Download EHP4 for ERP 6.0 using Optimizer

We're trying to download EHP4 for ERP 6.0 uisng Solution Manager
optimizer. We've reviewed EHP4 master guide but very confused as how to
download through Solution Manager. For instance, our business team
asked us to install SRM server and FSCM of EHP4 for ERP 6.0. When we go
through optimizer and find FSCM uses is grayed out and SRM server is
not even there.
Questions:
1. How to enable grayed out components in optimizer so we can download?
2. Are all those components such as SRM server installed on ECC server,
or should be on other servers such as SRM ?
Thanks very much!

Felipe Pitta wrote:>
> We're trying to download EHP4 for ERP 6.0 uisng Solution Manager
EHP4 is still in RampUp.
> 1. How to enable grayed out components in optimizer so we can download?
Are they available for the user (S-User) in the service marketplace? You can check by trying to download the stack from there instead of SolMan.
> 2. Are all those components such as SRM server installed on ECC server,
> or should be on other servers such as SRM ?
This depends on your local setup - both are possible.
Markus

Similar Messages

EHP4 for ERP and EHP1 for NW

Hello,
I have a couple of questions regarding EHP4.
We are planning to install EHP4 for ERP 6.0 in our ECC server. Will this also install EHP1 for Netweaver on them?
Also, we have a portal running on a different server using the ECC server as the backend. Will applying EHP1 for Netweaver (as part of EHP4 for ERP6.0) on the ECC server have any implication on the portal? Or is it mandatory that we upgrade our portal also to EHP1 for Netweaver?
Any help in this regard will be highly appreciated.
Thanks,
Ajay

Hi Ajay,
As part of the EHP4 installation in the ECC Server the basis will get automatically updated to q NW EHP1 level (ABAP).
The EHP1 is not mandatory for the Portal from an ERP EHP4 perspective - you can choose weather you update (EHP1) or not - therefore there are 2 different production versions offered in Maintenance Optimizer.
More information can be found in the guides via: http://service.sap.com/ehp-inst
Best regards,
Christian.

I am unable to download updates for my iphone 4 using my pc. i have turned off firewall and spam however halfway through the download it says that the network has been disconeccted and to adjust my setting. very frustrating!!!

i am unable to download updates for my iphone 4 using my pc. i have turned off firewall and spam however the downloadkeeps stopping about halfway through saying i have been disconnected from the network and to check my settings. very frustrating! help!

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Hi i dont have a wifi broadband n i just bought the new ipod touch can anyone tell me how 2 download apps for my ipod without using wifi

hi i dont have a wifi broadband n i just bought the new ipod touch can anyone tell me how 2 download apps for my ipod without using wifi

Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

E-Commerce 5.0 for ERP and re-using a Quote

We have an E-Commerce 5.0 for ERP environment that has been up and running for three years now. Everything is working great and we've made many custom enhancements through the years, but there is one that business is asking for that I've not been able to tackle yet, so I'd thought it best to get some advice.
If you are familiar with E-Commerce 5.0 for ERP you should have noticed that a Quote can only be referenced (used) by an Order one time. After that has occured, the next time you access the Quote on the B2B site, the "Order Quote" button is greyed-out. This appears to be standard functionality. The main issue is the fact that there is no way to change the order quantity before you press the "Order Quote" button. It is not a text field.
On the contrary, however, when creating a Quote within the ERP system (ECC6), one can reference (use) the Quote many times in the creation of Orders assuming you are not referencing the complete line quantity.
What is going on? Where should I start looking on how to adjust the "web" quote to allow for this re-use? Could it be as simple as changing the qty field from a label to a text box, which would allow the customer to change the value?
Any advice or ideas are welcome!
Thanks
Edited by: Bryan Fickle on Dec 3, 2009 9:21 AM

If anyone knows how to get a user-entered custom value from the item level to a custom java class, please let me know.
I'm still looking into how to extend the quote and allow for the re-use of it, if all the quantity on the line item has not been exhausted.
I can easily add a custom field to the header of a .jsp and access that user entered value by coding against the requestParser.
Example: Parameter xxx = requestParser.getParameter("customerHeaderParm");
But, when I add a customer parameter to the item level of the .jsp, I cannot leverage the same to code and get at the user entered value. The value comes back as null.
The two files I am working with are as follows: orderstatusdetail.jsp and Z_DocumentStatusOrderQuotAction, which is an extension of the standard class, DocumentStatusOrderQuotAction.
I am working with the requestParser within the ActionForward isaPerform() method of Z_DocumentStatusOrderQuotAction. I need to get to those item level values BEFORE the order is created from the quotation.

