Download data of f-53 & f-58
Dear all,
Can you let me know,how can we down load data after executing F-53 & F-58.
In the download fiile ,we are looking for all the details like Vendor name,code,bank code,amount,etc
do suggest
Dear,
After you execute F-53 or F-58, items are cleared so use table BSAK to get paid documents for vendor and also use table PAYR to get payment details like check n all.
Download both the tables and bring both sheets in one workbook and use the formula Vlookup based on document number, you will have the report you want.
Regards,
Chintan Joshi
Similar Messages
-
Hi all,
I am downloading data to excel by using OLE2 type pool in an ABAP program.
My requirement is to make some of the columns of the excel sheet bold.
is it possible? if so please guide me.
LOOP AT IT_FINAL1 INTO WA_FINAL1.
R_IND = 1 + R_IND.
INDEX = 1 + SY-TABIX .
CLEAR IND.
DO.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE WA_FINAL1 TO <I_OUTPUT>.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
IND = SY-INDEX.
CALL METHOD OF SHEET 'Cells' = CELLS EXPORTING #1 = INDEX
#2 = IND. "1
SET PROPERTY OF CELLS 'Value' = <I_OUTPUT>.
ENDDO.
CALL METHOD OF APPLICATION 'Cells' = CELL1
EXPORTING #1 = 1
#2 = 7.
CALL METHOD OF APPLICATION 'Cells' = CELL2
EXPORTING
#1 = INDEX "down
#2 = 7. "across
ENDLOOP.
I have used the above code.
here 7th column, 10th column, 13th column has to be made bold and so on.
regards,
samarendra.
Edited by: samarendra penugonda on May 26, 2009 12:57 PMHello,
Check this standard program it is printing some values in bold.
RSDEMO01
Example
SET PROPERTY OF H_F 'Bold' = BOLD . -
Download data from ALV to excel issue
Hi All,
Could you please tell me if there has any restriction on ALV grid data download to excel? I've a report contains 68 columns and about 500 rows, I want to download the data using the standard menu list->export->save to local file. but after I download them, I found the first 65 columns display in one line and the rest columns display in next line, just like ALV do not allow too many characters in one row and have to switch to new line. I can hide some columns but it's very strange that even after i hide 3 columns to fit the 500 rows download, then if the rows increase, the same problem occurs.
I searched the forum and in the thread Re: Export ALV in EXCEL Issue Mr. Suvajit provided a solution by using menu List->export->spreadsheet, it looks very good. But I still want to know how this happen and is there a standard way to download data with more than 65 columns to local file with extension .xls so that user can open it directly?
PS: I'm using FM REUSE_ALV_GRID_DISPLAY and the SAP version is SAP ECC6 with kernal package SAPKB70103.
Thank you very much.
Best Regards,
Jeff
Edited by: Jeff_liu_2010 on Mar 10, 2011 7:21 AMHi Jeff,
Please check if following analysis is helpful to you.
Analysis/Solution:
When we export ALV data to excel worksheet, as sap notes say the maximum lenght allowed is 1023 charaters and the max no of columns supported is 90.
(I never faced any issue related to no of columns as it worked fine for columns >90 too)
Issue occured when row size of exported data gets more than 1023 character.
Therefore the row data must not exceed 1023 character, otherwise column splits and moves to next row.
One additional aspect generally missed is that:
When data in any particular column changes it's length, alv header also changes its lengh (short text, medium text, long text; depending on the length of of the longest cell in the column)
therefore even if you have total length of row less than 1023 character, there might be cases when your ALV header size exceeds this length.
Reducing the header size (by forcing to use short text or specifying own header names) should resolve the issue.
Regards,
Parveen -
Problem in downloading data from application server
Hi,
I tried the following code for downloading data to PC in background:
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
LOOP AT itab INTO istab.
TRANSFER istab TO p_file.
ENDLOOP.
ENDIF.
Here, the contents are not getting transferred to the p_file. I give the path of the file while executing the program.
First of all, the file is not getting created in PC. And the statement 'OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT'. is working but unable to read after that using READ DATASET statement.HI,
You can use this code .............
OPEN DATASET gv_dataset for input in text mode encoding default.
IF sy-subrc = 0.
DO.
clear gv_rec.
READ DATASET gv_dataset INTO gv_rec.
if sy-subrc <> 0.
append gv_rec to gt_raw.
exit.
endif.
append gv_rec to gt_raw.
ENDDO.
CLOSE DATASET gv_dataset.
ELSE.
gv_retcode = 1.
ENDIF.
