Download Data Monitoring

G'day All,
Despite careful control of my downloads I'm suddenly finding that I'm getting massive (for me) 200mb downloads now and again that are blowing my monthly download quota out of the water. My server can offer no explanation other than to say that data usage is recorded but they have no way of knowing what that data is.
I don't allow software updates to be downloaded without my authority and all my incoming material is scrutinised and where applicable deleted from my Webmail. I operate satellite broadband and only have a modem, no other ancillary equipment.
Can anyone offer any advice please on how to ascertain where my phantom downloads may be coming from? Alternatively does anyone have experience in using a data monitoring programme that they have found successful? I have been told that "Surplusmeter" might be worth checking out.
No technical stuff please guys, as a Senior Citizen the advanced stages of senile decay are setting in...
Thanks in advance,
The Outback Kid

OK, that's great. Now, do you have the router's wi-fi turned on? My suspicion is that someone may be tapping in to your signal and piggy-backing off that. Here's how to check it.
1. Go to System Prefs >> Network. Make a note of the "Router" IP address. It's probably 192.168.1.254 or similar.
2. Open up your web browser and type that number in to the address bar.
3. This should open up the web admin page for your router. All manufacturers have there own design, but look for "Wireless", "Wi-Fi", "Home Network" or something like it. If you only use your one computer that connects by ethernet, and nothing else, then you can turn the wireless signal OFF.
Sorry I didn't get back to you, but I've been away.

Similar Messages

Error in EC-CS Data Monitor

Hi experts,
We have run the normal EC-CS posting after the month end closing. However data Monitor returns us an error for our parent unit in consolidation group. The error is "Item1&/Subitem &2: Discrepancy btw. Chgs in investee equity and totals DB" (error no GK 266)
I have read from SAP Note 673705, it seems like program error and I need to download the correction to fix it. Any other way to resolve this problem?
Thanks

Hello -
The consolidation ledger currency (group currency, I assume) is USD. The Consol Unit in question is EUR.
I checked the currency translation settings in the consol unit. There are four other units in the group, all with various currencies, which are working fine. We have another unit in another group that is EUR and it is working fine. We just added this one. I have compared it to the unit in EUR that works but can't find any differences.

How can I find download data history?

I downloaded a file of 46MB, but that is not in Network Pane in Activity Monitor. How can I find download data history?
Is there any application that can monitor all download and upload data, history etc.

From Apple App Store go here https://itunes.apple.com/us/app/magicanpaster/id427378978?mt=12 For Manual review Launch Terminal from /Applications/Utilities/ and enter the following command into a single line:
sqlite3 ~/Library/Preferences/com.apple.LaunchServices.QuarantineEventsV* 'select LSQuarantineDataURLString from LSQuarantineEvent'
Hit return to see the list of downloaded files

Safari downloading data "on its own"

Hi,
Yesterday I connected my iphone to use its 3G network with tethering. I browsed some sites and promptly received an SMS from my carrier, telling me that I had used all of my 500 MB of monthly data.
Surprised, I checked the "Tethering data" within the iphone settings, and sure enough, I had used about 300 MB in about half an hour of light browsing, which is very strange.
I started investigating and discovered that, sometimes, Safari starts downloading data while I'm doing nothing. Megabytes and megabytes of data. I don't know the source, and it's only input data, not output. I have checked with Activity Monitor, and closing Safari stops the data transfer. Opening it again resumes data transfer
Please note that I consider myself an advanced user, so I have googled a lot, checked that the pages aren't downloading any video in the background (in fact I use FlashBlock), etc. Even disabled automatic update for plugins, but no luck.
I have tried to reproduce the problem and it's kind of difficult because the rogue data downloading from Safari is quite random.
So, my question is, why is Safari downloading data on its own when I'm doing nothing, which data is it, and how can I stop Safari from doing it. It's eating up my connection and now I have to use Chrome to browse the internet, as Safari kills my 3G data plan.
Thanks!
Carlos

Install the free application "TinkerTool" (not "TinkerTool System"), select the Safari tab, and check the box labeled "Disable storage of preview images for web pages." Quit and relaunch Safari.

