Download and upload program

Hello to everybody,
I'm looking for a standard program that can download and upload program' source codes. I found the program REPTRAN (in SAP release 6.0) that can only download the source code (with the include as well), but i didn't find the upload one.
So, does anyone knows if exist a standard program that can download source codes (comprensive of include) and upload it as well?
Thanks and bye..

Hi,
Here is code which read the Programs & download:
Here Just pass the itab "SOURCE" into WS_DOWNLOAD.
function zuplt01f_tr.
*"*"Local interface:
*"  IMPORTING
*"     REFERENCE(PROGRAM_NAME) TYPE  SYREPID
*"  TABLES
*"      SOURCE
  data: f(240) type c,
        g type i,
        h(72) type c,
        low type i   .
  read report program_name into source . " state 'A'.
  describe table source  lines count.
endfunction.
Raja T

Similar Messages

  • Download and Upload Modulepool program

    hai all,
       Could any one say how to Download and Upload Modulepool program from sap.
    Thanks,
    Jeevan.

    Hi Puduru
    Welcome to ABAP forums.
    If you just want to export Module pool program once, you can use transaction SE80 and menu point Utilities->More Utilities->Upload/Download->Download option ( for each include / component ).
    Save it as a text file and then repeat the same process.
    Here's other programs for the same functionality. You can use one of them.
    http://www.members.tripod.com/abap4/Upload_and_Download_ABAP_Source_Code.html
    http://sap.ittoolbox.com/code/d.asp?d=1623&a=s
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/finding your code in bsp applications.article
    http://www.geocities.com/rmtiwari/Resources/Utilities/WebViewer.html
    http://www.dalestech.com/
    Dont forget to rewards pts, if it helps ;>)
    Regards,
    Rakesh

  • How to download  and upload a module pool program ?

    hi i am a sudent.can anyone suggest me how to download and upload a module pool program?
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on May 29, 2011 12:45 PM

    Hi,
    You cannot just download and upload module pool programs .
    There are 2 different ways.
    1. Copy all the includes and and create the same in the target system. You can download and upload the the Screen.
      But GUI status you have to manually create.
    2. If you have completely saved the module-pool program in one Workbench request(including Z tables u have used) in the original system ,just  release the workbench request and copy the data file and co file and upload to the target system ( use CG3Y & CG3Z).
    If the workbench is a Local Request save it in a Transport of copies and then move.
    Regards
    Aromal R

  • How to download and upload BDC programs

    How to download and upload BDC programs from one instance to another instance? I would like to transport my BDC programs from one dev client to another Dev client not through transport like smartforms.(we can download smartforms to desktop and upload to someother client)

    Hi,
    No need to record again. You can save the recording session by generating the program in transaction SHDB. Then you can download the BDC program and upload to another SAP client using transaction SE38.
    Regards,
    Ferry Lianto

  • After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

    After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

    If you have older versions of excel and word that previously ran under the Rosetta emulator (allows PowerPC code to run on Intel system), they will no longer work with Lion.
    You can use the Apple programs Pages and Numbers to access the files. They can be bought and downloaded from the App store. NeoOffice is available at http://www.neooffice.org/neojava/en/index.php which has Lion support. OpenOffice doesn't talk to Lion support, it's at http://www.openoffice.org/

  • Help~how can I download and upload pdf file in simple solution

    I am new doing Portal.
    I want to create a page which can provide download pdf file function and other page which can provide upload pfg file function.
    I created a link to download file, and implemented uploading files by access the file directory.
    Can this solution work in Portal?
    I've tried, but I couldn't access file directory through web_dav.
    Anyone can give me some suggestion?

    You can only install apps (programs) via the App Store app on your iPad, or by downloading them via iTunes store on your computer and then syncing them to your  iPad - you can't download and install programs from the internet via a browser, they are not compatible with the iPad.

  • Hierarchy download and upload

    Hi experts,
    i want to download hierarchies from production bw to development bw. pls explain me the procedure how to do. as i understand hierarchies will be in the r/3 system. then how do i download them and upload them to the required box in bw. is there any function module for downloading and uploading hierarchies.
    Pls help.....