Regards,
jayan -
How to download data into one cell of excel in different lines
Hi All,
My Report downloads data from R/3 to excel. Now one particular field contains multiple lines, which i needs to download into different lines into that particular cell(of excel). how can i do this.
I found one method for this and that is cl_abap_char_utilities=>newline.But this is in abap version 6.0.
But i am working in version 4.6c. do we have any method or anything that meets my requirement in 4.6c.
Please let me know.
Thanx in Advance
Subhani.why do you split them to the internal table ,then download it?
Is you special field long text?
If is ,you can use FM READ_TEXT to put it into an internal table ,then download it. -
Download data from interactive report
Hi all. I'm on apex 3.1.1.00.09.
I have this problem: when I download data from interactive report I can download only in CSV and PDF. If I try to download into pdf it creates a file of only 1 KB.
I would know if I must configure my apex in order to download correctly in pdf and if I must configure it in order to download in doc and xls format.
Thanks all for collaboration,
FabrizioThank you for your reply.
I am able to download the csv file, but my problem is: I don't want the column headings to show.
Is it possible to download only the data, not the column headings? -
Download Data is not working in Dashboard Report??
I tried to Download Data in Report and it gives me error message.Does any one faced this issue before.I tried this forum but coudn't get the enough information.Your help is appreciated.
hi,
sorry for the previus post....sleepingg...
try to think...
1.this happenig with all the reports???
try to download a simple one,without charts...
2.have you tried to log in as other user,
which is the result??
3.check in the analytics,the security...
Does it have the user log on,
available priviledges???
end,get firebug,and check the appropriate css
http://obiee101.blogspot.com/2009/07/obiee-dashboard-default-controls.html
hope i helped....
http://greekoraclebi.blogspot.com/
/////////////////////////////////////// -
How to download data into two different columns 2003 excel format in ole
Hi ALL
when we download data into excel using ole with delimiter it works fine in 2007 but when we check this with 2003 format
both fields come in only one column .Can any one suggest
CONCATENATE WA_ALL-PERNR LV_ICNUM INTO WA_PERNR SEPARATED BY W_DELI IN CHARACTER MODE.If you're already using OLE, you can fill in value for each cell separately instead of using a delimiter. Something like this fragment:
FORM fill_cell USING p_row p_col p_value.
CALL METHOD OF obj_excel 'CELLS' = obj_cell
EXPORTING
#1 = p_row
#2 = p_col.
SET PROPERTY OF obj_cell 'VALUE' = p_value.
ENDFORM. "fill_cell -
How to download data from a an external hard drive ?j
How to download data from an external hd ?
You need to copy the data onto your computer and transfer it via that (either via iTunes, or if the app that you want to transfer the data to supports, via wifi). Like the previous reply said, you can't do it directly without a computer being involved.
-
Error while downloading data from internal table into XML file
hi all,
i developed a program to download data from into internal table to xml file like this.
tables: mara.
parameters: p_matnr like mara-matnr.
data: begin of itab_mara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
aenam like mara-aenam,
vpsta like mara-vpsta,
end of itab_mara.
data: lv_field_seperator type c, " value 'X',
lv_xml_doc_name(30) type c, " string value my xml file,
lv_result type i.
lv_field_seperator = 'x'.
lv_xml_doc_name = 'my xml file'.
types: begin of truxs_xml_line,
data(256) type x,
end of truxs_xml_line.
types:truxs_xml_table type table of truxs_xml_line.
data:lv_tab_converted_data type truxs_xml_line,
lt_tab_converted_data type truxs_xml_table.
data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR = lv_field_seperator
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
I_XML_DOC_NAME = lv_xml_doc_name
IMPORTING
PE_BIN_FILESIZE = lv_result
TABLES
I_TAB_SAP_DATA = itab_mara
CHANGING
I_TAB_CONVERTED_DATA = lt_tab_converted_data
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
open dataset lv_xml_file for output in binary mode.
loop at lt_tab_converted_data into lv_tab_converted_data.
transfer lv_tab_converted_data to lv_xml_file.
endloop.
close dataset lv_xml_file.
this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
will anyone show me the possible solution to rectify this error
thanks and regards,
anil.Hi,
Here is a small sample program to convert data in an internal table into XML format and display it.
DATA: itab TYPE TABLE OF spfli,
l_xml TYPE REF TO cl_xml_document.
* Read data into a ITAB
SELECT * FROM spfli INTO TABLE itab.
* Create the XML Object
CREATE OBJECT l_xml.
* Convert data in ITAB to XML
CALL METHOD l_xml->create_with_data( name = 'Test1'
dataobject = t_goal[] ).
