Download file fails with 404 error in SLD export of business system
Hi all,
We just upgraded to 2004s, and when I try to export BS to a file, I get a 404 resource does not exist error. I wanted to find out which service needs to be activated in either the J2EE stack or the abap stack to allow the download.
thanks,
chris
Hi,
1) Did you maintain Client, userid, password, and lang information in SICF transaction -> sap/xi/engine ? Double click on service and check whether you have entered correct information.
2)Access the trace file and search for traces with severity ERROR, WARNING or stack traces.
If we do not find an error in the log file or the error message does not explain the problem sufficiently, access the default Trace. The default trace file contains detailed messages for developers. Extract the relevant trace information e.g. using the time stamp or the message ID.
If this does not explain the problem in more detail, increase the trace level and reproduce the problem. Then restart message processing using the message display tool. Mark the message and select repeat.
3)Check the Note-803145
4) 404 is an HTTP response code that indicates that the resource in question could not be found. Usually this is due to an incorrect URL check all URLs.
5)The SOAP message that sent might not have an envelope.
Regards
Agasthuri Doss
Similar Messages
-
Downloads keeps failing with "An Error has Occurred"
Happy New Year All
New to the Apple Mac World having switched from Windows. I've just bought a new Macbook Pro and when I go into the App store to purchase, the installations seem to be very temperamental.
I've been to install twitter, along with updating iWorks - with Numbers and Pages failing to install/update at the beginning.
I was finally managed to install pages, but uninstalling and then installing.
With numbers, it did install but kept saying I needed to update, so I did the same and uninstalled but now it just keeps telling me and error occurred please try again in the purchases page, but same problems occurs. Each time I try installing again, I notice that the download is always pulling a previous download from somewhere (cache??) and seems to always fail at the last bit.
Does anyone know how I can fix this problem? Ordered Mac Online and slight peeved that its not working... which is not what I would associate to Apple.I believe I have found the issue.
Our portlets are being accessed over WSRP. Both consumer and producer portals are BEA 8.1 SP6. The problem was that the HTTPS call back to the producer timed out on the consumer so it was the consumer portal that hijacked the response to the producer request.
In the consumer's WEB-INF/wsrp-producer-registry.xml file, there is the element "connection-timeout-msecs". The default is 60000 ms. When I switched that to a larger time (say 999999 ms), I did not see the problem. -
File failing with ICM_HTTP_CONNECTION_BROKEN error in SAP PI
Hi Expert,
We have file to proxy senario in our production environment where, while sending the file from PI to ECC syestem via proxy, it fails below with error in call adapter step.
Have tried with many options mentioned in scn.sap.com site like
1. Increasing the HTTP ICM PROCTIMEOUT paramaters.
2. restarted ICM in both sender and receiver system.
But still it is not resolved yet. Please help.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_BROKEN</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://cimbp05.hsec.emeadc001.philips.com:8005/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://cimbp05.hsec.emeadc001.philips.com:8005/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://cimbp05.hsec.emeadc001.philips.com:8005/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Network connection broken</H2><br><hr> <table border="0"> <tr><td>Error:</td><td>-8</td></tr> <tr><td>Version:</td><td>7210</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Mon May 4 14:12:57 2015 </td></tr> <tr><td>Module:</td><td>icxxthrio_mt.c</td></tr> <tr><td>Line:</td><td>848</td></tr> <tr><td>Server:</td><td>cimyp25_MYP_25</td></tr> <tr><td>Error Tag:</td><td>{-}</td></tr> <tr><td>Detail:</td><td>Connection to partner broken</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 401, error text: ICM_HTTP_CONNECTION_BROKEN)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Regards,
Vishnu SrivastavaHi Praveen,
As per the solution mentioned in the link we have checked for the icm/HTTP/max_request_size_KB parameter in Quality and production environment. It is maintained as icm/HTTP/max_request_size_KB= 102400.
Also we are able to process the same file in quality but not in production though the parameters are same.
Please help..!!
