Download data from any site to XI

hi,
  I my scenario at sender side I am to login to a site, download the file to XI.
Which adapter I should use in this case. and how to do it.?
Yours response will be appreciated ............
Thanks,
Jaideep

ViJaYaNt JhA wrote:>
> 1. Download the file from site to file server location or XI server (based on basis recommendation).
> 2. The file will be picked by XI from thier by receiver file adapter.
Hi Vijayant,
Just for your information, The file is picked by Sender File Adapter not by Receiver File Adapter.
Regards,
Sarvesh

Similar Messages

  • Unable to download anything from any site using No...

    Hi
    I am using nokia e5 smartphone. I am unable to downlaod songs from any site using the default Nokia browser, i am unable to download an Opera Browser even, whereas my current internet pack is active and other applications like Wwhatsapp work fine.
    Please help!

    hi mate,
    have you tried uninstalling then reinstalling Nokia Browser from http://download.browser.ovi.com ? also try the same with Opera at http://m.opera.com Also check that you are fully up to date with your phone firmware by using Nokia Suite to check for any firmware updates.

  • When trying to download videos from any site i get the message cannot create target file

    I have tried uninstalling firefox and video download helper then reinstalling them and changing the destination folder and resetting the commands .

    Do you see a "3G", "E", or "o" next to the carrier name and signal indicator on the phone? If not, then you are not connected to a cellular data network at all. It's not impossible that you're not in range of their data network. Who is your carrier and where are you located?
    If you do see one of those, you may want to call them again and ask explicitly to have them check the provisioning on your account.  Just because it looks right in the billing system does NOT mean they have it set up correctly.

  • Can someone tell which player I should use to run flv,avi file in my iPad 3 after download from any site ????

    Can someone tell me which player I should use to run flv,avi file in my iPad 3 after downloading video from any site ????

    Can someone tell me which player I should use to run flv,avi file in my iPad 3 after downloading video from any site ????

  • Why i cannot download From any site short videos ntwith Iernet Download Manager in new Mozilla Firefox?

    '''
    Why i cannot download From any site short videos with Iernet Download Manager in new Mozilla Firefox?'''
    I want to install the new version,but the Last one it is
    Better.
    Thank you ...

    You need to update Firefox to 3.6.17 via Help | Check For Updates.
    Then install this add-on: https://addons.mozilla.org/en-US/firefox/addon/flash-video-downloader-youtube/
    Some security issues affecting your system.
    Go to Tools | Add-ons | Plugins and disable "Fun Web Products Plugin". This is spyware.
    Update the following plugins.<br><br>
    * Adobe Flash via http://get.adobe.com/flashplayer/<br><br>
    * Adobe Shockwave For Director via http://get.adobe.com/shockwave/<br><br>
    * Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO<br><br>
    * Java via http://www.java.com/en/<br><br>
    Here's the relevant Adobe security advisory: http://www.adobe.com/support/security/advisories/apsa11-02.html

  • Hi. Having trouble viewing a downloaded file from a site. iPad is telling has not got a app to open file ,but have downloaded so many now and none of them are any help. Tried this on my android phone still nothing. Please can anyone help as slowly ma

    HHi having trouble viewing a downloaded file from a site my iPad is telling me I don have a app to open file . And have downloaded loads of apps and still no joy . Have tried this on my android phone to and still nothing. Please can anyone help as slowly going crazy. Thanks tim

    What type of file?  From what site?  What Apps have you downloaded for it?
    Perhaps if you provide details of what you are doing we can provide more precise help.

  • Unable to download document from HTTPS site in ADF

    Hi ADF Experts,
    I have a critical issue in ADF application. While clicking on hyperlink for download a document ,i am getting following error:
    "unable to download home from "<HTTPS SITE NAME>"  The link is having HTTPS.
    This problem is occurring in i.e 8, It's working fine in i.e 9.
    Please suggest me with some solution.

    hi mate,
    have you tried uninstalling then reinstalling Nokia Browser from http://download.browser.ovi.com ? also try the same with Opera at http://m.opera.com Also check that you are fully up to date with your phone firmware by using Nokia Suite to check for any firmware updates.

