Download error cannot load the DLL (pdh dll)

I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)

Try to run System File Checker tool (sfc /scannow): http://support.microsoft.com/kb/929833

Similar Messages

Error Cannot Load Resource File sqresus.dll

Would someone please help me fix the above error? It is preventing me from configuring or adding ODBC system DSN's. It also prevents the ODBC Test program to test an ODBC connection. Installing the newest ODBC drivers did NOT fix this problem.

1) Please verify that the mfc42*.dll's on your machine are version 6.xxx.xxxx
2) Please verify that the sqora32, sqresus, and sqoras32 DLL's are in your %Oracle_home%\bin directory and that that directory appears in your path.
3) Please verify that you are using the proper version of the ODBC driver (i.e. 8.1.5.10 on an 8.1.5 system, 8.1.6.3 on an 8.1.6 system, etc.).
Justin
null

Cannot load the animation file...

I am using Captivate 5 and Flash CS5. I created an interactive swf I am trying to import but when I try to drag it into Captivate nothing happens. If I go to "Insert > Animation" and select it, I get the error "Cannot load the animation file. The file is either damaged or is not available in the specified location."
I wrote the swf in AS3 from the start, it runs fine in Flash, no compiler errors and works fine in a browser standalone. I tried saving it with a new name in a new location, but no luck. I can import other swf's fine including ones that are a lot more complicated. Any ideas?

I believe I have somewhat figured out the problem. I had imported some graphics from Adobe Illustrator into Flash. When I deleted the folder containing these in the Flash library I was able to import the swf into Captivate. Oddly, once I had imported the swf into Captivate, if I then added the folder back in Flash and re-published, then right-clicked the swf in Captivate and selected "Update..." it said "All items have been successfully updated." and everything ran fine. But, if I removed the swf from the slide and tried to drag it back into Captivate, I got the same error however.
If I figure out what about the Illustrator files Captivate doesn't like I'll post back.

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2

Error while creating database - Cannot load backend library 'oci.dll'

Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?

I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks.

ACROBAT CANNOT LOAD IT'S CORE DLL - ACROBAT CANNOT LOAD IT'S CORE DLL

Is there a person who works for Adobe answering questions in THEIR own forum about THEIR own software? If so, why hasn't an employee of Adobe answered this question about the core dll not loading? It certainly appears there are a lot of Adobe CUSTOMERS who are experiencing this issue and is worthy of some time from an Adobe employee to get it resolved!
ACROBAT CANNOT LOAD IT'S CORE DLL
ACROBAT CANNOT LOAD IT'S CORE DLL
ACROBAT CANNOT LOAD IT'S CORE DLL

Here is the advice Adobe finally gave me:
Create a test PDF and attempt to reproduce the issue to verify that it
is not a file specific issue.
To create a test PDF file:
1. Open the Printers and Faxes Control Panel from the Start Menu.
2. Right-click on Adobe PDF and select Properties.
3. Select Print Test Page and save the PDF to the Desktop.
If the issue does not occur, then there is an issue with the original
file. You will either need to troubleshoot the content of the file or
try to recreate it.
If the issue persists with the test file, then it is possible that the
Acrobat preferences have become damaged. Reset the Acrobat
preferences and then attempt to reproduce the issue.
To reset the Acrobat preferences:
1. Exit all instances of Acrobat.
2. On the keyboard, hold down the Windows logo key and tap the #R#
key. This will open the Run dialog box.
3. Copy the following text into the Open field and press the OK
button:
%Appdata%\Adobe
4. Rename the #Acrobat# folder to #Acrobat old#.
5. On the keyboard, hold down the Windows logo key and tap the #R#
key.
6. Copy the following text into the Open field and press the OK
button:
regedit
7. Right-click on My Computer, select Export and then save the file
as #Registry Backup# to the Desktop. This creates a backup of the
registry.
8. Browse to: HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat.
9. Right-click on the 8.0 folder and select Rename.
10. Change the name from 8.0 to 8.0 old.
11. Close the Registry Editor.
12. Launch the Acrobat application and attempt to reproduce the
issue. Acrobat creates new preference directories.
I implemented their suggestions, however the registry key of HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat that they gave me was incorrect as ours is: HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\PDFMaker\8.0
I went ahead and renamed it to 8.0.old as instructed so time will tell if the Acrobat Cannot Load It's Core Dll error message goes away.

Error message: Cannot load the rpt file

Can anyone please help.
I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
1: Cannot load the rpt file
2: Object reference not set to an instance of an object
3: Invalid report file path
I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
Does anyone have any ideas to solving this?
Thanks
Tony

Hi Tony,
On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found.

Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation.

I am getting Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation when deploying from msi package. .
Need help to resolve the issue

Hi dingusmagii
Can you please share the following info:
-> Which OS and architecture are you on
-> What are the exact steps being followed for installation.
-> Do you have any previous version of Reader already installed on your machine.
Also it would be helpful if you can you share Windows Installer log. Please follow the steps below to create installer log
1. Launch Notepad
2. Copy paste the following text in notepad
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
"Logging"="voicewarmupx"
3. Now press Ctrl+S to save the file.
4. In the "Filename" field type <any_file_name>.reg for e.g. abc.reg
4. In the "Save as type" dropdown, select "All Files"
5. Click Save button to save the file at desired location
6. Go to the location where you saved the file and double click on it.
7. Follow the prompts to create the registry key.
After the registry key is added successfully, please re run the 11.0.07 patch installer. Once you get the error message click ok and then click on finish to close the installer dialog.
Now go to C:\Users\{username}\AppData\Local\Temp and look for file with name similar to MSIxxxxx.log.
Please upload the dump (compress the dump using WinZip or likewise) and share the link here.
For help see link How to share a document
regards,
Rohit

I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.