    Hello,
    To execute the program you have to run it in transaction se38.
    Check if you have it since it is Z you might not have it.
    If you don't find it create in se38 a new program with the following code:
    *& Report  Z_SAP_HIERARCHY_DOWNLOAD                                    *
    * SAP Consulting BW Tools:
    * Download hierarchy into a flat file. The file has the correct format
    * for uploading into BW via a hierarchy InfoSource (IDOC).
    * (c) SAP AG 2003-2004 MFB, SAP Labs LLC
    * created: 2003-07-23
    * last update: 2004-05-02
    * Text elements:
    * P_DATES Include from/to dates
    * P_DATETO Valid-to date
    * P_FNAME File name
    * P_HIENM Hierarchy name
    * P_INTER Include from/to leaves
    * P_IOBJNM InfoObject
    * P_LANGU Language
    * P_VERS Hierarchy version
    REPORT z_sap_hierarchy_download.
    TYPE-POOLS: rs, rsdm, rrh1.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS:
    p_iobjnm TYPE rsdiobjnm MEMORY ID rsc.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS:
    p_hienm TYPE rshiedir-hienm,
    p_vers TYPE rshiedir-version,
    p_dateto TYPE rshiedir-dateto,
    p_langu TYPE rshiedirt-langu.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
    PARAMETERS:
    p_fname LIKE rlgrap-filename,
    p_dates AS CHECKBOX DEFAULT 'X',
    p_inter AS CHECKBOX DEFAULT 'X'.
    SELECTION-SCREEN END OF BLOCK b3.
    * File structure
    TYPES:
    * No dates/intervals
    BEGIN OF y_s_hierfile_1,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_1,
    y_t_hierfile_1 TYPE STANDARD TABLE OF y_s_hierfile_1,
    * With dates
    BEGIN OF y_s_hierfile_2,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    dateto TYPE rsdateto,
    datefrom TYPE rsdatefrom,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_2,
    y_t_hierfile_2 TYPE STANDARD TABLE OF y_s_hierfile_2,
    * With intervals
    BEGIN OF y_s_hierfile_3,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    leafto TYPE rsleafto,
    leaffrom TYPE rsleaffrom,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_3,
    y_t_hierfile_3 TYPE STANDARD TABLE OF y_s_hierfile_3,
    * With dates/intervals
    BEGIN OF y_s_hierfile_4,
    nodeid TYPE rshienodid,
    iobjnm TYPE rsiobjnm,
    nodename TYPE rsnodename,
    * tlevel TYPE rstlevel,
    link TYPE rslink,
    parentid TYPE rsparent,
    childid TYPE rschild,
    nextid TYPE rsnext,
    dateto TYPE rsdateto,
    datefrom TYPE rsdatefrom,
    leafto TYPE rsleafto,
    leaffrom TYPE rsleaffrom,
    langu TYPE langu,
    txtsh TYPE rstxtsh,
    txtmd TYPE rstxtmd,
    txtlg TYPE rstxtlg,
    END OF y_s_hierfile_4,
    y_t_hierfile_4 TYPE STANDARD TABLE OF y_s_hierfile_4.
    * Hierarchy definition
    DATA:
    g_s_hiesel TYPE rsndi_s_hiesel,
    g_s_hiedir TYPE rsndi_s_hiedir,
    g_subrc TYPE sy-subrc,
    g_t_hiedirt TYPE TABLE OF rshiedirt,
    g_s_hierstruc TYPE rssh_s_htab,
    g_t_hierstruc TYPE TABLE OF rssh_s_htab,
    g_s_thiernode TYPE rsthiernode,
    g_t_thiernode TYPE TABLE OF rsthiernode WITH KEY langu hieid objvers
    nodename,
    g_s_hierintvl TYPE rssh_s_jtab,
    g_t_hierintvl TYPE TABLE OF rssh_s_jtab WITH KEY hieid objvers nodeid,
    g_s_message TYPE rsndi_s_message,
    g_t_message TYPE TABLE OF rsndi_s_message,
    g_s_chavlinfo TYPE rsdm_s_chavlinfo,
    g_t_chavlinfo TYPE rsdm_t_chavlinfo.
    * File
    DATA:
    g_fname TYPE string,
    g_struct_s TYPE string,
    g_struct_t TYPE string,
    gr_s_file TYPE REF TO data,
    gr_t_file TYPE REF TO data.
    FIELD-SYMBOLS:
    <g_langu> TYPE ANY,
    <g_s_file> TYPE ANY,
    <g_t_file> TYPE STANDARD TABLE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_iobjnm.
      CALL FUNCTION 'RSD_IOBJ_F4'
        EXPORTING
          i_show_cha    = rs_c_true
          i_objvers     = rs_c_objvers-active
          i_hietabfl    = rs_c_true
        CHANGING
          c_iobjnm      = p_iobjnm
        EXCEPTIONS
          illegal_input = 1.