* Display XML Document
CALL METHOD l_xml->display.
Here are some other sample SAP programs to handle XML in ABAP:
BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
Hope this helps,
Sumant. -
Error in background job of downloading data to PC
Hi Gurus,
I hv created a report for downloading data to PC using
GUI_DOWNLOAD FM when scheduling job in background
job is getting canceled...................
give me some solution....thnaks friend.i hv used DATASET as u said...............
But I M getting dump
FILE IS NOT OPEN
this is my code
TYPES:BEGIN OF T_MARD,
MATNR LIKE MARD-MATNR,
WERKS LIKE MARD-WERKS,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF T_MARD.
***********WORK AREAS**********
DATA: WA_MARD TYPE T_MARD,
WA_MARD1 TYPE T_MARD.
DATA:BEGIN OF IT_MARD1 OCCURS 0,
MATNR(18),
WERKS(4),
LGORT(4),
LABST(13),
MAKTX(40),
END OF IT_MARD1.
TYPES : BEGIN OF TY_BAT,
LINE(100) TYPE C,
END OF TY_BAT.
*********INTERNAL TABLES*******
DATA:IT_MARD TYPE STANDARD TABLE OF T_MARD INITIAL SIZE 0 WITH HEADER LINE .
types: BEGIN OF ITAB1,
FIELD(100),
END OF ITAB1.
DATA : IT_BAT TYPE TABLE OF TY_BAT,
WA_BAT TYPE TY_BAT,
wa_itab1 type itab1.
data : it_tab type table of ALSMEX_TABLINE with header line.
*DATA: FILENAME1 TYPE STRING valu.
*DATA: FILENAME1(500).
DATA: FILENAME1 TYPE RLGRAP-FILENAME .
LOOP AT IT_MARD1.
CONCATENATE IT_MARD1-MATNR IT_MARD1-LABST IT_MARD1-MAKTX
INTO wa_ITAB1 SEPARATED BY ' '.
APPEND wa_itab1 to IT_tab.
CLEAR wa_ITAB1.
CLEAR WA_MARD.
ENDLOOP.
CONCATENATE 'D:\STOCKINH\' SY-DATUM '.TXT' INTO FILENAME1.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_tab into wa_itab1.
TRANSFER wa_itab1 TO filename1.
CLEAR wa_itab1.
ENDLOOP.
close dataset filename1.
MESSAGE S001(38) WITH 'Files Generated'.
WA_BAT = 'ftp -s:d:\ftp\ftp_upload.txt'.
APPEND WA_BAT TO IT_BAT.
CLEAR FILENAME1.
FILENAME1 = 'D:\STOCKINH\ftp_upload.BAT'.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_bat INTO wa_bat.
TRANSFER wa_bat TO filename1.
CLEAR wa_bat.
ENDLOOP.
close dataset filename1.
CLEAR: IT_BAT.
REFRESH IT_BAT.
WA_BAT-LINE = 'open 10.100.103.199'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'epossync'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'sync@1234'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'lcd D:\STOCKINH\20080201.TXT'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'cd /home/epossync/AMIT'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'binary'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'hash'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'put D:\STOCKINH\20080201.txt'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = ' '.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'bye'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
CLEAR FILENAME1.
FILENAME1 = 'D:\STOCKINH\ftp_upload.txt'.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_bat INTO wa_bat.
TRANSFER wa_bat TO filename1.
CLEAR wa_bat.
ENDLOOP.
close dataset filename1. -
Error while downloading data into excel file.
Hi,
I have a requirement to download data available in xstring to excel file.
I have a RFC which has export parameter 'file_data' of type xstring. When i call RFC
from web dynpro abap application it gives data out pout in xstring format.
I am opening excel file using that xstring data as below
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'file.xls'
i_content = ls_data_source-data_source ***[xstring data from RFC]
i_mime_type = 'x-excel/application'
i_in_new_window = abap_true ).
But excel file not coming in correct format. its giving an error while download
excel file
Error is
" the file you are trying to open , 'file[1].xls', is in a different format than
specified by the file extension. Verify that the file is not corrupted and is from
a trusted source before opening the file. Do you want to open the file now? "
If i click on 'YES' button file opening but not in proper excel format. Data is coming
in tab delimiter format in excel file.
Please suggest any solution for this problem.
Thanks,
Venkat.Hi Thomas,
Following is the logic implemented in RFC which is giving XSTRING as export parameter
STEP1 create a dynamic internal table
Create field catalog for the table using LVC_FIELDCATALOG_MERGE
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = dyn_table.
CREATE EXCEL SHEET BY SENDING FIELD CATALOG AND DATA TAB
STEP2 # Convert text table to xstring.
