Download data from MEK3

Hi Friends, Please Guide me on this Issue
Once User enters MEK3 Transaction and he follows below Steps to down load data from the table control
Enters the Condition Type
Clicks on -> Key Combination Button
Checks the Radio Button -> Purch Org / Plant/ Vendor and Continue
After Providing Inputs for
Purch. Organization, Plant, Valid on Date
User executes the report
Then the data is displayed in Table Control
Here the User needs to download the data which is displayed in the Table Control
By Navigating through SYSTEM -> LIST -> SAVE -> LOCAL FILE
Here LOCAL FILE is in display mode
So how can we make that LOCAL FILE to enable mode and achieve the Download functionality
Thanks & Regards
Ganesh
Edited by: ganesh yarramsetty on Mar 11, 2011 11:42 AM

Hi friends,
I am able to see the Authorization object "S_GUI" is assigned to my User ID by going to Transaction SUIM
This might help to download ALV reports
But my requirment is different
Please guide me
Thanks & Regards,
Ganesh
Edited by: ganesh yarramsetty on Mar 11, 2011 6:49 PM

Similar Messages

Download data from interactive report

Hi all. I'm on apex 3.1.1.00.09.
I have this problem: when I download data from interactive report I can download only in CSV and PDF. If I try to download into pdf it creates a file of only 1 KB.
I would know if I must configure my apex in order to download correctly in pdf and if I must configure it in order to download in doc and xls format.
Thanks all for collaboration,
Fabrizio

Thank you for your reply.
I am able to download the csv file, but my problem is: I don't want the column headings to show.
Is it possible to download only the data, not the column headings?

How to download data from a an external hard drive ?j

How to download data from an external hd ?

You need to copy the data onto your computer and transfer it via that (either via iTunes, or if the app that you want to transfer the data to supports, via wifi). Like the previous reply said, you can't do it directly without a computer being involved.

Error while downloading data from internal table into XML file

hi all,
i developed a program to download data from into internal table to xml file like this.
tables: mara.
parameters: p_matnr like mara-matnr.
data: begin of itab_mara occurs 0,
            matnr like mara-matnr,
            ernam like mara-ernam,
            aenam like mara-aenam,
            vpsta like mara-vpsta,
      end of itab_mara.
data: lv_field_seperator type c,     " value 'X',
      lv_xml_doc_name(30) type c,    " string value my xml file,
      lv_result type i.
      lv_field_seperator = 'x'.
      lv_xml_doc_name = 'my xml file'.
types: begin of truxs_xml_line,
          data(256) type x,
      end of truxs_xml_line.
types:truxs_xml_table type table of truxs_xml_line.
data:lv_tab_converted_data type truxs_xml_line,
     lt_tab_converted_data type truxs_xml_table.
data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
       rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
   I_FIELD_SEPERATOR          = lv_field_seperator
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
   I_XML_DOC_NAME             = lv_xml_doc_name
IMPORTING
   PE_BIN_FILESIZE            = lv_result
TABLES
    I_TAB_SAP_DATA             = itab_mara
CHANGING
   I_TAB_CONVERTED_DATA       = lt_tab_converted_data
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
open dataset lv_xml_file for output in binary mode.
loop at lt_tab_converted_data into lv_tab_converted_data.
transfer lv_tab_converted_data to lv_xml_file.
endloop.
close dataset lv_xml_file.
this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
will anyone show me the possible solution to rectify this error
thanks and regards,
anil.

Hi,
Here is a small sample program to convert data in an internal table into XML format and display it.
DATA: itab TYPE TABLE OF spfli,
      l_xml TYPE REF TO cl_xml_document.
* Read data into a ITAB
SELECT * FROM spfli INTO TABLE itab.
* Create the XML Object
CREATE OBJECT l_xml.
* Convert data in ITAB to XML
CALL METHOD l_xml->create_with_data( name = 'Test1'
                                     dataobject = t_goal[] ).
* Display XML Document
CALL METHOD l_xml->display.
Here are some other sample SAP programs to handle XML in ABAP:
BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
Hope this helps,
Sumant.

Error message: when downloading data from 2nd display tag table

I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
     at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
     at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
     at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
     at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:595)
As per the Exception i don't have any jsp tag before the display tag.
Please help me if any body has any solution for the above exception.
Thanks in advance.
Smruti..

See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

How to download data from an internal table to a text

Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.

Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
      wa_intab LIKE LINE OF intab,
      no_of_rec TYPE i,
      count TYPE i.
DATA: BEGIN OF f_intab,
        str(255) TYPE c,
      END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
      w_intab LIKE LINE OF t_intab,
      temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
            tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
            others RADIOBUTTON GROUP rad1,
            delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
    MESSAGE i001.
    EXIT.
ENDIF.
IF others = 'X'.    " check to ensure delimiter.
    IF delimit = ' '.
      MESSAGE i002.
      EXIT.
    ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'.       " default delimiter tab is used
      CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'DAT'
        mode                    = 'A'
      TABLES
        data_tab                = intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ELSE.             " If user defind delimiter is to be used
              Counts the number of fields                *
    DO.
      ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
      IF sy-subrc <> 0.
        EXIT.
      ELSE.
        count = count + 1.
      ENDIF.
    ENDDO.
    LOOP AT intab INTO wa_intab.
      DO count TIMES. " Adding the delimiter in required places
        ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
        CONCATENATE temp delimit <f> INTO temp.
      ENDDO.
      SHIFT temp.
      APPEND temp TO t_intab.
      CLEAR temp.
    ENDLOOP.
    CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'ASC'
        mode                    = 'A'
      TABLES
        data_tab                = t_intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~

Downloading data from internal table to xls file leading zeros are not disp

Hai abap gurus,
when i am downloading data from internal table to excle file. some field values in a column are with leading zeros and some others dont have leading zeros.but in the output it is showing without leading zeros. then how to get with exact values.
Ex:
<b>ECC Code.</b>
045234
88567
098456
but output is giving like this:
45234
88567
98456
how to get the actual values.....
plz help me in this matter.

Dear Kiran,
Those field in the internal table having Leading Zeroes, make those fields' datatype as character.
Then use the function module to download the content of the internal table to the excel file.
Regards,
Abir
Don't forget to Reward Points *

Downloading data from a different carrier

is it possible to set the iphone to download date from a different network,
im with telstra who have horrible data prices, so i i could manage to get a prepaid data pack through someone else it would be helpful. Otherwise ill just try to shut out 3g data from the phone and just do wifi.
thanks

Hello noboo79,
And welcome to Apple Discussions!
On the computer you have initially the set the iPod up on and for, you can enable the "manually manage music and videos" option from under the iPod's Summary tab in iTunes. This will allow you to sync contect to the iPod from multiple computers. Otherwise, there is no other way.
Here is more on using your iPod with multiple computers as well as manually managing your iPod's contents.
[Using iPod with multiple computers|http://support.apple.com/kb/ht1202]
[Managing content manually on iPhone, iPad, and iPod|http://support.apple.com/kb/HT1535]
B-rock

Downloading data from a BLOB Field using mod_plsql

Hi,
I am trying to use the mod_plsql to download data from a blob field, I have a web page where I can pick the file name to be downloaded from the documents table This table has the BLOB field that has the Data formatted in a text file format(contains carriage returns), when I open it up in the browser it is displaying it correctly , but when I right click on the file name and choose "Save Target As" and save it as text file it is ignoring the carriage returns and displaying entire blob in one line.
Can somebody help me figure out why it's not recognizing the carriage returns?
Any help would be greatly appreciated.
Thanks

Hi and welcome to the forum.
Is there a way to retrieve data from a blob field and save it to temp table.Why would you want to do that?
Can you provide some more details regarding your requirement?
(Don't forget to mention your database version as well)
Also, I wonder why you've added a 'decompress' tag to your question?
edit, after seeing Tubby's reply
Dang, the connection must be frozen here ;)
Edited by: hoek on Jan 6, 2010 9:06 PM

Download data from multiple tabs of ALV to tabs of Excel

Hi,
I have a requirement where ALV is being displayed in 6 tabs. Can a download functionality be provided in such a way that data from all the tabs gets downloaded into multiple sheets of Excel document.
In the attached file, expected output with ALV in multiple tabs is displayed. Are there any Function modules which can be used to download data from ALV in each tab into Excel document sheets in one go?
Thanks,
Tejaswini.

This is a FAQ, did you use search tool with keywords like worksheet, activate and OLE to find many threads and (some examples)
a sample like XLSX Upload - A Unified Approach
a project like abap2xlsx
Regards,
Raymond

Download data from IT to Locl Server

Hi Friends,
I have writte the entire code for my purposr. All i have to do is download data from an Internal table to the local server as a text file.
I am having problems in appending statement.
I am not getting the proper data into it_outfile.
*Tables
TABLES : zz0010.
*Internal tables Decleration
DATA : it_zz0010 LIKE zz0010 OCCURS 0 WITH HEADER LINE.
DATA : g_repid LIKE sy-repid.
DATA : it_outfile(200) OCCURS 0 WITH HEADER LINE.
*Selection-Screen
SELECTION-SCREEN: BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
PARAMETERS :      p_file LIKE rlgrap-filename.
SELECTION-SCREEN: END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = g_repid
    IMPORTING
      file_name    = p_file.
START-OF-SELECTION.
SELECT *
         FROM zz0010
         INTO TABLE it_zz0010.
END-OF-SELECTION.
LOOP AT it_zz0010.
    it_outfile       = it_zz0010-mandt.
    it_outfile+(3)   = it_zz0010-matnr.
    it_outfile+(21) = it_zz0010-auart.
    it_outfile+(25) = it_zz0010-datab.
    it_outfile+(33) = it_zz0010-datbi.
    it_outfile+(41) = it_zz0010-zzcoe.
    it_outfile+(45) = it_zz0010-zzend.
    it_outfile+(63) = it_zz0010-zzfide.
    it_outfile+(73) = it_zz0010-zzdos.
    it_outfile+(88) = it_zz0010-zzusl.
    APPEND it_outfile.
    CLEAR : it_outfile.
ENDLOOP.
*Local File
CALL FUNCTION 'DOWNLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'ASC'
    TABLES
      data_tab                = it_outfile
    EXCEPTIONS
      invalid_filesize        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      customer_error          = 7
      OTHERS                  = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Any suggestions or changes to the code.
Shejal.