Regards,
Vishnu -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"
When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe -
hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you
hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer -
PSE12 download keeps failing with error codes DF006 and DF016. [was:Question]
I have purchased elements 12 for my Macbook pro but the download keeps failing with error codes DF006 and DF016.
What can I do?Is there an Exit Code indication that precedes the DF indications? If so, try searching this forum using that "Exit Code #" substituting the number for #
-
Installer MSI fails with no error or message of any kind. Tested compatability with the windows compatability check and it comes back as not compatible. What now?
Hans,
It is a known problem on Windows 98, Windows and Windows 2000 if you are using Intel Pentium 4 processor with Sun JRE and Symantec JIT. I had the same problem with Windows 98. Oracle has a patch. Please see Note:131299.1 on metalink for details. -
Downloading Update Failed - Internal Module Error
Trying to update my Nokia 6630, and each time it completes the 25mb download before giving me the error.
Downloading update failes
Internal module error
Is this because my phone is a a Vodafone fone, and therefore locked by their software to some description? Or is it a more sinister (or simpler) error?28-Mar-2008 01:07 PM
blue_panther9_9 wrote:
Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me....
28-Mar-2008 01:07 PM
blue_panther9_9 wrote:
Could anyone help me with this problem
i've installed NSU and nokia pc suite(all latest..)
i've plug the my n95(v20), detected by PC suite...
i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
after it finished downloading, when it try to install it.. it says
"Downloading update failed"
"internal module error"
maybe i didnt read the instruction about change profile to general..
i changed it to general, the problem still the same...
okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
so i used my other computer(maybe there is some problem with my vista), so i used my XP...
and it still showing the same problem..
i've used that msxml4 solution, but it still didnt work...
Please help me.... -
Disk Erase failed with the error- Operation timed out
I've checked my computer- Mac Book White in Apple store, everything is fine just the hard disk has been corrupted. Needed to erase and reinstall. By the time I wanted to erase it, I can't erase and appears "Disk Erase failed with the error- Operation timed out".
Anyone knows how to solve this question would be nice.
ThanksWell give this a try:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now download a utility like TinkerTool System or Leopard Cache Cleaner - VersionTracker or MacUpdate - and use it to clear out your system, user, and font caches.
And, try this for the software update issue:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder) -
Rendering of Proxies in AE fails with generic error messages.
*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs. -
At DI R3trans fails with this error code ORA-12545, but CI runs
Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541' 17 0.187511
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 12541 13 0.187524
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541) 14 0.187538
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 12541 14 0.187552
4 ETW000 [dev trc ,00000] ORA-12541: TNS:no listener
4 ETW000 22 0.187574
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433] 14396 0.201970
4 ETW000 [dblink ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433] 39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web. -
External Drive Disk Erase Failed with the Error Input/Output Error
I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
MatthewSOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6) -
The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '2013-07-09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event> -
Partition failed with the error: No space left on device
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore
Maybe you are looking for
-
Project X - Turning a Pismo into an iMac
Hi everyone, Some of you may remember that last year I bought a Pismo with a smashed screen, specifically for the 500MHz processor, RAM and HDD. Well, now I've decided what to do with it - I'm going to make the machine into the world's first TFT iMac
-
I need a v.10.5 driver to run a Canon SELPHY and my Mac is v.10.9.4. How do I make this work?
I have a Canon SELPHY printer that requires a MacOSX v 10.5 driver. I cannot get it to operate with my Mac. What do I do?
-
SPAuditEntry.ItemId does not match Listitem.UniqueId
SPAuditEntry.ItemId does not match Listitem.UniqueId. I am trying to get the count of mostly viewed item in a document library.
-
Hi I'm getting a List of Entitys by String _selectStr = "SELECT a FROM " + GNebenengGruppenverwEntity.class.getSimpleName() + " a"; Query query = getEntityManager().createQuery(_selectStr); return (Collection<GNebenengGruppenverwEntityIF>) query.get
-
Forgive me if this has been answered. A search sent me to this page to create a new entry. I've been dumb once today, I'm not taking any chances. I realize the likelyhood of being infected is slim to non existent, but if I'm unsure I know there are