Downloading data to excel

Hi all,
I am downloading data to excel by using OLE2 type pool in an ABAP program.
My requirement is to make some of the columns of the excel sheet bold.
is it possible? if so please guide me.
LOOP AT IT_FINAL1 INTO WA_FINAL1.
    R_IND = 1 + R_IND.
    INDEX = 1 + SY-TABIX .
    CLEAR IND.
    DO.
      ASSIGN COMPONENT SY-INDEX OF STRUCTURE WA_FINAL1 TO <I_OUTPUT>.
      IF SY-SUBRC NE 0.
        EXIT.
      ENDIF.
      IND = SY-INDEX.
      CALL METHOD OF SHEET 'Cells' = CELLS EXPORTING #1 = INDEX
        #2 = IND. "1
      SET PROPERTY OF CELLS 'Value' = <I_OUTPUT>.
    ENDDO.
    CALL METHOD OF APPLICATION 'Cells' = CELL1
      EXPORTING #1 = 1
      #2 = 7.
    CALL METHOD OF APPLICATION 'Cells' = CELL2
       EXPORTING
         #1 = INDEX     "down
         #2 = 7.       "across
ENDLOOP.
I have used the above code.
here 7th column, 10th column, 13th column has to be made bold and so on.
regards,
samarendra.
Edited by: samarendra penugonda on May 26, 2009 12:57 PM

Hello,
Check this standard program it is printing some values in bold.
RSDEMO01
Example
SET PROPERTY OF H_F 'Bold' = BOLD .

Download data from ALV to excel issue

Hi All,
Could you please tell me if there has any restriction on ALV grid data download to excel? I've a report contains 68 columns and about 500 rows, I want to download the data using the standard menu list->export->save to local file. but after I download them, I found the first 65 columns display in one line and the rest columns display in next line, just like ALV do not allow too many characters in one row and have to switch to new line. I can hide some columns but it's very strange that even after i hide 3 columns to fit the 500 rows download, then if the rows increase, the same problem occurs.
I searched the forum and in the thread Re: Export ALV in EXCEL Issue Mr. Suvajit provided a solution by using menu List->export->spreadsheet, it looks very good. But I still want to know how this happen and is there a standard way to download data with more than 65 columns to local file with extension .xls so that user can open it directly?
PS: I'm using FM REUSE_ALV_GRID_DISPLAY and the SAP version is SAP ECC6 with kernal package SAPKB70103.
Thank you very much.
Best Regards,
Jeff
Edited by: Jeff_liu_2010 on Mar 10, 2011 7:21 AM

Hi Jeff,
Please check if following analysis is helpful to you.
Analysis/Solution:
When we export ALV data to excel worksheet, as sap notes say the maximum lenght allowed is 1023 charaters and the max no of columns supported is 90.
(I never faced any issue related to no of columns as it worked fine for columns >90 too)
Issue occured when row size of exported data gets more than 1023 character.
Therefore the row data must not exceed 1023 character, otherwise column splits and moves to next row.
One additional aspect generally missed is that:
When data in any particular column changes it's length, alv header also changes its lengh (short text, medium text, long text; depending on the length of of the longest cell in the column)
therefore even if you have total length of row less than 1023 character, there might be cases when your ALV header size exceeds this length.
Reducing the header size (by forcing to use short text or specifying own header names) should resolve the issue.
Regards,
Parveen

Problem in downloading data from application server

Hi,
I tried the following code for downloading data to PC in background:
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    LOOP AT itab INTO istab.
      TRANSFER istab TO p_file.
    ENDLOOP.
ENDIF.
Here, the contents are not getting transferred to the p_file. I give the path of the file while executing the program.
First of all, the file is not getting created in PC. And the statement 'OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT'. is working but unable to read after that using READ DATASET statement.

HI,
You can use this code .............
OPEN DATASET gv_dataset for input in text mode encoding default.
IF sy-subrc = 0.
    DO.
      clear gv_rec.
      READ DATASET gv_dataset INTO gv_rec.
      if sy-subrc <> 0.
        append gv_rec to gt_raw.
        exit.
      endif.
      append gv_rec to gt_raw.
    ENDDO.
    CLOSE DATASET gv_dataset.
ELSE.
    gv_retcode = 1.
ENDIF.
Regards,
jayan

How to download data into one cell of excel in different lines

Hi All,
My Report downloads data from R/3 to excel. Now one particular field contains multiple lines, which i needs to download into different lines into that particular cell(of excel). how can i do this.
I found one method for this and that is cl_abap_char_utilities=>newline.But this is in abap version 6.0.
But i am working in version 4.6c. do we have any method or anything that meets my requirement in 4.6c.
Please let me know.
Thanx in Advance
Subhani.

why do you split them to the internal table ,then download it?
Is you special field long text?
If is ,you can use FM READ_TEXT to put it into an internal table ,then download it.

Download data from interactive report

Hi all. I'm on apex 3.1.1.00.09.
I have this problem: when I download data from interactive report I can download only in CSV and PDF. If I try to download into pdf it creates a file of only 1 KB.
I would know if I must configure my apex in order to download correctly in pdf and if I must configure it in order to download in doc and xls format.
Thanks all for collaboration,
Fabrizio

Thank you for your reply.
I am able to download the csv file, but my problem is: I don't want the column headings to show.
Is it possible to download only the data, not the column headings?