CALL FUNCTION 'SCMS_TEXT_TO_XSTRING'
IMPORTING
buffer = l_content
TABLES
text_tab = lt_data_tab
EXCEPTIONS
failed = 1
OTHERS = 2.
STEP3 *# Psss Data to Netweaver
PERFORM pass_data_to_nw USING is_import
CHANGING es_attachment_metadata. -
Hi ABAP Exterts,
Any one help on this , there is a requirement to download the data into XLSX file only.
I am able to to download the data into XLS file using the FM: GUI_DOWNLOAD in SAP ECC 6.0and also opening the file . But when i download the data into XLSX file . I am able to download the data into GUI_DOWNLOAD. But while opening the file i am getting the below mentioned error.
'Excel cannot open the file 'filename.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'
Ok buttom is coming not able to open the file.
When i use the FM: SAP_CONVERT_TO_XLS_FORMAT to download the XLS it self it is going abap DUMP that file type error.
Any one help any Function Module or how to download data through abap programing into XLSX file.
Thanks.
Murali.
Message was edited by: Matthew Billingham - adjusted wording...If you want to download your ALV to an .XLXS format file, with all the formatting intact, please try the following code. I have tried to create a custom Function module Z_EXCEL_DOWNLOAD_TEST wherein I pass all the callback variables, the final ALV internal table and all the ALV details like field catalog, sort, layout, event list and so on, along with the concatenated file path and file name in I_FILE. I have used a custom class ZCL_SALVEXPORT_XML which is a copy of the standard class CL_SALV_EXPORT_XML_DIALOG, with few modifications in Method: EXECUTE and Method: DOWNLOAD. The methods where I have modified the code are also shown at the end.
****************Global declarations***********************
TYPE-POOLS: slis,
kkblo.
TYPES: t_fccls(1) TYPE c OCCURS 0.
TYPES: BEGIN OF ty_nosum,
fieldname TYPE kkblo_fieldname, "Field name
tabname TYPE kkblo_tabname, "Table name
fieldname_dep TYPE kkblo_fieldname, "Field name
tabname_dep TYPE kkblo_tabname, "Table name
index TYPE sy-index, "Index
END OF ty_nosum.
TYPES: t_nosum TYPE TABLE OF ty_nosum INITIAL SIZE 0 WITH NON-UNIQUE DEFAULT KEY.
TYPES: BEGIN OF ty_dep_field,
s_dep_fieldcat TYPE kkblo_fieldcat, "Field cat
t_ref_fieldcat TYPE kkblo_t_fieldcat, "Field cat
END OF ty_dep_field.
TYPES: BEGIN OF ty_ref_field,
s_ref_fieldcat TYPE kkblo_fieldcat, "Field cat
s_dep_fieldcat TYPE kkblo_fieldcat, "Field cat
END OF ty_ref_field.
TYPES: t_dep_field TYPE ty_dep_field OCCURS 0. "
TYPES: t_ref_field TYPE ty_ref_field OCCURS 0.
TYPES: BEGIN OF ty_memory,
object(20) TYPE c, "Object
memcount(4) TYPE c, "count
END OF ty_memory.
*ALV Customer Wrapper
TYPES: BEGIN OF ty_type_header_info,
tabname TYPE kkblo_tabname, "Table name
fieldname TYPE kkblo_fieldname, "Field name
sequence TYPE i, "Sequence
field TYPE char80, "Field
pagno TYPE sypagno, "Page num
linno TYPE sy-linno, "Current Line in List
colno TYPE sy-colno, "Current List Column
END OF ty_type_header_info,
t_type_header_info TYPE SORTED TABLE OF ty_type_header_info
WITH UNIQUE KEY tabname fieldname.
TYPES: BEGIN OF ty_type_row_info,
tabname TYPE kkblo_tabname, "Table name
tabindex TYPE syindex, "Index
field TYPE char80, "Field name
pagno TYPE sypagno, "Page num
linno TYPE sy-linno, "Current Line in List
colno TYPE sy-colno, "Current List Column
END OF ty_type_row_info,
t_type_row_info TYPE SORTED TABLE OF ty_type_row_info
WITH UNIQUE KEY tabname tabindex.
TYPES: BEGIN OF ty_type_sel_header,
tabname TYPE kkblo_tabname, "table name
fieldname TYPE kkblo_fieldname, "field name
END OF ty_type_sel_header,
t_type_sel_header TYPE SORTED TABLE OF ty_type_sel_header
WITH UNIQUE KEY tabname fieldname.