  • Load Data from Remote site

    Hello every one,
    I tried to load the data from remote site to stagging area with DB link, i used append hint and it gave this error, I was just wondering?
    ERROR at line 1:
    ORA-12840: cannot access a remote table after parallel/insert direct load txnORA-06512: at "JAMES.PKGCONVERSION", line 464
    any help please thank you
    i am not using all the columns, i am using selec in the insert. Thank you in advance
    Message was edited by:
    user553284

    I had commit after three inserts, I changed commit after each insert, it is working now,
    Does that really matter?
    Any idea please.
    Thank you

  • Error message: when downloading data from 2nd display tag table

    I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
    Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
         at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
         at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
         at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
         at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:595)
    As per the Exception i don't have any jsp tag before the display tag.
    Please help me if any body has any solution for the above exception.
    Thanks in advance.
    Smruti..

    See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • How to download data from an internal table to a text

    Hi All,
    I want to download data  from an internal table to a text file.
    The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
    The sample of the desired data that i require should be this way:-
    13456TR|M|COUP|MATERIAL|KGS
    Thanks in advance.
    Regards
    Satish.

    Hi,
    Try this..
    REPORT  zc1download message-id zc1dwnmsg.
    *& Declaration Section for the Tables *
    TABLES: makt.
    *& Declaration Section for the Internal Tables
    DATA: intab TYPE TABLE OF makt,
          wa_intab LIKE LINE OF intab,
          no_of_rec TYPE i,
          count TYPE i.
    DATA: BEGIN OF f_intab,
            str(255) TYPE c,
          END OF f_intab.
    DATA: t_intab LIKE TABLE OF f_intab,
          w_intab LIKE LINE OF t_intab,
          temp(255) TYPE c.
    FIELD-SYMBOLS: <f> TYPE ANY.
    *& Selection ScreenSection for the file download
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
                tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
                others RADIOBUTTON GROUP rad1,
                delimit TYPE c.
    SELECTION-SCREEN END OF BLOCK b1.
    START-OF-SELECTION.
      IF file IS INITIAL. " check to ensure file.
        MESSAGE i001.
        EXIT.
      ENDIF.
      IF others = 'X'.    " check to ensure delimiter.
        IF delimit = ' '.
          MESSAGE i002.
          EXIT.
        ENDIF.
      ENDIF.
      SELECT * FROM makt INTO TABLE intab.
      IF tab = 'X'.       " default delimiter tab is used
          CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'DAT'
            mode                    = 'A'
          TABLES
            data_tab                = intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ELSE.             " If user defind delimiter is to be used
                  Counts the number of fields                *
        DO.
          ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
          IF sy-subrc <> 0.
            EXIT.
          ELSE.
            count = count + 1.
          ENDIF.
        ENDDO.
        LOOP AT intab INTO wa_intab.
          DO count TIMES. " Adding the delimiter in required places
            ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
            CONCATENATE temp delimit <f> INTO temp.
          ENDDO.
          SHIFT temp.
          APPEND temp TO t_intab.
          CLEAR temp.
        ENDLOOP.
        CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'ASC'
            mode                    = 'A'
          TABLES
            data_tab                = t_intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
      WRITE:/ 'The Data has been tranfered to :', file.
    Cheers
    Kathir!~

  • Downloading data from a BLOB Field using mod_plsql

    Hi,
    I am trying to use the mod_plsql to download data from a blob field, I have a web page where I can pick the file name to be downloaded from the documents table This table has the BLOB field that has the Data formatted in a text file format(contains carriage returns), when I open it up in the browser it is displaying it correctly , but when I right click on the file name and choose "Save Target As" and save it as text file it is ignoring the carriage returns and displaying entire blob in one line.
    Can somebody help me figure out why it's not recognizing the carriage returns?
    Any help would be greatly appreciated.
    Thanks

    Hi and welcome to the forum.
    Is there a way to retrieve data from a blob field and save it to temp table.Why would you want to do that?
    Can you provide some more details regarding your requirement?
    (Don't forget to mention your database version as well)
    Also, I wonder why you've added a 'decompress' tag to your question?
    edit, after seeing Tubby's reply
    Dang, the connection must be frozen here ;)
    Edited by: hoek on Jan 6, 2010 9:06 PM

  • Download data from multiple tabs of ALV to tabs of Excel

    Hi,
    I have a requirement where ALV is being displayed in 6 tabs. Can a download functionality be provided in such a way that data from all the tabs gets downloaded into multiple sheets of Excel document.
    In the attached file, expected output with ALV in multiple tabs is displayed. Are there any Function modules which can be used to download data from ALV in each tab into Excel document sheets in one go?
    Thanks,
    Tejaswini.

