if you provide details - not just a problem
What exactly dod you have and have you done?
What version of iPhoto did you have and what version do you now have? Of the OS? If you are upgrading from iphoto '08 or earlier did you download and RUN the iphoto library upgrader?
What is happening including exact messages
LN -
Premiere Pro CS5.5 Upgrade is Downloaded and Installed, but 5.0 Isn't Updating
Hi there. I may be missing something very simple here, but here goes: I already have Premiere Pro CS5 on my system, and I just purchased, downloaded and installed the 5.5 upgrade a little while ago, but CS5 isn't upgrading. It's still opening as Version 5.0.3.
It didn't ask me for my serial number at installation, which made me think it found what it was upgrading, and I've tried restarting, but to no avail.
Any help is much appreciated. Am I missing a step?
Thanks!
StephenHi,
Premiere pro CS5 and Premiere Pro CS5.5 are installed as seperate programs.
So Premiere Pro cs5.5 might have installed as a seperate program.
Check the all program list for the same.
If you face issues, just contact adobe technical support. -
When I try to upgrade iTunes on my pc it will go through the process of downloading and installing then I get this message
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again or enter an alternate path containing the installation package iTunes.msi
What should I do to correct this problem?Try to restart your computer and see if you and reupdate again.
-
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
When attempting to upgrade to 10.9.3 my Aple Store app locked up and gave me an error code of NSURLE ERROR Domain error-1012. It still thinks I need the upgrade even thogh I have successfully downloaded and installed it through another source. How can I correct this?
Hi,
That's because the download on the App store is to bussy.
I hat yersterday the same message ... after a fuw hours everything whas back to normal.
This is NOT your Mac or internet connection.
Dimaxum -
ITunes and Quick Time upgrade 9.0.2 error downloading and installing
Hi,
This morning I recived notification that there is a new update for iTunes and Quick Time. While downloading and installing this upgrade 9.0.2, I received the following error:
An error occurred during the installation of assembly "Microsoft.VC80.CRT, version= "8.0.50727.4053" type="win32", publicKey Token="1fc8b3b9a1e18e3b", process or Architecture="x86"', please refer to Help and Support for more information. HRESULT: 0x800736B3.
What the heck does that mean???I received the same error and spent roughly an hour and a half troubleshooting with the Apple Customer Support before I was told that it was a Windows or Lenovo manufacturer issue -- something to do with a registry key -- and that this was outside the realm of Apple Customer Support.
If you are able to resolve it, I would be interested in knowing how. -
I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?
Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck -
Help trying to download and install firmware updater 1.0.2
When I click on Apple's link to download and install the latest firmware updater, this is the message that I get. Look at the link, and let me know where I can find the latest firmware updater for the headset to work. Thanks!
Okay. I uninstalled AIR, downloaded the current version and re-installed. I thought maybe a full install with the current version would help. CS4 setup seems to be working until it gets stuck at 'installing Adobe AIR.' I uninstalled AIR again and let CS4 setup install it but it still dies when it tries to do so. When it gets stuck, It will not let me CANCEL, instead I have to 'force quit' -- even thoght it doesn't show up as crashed. One great thhing -- I no longer have the big bang game popping up.
Thank you so much for you answer, One step @ at time...
Suzanne
Maybe you are looking for
-
My iPhone 3GS mail app not pushing gmail
My iPhone 3GS is not receiving push mail, nor can it send anything, through my gmail account. All other mail accounts work, but gmail stopped sending and receiving 4 days ago for no apparent reason. I've restarted, deleted and created a new gmail acc
-
Printing PO in the language of OA (ordering address)
Hello all, In our POs we use partners VN (Vendor) and OA (Ordering address). The PO is printed with the address of OA, the output type NEU has the partner role OA . Sometimes the language key in the vendor master data of OA is different from the lang
-
I am thinking about buying an Apple TV. I would love to watch movies in HD. Are there HD movies available on iTunes? Someone said that I would have to buy HD movies from a store, then download them to iTunes, then play them over AppleTV to my HD TV.
-
Problem: The preview window in the top right of iMovie 08 does not work. It is either checkered or black. Possible Solution: If your iMovie project is using video from an event that has a lot of video in it, split that event up. Do this via right cli
-
Generating Peak File won't quit generating it
Captured roughly 2 hours of video using my Sony PD170 (don't laugh, I know it's antiquated, getting new one) with Windows Live Photo Gallery, (since PP CS4 quit importing video) and then imported that captured video into PP. I used 3 tapes to capture