EHP4 for ERP 6.0 upgrade phase MAIN_SHDRUN/DDIC_UPG running takes long time

Dear all,
I just tried to upgrade a fresh ERP 6.0 EHP4 ready (Linux X86_64 - Oracle) to EHP4 ERP 6.0.
I go through phase MAIN_SHDRUN/DDIC_UPG running, but it takes a very long times.
I checked the server resources usage, it 's very low.
I checked on my ERP 6.0 system and also the shadow system (background job, SM50), it seems no activities on both).
MAIN_SHDRUN/DDIC_UPG running - what is this phase about?
Its normal for this phase to takes about several hours??
What should i check to ensure that the upgrade process is still running?
How can i estimate time needed for this EHP4 upgrade?
I installed that freshERP 6.0 EHP4 ready system only on around 3-4 hours.
Regards,
Fendhy.

Dear All,
I have same issue in ERP 6.0, EHP4 update, "MAIN_SHDRUN/DDIC_UPG" phase is still running, 24 hours passed. (only for this phase)
This is a NEW installation and on Production. I had no issues with DEV and QA and has taken only 50 minutes for the same phase.
Everything is same between DEV and PRD except, Production is on AIX HACMP cluster and using latest Ehpi installer + latest SPAM - version 41.
- There is no any error or warnings in /usr/sap/SID/EHPI/abap/log directory
- Phase is running, writing and reading files to installation directory
- No any automatic cluster fail-over mechanisms enabled
- Cluster has two nodes, DB+ASCS on one node and CI on other node.
- Shadow instance is running, can login, no errors in sm21, st22, no any running or canceled background jobs
- I can see 15% to 35% CPU "waits" in CI node where ehpi is running, but 50% of CPU is idle
- Also on same CI node, 70% to 100% disk busy waits can be seen on disks which mounted Ehpi installation directory
- On DB node CPU utilization and disk utilization is low
What could be the reason? Any idea ? How to diagnose.
Thanks,
P.D

Download fees for a single folio using a professional edition

Hey guys,
we are releasing a free monthly online magazine in the coming month, at first we considered the single edition option because of its 0$ download fees. the down side was that it wouldn’t allow us to be available in the android market or on the IPhone.
my question is, is it true that i will not be charged for downloads if i only have one folio published using a professional account?
(note that we don’t have a problem un-publishing a previous issue to download a new one.)
another question, is DPS available to purchase from the middle east, if not can i use an offshore account to purchase it.
Thanks in advance

HI Bob,
Could you please elaborate on that? From the above, it would read that a professional subscription can publish several single folio apps, without incurring download fees from Adobe. Presumably with the one-off annual fee and, if I understand correctly, without paying multiple Single Edition fees.
Thanks,
Simon.

Downloading JAR for temporary in-memory use or saved to local system?

Hi all,
I would like to be able to download and create a .jar file in memory, without writing it to disk, as an "option". My app should allow the user to reference an http://file.jar that gets "created" in memory on the client for temporary use, or they can optionally specify to download it and save it as a .jar file. I can't seem to find much info on either.
For the first case, basically, each time the app runs it should get the .jar file from the location specified, but without actually creating it on disk. Is it possible to download the binary of a .jar file from a web server and create it in memory so that it can be used? Or does it have to be stored on the local file system? If so, then I suppose I could use a "temporary" on disk .jar file, then delete it.
For the latter, how is a .jar file downloaded and saved to the local system?
Thanks.