    This is a FAQ, did you use search tool with keywords like worksheet, activate and OLE to find many threads and (some examples)
    a sample like XLSX Upload - A Unified Approach
    a project like abap2xlsx
    Regards,
    Raymond

  • Download data from IT to Locl Server

    Hi Friends,
    I have writte the entire code for my purposr. All i have to do is download data from an Internal table to the local server as a text file.
    I am having problems in appending statement.
    I am not getting the proper data into it_outfile.
    *Tables
    TABLES : zz0010.
    *Internal tables Decleration
    DATA : it_zz0010 LIKE zz0010 OCCURS 0 WITH HEADER LINE.
    DATA : g_repid LIKE sy-repid.
    DATA : it_outfile(200)  OCCURS 0 WITH HEADER LINE.
    *Selection-Screen
    SELECTION-SCREEN: BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
    PARAMETERS :      p_file LIKE rlgrap-filename.
    SELECTION-SCREEN: END OF BLOCK 1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name = g_repid
        IMPORTING
          file_name    = p_file.
    START-OF-SELECTION.
      SELECT *
             FROM zz0010
             INTO TABLE it_zz0010.
    END-OF-SELECTION.
      LOOP AT it_zz0010.
        it_outfile       = it_zz0010-mandt.
        it_outfile+(3)   = it_zz0010-matnr.
        it_outfile+(21)  = it_zz0010-auart.
        it_outfile+(25)  = it_zz0010-datab.
        it_outfile+(33)  = it_zz0010-datbi.
        it_outfile+(41)  = it_zz0010-zzcoe.
        it_outfile+(45)  = it_zz0010-zzend.
        it_outfile+(63)  = it_zz0010-zzfide.
        it_outfile+(73)  = it_zz0010-zzdos.
        it_outfile+(88)  = it_zz0010-zzusl.
        APPEND it_outfile.
        CLEAR : it_outfile.
      ENDLOOP.
    *Local File
      CALL FUNCTION 'DOWNLOAD'
        EXPORTING
          filename                = p_file
          filetype                = 'ASC'
        TABLES
          data_tab                = it_outfile
        EXCEPTIONS
          invalid_filesize        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          customer_error          = 7
          OTHERS                  = 8.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Any suggestions or changes to the code.
    Shejal.

    Hi,
    I think it should like this.
    LOOP AT it_zz0010.
    <b>it_outfile(3) = it_zz0010-mandt.
    it_outfile+3(18) = it_zz0010-matnr.
    it_outfile+21(4) = it_zz0010-auart.</b>
    APPEND it_outfile.
    CLEAR : it_outfile.
    Regards,
    Ferry Lianto

  • What are the ways to download data from ods?

    Hi all,
    what are the ways to download data from ods?
      1. se11/se12
      2. listcube
      3. infospokes.
    Apart from the above 3 is there any other way to download data from my ods.
    I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
    Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
    thanxs
    haritha

    Hi Haritha,
    Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
    Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
    Now you should see and Excel Icon on top, click on it then select Table , then
    Microsoft Excel and it will open your data with all columns you want.
    I just tried for 213 columns
    Hope this helps.
    Thanks
    CK

  • Download data from infotypes

    Hi,
    My client wants me to download all the data in infotypes(std and custom) from production client. Then they will migrate this data to their new system. What would be the approach for downloading?
    1. Through SE16N (we are not authorized to use SE11/SE16)? But couldnt save the data to local file when we use se16n.
        even i get se11 authorization -> we can download only 64,000 records in excel. Do i need to split? or any other way?
    2. Write custom progms to download data from infotypes.
    3. Any data migration tools ?
    4. Basis can do client copy?
    Thanks!

    Hi,
    U can write a report to donwload data, but my preferde way is to use the hr toolbox (Transaction PU12), it's very simple to use .
    Here is a link to know how ti use it :
    http://shafiq.us/sap/index.php?option=com_content&view=article&id=47:hr-interface-toolbox-pu12&catid=36:pu12tutorial&Itemid=14
    i Hope it helps u.

Maybe you are looking for