Download Basket approval

Hi All
Hope this is a simple one, but how do I tell Solution Manager which (or who's) Download basket to approve.
I've install SolMan 7.0 EhP1 and am looking for updated SP's. I've created a new Minatenance Transaction, found and selected the desired SP's and am now trying to approve the files in my download basket. But SolMan is looking at the other Basis Team members download basket.
So my question is how do I approve the SP's in my DOwnload basket?
Ken

>
Ken Halvorsen wrote:
> Ahh... Yes, we only have the client Basis Team member's user id in aisuser.
>
> So, can:
> 1 - we have 2 user id's identified in this transaction
> 2 - does the user id have to be associated with the client (for example being a consultant of the company)
>
> Ken
Hi Ken
You can have as many userid's as you want in AISUSER. Normally this table is filled with Userid's who will send messages to SAP via Service Desk and will use the Maintenance Optimizer.
Secondly the S user associated with the userid should be linked to the customer ( client in your case ) number. It should have authorizations to download Software from the Marketplace. You cannot use a S userid from a consulting company with the client as it will not match with the authorizations needed.
Hope that addresses your query.
Regards
Amit

Similar Messages

  • Download basket approval list problem

    hello
    my problem is my maintaince optimizer on solman is working fine it shows the file in download basket ,
    the problem is it will not show the file of approval list  so i am not been able to approve the files selected by me.
    help anyone
    thanks in advance.

    Hi
    Normally there will not be an issue for approving  if your maintanance optimizer is configured fine with the SUSER ID which has relevant authorization. I would suggest you to go through https://cw.sdn.sap.com/cw/docs/DOC-11236 for the correct procedures .
    regards,
    Nibu Antony

  • Clear approval list in download basket

    Hi All,
    I have a situation in the process of up gradation
    using mopz i  had choosed wrong level of sp stack so all my files are in approval list of the download basket.
    now i dont want them any more and request a new set of sp stack in upgrade process using mopz.
    is this possible for me to delete them manually, or raise a sap note so that they would do it for me.
    if i delete them ,will those files be available for me when ever i want them in any ways.
    again put them in download basket and then download when ever i want. i.e using new transaction.
    please advice,
    Vardhan.

    Hi,
    you can delete from the up button "delete".
    system must alllow you to download again, whenever required with new transaction.
    Again it goes to same download basket, use MOPZ to approve it, and use Download manager to download it in your desktop
    Thanks
    Jansi

  • How to approve my netweaver2004s SP12 - placed in the download basket

    This is a question of how customers which is running there SAP systems
    in a closed network, should deal with the fact that they cant download
    the SAP software they need, without creating a message to XX-SER-SAPSMP-
    SDM asking to approve the ordered software in the customers download
    basket.
    As we don't have a Solution Manager System which can connect to SAP, we
    cant approve our selected downloads.
    I am just looking for a procedure to approve my selected downloads, as
    i think i in the future will be annoyed if i have to send a message
    each time i need to download software.
    Do i have to install a Solution Manger System outside my closed network ?
    and if how do it setup this SOLMAN system which cannot access my other SAP systems ?
    Regards
    Michael

    Hi Micheal,
    Unfortunately, you will need to install Solution Manager to approve your own downloads.  You don't have to install it outside your closed network, but you will need to install SAPROUTER.
    SAPROUTER will allow you to connect to SAP securely.  It's basically a port based firewall.  Documentation on SAPROUTER can be found:
    http://service.sap.com/saprouter
    There is a very good document which provides step by step instructions on how to setup the maitenace optimizer (which is repsonsible for downloads). http://service.sap.com/solutionmanager -> Maintenance Optimizer -> Step by step guide.
    If you have more specifc questions let me know...
    Please award points if helpful...

  • Problem with Download Basket

    Dear Experts,
    My download basket is not updated properly, whenever I had select new components to download and goes to download basket it remains empty.
    Thanks in Advance
    Regards,
    Rakesh

    Hi,
    - ensure that your SAP Download Manager is the newest.
    - for SAP R/3, all patches, support package or installation package downloaded from service.sap.com will be automatically appear on SAP Download Manager
    - for SAP ERP2005 (ECC) some package needs to be approved via SAP Solution Manager - Maintenance Optimizer before this package appears on SAP Download Manager.
    hope it help you.
    rgds,
    Alfonsus Guritno

  • How to empty Download Basket

    Hi,
    Since there are too many contents in download basket, I am getting below message on service market place:
    Gateway Timeout
    The proxy server did not receive a timely response from the upstream server.
    Reference #1.8a4fe3c.1247504174.ec42974
    and while trying to approve from solution manager it is taking more than one hour to approve content in download basket, so to speed up the approval process I want to cleanup download basket.
    please suggest me the alternate way for cleanup the contents.
    thanks in advance..
    regards,
    Gokul

    Hi Gokul,
    The other alternative you can try is: Install SAP Download manager on your dekstop (if you don't have it already), then once you configure the Download manager, it will show you your download basket. here you can select the item and then select "Object" - Remove from Download basket.
    For installing download manager, http://service.sap.com/~sapidb/002006825000000233132001/
    Regards,
    Debasis.

