Download failed (updated browser) Nokia 206
Could anyone please advise on the following?
I have a Nokia 206 mobile and to date getting on the internet on the Nokia Xpress 2.2.0 browser has been fine. However i now cannot use this as i am being prompted to download an updated browse,r the 4.0.0. I follow all the steps to download this only to get the message 'downloading failed'. So i now cannot get on the internet. Help! Thanks. Ian
Does this help?
Similar Messages
-
Failed updates with Nokia N82 or 6220 Classic? Sen...
A request from the Nokia Software Update team:
Dear Updaters
We monitor all updates and update failures and have noticed a higher number of failures when updating an Nokia N82 or Nokia 6220 Classic.
These products passed our own testing, so we would like to ask for your help. Last year, this exercise proved invaluable when Microsoft made a Vista patch, and users helped solve the issue. We hope that you can help us again now.
If you have recently had a software update failure with your Nokia N82 or Nokia 6220 Classic, please send us the following information:
1) Date/time of update.
2) Device IMEI or serial number (enter *#06# from the phone display, or copy the long number from the battery compartment label.)
3) Logs from C:\users\All Users\Nokia\Nokia Service Layer\A\Logs
4) adl_flash.log from your Temp folder (Goto Start > Run > Enter %temp% )
Send the files to [email protected]
The log files should not be more than a few hundred KB, and if there is any other information you wish to share with us, we welcome your feedback.
Many thanks for your continued help.
Warm regards
The Nokia Software Update team
Message Edited by vandelay on 15-Jan-2009 02:17 PM
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".if nsu bricks phones then nokia should completly take NSU off there site n stop people from updating. its a product from nokia that should be up to standards. im just saying when vista released they had problems with NSU and took there time to prepare a fix and now a year later that same problem exists on n82 n 6220c.
also look at how many users have had there phone go through recovery mode or blinking screen. nokia are so advance with there phones n they cant be bothered to implement FOTA in all there new nseries, eseries devices were this reduces the phone bricking as FOTA are little updates.
Nokia need to stop the NSU and prepare a ultimate fix for it. They make to many new applications and they cant even fix the problems that exist with there PC suite, Nokia Music Manager etc.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions! -
How to download fp1 update for nokia 701
Is there any manual ways of downloading.???
we are facing 3g sim problem after updated in new version fp2 what's the solution for this problem.
-
Problem following failed update on Nokia X6
I used the PC Ovi software to install the update to my x6 last night, that failed due to insufficient battery (15%) so I charged the phone overnight and tried again this morning at the 'retry' that I left up.
That started up, went through the phases (backup etc) until the final one which failed with a message about 'Timeout' - thought that might have been related to the phone going into screensaver ?
The message (which I unfortunately quickly clicked off) indicated I could install the s/w update that was on my phone but I can't woprk out how. There is no update awaiting installation on the list of updates.
Phone s/w version I'm currently running is V31.0.004 27-12-1010 Custom version 31.0.004.249.10
Solved!
Go to Solution.Hello @middle_one,
With the Ovi Suite (when you have connected your phone to your PC via the
cable you got with the phone) you can reinstall the latest firmware you
have in your phone.
Just hit the green arrow you see on far right in the upper line. The Suite checks
if there is new updates available and there where the information concerning
your phone is, you see text "reinstall current software" (or something like this. sorry,
I have the Finnish version). Hit it and you'll get your software reloaded.
-vvaino
#SwitchToLumia -
Comes With Music - Download Failed
Any help gratefully received guys...
Can download via my X6 No problem whatsoever...
Try to download through my PC and I continually get "DOWNLOAD FAILED"
Updated the Ovi Player about a month ago and the problems seem to start after this... Any ideas?Looks like you too have the same problem: /t5/Music/Download-failed-in-the-new-Ovi-Music-Store/td-p/656818
-
hello,
i have nokia 2865 my phone code is 0539622, i am trying to update its softwate as i am facing some problems such as some jar files not supporting and as connect my headset it shows printer sort of enhancement connected.
i downloaded software updater from nokia's website and after installation and running it says plz make sure that sim card is inserted and i checked my phone the sim card was properly at place. its not moving ahead and i am not able to update my phone plz help
nareshI'm afraid there's no other option to update the firmware in your phone. Perhaps you can try installing it after restoring factory settings (Type *#7780# at the stand-by screen, enter the lock code, default is 12345). It may or may not help. You will not lose your data.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You... -
Nokia 206 UPDATE AND CONNECTION ISSUE.. CERTIFIC...
This is my first asha and it is giving me problems. cant connect to the nokia account or the update site. says "CERTIFICATE NOT VALID ACCORDING TO PHONES DATE" WHAT IS THIS......??VERY FURSTRATING... IF SOME BODY CAN GUIDE ME TO A SOLUTION, MUCH APPRECIATED..... THANKS A TON...