      CHECK sy-subrc = 0.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hienm.
      DATA:
      l_s_hiertxt TYPE rrh1_s_hiertxt,
      l_t_hiertxt TYPE rrh1_t_hiertxt.
      CALL FUNCTION 'RRH1_HIERARCHY_HELP_VALUES_GET'
        EXPORTING
          i_iobjnm          = p_iobjnm
          i_dateto          = p_dateto
          i_hienm           = p_hienm
          i_version         = p_vers
        IMPORTING
          e_t_hiertxt       = l_t_hiertxt
        EXCEPTIONS
          no_f4_available   = 1
          dialogue_canceled = 2
          OTHERS            = 3.
      CHECK sy-subrc = 0.
      READ TABLE l_t_hiertxt INTO l_s_hiertxt INDEX 1.
      CHECK NOT l_s_hiertxt IS INITIAL.
      p_hienm = l_s_hiertxt-hienm.
      DATA:
      l_s_dynpfields TYPE dynpread,
      l_t_dynpfields TYPE STANDARD TABLE OF dynpread.
      CLEAR: l_t_dynpfields, l_s_dynpfields.
      l_s_dynpfields-fieldname = 'P_VERS'.
      WRITE l_s_hiertxt-version TO l_s_dynpfields-fieldvalue.
      APPEND l_s_dynpfields TO l_t_dynpfields.
      l_s_dynpfields-fieldname = 'P_DATETO'.
      WRITE l_s_hiertxt-dateto TO l_s_dynpfields-fieldvalue.
      APPEND l_s_dynpfields TO l_t_dynpfields.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname     = sy-repid
          dynumb     = sy-dynnr
        TABLES
          dynpfields = l_t_dynpfields.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
      DATA:
      l_filename1 TYPE string,
      l_filename2 TYPE string,
      l_path TYPE string,
      l_fullpath TYPE string,
      l_action TYPE i.
      l_filename1 = p_fname.
      CALL METHOD cl_gui_frontend_services=>file_save_dialog
      EXPORTING
      window_title = 'Select Download File'
      default_extension = 'txt'
      default_file_name = l_filename1
      file_filter = 'All Files (*.*)|*.*|Text files (*.txt)|*.txt'
      CHANGING
      filename = l_filename2
      path = l_path
      fullpath = l_fullpath
      user_action = l_action
      EXCEPTIONS
      cntl_error = 1
      OTHERS = 2.                                               "#EC NOTEXT
      CHECK sy-subrc = 0.
      CALL METHOD cl_gui_cfw=>flush.
      IF l_action = 0.
        p_fname = l_fullpath.
      ENDIF.
    INITIALIZATION.
      GET PARAMETER ID 'RSC' FIELD p_iobjnm.
    START-OF-SELECTION.
    * Check input
      CHECK NOT p_fname IS INITIAL.
      IF p_langu IS INITIAL.
        p_langu = sy-langu.
      ENDIF.
      IF p_dateto IS INITIAL.
        p_dateto = '99991231'.
      ENDIF.
    * Read hierarchy
      CLEAR g_s_hiesel.
      g_s_hiesel-objvers = rs_c_objvers-active.
      g_s_hiesel-hienm = p_hienm.
      g_s_hiesel-version = p_vers.
      g_s_hiesel-iobjnm = p_iobjnm.
      g_s_hiesel-dateto = p_dateto.
      CALL FUNCTION 'RSNDI_SHIE_STRUCTURE_GET'
        EXPORTING
          i_s_hiesel        = g_s_hiesel
          i_no_nodenm_table = rs_c_true
        IMPORTING
          e_s_hiedir        = g_s_hiedir
          e_subrc           = g_subrc
        TABLES
          e_t_hiedirt       = g_t_hiedirt
          e_t_hierstruc     = g_t_hierstruc
          e_t_thiernode     = g_t_thiernode
          e_t_hierintvl     = g_t_hierintvl
          e_t_message       = g_t_message.
      IF g_subrc <> 0.
        READ TABLE g_t_message INTO g_s_message INDEX 1.
        IF sy-subrc = 0.
          MESSAGE ID g_s_message-msgid TYPE 'I' NUMBER g_s_message-msgno
          WITH g_s_message-msgv1 g_s_message-msgv2
          g_s_message-msgv3 g_s_message-msgv4.
        ELSE.
          MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
          WITH 'Hierarchy read error'.
        ENDIF.
        EXIT.
      ENDIF.
    * Defined output structures
      IF p_dates IS INITIAL AND p_inter IS INITIAL.
        g_struct_s = 'Y_S_HIERFILE_1'.
        g_struct_t = 'Y_T_HIERFILE_1'.
      ELSEIF p_dates = 'X' AND p_inter IS INITIAL.
        g_struct_s = 'Y_S_HIERFILE_2'.
        g_struct_t = 'Y_T_HIERFILE_2'.
      ELSEIF p_dates IS INITIAL AND p_inter = 'X'.