Download Data is not working in Dashboard Report??

I tried to Download Data in Report and it gives me error message.Does any one faced this issue before.I tried this forum but coudn't get the enough information.Your help is appreciated.

hi,
sorry for the previus post....sleepingg...
try to think...
1.this happenig with all the reports???
try to download a simple one,without charts...
2.have you tried to log in as other user,
which is the result??
3.check in the analytics,the security...
Does it have the user log on,
available priviledges???
end,get firebug,and check the appropriate css
http://obiee101.blogspot.com/2009/07/obiee-dashboard-default-controls.html
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

How to download data into two different columns 2003 excel format in ole

Hi ALL
when we download data into excel using ole with delimiter it works fine in 2007 but when we check this with 2003 format
both fields come in only one column .Can any one suggest
CONCATENATE WA_ALL-PERNR LV_ICNUM INTO WA_PERNR SEPARATED BY W_DELI   IN CHARACTER MODE.

If you're already using OLE, you can fill in value for each cell separately instead of using a delimiter. Something like this fragment:
FORM fill_cell USING p_row p_col p_value.
CALL METHOD OF obj_excel 'CELLS' = obj_cell
    EXPORTING
    #1 = p_row
    #2 = p_col.
SET PROPERTY OF obj_cell 'VALUE' = p_value.
ENDFORM.                    "fill_cell

How to download data from a an external hard drive ?j

How to download data from an external hd ?

You need to copy the data onto your computer and transfer it via that (either via iTunes, or if the app that you want to transfer the data to supports, via wifi). Like the previous reply said, you can't do it directly without a computer being involved.

Error while downloading data from internal table into XML file

hi all,
i developed a program to download data from into internal table to xml file like this.
tables: mara.
parameters: p_matnr like mara-matnr.
data: begin of itab_mara occurs 0,
            matnr like mara-matnr,
            ernam like mara-ernam,
            aenam like mara-aenam,
            vpsta like mara-vpsta,
      end of itab_mara.
data: lv_field_seperator type c,     " value 'X',
      lv_xml_doc_name(30) type c,    " string value my xml file,
      lv_result type i.
      lv_field_seperator = 'x'.
      lv_xml_doc_name = 'my xml file'.
types: begin of truxs_xml_line,
          data(256) type x,
      end of truxs_xml_line.
types:truxs_xml_table type table of truxs_xml_line.
data:lv_tab_converted_data type truxs_xml_line,
     lt_tab_converted_data type truxs_xml_table.
data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
       rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
   I_FIELD_SEPERATOR          = lv_field_seperator
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
   I_XML_DOC_NAME             = lv_xml_doc_name
IMPORTING
   PE_BIN_FILESIZE            = lv_result
TABLES
    I_TAB_SAP_DATA             = itab_mara
CHANGING
   I_TAB_CONVERTED_DATA       = lt_tab_converted_data
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
open dataset lv_xml_file for output in binary mode.
loop at lt_tab_converted_data into lv_tab_converted_data.
transfer lv_tab_converted_data to lv_xml_file.
endloop.
close dataset lv_xml_file.
this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
will anyone show me the possible solution to rectify this error
thanks and regards,
anil.

Hi,
Here is a small sample program to convert data in an internal table into XML format and display it.
DATA: itab TYPE TABLE OF spfli,
      l_xml TYPE REF TO cl_xml_document.
* Read data into a ITAB
SELECT * FROM spfli INTO TABLE itab.
* Create the XML Object
CREATE OBJECT l_xml.
* Convert data in ITAB to XML
CALL METHOD l_xml->create_with_data( name = 'Test1'
                                     dataobject = t_goal[] ).
* Display XML Document
CALL METHOD l_xml->display.
Here are some other sample SAP programs to handle XML in ABAP:
BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
Hope this helps,
Sumant.

Error in background job of downloading data to PC

Hi Gurus,
   I hv created a report for downloading data to PC using
GUI_DOWNLOAD FM when scheduling job in background
job is getting canceled...................
give me some solution....