TYPES: BEGIN OF ty_type_sel_row,
tabname TYPE kkblo_tabname,
tabindex TYPE syindex,
END OF ty_type_sel_row,
t_type_sel_row TYPE SORTED TABLE OF ty_type_sel_row
WITH UNIQUE KEY tabname tabindex.
TYPES: BEGIN OF ty_type_sel_cell,
tabname TYPE kkblo_tabname,
tabindex TYPE syindex,
fieldname TYPE kkblo_fieldname,
END OF ty_type_sel_cell.
TYPES: BEGIN OF ty_type_selections,
t_row_info TYPE t_type_row_info,
t_header_info TYPE t_type_header_info,
t_selected_headers TYPE t_type_sel_header,
t_selected_rows TYPE t_type_sel_row,
s_current_cell TYPE ty_type_sel_cell,
set_headers TYPE sap_bool,
set_rows TYPE sap_bool,
set_current_cell TYPE sap_bool,
END OF ty_type_selections.
TYPES: BEGIN OF ty_stack3,
r_grid TYPE REF TO cl_gui_alv_grid, "Y6DK050176
r_salv_adapter TYPE REF TO if_salv_adapter,
s_selections TYPE ty_type_selections,
r_print_state TYPE REF TO if_alv_print_parameter_proxy, "Y6DK075821
suppress_empty_data TYPE abap_bool,
END OF ty_stack3.
TYPES: t_stack3 TYPE ty_stack3 OCCURS 0.
TYPES: BEGIN OF ty_stack,
i_callback_program TYPE sy-repid,
i_callback_user_command TYPE kkblo_formname,
i_callback_top_of_page TYPE kkblo_formname,
i_callback_top_of_list TYPE kkblo_formname,
i_callback_end_of_page TYPE kkblo_formname,
i_callback_end_of_list TYPE kkblo_formname,
i_callback_pf_status_set TYPE kkblo_formname,
i_callback_fieldcat_save TYPE kkblo_formname,
i_callback_layout_save TYPE kkblo_formname,
i_tabname TYPE kkblo_tabname,
i_tabname_slave TYPE kkblo_tabname,
is_keyinfo TYPE kkblo_keyinfo,
is_layout TYPE kkblo_layout,
it_fieldcat TYPE kkblo_t_fieldcat,
i_fctype(1) TYPE c,
it_excluding TYPE kkblo_t_extab,
it_special_groups TYPE kkblo_t_sp_group,
it_sort TYPE kkblo_t_sortinfo,
it_except_qinfo TYPE kkblo_t_qinfo,
is_sel_hide TYPE kkblo_sel_hide,
t_columns TYPE kkblo_t_columns,
t_filter TYPE kkblo_t_filter,
s_lprint TYPE kkblo_lprint,
print_line_break TYPE char1,
t_isetab TYPE kkblo_seldis,
t_fccls TYPE t_fccls,
t_sfinfo TYPE kkblo_t_sfinfo,
t_ref_field TYPE t_ref_field,
t_dep_field TYPE t_dep_field,
flg_default_status(1) TYPE c,
flg_selections TYPE char1,
flg_allow_no_selection TYPE char1,
flg_input TYPE char1,
flg_called TYPE char1,
flg_popup TYPE char1,
flg_endlist TYPE char1,
listtype TYPE char1,
actcols TYPE i,
is_list TYPE char1,
END OF ty_stack.
TYPES: t_stack TYPE ty_stack OCCURS 0.
TYPES: BEGIN OF ty_stack2,
button_col1(20) TYPE c,
button_col2(20) TYPE c,
button_col3(20) TYPE c,
button_col4(20) TYPE c,
button_col5(20) TYPE c,
s_header TYPE kkblo_header,
t_sfinfo_slave TYPE kkblo_t_sfinfo,
t_suminfo TYPE kkblo_t_sfinfo,
t_sfsave TYPE kkblo_t_sfinfo,
t_nosum TYPE t_nosum,
window_title TYPE rsmpe-tittext, " Item_selection
flg_scroll_to_line(1) TYPE c, " Item_selection
flg_top_of_page(1) TYPE c,
flg_subtot(1) TYPE c,
flg_output_in_progress(1) TYPE c,
flg_grouplevels(1) TYPE c,
flg_groupedit(1) TYPE c,
flg_calculate_totals(1) TYPE c,
sumlevel TYPE sy-tabix,
memory_stack1 TYPE ty_memory,
memory_stack2 TYPE ty_memory,
memory_outtab TYPE ty_memory,
t_colmark TYPE kkblo_t_colmark,
t_rowmark TYPE kkblo_t_rowmark,
it_event_exit TYPE kkblo_t_event_exit,
t_groups TYPE kkblo_t_grouplevels,
t_filter_groups TYPE kkblo_t_grouplevels,
s_subtot_options TYPE kkblo_subtot_options,
flg_append_mode(1) TYPE c,
is_reprep_id TYPE kkblo_reprep_id,
i_callback_before_line_output TYPE kkblo_formname,
i_callback_after_line_output TYPE kkblo_formname,
i_callback_foreign_top_of_page TYPE kkblo_formname,
i_callback_foreign_end_of_page TYPE kkblo_formname,
i_callback_list_modify TYPE kkblo_formname,
i_callback_top_of_coverpage TYPE kkblo_formname,
i_callback_end_of_coverpage TYPE kkblo_formname,
i_callback_grouplevel_change TYPE kkblo_formname,
i_callback_item_data_expand TYPE kkblo_formname,
i_callback_header_transport TYPE kkblo_formname,
i_callback_reprep_sel_modify TYPE kkblo_formname,
i_callback_subtotal_text TYPE kkblo_formname,
END OF ty_stack2.