I don't fully understand your question, but I think
you want to use JarInputStream.
-Ron

Minimum Spec required to Download Video for Rent or Purchase using iTunes

Howdy, I have an LAN ( 802.11G ) in an apartment complex, I find that viewing the Keynote address and other video content as it streams ( real time ) tends to stutter and stalls with "Lost Packets" Stats. using Quicktime Pro.
What are the Minimum Network Bandwidth requirements and acceptable Drop out rate to view streaming/real time video. (Such as Renting and purchasing from iTunes movies)
I know my hardware is adequate for it worked OK at another location.
H Trump

No problem to use another computer for downloading: Just log into your account and from iTines Menu Advanced select "Check for purchases ..."

Downloading driver for epson scanner 1660 using mountian lion

I have an Epson Pefection 1660 Photo scanner. I have not been able to successfully download a driver not that am running Mountain Lion. I have followed the Apple instructions but my computer finds no software updates.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14583&infoType=Down loads&platform=OSF_M_X8
Any use?

Just Downloaded Paid for and Can't use any advice welcome

An error occurred when attempting to change modules. This is the message I get

oops! whatever it was I reinstalled OS and it left

How can i download Keynote for ios 6.1.3?

How can you buy or download keynote for ios6.1.3 used on an iphone4.
With all the problems with ios7 on earlier iphone models, I have not updated past ios6.1.3.
In the App Store I can't download the latest version of Keynote because it only works with ios7.0 or later.

If not offered when you go to the App store, using your phone, you can't.

Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

Dear Experts,
We have solution manger 7.0 ehp1 ,
ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages In Miantenance optimizer I am getting the error.
Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
thanks

Hello,
we have the same error in our environment.
Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
" No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
Anyone with a solution here?
Greets
Jens

Can't find upgrade master dvd for ERP 6.0 EHP4 !

Where can I find the upgrade master dvd for upgrade to ERP 6.0 EHP4 (windows/oracle) ? Does anybody knows the right materialnumber?
My collegues has copied the relevant dvds from sap upgrade dvd-package to disk and I don't find th "upgrade master dvd" with STARTUP.BAT.
I looked into download area service.sap.com/swdc:
My Company's Application Components->SAP ERP->SAP ERP ENHANCE PACKAGE-> EHP4 FOR SAP ERP 6.0 / NW7.01
but there are only upgrade export dvs, language dvd, etc, but NO Upgrade master dvd, too!!!
Kind Regards,
Uta

Dear Ute,
i use this one "Number 51036889"
it is the Upgrade Master from NW701 which is also for EHP4.
Its located under the EHP1 Tree:
Installations and Upgrades" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" SAP EHP1 FOR SAP NETWEAVER 7.0.
hope this helps
Regards
Bjoern

Cannot download SPS15 for SAP ERP 6.0 from MOPZ

Hello gurus,
I need your help. I am planning to upgrade my ECC 6.0 system to EhP4 SPS3, but for this I need to update my system first from its current level of SPS09 to SPS15 (SP Level equivalent of EhP4 SPS03), so for this I want to download SPS15 from maintenance optimizer for my system EC2 which is an ERP 6.0.
There are two update options, right: Maintenance and Enhancement Package Installation. I chose maintenance, and then clicked next. But all i see is the following:
TArget Enhancement Package Version: SAP ERP EhP4 / NW7.01
Target enhancement package stack: SAP ERP EhP4 on NW7.01 - SP Stack (02-09)
But all i want to download is SPS15. How can I proceed?
Please advise.
thanks a lot in advance!
Cha Cha

Hello,
You can download SP stacks for ERP 6 from https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/swdc/sps/index.do?pvnr=01200615320900001296&u=&session_id=saI04682020110726143831SID%3aANON%3apwdf4962_OW1_01%3aV1BCP1X74ObZRnSxXvbbcuh1vWLml2Fhd4HPbVs2-ATT
if the solution of your support message takes long. You can always request the approval of the download basket with a message under component SV-SMG-MAI-APR.
Best regards,
Miguel Ariñ

Download EHP4 for ERP 6.0 using Optimizer

Similar Messages

Maybe you are looking for