Download file for my dock & Time Machine

I had to do a reinstall om my Mac, and everything is gone that used to be there.  I don't know how to use my Time Machine, and my download file is gone from my dock and also from the drop down menu in the Finder.  What do I do~??  Can anyone help me please~???
I'm using a 27" flat screen Mas OS X (10.9.2)

You have a Time Machine backup, that's a good thing. You can restore from your backup using Migration Assistant http://support.apple.com/kb/HT4889

Similar Messages

  • HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

    I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?  No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

    1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
    2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
    (110331)

  • I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

  • Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

    Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
    Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

    Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
    Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

  • I bought a new external hard drive for backups, but time machine won't do a full back up.  I think it is remembering backing up onto previous external hard drives, which I don't own anymore.  How do I do a new full backup?

    I bought a new external hard drive for backups, but time machine won't do a full back up. 
    I think it is remembering backing up onto previous external hard drives, which I don't own anymore.  How do I do a new full backup?
    When I bought the new (used) iMac, I also bought an external hard drive for backups.  It worked fine, but my husband stole it.
    Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
    So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure. 
    Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up.  Instead, it took 30 minutes.  That can't be right.  I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that.  Please help.

    Triple-click anywhere in the line below to select it:
    tmutil compare -E
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • I want to transfer all my iPhoto, iTunes, contacts, etc. files from my MacBook, which I am selling to a MacBook Pro. What is the easiest and safest method of achieving this? Can the files backed up on Time Machine be transferred to the Pro?.

    I want to transfer all my iPhoto, iTunes, contacts,documents, etc. files from my MacBook, which I am selling, to a MacBook Pro. What is the easiest and safest method of achieving this? Can the files backed up on Time Machine from the MacBook be transferred to the Pro in some way? I would like to capture the files as they appear on the MacBook, such as "Events" in iPhoto and the various song categories within iTunes without having to rename them all once saved on the Pro, which is the case with photos when I simply save them to thumb drive and import them to the Pro. Sny advice would be appreciated.
    Best regards,
    Rob.

    Michael,
                 Thanks for all your assistance. There is no need for apologies, Migration Assistant did indeed create a second account for the MacBook data. It has just taken me some time to figure out how to access it. I now have all the MB data in one account and the MBP files in another, which suits me fine. In fact, it is an advantage in my case as it keeps the private and business aspects separated.
    I will however try the fatcatsoftware to transfer all the iPhoto files to my iMac, where I keep my main photo library. and it will be of help to keep the events, etc in the transfer. As far as iTunes is concerned, I have HomeSharing on all my computers and this has obviated the need to worry about playlists being transferred successfully. However, HomeSharing did not appear to share the iPhone/iPod apps that were stored on the MB and although these have now come across with the new MacBook account on the MBP, I was wondering whether my iPhone and iPod will be recognised by the MBP and sync with it? Will I need to have the MB account open to achieve this or will the MBP recognise and sync with the iPhone/iPod automatically irrespective of which account is open?
    Thanks for the tip on deauthorising my iTunes account from the MB before sellng. This I will do and I believe the best way to remove all of my data from the hard drive is to reinstall the MacOSX operating system software. Is this the right approach to securely delete everything?
    Thanks again for sharing your expertise and your guidance through this exercise.
    Best regards,
    Rob.

  • Restore Files From an Old Time Machine Disk

    Please forgive and send me a link if someone has already answered this but I need to restore files from an old Time Machine Volume to my current desktop.
    How do I do this?

    control-click on TM in the dock and choose "browse other TM disks". choose your old TM backup to browse and restore what you need. also, you can always open your TM drive in finder and copy what you need directly via finder.

  • Partitioning an ext. HD for use with Time Machine HFS+/FAT32

    Hi, I hope that this question is not already answered somewhere - I did a couple of searches but couldn't find the answers I need.
    I'm setting up an external LaCie 500GB HD (USB 2.0) for a friend, in order to use it for Time Machine backups (one partition) and as a non-backuped "data dump" (music / films etc.).
    My plan is the following: Partition the ext. HD into a 200 GB HFS+ Journaled partition for use with Time Machine, and a 300 GB FAT32 partition for data (FAT32 to ensure the interoperability with PCs).
    I have a couple of questions (apart from if you think the proposed setup is good in general):
    1. The Time Machine partition would be used to back up a MacBook with a 120GB HD - in your opinion, is 200GB too much/enough/too less space?
    2. In general, does Time Machine work with partitions on ext. HDs as seen in the setup I propose? (or should I use a drive with only one partition?)
    3. are there any possible problems I might run into when partitioning a drive into two different file systems as HFS+ and FAT32?
    4. Is it OK to use the Leopard Disk Utility for this or should I use another application?
    thanks a lot for your answers!

    Hi,
    Could you please share the answers you found?
    I'm going through a very similar situation...
    Thanks!
    Beto.