TYPES: t_stack2 TYPE TABLE OF ty_stack2 INITIAL SIZE 0.
** *--- iTables
DATA: it_stack TYPE t_stack WITH HEADER LINE.
DATA: it_stack2 TYPE t_stack2 WITH HEADER LINE.
***ALV Customer Wrapper
DATA: it_stack3 TYPE t_stack3 WITH HEADER LINE.
CONSTANTS: BEGIN OF c_con_listtype,
simple(1) TYPE c VALUE 'S',
hier_sequ(1) TYPE c VALUE 'H',
matrix(1) TYPE c VALUE 'M',
END OF c_con_listtype.
DATA: gv_callback_program1 TYPE sy-repid,
gv_callback_user_command1 TYPE kkblo_formname,
gv_callback_top_of_page1 TYPE kkblo_formname,
gv_callback_top_of_list1 TYPE kkblo_formname,
gv_callback_end_of_page1 TYPE kkblo_formname,
gv_callback_end_of_list1 TYPE kkblo_formname,
gv_callback_pf_status_set1 TYPE kkblo_formname,
gv_callback_layout_save1 TYPE kkblo_formname,
gv_callback_fieldcat_save1 TYPE kkblo_formname,
gv_callback_grouplevel_change1 TYPE kkblo_formname,
gv_callback_before_line_otput1 TYPE kkblo_formname,
gv_callback_after_line_otput1 TYPE kkblo_formname,
gv_callback_foreign_top_of_pg1 TYPE kkblo_formname,
gv_callback_foreign_end_of_pg1 TYPE kkblo_formname,
gv_callback_list_modify1 TYPE kkblo_formname,
gv_callback_top_of_coverpge1 TYPE kkblo_formname,
gv_callback_end_of_coverpge1 TYPE kkblo_formname,
gv_callback_item_data_expand1 TYPE kkblo_formname,
gv_callback_header_transport1 TYPE kkblo_formname,
gv_callback_reprep_sel_modify1 TYPE kkblo_formname,
gv_callback_subtotal_text1 TYPE kkblo_formname,
gv_layout1 TYPE kkblo_layout,
gv_fieldcat1 TYPE kkblo_t_fieldcat,
gv_fctype1 TYPE c,
gv_event_exit1 TYPE kkblo_t_event_exit,
gv_excluding1 TYPE kkblo_t_extab,
gv_special_groups1 TYPE kkblo_t_sp_group,
gv_sort1 TYPE kkblo_t_sortinfo,
gv_filter1 TYPE kkblo_t_filter,
gv_except_qinfo1 TYPE slis_t_qinfo_alv,
gv_sel_hide1 TYPE slis_sel_hide_alv,
gv_reprep_id1 TYPE slis_reprep_id,
gv_screen_start_column1 TYPE i,
gv_salv_adapter1 TYPE REF TO if_salv_adapter,
gv_suppress_empty_data1 TYPE sap_bool.
FUNCTION z_excel_download_test.