        g_struct_s = 'Y_S_HIERFILE_3'.
        g_struct_t = 'Y_T_HIERFILE_3'.
      ELSE.
        g_struct_s = 'Y_S_HIERFILE_4'.
        g_struct_t = 'Y_T_HIERFILE_4'.
      ENDIF.
      CREATE DATA gr_s_file TYPE (g_struct_s).
      ASSIGN gr_s_file->* TO <g_s_file>.
      CREATE DATA gr_t_file TYPE (g_struct_t).
      ASSIGN gr_t_file->* TO <g_t_file>.
    * Nodes
      REFRESH <g_t_file>.
      LOOP AT g_t_hierstruc INTO g_s_hierstruc.
        CLEAR <g_s_file>.
        MOVE-CORRESPONDING g_s_hierstruc TO <g_s_file>.
    * Texts for nodes
        READ TABLE g_t_thiernode INTO g_s_thiernode WITH TABLE KEY
        langu = p_langu
        hieid = g_s_hierstruc-hieid
        objvers = rs_c_objvers-active
        nodename = g_s_hierstruc-nodename.
        IF sy-subrc = 0.
          MOVE-CORRESPONDING g_s_thiernode TO <g_s_file>.
        ELSE.
    * Texts for characteristic values
          REFRESH g_t_chavlinfo.
          CLEAR g_s_chavlinfo.
          g_s_chavlinfo-c_chavl = g_s_hierstruc-nodename.
          APPEND g_s_chavlinfo TO g_t_chavlinfo.
          CALL FUNCTION 'RSD_CHAVL_READ_ALL'
            EXPORTING
              i_iobjnm                  = g_s_hierstruc-iobjnm
              i_langu                   = p_langu
              i_dateto                  = p_dateto
              i_check_value             = space
              i_sid_in                  = space
              i_hieid                   = g_s_hiedir-hieid
              i_objvers                 = g_s_hiedir-objvers
            CHANGING
              c_t_chavlinfo             = g_t_chavlinfo
            EXCEPTIONS
              info_object_not_found     = 1
              routines_generation_error = 2
              check_table_not_existing  = 3
              text_table_not_existing   = 4
              OTHERS                    = 5.
          IF sy-subrc = 0.
            READ TABLE g_t_chavlinfo INTO g_s_chavlinfo INDEX 1.
            IF sy-subrc = 0.
              MOVE-CORRESPONDING g_s_chavlinfo-e_chatexts TO <g_s_file>.
              ASSIGN COMPONENT 'LANGU' OF STRUCTURE <g_s_file> TO <g_langu>.
              IF sy-subrc = 0.
                <g_langu> = p_langu.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
    * Intervals
        IF g_s_hierstruc-intervl = 'X' AND p_inter = 'X'.
          READ TABLE g_t_hierintvl INTO g_s_hierintvl WITH TABLE KEY
          hieid = g_s_hierstruc-hieid
          objvers = rs_c_objvers-active
          nodeid = g_s_hierstruc-nodeid.
          IF sy-subrc = 0.
            MOVE-CORRESPONDING g_s_hierintvl TO <g_s_file>.
          ENDIF.
        ENDIF.
        APPEND <g_s_file> TO <g_t_file>.
      ENDLOOP.
    * Download output table
      g_fname = p_fname.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = g_fname
          write_field_separator   = space
        TABLES
          data_tab                = <g_t_file>
        EXCEPTIONS
          file_write_error        = 1
          no_batch                = 2
          gui_refuse_filetransfer = 3
          invalid_type            = 4
          no_authority            = 5
          unknown_error           = 6
          header_not_allowed      = 7
          separator_not_allowed   = 8
          filesize_not_allowed    = 9
          header_too_long         = 10
          dp_error_create         = 11
          dp_error_send           = 12
          dp_error_write          = 13
          unknown_dp_error        = 14
          access_denied           = 15
          dp_out_of_memory        = 16
          disk_full               = 17
          dp_timeout              = 18
          file_not_found          = 19
          dataprovider_exception  = 20
          control_flush_error     = 21
          OTHERS                  = 22.
      IF sy-subrc = 0.
        MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
        WITH 'Hierarchy download successful!'.
      ELSE.
        MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Diogo