I rented a movie in the iTunes Store but now when I want to watch it it says; 'cannot load the movie' while it says the download has been completed.. What now? I already payed for it.

Did you rent the movie on your iPad? Are you trying to watch it on your iPad?
Do you have WiFi connectivity when trying to start viewing the movie?
You should have answered "yes" to all the above. If not, that is probably the source of your issue.

How do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update

how do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update?

i have trid from the adobe website and from the auto update notice, however
none have been successful. i am running windows 8.1 and i have another pc
running the same 8.1 and that one has successfully updated.
Philip P Copley
P.O.Box 3155
Norwood 5067
South Australia
[email protected]
(08) 8431 6885
0401 686 087

JMFSecurity Error: Cannot Load Library jmam

hi,
I get below exception when I try to run XletviewJMFExample.java program provided by sun.
JMFSecurity Error: Cannot Load Library jmam
I tried to set jmam.dll in the classpath,but I get following error when I compile program from command prompt
error reading C:\javatv_fcs\lib\jmam.dll; error in opening zip file
Please help me resolve this problem
Thanks
Rajesh

Hello,
i am running TestTVXlet on the Fedora Core 3.
I do set the path variable, but it still shows the "JMFSecurity Error: Cannot Load Library jmam" message.
Is the problem that jmam.dll is not suitable for linux?
Any advise will be appreciated. : )
Best Regards,
Tony

Report Server cannot load the extension

Hi,
I am developing a custom delivery extension with user interface for SQL Reporting Services. After some other issues that I was able to solve I finally reach this error here: "Report Server (MSSQLSERVER) cannot load the Custom extension."
Where "Custom" is my extension name.
I don't know where the problem is, this is all information I get. I also tried to deploy the PrinterDelivery sample which is part of the official SDK samples for SQL Reporting Services extensions. The weird thing is that this extension does not produce any
event log entries but it is also not displayed in the user interface.
I used this here:
http://msdn.microsoft.com/en-us/library/ms153647%28v=sql.110%29.aspx as deployment guide.
What am I doing wrong?

Hi guw,
By default, we can use the steps below to use a custom assembly in a report:
Build the assembly.
Copy the assembly to the following 3 locations:
    C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies
    C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin
    C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportManager\bin
Edit rsreportserver.config
under <delivery>
<Extension Name="Printer Delivery Sample" Type="Microsoft.Samples.ReportingServices.PrinterDelivery.PrinterDeliveryProvider,Microsoft.Samples.ReportingServices.PrinterDeliverySample">
   <Configuration>
    <Printers>
     <Printer>\\Server\MyNetworkPrinter1</Printer>
     <Printer>\\Server\MyNetworkPrinter2</Printer>
     <Printer>MyPrinter</Printer>
    </Printers>
   </Configuration>
</Extension>
under <deliveryUI>
<Extension Name="Printer Delivery Sample" Type="Microsoft.Samples.ReportingServices.PrinterDelivery.PrinterDeliveryUIProvider,Microsoft.Samples.ReportingServices.PrinterDeliverySample"/>
Open the rssrvpolicy.config(uder C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin) with text editor. Then add the following code group to the file:
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="PrinterDeliveryCodeGroup"
Description="Code group for my delivery extension">
<IMembershipCondition class="UrlMembershipCondition"
version="1"
Url="C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin\yourAssembly.dll"
/>
</CodeGroup>
Open the rsmgrpolicy.config(uder C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportManager\bin) with text editor. Then add the following code group to the file:
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="PrinterDeliveryCodeGroup"
Description="Code group for my delivery extension">
<IMembershipCondition class="UrlMembershipCondition"
version="1"
Url="C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportManager\bin\yourAssembly.dll"
/>
</CodeGroup>
Add the assembly reference in the report.
The following sample extension is for your reference:
http://msftrsprodsamples.codeplex.com/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache

hi,
I have created a separate project which contains a class which has some generic methods- its a Utility class.[ its a class library project ]
I added this dll into my SharePoint project's wsp package [package--> advanced-->add assembly project from output ] [ SP 2013/ VS 2012]
So till yesterday everything was working fine, its has successfully deployed in the GAC.
But today when I tried to deploy my solution I got this error
"Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache" .
I closed the VS and did iisreset , and uninstalled dll using powershell . and i went to package removed the dll from the wsp package and deployed again.
Now when i added the dll into this package again, it failed to deploy.
can anyone tell , why this is happening. i have not done any changes in the dll yesterday or today.
suddenly , it started behavin stranegly.

Use the power shell command to delete dll
http://www.c-sharpcorner.com/uploadfile/anavijai/how-to-install-or-uninstall-dll-in-gac-using-powershell/

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Download error cannot load the DLL (pdh dll)

Similar Messages

Maybe you are looking for