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(I_BYPASSING_BUFFER) TYPE CHAR01 OPTIONAL
*" REFERENCE(I_BUFFER_ACTIVE) OPTIONAL
*" REFERENCE(I_CALLBACK_PROGRAM) TYPE SY-REPID OPTIONAL
*" REFERENCE(I_CALLBACK_USER_COMMAND) OPTIONAL
*" REFERENCE(I_CALLBACK_TOP_OF_PAGE) OPTIONAL
*" REFERENCE(I_CALLBACK_TOP_OF_LIST) OPTIONAL
*" REFERENCE(I_CALLBACK_END_OF_PAGE) OPTIONAL
*" REFERENCE(I_CALLBACK_END_OF_LIST) OPTIONAL
*" REFERENCE(I_CALLBACK_PF_STATUS_SET) OPTIONAL
*" REFERENCE(I_CALLBACK_LAYOUT_SAVE) OPTIONAL
*" REFERENCE(I_CALLBACK_FIELDCAT_SAVE) OPTIONAL
*" REFERENCE(I_CALLBACK_GROUPLEVEL_CHANGE) OPTIONAL
*" REFERENCE(I_CALLBACK_BEFORE_LINE_OUTPUT) OPTIONAL
*" REFERENCE(I_CALLBACK_AFTER_LINE_OUTPUT) OPTIONAL
*" REFERENCE(I_CALLBACK_FOREIGN_TOP_OF_PAGE) OPTIONAL
*" REFERENCE(I_CALLBACK_FOREIGN_END_OF_PAGE) OPTIONAL
*" REFERENCE(I_CALLBACK_LIST_MODIFY) OPTIONAL
*" REFERENCE(I_CALLBACK_TOP_OF_COVERPAGE) OPTIONAL
*" REFERENCE(I_CALLBACK_ITEM_DATA_EXPAND) OPTIONAL
*" REFERENCE(I_CALLBACK_END_OF_COVERPAGE) OPTIONAL
*" REFERENCE(I_CALLBACK_HEADER_TRANSPORT) OPTIONAL
*" REFERENCE(I_CALLBACK_REPREP_SEL_MODIFY) OPTIONAL
*" REFERENCE(I_CALLBACK_SUBTOTAL_TEXT) OPTIONAL
*" REFERENCE(I_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*" REFERENCE(I_FCTYPE) DEFAULT 'R'
*" REFERENCE(IT_EXCEPT_QINFO) TYPE SLIS_T_QINFO_ALV OPTIONAL
*" REFERENCE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*" REFERENCE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
*" REFERENCE(I_SCREEN_START_COLUMN) DEFAULT 0
*" REFERENCE(I_OO_ALV) OPTIONAL
*" REFERENCE(IR_SALV_ADAPTER) TYPE REF TO IF_SALV_ADAPTER OPTIONAL
*" REFERENCE(I_SUPPRESS_EMPTY_DATA) TYPE SAP_BOOL DEFAULT
*" ABAP_FALSE
*" REFERENCE(I_FILE) TYPE STRING OPTIONAL
*" REFERENCE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*" REFERENCE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*" REFERENCE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*" REFERENCE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*" REFERENCE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*" REFERENCE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV OPTIONAL
*" REFERENCE(IS_KEYINFO) TYPE SLIS_KEYINFO_ALV OPTIONAL
*" REFERENCE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
*" REFERENCE(IS_LIST_SCROLL) TYPE SLIS_LIST_SCROLL OPTIONAL
*" REFERENCE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
*" REFERENCE(IS_LINEINFO) TYPE SLIS_LINEINFO OPTIONAL
*" REFERENCE(I_REPID) TYPE SYREPID OPTIONAL
*" TABLES
*" T_OUTTAB TYPE STANDARD TABLE OPTIONAL
*********** Local data declarations******************
DATA: gv_list TYPE char1.
DATA: gv_fcat_complete TYPE sap_bool.
DATA: gv_buffer_active TYPE char01,
wa_variant TYPE disvariant.
DATA: gv_controller TYPE REF TO cl_salv_export_c8r.
DATA: gv_xml TYPE xstring.
DATA: gv_s_xml_choice TYPE if_salv_bs_xml=>s_type_xml_choice.
DATA: gv_t_xml_choice TYPE if_salv_bs_xml=>t_type_xml_choice.
DATA: gv_param_lvc TYPE if_salv_export=>s_type_param_lvc.
DATA: gv_data TYPE REF TO data.
DATA: gv_result_data TYPE REF TO cl_salv_ex_result_data_table.
DATA: gv_flavour TYPE string.
DATA: gv_version TYPE string.
DATA: -
Error message: when downloading data from 2nd display tag table
I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:595)
As per the Exception i don't have any jsp tag before the display tag.
Please help me if any body has any solution for the above exception.
Thanks in advance.
Smruti..See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
How to download data from an internal table to a text
Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
wa_intab LIKE LINE OF intab,
no_of_rec TYPE i,
count TYPE i.
DATA: BEGIN OF f_intab,
str(255) TYPE c,
END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
w_intab LIKE LINE OF t_intab,
temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
others RADIOBUTTON GROUP rad1,
delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
MESSAGE i001.