  • Download and upload of file to server dir (AL11)

    Hello,
    I have a custom program that is downloading files from application server directory (they are like templates) to user local pc. User is then modifying such files and finally upload them in another AS directory.
    The program is currently making use of FM's C13Z_FILE_DOWNLOAD_BINARY and  C13Z_FILE_UPLOAD_BINARY.
    There was no problem until hot packages have been implemented: now such FM's are returning an error saying:
    Internal program error; (YDOWNLOAD SAPLC13Z 0 C13Z_RAWDATA_WRITE)
    When in debug, it appears that the FM C13Z_RAWDATA_WRITE (called by the above mentioned FM's) is checking the calling program (sy-cprog) and if this latter is not within a list of standard programs (hardcoded), then the error is thrown.
    My question is: Is there another way to download and upload files without such error? Could you please share the code?
    Thanks a lot for help and suggestions!
    Best regards,
    JFlanders

    Hello,
    Please see note   1809258 - Internal program error; ( <program name> SAPLC13Z 0 C13Z_RAWDATA_READ )
    A possibile solution is to use cl_gui_frontend_services class methods like gui_download and gui_upload, for instance:
    TYPES: t_line(1) type x.
    DATA: i_tab TYPE STANDARD TABLE OF t_line,
        i_wa(1) type x.
    OPEN DATASET lv_file_appl FOR INPUT IN BINARY MODE.
    DO.
      CLEAR i_wa.
      READ DATASET lv_file_appl INTO i_wa.
      IF SY-SUBRC <> 0.
        EXIT.
      ELSE.
        APPEND i_wa TO i_tab.
      ENDIF.
    ENDDO.
    CLOSE DATASET lv_file_appl.
    DATA: lv_fn TYPE string.
    lv_fn = lv_file_name.
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename                = lv_fn
        filetype                = 'BIN'
        append                  = ' '
      CHANGING
        data_tab                = i_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception  = 20
        control_flush_error     = 21
        OTHERS                  = 24.
    * old functioanlity
    *    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_BINARY'
    *      EXPORTING
    *        i_file_front_end       = lv_file_name
    *        i_file_appl            = lv_file_appl
    *        i_file_overwrite       = 'X'
    ** IMPORTING
    **    E_FLG_OPEN_ERROR          =  false
    **    E_OS_MESSAGE              =  lv_message
    *    EXCEPTIONS
    *      fe_file_open_error       = 1
    *      fe_file_exists           = 2
    *      fe_file_write_error      = 3
    *      ap_no_authority          = 4
    *      ap_file_open_error       = 5
    *      ap_file_empty            = 6
    *      OTHERS                   = 7
    This is for the download, similarly should be done for the upload.
    Hope this could help. Let me know if further details are needed.
    Thank you and bye,
    Flavio

  • Download and upload zcl_class

    how i can download and upload zcl_class??

    I copied - created - and ran program YRS_CLASS_UPLOAD_XML to try to upload xml i got from the internet on utilizing the new alv object model named refactoring.zip.   When I run this program to try to upload, I get an error on statement in a method of CL_XML_DOCUMENT where is does a select single LO_CLASS from BDS_LOCL into  l_class.  If does not find the following types in the table BDS_LOCL for C_BDS_CLASSNAME  value of  CL_XML_DOCUMENT and C_BDS_CLASSTYPE value of  CL.  Any help at this point?