thnaks friend.i hv used DATASET as u said...............
But I M getting dump
FILE IS NOT OPEN
this is my code
TYPES:BEGIN OF T_MARD,
        MATNR LIKE MARD-MATNR,
        WERKS LIKE MARD-WERKS,
        LGORT LIKE MARD-LGORT,
        LABST LIKE MARD-LABST,
        MAKTX LIKE MAKT-MAKTX,
     END OF T_MARD.
***********WORK AREAS**********
DATA: WA_MARD TYPE T_MARD,
      WA_MARD1 TYPE T_MARD.
DATA:BEGIN OF IT_MARD1 OCCURS 0,
        MATNR(18),
        WERKS(4),
        LGORT(4),
        LABST(13),
        MAKTX(40),
     END OF IT_MARD1.
TYPES : BEGIN OF TY_BAT,
          LINE(100) TYPE C,
        END OF TY_BAT.
*********INTERNAL TABLES*******
DATA:IT_MARD TYPE STANDARD TABLE OF T_MARD INITIAL SIZE 0 WITH HEADER LINE .
types: BEGIN OF ITAB1,
            FIELD(100),
      END   OF ITAB1.
DATA : IT_BAT TYPE TABLE OF TY_BAT,
       WA_BAT TYPE TY_BAT,
       wa_itab1 type itab1.
data : it_tab type table of ALSMEX_TABLINE with header line.
*DATA: FILENAME1 TYPE STRING valu.
*DATA: FILENAME1(500).
DATA: FILENAME1 TYPE RLGRAP-FILENAME .
LOOP AT IT_MARD1.
      CONCATENATE IT_MARD1-MATNR IT_MARD1-LABST IT_MARD1-MAKTX
                  INTO wa_ITAB1    SEPARATED BY ' '.
      APPEND wa_itab1 to IT_tab.
      CLEAR wa_ITAB1.
    CLEAR WA_MARD.
ENDLOOP.
CONCATENATE 'D:\STOCKINH\' SY-DATUM '.TXT' INTO FILENAME1.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_tab into wa_itab1.
TRANSFER wa_itab1 TO filename1.
CLEAR wa_itab1.
ENDLOOP.
close dataset filename1.
MESSAGE S001(38) WITH 'Files Generated'.
WA_BAT = 'ftp -s:d:\ftp\ftp_upload.txt'.
APPEND WA_BAT TO IT_BAT.
CLEAR FILENAME1.
   FILENAME1 = 'D:\STOCKINH\ftp_upload.BAT'.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_bat INTO wa_bat.
TRANSFER wa_bat TO filename1.
CLEAR wa_bat.
ENDLOOP.
close dataset filename1.
CLEAR: IT_BAT.
REFRESH IT_BAT.
WA_BAT-LINE = 'open 10.100.103.199'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'epossync'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'sync@1234'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'lcd D:\STOCKINH\20080201.TXT'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'cd /home/epossync/AMIT'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'binary'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'hash'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'put D:\STOCKINH\20080201.txt'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = ' '.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'bye'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
CLEAR FILENAME1.
FILENAME1 = 'D:\STOCKINH\ftp_upload.txt'.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_bat INTO wa_bat.
TRANSFER wa_bat TO filename1.
CLEAR wa_bat.
ENDLOOP.
close dataset filename1.

Error while downloading data into excel file.

Hi,
    I have a requirement to download data available in xstring to excel file.
I have a RFC which has export parameter 'file_data' of type xstring. When i call RFC
from web dynpro abap application it gives data out pout in xstring format.
I am opening excel file using that xstring data as below
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'file.xls'
i_content = ls_data_source-data_source   ***[xstring data from RFC]
i_mime_type = 'x-excel/application'
i_in_new_window = abap_true ).
But excel file not coming in correct format. its giving an error while download
excel file
Error is
      " the file you are trying to open , 'file[1].xls', is in a different format than
specified by the file extension. Verify that the file is not corrupted and is from
a trusted source before opening the file. Do you want to open the file now? "
If i click on 'YES' button file opening but not in proper excel format. Data is coming
in tab delimiter format in excel file.
Please suggest any solution for this problem.
Thanks,
Venkat.

Hi Thomas,
Following is the logic implemented in RFC which is giving XSTRING as export parameter
STEP1      create a dynamic internal table
           Create field catalog for the table   using LVC_FIELDCATALOG_MERGE
               CALL METHOD cl_alv_table_create=>create_dynamic_table
                    EXPORTING
                       it_fieldcatalog = it_fieldcat
                     IMPORTING
                       ep_table        = dyn_table.
              CREATE EXCEL SHEET BY SENDING FIELD CATALOG AND DATA TAB
STEP2 # Convert text table to xstring.
        CALL FUNCTION 'SCMS_TEXT_TO_XSTRING'
          IMPORTING
            buffer   = l_content
          TABLES
            text_tab = lt_data_tab
          EXCEPTIONS
            failed   = 1
            OTHERS   = 2.
STEP3 *# Psss Data to Netweaver
          PERFORM pass_data_to_nw USING is_import
                                  CHANGING es_attachment_metadata.

Download Data Monitoring

Similar Messages

Maybe you are looking for