Hi,
Welcome to the forum!
If the error Certificate not valid appeared, you need to check these two information:
1. Check that the current date, time and time zone in your Nokia 206 are correct.
2. Check that your device has also a latest software installed. Make sure you have an active and stable internet connection when you do this. To verify if there's an available phone's update, go to Settings, select Phone and then Device updates. You may then select Download phone software.
If you're done with that, try to connect to your Nokia account and see if it's still the same. -
Downloads failing with the latest update
Hello,
I cannot access my scripts with the new update. It locks up both the desktop application or the browser and I get the download fail warning.
Please I need to access my scripts
BriceThanks for the fast reply,
I use Mac, Snow Leopard latest update, Safari.
Yes I am able to sign in on both the browser and the desktop app. I can access the project panel.
The problem is when I try to open a script. It start normally and then the apps locks up and I have to force quit it. It does the same thing with the browser except it unlocks itself with the message from Adobe Story that the download has failed.
Hope that helps
Thanks
Brice -
I downloaded an update for my Safari web browser to "snow leopard". When I click on the .dmg file, a window opens up with a .pkg file but when I click on the .pkg file I get a prompt saying that it doesn't know what program to open it with.
I suspect if you're trying to open a file in 08 that's been opened in 09 the file has been updated to 09 and will not open in 08.
-
"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpauldingI just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding -
Jeez. Trying to view items in youtube. I keep getting a blacked out picture telling me my browser is out of date and I need to download the update. I do that and then it doesn't connect so I'm back at square one.
Hi MiMattheMac, you probably won't have any problems but just be aware upgrading from Snow Leopard to anything later is a big leap. Old, PowerPC - only programs won't work, for example, and even more recently developed programs won't work if their developers have not been updating them for recent OS X versions.
If you haven't made a backup of your Mac yet, and you consider the information on it important, please consider doing that. It is the only practicable way to "undo" an OS X upgrade should you want to. Merely having a backup seems to preclude the need to ever use it.
If the information on your Mac is not important to you, upgrading to Mavericks is even easier since you can completely erase the Mac first.
In any event let the download complete.
If this raises any concerns about installing it, and you need to ask questions to alleviate those concerns, you can just close this window when it eventually appears:
The 5 GB downloaded file will not be deleted and will remain available until you actually install Mavericks. You can do that at any time convenient for you. -
Nokia 206 does not turn on after update
Hi
Just got a Nokia 206
Updated the software. Itupdated and restarted fine
Then I checked for updates again, and it updated a second time
Everything went fine, and the phone restarted. It said "Update Successful" or something like that
I remember that the SW version was from May 2013 (first update was MArch 2013 I believe)
I tried to update a 3rd time and it said that there were not more update availabale
I was happy !
I checked that internet worked, sent an email, everything worked fine
Then I turned off the mobile to try another SIM card, but when tunring it on, the screen goes black, then "NOKIA" is displayed on the screen for few sec, then the phone turns off
I tried to :
_ different SIM cards
_ using 1, 2 or 0 SIM cards
_ holding power button up to 10 - 15 sec (hopping it will do some reset)
_ tried to find a hard reset button, but did not find...
So basically, the phone is not turning on. Only "NOKIA" is written for few sec, then phone turns off again
The phone is un-usable as such
Please Nokia, what should I do to fix that ?
Regards
Bastienwhen I plug the power supply, the charging icone shows up
When I try to start the phone then, the screen gets all white for less than a second, then black for 1 to 2 seconds, then all white for less than a sec again, then turns off
When I press again, it goes back to the charging icon (the white and orange battery charging)
Also, I forgot to mention that sometimes, it does not do the short vibration it used to do when trying to turn on -
I have changed my Apple ID and may be anything wrong did with Disk Utility.
So , I could not download system updates by normal way and downloaded them from Apple site via Folx and have them installed thus.
I have tried check out condition of Toshiba disk and got messages of errors.
What can I do in this situation?
In Disk Utility:
Storage system verify or repair failed.
Problems were found with the partition map which might prevent booting.
Problems were encountered during repair of partition map
S.M.A.R.T status verified
In ColorSynk Utility:
Searching for profiles...
Checking 64 profiles...
/Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/Smokey.icc
Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Prosystem ufiles/TealMagentaGold.icc
Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
Tag 'pseq': Required tag is not present.
Verify done - found 4 bad profiles.
In ITunes :
I see my old email as Apple ID
I going to change Lion OS to Mountain Lion OS ,is there any troubles ahead because of problems described above? And how to fix all that ?
Thank you in advance.