  • Download basket - Syntax error in program "/TMWFLOW/CL_MO_UPDATE_MODEL===CP

    Hello,
    When trying to download anything from the basket, I get the following dump:
    Syntax error in program "/TMWFLOW/CL_MO_UPDATE_MODEL===CP ".
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "/TMWFLOW/CL_MO_HTML_REQUEST===CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program
         "/TMWFLOW/CL_MO_UPDATE_MODEL===CP " in include
         "/TMWFLOW/CL_MO_UPDATE_MODEL===CM005 " in
        line 11:
        "Type "MOPZDT_TRANS" is unknown"
    The current ABAP program "/TMWFLOW/CL_MO_HTML_REQUEST===CP" had to be
      terminated because it has
    come across a statement that unfortunately cannot be executed.
    I have on my system: SAPKITL429.
    Any help would be helpful.
    Thanks.
    Edited by: Jordy_tof on Sep 19, 2011 7:39 PM

    Hello,
    Thanks for the notes, really useful.
    Meanwhile I have found a back way to download from solman:
    http://www.erpgenie.com/sap-technical/basis/trick-approve-download-basket-via-solution-manager
    Hope it will help all.
    Thanks again,
    Jordan.

  • Downloaded patches approval from Solution manager

    Hello All,
    We have solution manager intalled and configured.I am in the process of doing post installation activities like patch updations to latest stack.From service market place,i have added required patches to download basket and at the end of screen it says require approval.
    Please suggest as how to approve them from SOLMAN after logging into it.
    Rgds
    Gadde.

    Hi,
    Please configure maintaince optimizer in solution manager and then only you can able to approve the patches.
    please use the link mentioned in the above reply.
    Thanks & Regards,
    Vidyadhar K

  • Maintenance Optimizer, approval step of download basket

    Hello!
    Im trying to download an update for our portal from the SAP web site, using download manager. But i can't get the file in download because this one has to be approve. I ve seen that this is done in Solution manager, but i can't find how to do it.Does someone know the step to solve this probleme?
    Thanks & Regards
    Chris

    Hi,
    Have you setup maintenance optimizer?
    The first Pre-requisite to setup maintenance optimizer is
    SOLMAN to be
    SP10
    Also check these
    [Tutor|https://websmp201.sap-ag.de/~sapidb/011000358700006477102006E.sim]
    [Note|https://websmp201.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1024932&_NLANG=E]
    This will solve your problem.
    Feel free to revert back.
    --Ragu

  • Download basket content could not  read

    Dear Consultant
    I have downloaded and installed the SAP download manager. I have
    configured the download manager and the screen shot for configuration
    is
    attached. During the runing of download manager. I am getting the below
    messages:
    "The basket content could not ne read. The following exception occurred:Unable to read data from the SAP Service Marketplace: Check your settings and try again"
    But I am getting the below message before getting error as below: The
    message show thatit is connecting but could not redirect to the respective url
    Reading your basket content (Connecting to www.service.sap.com)
    Redirecting to websmp205.sap-ag.de
    Redirecting to websmp108.sap-ag.de
    Redirecting to websmp105.sap-ag.de
    Redirecting to websmp206.sap-ag.de
    Redirecting to websmp208.sap-ag.de
    Redirecting to websmp207.sap-ag.de
    Redirecting to websmp101.sap-ag.de
    Redirecting to websmp103.sap-ag.de
    Requestyou to please provide the solution: The system details are as
    below
    1.Operating System : Window XP (SP2)
    2. Java Run Time Version 1.4.2_19
    Regards
    Vimal Pathak

    Hi
    Thanks
    I have checked nothing like this ..
    This is error coming as a socket error.
    I have downgraded the java ..but still getting the same
    error.
    Regards
    Vimal

  • Download PO approval app Issue

    Hi All,
    While downloading the PO approval app from /UI5/UI5_REPOSITORY_LOAD i am not able to download index,main and maindetails view and the resource folder is also empty.
    is there any another way to download or help out to replace this file.
    Thanks,
    Rakesh R
    Message was edited by: Michael Appleby

    Hi Rakesh,
    There is no index.html. Component.js is used.
    Please take a look SAP Fiori Launchpad for Developers - Architecture Overview.
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Download basket