Hi,
I think it should like this.
LOOP AT it_zz0010.
<b>it_outfile(3) = it_zz0010-mandt.
it_outfile+3(18) = it_zz0010-matnr.
it_outfile+21(4) = it_zz0010-auart.</b>
APPEND it_outfile.
CLEAR : it_outfile.
Regards,
Ferry Lianto

How to download data from spool to excel file

Hi,
I have requirement like....i need to download data from spool to excel file.
Please let me know the process how to download...
<removed by moderator>
<removed by moderator>
Thanks,
Khasimsa
Moderator message: please (re)search yourself before asking, do not assign priorities, do not offer re-ward
locked by: Thomas Zloch on Sep 8, 2010 1:18 PM

Hi try this way..
*FM called that returns the Spool Request Number data into and internal table
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
    EXPORTING
      rqident              = p_spool                     "Spool Request Number
      first_line           = 1
    TABLES
      buffer               = it_spool_xls                            "Internal table that will have the Spool Request No data
    EXCEPTIONS
      no_such_job          = 1
      not_abap_list        = 2
      job_contains_no_data = 3
      selection_empty      = 4
      no_permission        = 5
      can_not_access       = 6
      read_error           = 7
      OTHERS               = 8.
*To convert the spool data into excel format
CALL FUNCTION 'SO_RAW_TO_RTF'
    TABLES
      objcont_old = it_spool_xls               "Internal table having spool data
      objcont_new = it_xls_spool.           "Int table having Excel format data converted from Spool data
"call GUI down Load by passing it_xls_spool
Prabhudas

How to download data from itab to Excel sheet..

Hi sap Experts,
I develop one report to download data from itab to excel sheet.I done it perfectly.
My doubt is in the excel sheet i need to put headings. and also at last i need to display total no.of Records.
Please help me how to do this.
     Thanks in Advance....
Thanks and Regards
Siri.......................

u can either use GUI_DOWNLOAD or the method below...just give a try
DATA:WK_string TYPE STRING.
DATA:Wk_EXT(4) TYPE C value '.xls'.
DATA:WK_path TYPE STRING.
DATA:wk_file_name type string.
data:wk_records type sy-tfill.
wk_file_name = 'Downloaded'.
describe table itab lines wk_records.
LOOP AT ITAB.
at first.
**Provide path
concatenate 'C:\' wk_file_name Wk_EXT into wk_path.
open dataset WK_path for output in text mode encoding default.
if sy-subrc 0.
write:'ERROR while opening dataset !!!!!!'.
EXIT.
endif.
CONDENSE wk_path.
**Heading Part
concatenate 'Part No' 'Description'
     into wk_string separated by cl_abap_char_utilities=>horizontal_tab.
endat.
**Data ITAB
CONCATENATE ITAB-MATNR itab-maktx into wk_string
     separated by cl_abap_char_utilities=>horizontal_tab.
transfer wk_string to WK_path.
at last.
clear wk_string.
Concatenate 'Records Passed:' wk_string into wk_string.
transfer wk_string to WK_path.
close dataset WK_path.
endat.
endloop.

Download data from ui to excel

Hello Experts,
We have a requirement wherein, we need to download data from SAP CRM Web-ui (Assignment Block/View) to excel sheet(CSV) using a custom button.
Kindly help me in doing so.
Thanks,
Anubhuti Dixit

Hey Guys,
anybody has a answer on this issue?

Download data from memory to Excel format.

Hi Gurus,
    How can I download data from Memory( not in application server ) to Excel format ? Now I am using below function modules but not coming in proper format.
CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
            listobject = listobject
       EXCEPTIONS
            OTHERS     = 1.
CALL FUNCTION 'LIST_TO_ASCI'      "report to ASCII text
         TABLES
              listasci           = listasci
              listobject         = listobject
         EXCEPTIONS
              empty_list         = 1
              list_index_invalid = 2
              OTHERS             = 3.

Hi,
use this function module.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
Regards,
NNR.

Download data from MEK3

Similar Messages

Maybe you are looking for