EXIT.
ENDIF.
IF others = 'X'. " check to ensure delimiter.
IF delimit = ' '.
MESSAGE i002.
EXIT.
ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'. " default delimiter tab is used
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = file
filetype = 'DAT'
mode = 'A'
TABLES
data_tab = intab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
no_authority = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE. " If user defind delimiter is to be used
Counts the number of fields *
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
IF sy-subrc <> 0.
EXIT.
ELSE.
count = count + 1.
ENDIF.
ENDDO.
LOOP AT intab INTO wa_intab.
DO count TIMES. " Adding the delimiter in required places
ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
CONCATENATE temp delimit <f> INTO temp.
ENDDO.
SHIFT temp.
APPEND temp TO t_intab.
CLEAR temp.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = file
filetype = 'ASC'
mode = 'A'
TABLES
data_tab = t_intab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
no_authority = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~ -
Download data entered via web to a text file.
Hello,
I'm developing a very simple BSP aplication in which the user enters via web some data in some fields. This data is store in an internal table. This table is an attribute in the application class. In this class there is a method to save the data to a file in presentation server. I've tried using WS_DOWNLOAD and GUI_DOWNLOAD but these function modules don't work. I would like to know if there some function modules or methods to download data to a file and that can be used in a BSP aplication.
Thank you very much,
Carlos
Details:
1-Layout
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
Carga ficheros
generar_fichero
exporting nombre_fichero = fichero.
3- Method generar_fichero
method GENERAR_FICHERO .
***Opción 1: emplear una instancia de una clase y llamar a su método
data: file type ref to CL_GUI_FRONTEND_SERVICES.
create object file.
data l_filelength type i.
call method file->gui_download
exporting filename = nombre_fichero
importing filelength = l_filelength
changing data_tab = m_tabladatos
exceptions
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
*if sy-subrc ne 0.
raise error_fichero.
*else.
**borrar cookie
*endif.
***Opción 2: llamada directa a la función ws_download_wan "FALLA:
***********************************************"no deja rastro del fallo
data l_filename(128).
write nombre_fichero to l_filename.
*CALL FUNCTION 'WS_DOWNLOAD_WAN'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = l_filename
FILETYPE = 'ASC'
MODE = 'A'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = m_tabladatos
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8
*IF SY-SUBRC <> 0.
raise error_fichero.
*else.Hallo Carlos,
Welcome to the forum. As with all things new in life, one does not know where to start immediately. I would like to recommend the <a href="/people/brian.mckellar/blog/2004/06/11/bsp-trouble-shooting-getting-help">Getting Help</a> guide as first interesting article to read.
Specifically you are interested in the section for searching this forum. Use keywords such as download or GUI_DOWNLOAD. Also consider to look at keyword Excel. Although not exactly on topic, the Excel discussions does address this partly. All of this has been discussed many time before.
Finally, consider to read <a href="/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents">BSP Programming: Handling Of Non-HTML Documents</a>. This will really show you some different techniques to download files onto the computer.
brian
Maybe you are looking for
-
Installing OMS 10.2.0.5 on server with Oracle 11.1.0.7
IBM w/AIX 6.1 I am wondering if there would be any expected issues to download and install the latest version of OMS (Oracle Management Server for Grid Control), 10.2.0.5 onto a server that already has Oracle 11.1.0.7 running on it. I intend to use t
-
How do i check what's taking up all of my space on the macbook air?
Hi, I've only just got the macbook air 2012 with 64gb of space and now it seems that i have run out of space..Apparently i'm using 54gb and i just can't see how thats possible, because i've only download atleast 2 apps and got iphoto and imovie. Also
-
Acrobat X Pro (trial) giving different output then Acrobat X Standard
I downloaded and used Acrobat-X Pro (trial version) on a 200 page MS WORD file that was full of photos and it created a 133MB PDF (I ran in Press mode). The trial ran out, so I deinstalled and then installed a licensed Acrobat-X Standard version. I c
-
Does iPad Unlimited plan have to be set to auto-renew?
I have seen different people claim to have different answers to this. If I let my unlimited plan lapse, will I be able to sign back up for it down the road? I have seen some people say no, and others have said it is programmed on the SIM and will sti
-
Unable to check'relevant for delivery' for 'Standard' Item type in Item cat
Hi I am facing a strange situation in SAP when I tried to create a new Item category with Item type as 'Standard' & 'Relevant for Delivery',I am getting a message that 'Relevant for Delivery'is possible only with Value Item & Text Item...We have an o