    I want to download "Docu: SAP BP Engineering, Construction & Operations V1.604" file name 50101034. To download this file, I need the approvement of SAP Export Department. This is the message from SAP "In order to review and process your request, please, contact SAP Export Department via customer ticket using component XX-SER-SWFL-EXPORT. As soon as your request has been approved you can download the files."
    How can I contact to SAP Export Department ? Please help me!
    Thanks in advance

    Go through the following notes which may help you
    =>  Note 1367835 - Temporary Software download procedure, non-civil industries
    =>  Note 1468595 - Support Package Stacks: Export Check
    thanks
    G. Lakshmipathi

  • Download patch,approval

    Hello, craig,
    today I downloaded NETWEAVER 7.0 Patch (SP14-SP20), need for approval, please help me approval, thank you!

    You need to appove the package via Maintainance Optimizer in Solution Manager.
    Read,
    http://service.sap.com/mopz
    Regards
    Juan

  • SAP ERP6  product version missing in SMSY for EHP4 upgrade Solman 7

    Hello
    I am trying to install Ehp 4 but when i try to create the new system as SAP ERP6 in solution manager (SMSY )but  product version is missing  ?
    iam now stuck any ideas will be welcome as i need to get the stack.xml  inorder to proceed with EHP installer

    Hi,
    Check below notes before proceeding with EHP download in solman,sap has recommaned to apply these notes when we tried to download EHP,
    Must Implemeted
    1238929 MOPZ: Solution Is Not Selected in Work Center
    1240389 Maintenance optimizer transaction with incorrect Java host
    1243197 MOPZ: Add Caption for Product and Stack of Stack Delta XML
    1246549 Status were reset to step 1 after Download Basket approval
    1247550 present all avaliable systems in mopz step 1
    1250781 SMSY: Error for Java system components from the SLD
    1255219 Java systems w/o ABAP instance in maintenance optimizer
    1262239 SMSY: Database name *LOCAL
    1273095 SMSY: Incorrect database server (Java)
    1306173 Maintenance Optimizer: Enhancement Package Stacks
    1308152 MOPZ: Check configuration for stack delta XML generation
    1311841 Maintenance Optimizer: Rename stack delta index file
    1319083 Maintenance Optimizer: Technical corrections
    1326123 MOpz: Error "Update product data in Solution Manager"
    1357565 MOpz: Maintain a system where EHP is installed
    1402615 Translate hostname in Mopz to lower case
    1407905 MOpz: Error when withdrawing in step 4
    Cannot be implemented, but manual steps must be performed.
    1141296 Solution Manager: ERP product data missing
    1165587 Maintenance Optimizer: Enhancement Package stack selection
    1277035 Solution Manager: EHP4 product data missing
    Between what is your present stack level of solman
    Regards
    Uday

  • Error while approving patch using solman.

    Hi All,
    I want to download Patch. So I had add it in my download basket.
    Now while approving that patch using Solution Manager Maintainance Optimizer I got error.
    The error is like " Condition REQUEST_IN_PROCESS is not checked without Change Management integration ". Due this error I am not able to approve the patch, so not possible to download it.
    Regards,
    Nisit

    Hi,
    Please see the below link.
    http://translate.google.co.in/translate?hl=en&sl=es&u=http://www.mundosap.com/foro/showthread.php%3Ft%3D15318&sa=X&oi=translate&resnum=2&ct=result&prev=/search%3Fq%3Dsap%2BREQUEST_IN_PROCESS%26hl%3Den
    Anil

Maybe you are looking for

  • Lenovo G560 Graphics related query.

    Hi, I have a Lenovo G560. The specifications are: Operating System: Windows 7 Home Basic 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533) Language: English (Regional Setting: aEnglish) System Manufacturer: LENOVO System Model: 2

  • Acrobat 7 quits on printing Windows XP SP3

    Hi all Anytime I try to print a PDF from Acrobat it quits. I get an obscure memory reference error message. It's with any PDF, wheter I generate it from InDesign (printing to pdf or exporting) And it happens with PDFs I haven't created. I tried the D

  • Planned orders with excesseption messages

    Hello All, I want to creates a customised report for the planned orders with exception messages. In which table I get the required information?  User want the selection criteria as WBS, meterial codes  and material groups. Thats why I can not use the

  • Movie won't import into iDVD

    So I'm putting a couple movies onto iDVD and one just won't import. It's 46 minutes long and I'm thinking that may be the problem because the second movie is only 8 minutes and it imports just fine. I've converted the longer movie to AVI and WMV and

  • AddChildAt / DEPTH ISSUE

    I'm burnt out badly with the display list....but Merry Xmas I created two display objects on the main timeline. One is the a loader Object to load my movies into. The second object (container) is a movieclip in the library. The problem is, the loader