  • Downloading and uploading smartforms

    hi all,
           for downloading a script we  have a program RSTXSCRP. in a similar way is there any way to download and upload smartform.
    regards,
    lakshya

    HI,
    in smartforms u can directly downlload and upload  all the smartfroms using the initial screen of smartforms  upload  and download form.

  • After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

    After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
    == This happened ==
    Every time Firefox opened
    == today 5/24/10 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
    See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

  • PO header attachment download and upload

    Hi All,
    I have requirement to download the attachments attached at Purchase Orders(PO) header level . And then from the downloaded file , I further want to upload it to another target system.
    I have already uploaded the PO at target system but header level attachments were missed out.
    My source and target system is in Ver 4.6C
    Please let me know -
    1. All tables that are involved in storing the attachments at header level for purchase orders.With this I can upload attachments directly to the target system tables.
    2.Any Function module for download and upload the attachments of PO at header level.
    I will appreciate any help to do this .
    Thanks
    Deepak

    Hi ,
    Thanks for suggestion.I Have used FM SO_ATTACHMENT_INSERT to insert Attachment. SOOD table is getting updated. But still PO header level attachment is missing. I think FM only update the table SOOD and do not ensure to put the attachment to the right Purchase order.
    Please let me know if you have an Idea how to put attachments to PO header level.Let me know tables that can be directly updated in order to attach the attachment to PO header level.
    Thanks
    Deepak

  • Function module to choose the file for download and upload

    what is the function module to choose the file for download and upload  for presentation server.
    give me with example

    Please search in SCN.
    This has been discussed so many times.

  • Download and Upload smartform in 4.6c

    I have the requirement to download and upload the smartforms in 4.6c. I need the help, which standard function module will solve the problem.
    Thanks .
    Vinayak.

    Hi,
    Use Transaction "Smartforms" -->Enter Smartform Name
    -> Utilities> Download form
    This will down load smartform in XML format.
    Use the Utilities--> Upload for upload the form .
    Please sure the upload file is in XML format.
    Hope this will help you.
    Lanka

  • Download and Upload(!) ABAP-Source and DDIC-Objects?

    Hi,
    is there a standard transaction or third party tool
    to download and upload(!!) ABAP-Source (function modules,
    function groups, module pools, reports...) and DDIC-Objects
    (tables, structures, data elements) to a local file system?
    In terms of uploading these objects it would be desirable
    that the transaction/tool creates packages/development classes/.. on its own.
    I would need that to copy the same source and ddic-objcets to different customer systems without doing it "manually" everytime.
    Does anyone know advice?
    Thank you,
    Bernhard

    Hi Bernd,
    look here :
    Re: how to download pf-status and upload in another system
    Andreas

Maybe you are looking for

  • Sap pp-Procurement type u2018Xu2019

    What is use of Procurement type u2018Xu2019 in MRP2 screen, & how system plans if we enter this key and how it is affected or related with MRP?

  • How to expose Hibernate 'non' conventional beans into flex apps via remoting

    I am relatively new to the flex world. I am from the Spring/Hibernate world. In Hibernate, the POJO object or domain object , or simply beans that you use to persist you object into the database does not have to follow the bean definition/contract, i

  • CFM2 Activate the Integration Model

    Hi Gurus, I have created the integration model using CFM1 and when I try to activate the Integration Model in CFM2 I get an error "OUTBOUND QUEUE BLOCKED". SYSTEM: PAPCLNT400 FUNCTION: /SAPAPO/CIF_PROD_INBOUND TEXT: THE ABAP/4 OPEN SQL ARRAY INSERT R

  • BAPI_FUNCLOC_CREATE : Main work center and plant associated

    Hi,   I'm trying to create Functional locations using BAPI BAPI_FUNCLOC_CREATE. I got almost all the fields except 'MAIN WORK CENTER' and 'PLANT  Associated with main work center'. Please advise me the relevant fields in the importing parameters of t

  • How can I download a video to my iPad?

    Hi, I am watching (with safari) a video at coursera (coursera.org) with an iPad, I would like to download it to see it later. I know I can do it with iTunes, but I want not to use my MBP. How can I download it? Regards