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • Want to restore my computer, but only with a few files; not a complete Time Machine restore

    My computer's messing up and I decided I might as well start fresh, but I want some files and folders back obviously.
    I take it, I simply need to:
    Turn it off
    Turn it on and put the install disc into it, meanwhile holding the C key
    Install Snow Leopard
    Once it's installed, select the external drive I'm using for backups
    Open Time Machine, right click on files/folders I want to restore.
    What will and won't work? Because, it seems to me you can't redownload movies from iTunes. What about the settings? Is there some sort of .yml or something somewhere that holds them?
    And, something I'm dreading, how will I get my programs back? Will I need to reenter the product key? I have Adobe Production Premium CS5.5, should I deactivate it then reenter the product key? What about the plugins for After Effects? Also I have MPEG Streamclip, and when I bought it, I don't remember having to enter any product key.
    And my copy of Office for Mac 2011, I bought the 2008 box and it came with instructions of how you're eligible to get 2011 once it's available, when I went to install Office for Mac on my MBA, the offer was no longer available.
    Thanks in advance.

    I understand the basics, I just want to know how to restore certain items essentially on a new computer without restoring everything.

  • Best hard drive for use with Time Machine

    Hi,
    Has anyone determined what the best external hard drive is for use with Time Machine? Is there a particular one that works exceptionally well with Time Machine, or is it much of a muchness?
    I'm looking for a Firewire 400 & Firewire 800 drive that STAYS ON all the time, and doesn't automatically spin down or spin up like the rubbish WD My Book drives do.

    I can't tell you if it is the "best" hard drive for you to use with TM, but I'm quite happy with the 500 GB Buffalo Technology DriveStation Combo TurboUSB I bought recently. It is quiet, quite inexpensive for the capacity (I paid about $120 for one on sale at Fry's), & completely compatible with OS X & TM.
    Best of all for me, it automatically powers down when my iMac sleeps. It also spins down after a time if the Mac's Energy Saver preference "Put hard disk(s) to sleep when possible" is checked; otherwise it remains spun up until the Mac is put to sleep or switched off.
    It comes with "Turbo" USB & Memeo "AutoBackup" software, neither of which I installed. (The box didn't claim these extras came in a Mac version but both Mac & Windows versions were included on the CD.) Out-of-the-box, I reformatted the drive with the Apple Partition Map scheme & two partitions, a 160 GB one for cloning my internal drive & the rest for TM. The drive works perfectly for both uses & seems quite fast, as one would expect from a 7200 rpm SATA drive.

  • Partitioning an External 320gb drive for use with Time Machine and...

    I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
    Is this possible?
    I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
    Has anyone done this before?
    Cheers-

    Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
    See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

  • HT1553 i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

    i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

    When you restore from a Time Machine back up you can pick and chose what is restored. It is not an all or nothing process. Nor do you have to do the partial restores all at the same time. If days after the first partial restore you find something else you want you can restore just that.

  • My Lightroom 3 DVD is broken, i need a Download File for Mac. I still have my Serialnumber.

    My Lightroom 3 DVD is broken, i need a Download File for Mac. I still have my Serialnumber.

    Hi Stefan,
    Please go through the link below to download Lightroom3.
    http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    Please go through the 'Very Important Instructions' on this page to initiate the download.
    Regards,
    Anand

  • HT201302 I have a new iPod Touch and am trying to download photos for the first time.  Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them.  Nothing happens when I click on anything in e

    I have a new iPod Touch and am trying to download photos for the first time.  Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them.  Nothing happens when I click on anything in either.

    If you manually open iPhoto do you not see the photos?
    Maybe here:
    iOS: Unable to import photos or device not recognized as a camera
    Yu are trying to impoort photos taken by or saved to the iPod, right? If the photos were synced to the iPod then iPhot does not work.

Maybe you are looking for

  • How to change shape properties after having created one?

    Photoshop CC 2014 -- latest update as of October 06, 2014 Windows 7 How can I change a shapes properties after having created one. I have created a simple ellipse. When I drew the ellipse with the tool, I had the option for the fill color/style and s

  • Copy/pasting content into one project from another.

    When I copy pictures from one project into another, it just leaves me with black pictures for the duration of the other ones...how do I fix this?

  • Which DB table for user profiles?

    Which Database table does Weblogic Portal server store users? We need to populate that table from an external data feed, since the master copy of our users are in an external system(not LDAP). The basic idea of the feed is so <um:> tags, and the out-

  • How to config Time capsule remote access with Motorola SVG1202 router?

    I'm having difficulty trying to congif Time capsule remote acces. I have a router Motorola SVG1202 and Time capsule config to Bridge mode, when I change Time capsule config to "DHCP and NAT", an error of "Double NAT" happens. How to correct this? Tri

  • Partitioning an external HD (Seagate freeagent desk)

    I am not sure where to post this because it has to do with a HD that will be accessed by a PPC-G5, an Intel Macbook and XP. I just got a 1 TB USB 2.0 external hard drive and I would like to achieve the following... 1) Access the drive with a) PPC OSX