Message was edited by: TatianaTiaPS
In Disk Utility all looks so:
Verifying partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were found with the partition map which might prevent booting
Error: Storage system verify or repair failed.Verifying and repairing partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
I will be greatly appreciated for any considerations or advise (*.*) -
On Friday, 9/17 @ 7 am, after deselecting Windows 2003 in products, I ran Server Cleanup Wizard (as well as sqlcmd -I -i"WsusDBMaintenance.sql" -S "np:\\.\pipe\MSSQL$MICROSOFT##SSEE\sql\query"), and 0 bytes were freed which I thought
odd. I then selected Windows Server 2012 R2 and Office 2013 since we're going to be using those.
After this, on 9/19 @ 7:30am, the server had the message: Event 364 Content file download failed. Reason: There is not enough space on the disk. Source File: /d/msdownload/update/software/secu/2014/04/coreservermui-it-it_ebb7e1e8d487b90ffd719f06122a3db947b3f949.cab
Destination File: e:\WSUS\WsusContent\49\EBB7E1E8D487B90FFD719F06122A3DB947B3F949.cab.
At some time during the day on 9/19, our SAN admin increased the volume (all server's volumes are on a SAN) from the SAN end, and I extended it in Disk Mngmt on the WSUS server. I went home for the weekend
I came back today (9/22), saw I had gotten the "the server is failing to download some updates. Event ID 10032" on Saturday 9/20 @ 1:30am. I checked the volume \WSUScontent is on (the volume we extended) and it has
17GB free. So I assume space should not still be an issue.
The same 10032 error had occurred on 9/19, at 1:30 pm, but I assume it was before my colleague and I bumped up the disk space. But why it occurred again the next day I'm not sure.
However, since the 10032 error on 9/20 @ 1:30am, it has not reoccured, and no yellow or red event messages. So possibly all is well now. Could it have been that WSUS was being sluggish to recognize the increased disk space, even though Windows
itself recognized it?Thanks Lawrence, I went through the steps you instruct on (which I did not know about, so I greatly appreciate that!), and freed up over 30GB of space.
Outstanding! :-)
But your steps don't really address deleting all (solely) 2003 updates.
Correct. First, because you cannot DELETE updates, unless they are expired or old revisions, and use the Server Cleanup Wizard to do that.
Second, because the article was about removing *unneeded* updates. It does not consider the scenario where a product category is being retired
When I go to my "2003" update view, sorting by Any Except Declined, and Status Any, I still see tons of 2003 ones, some solely for it, others that apply to 2003 and other OSs. I want to leave the latter, but delete the ones solely for
2003. Not just superseded ones, but ALL that are solely for 2003.
You cannot delete updates. You can DECLINE updates, if that's what you want to do.
So let's talk a minute about these updates that might be applicable to operating systems other than Windows Server 2003. Let's be practical about the other operating systems listed. If you look closely, I suspect you will discover that those "other
operating systems" are either Windows XP or Windows 2000, but nothing else. Do updates for Windows XP or Windows 2000 really matter to you? I suspect not.
The reason I highly suspect this is because the practice of building packages targeted at multiple operating systems was terminated when Windows Vista was released (actually I think it happened with the release of WSUS v3, but this is just a matter of trivia,
the relevant point is that it's not done anymore, and has not been done for many years).
Ergo, I know for a fact, that NONE of the updates applicable for Windows Server 2003, will be applicable for any newer operating system. Ergo, it probably doesn't matter at all, so just SelectAll -> Decline if that's what you want to do.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006
Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason
Maybe you are looking for
-
Error when installing Oracle Identity Management 11.1.1.6
Hi all. I'm new on OIM 11g world. When I install OIM that guided by Documentation. But I usually get an error on Extend JRF phase, the error message on log is: Action: See logs for more details. Step Extend JRF failed Error Extending Targets With JR
-
Physical inventory document - for all A parts
Hi, We are in the process of preparing our system for physical inventory count for all A parts (Cycle count indicator is A). 1. We ran MI24 to get all open physical inventory documents.(they are around 100). 2.Then we ran MI31 (didn't create batc
-
Hi probably a simple question but how do I get my Flash video to fill a user browser when it opens, the example I am trying to replicate is the following:- http://www.goldfrapp.co.uk/ I have been trying for ages but with no joy so any help will be gr
-
Uploading amendments-desparately need help
I have a live site which I have been updating a lot quite recently but since last thursday I have been getting this message Started: 17/05/2007 11:34 htdocs\products.html - error occurred - An FTP error occurred - cannot put products.html. Access Den
-
Fullscreen javascript api in edge?
Hey Edge Animater! I don't get the fullscreen javascript api to work. I want to make a button to view pictures in complete fullscreen. So I use it's click function and paste the code from (How to Use the HTML5 Full-Screen API (Again) - SitePoint) var