.download files not clearing after download

Hi,
When I download a file using Safari, the ".download" file that is created temporarily never goes away when the download is complete. I have to trash it manually.
I am on 10.8.2 and Safari 6.0.2 but as far as I can remember this has been happening since Lion came out. When I went to Mountain Lion I wiped the drive and did a clean install, still happens.
Only happens on one of my Macs.
Anyone have any idea how to fix this? I have "Remove download list items" set to "Upon Sucessful Download" and I have Open "safe" files checked. I switched to "When Safari Quits" briefly but that did not make a difference.
Thanks
Dave

Hello Cor-el,
I went to Tools>Options>Privacy and it is checked off as you indicated/noted...
I will check out the URL downloads+windows later this week...
ZoneAlarm will not work with the latest Firefox versions 14 (or earlier ones)... so reverted to an older version of Firefox and ZoneAlarm... and it works! Aside- it is ANNOYING to click on latest version upload for Firefox and then get a screen showing what software is not compatible with that version. So I needed to remove the latest Firefox version and ZoneAlarm.. and re-install both.
No need to use Firefox 10.0.6 ESR because I am a small home user and not a big organization?
Thanks for your help, I will have to make the time this coming week and look into this further.
SyBerGuy2
P.S. The files are still not downloading and saved?

Similar Messages

Quality of pdf files not clear after conversion (Adobe Acrobat 9.0 Std)

Hi,
I am using Adobe Acrobat 9.0 standard and my computer is running on Windows XP SP3 (with Office 2003 SP3). Everything used to works fine until my laptop crashed and I need to re-install everything.
Now when I want to convert PowerPoint presentation files (with pictures, diagrams), the pdf version becomes not clear and the fonts are smudged.
I have re-install Adobe twice but ended up with the same problems. My colleague is able to convert the same PowerPoint using CutePDF without any problem.
Please help. Thanks.

You may want to try the following steps:
open a pdf file
click Edit
click Preference
in Resolution section: select Use system setting: 144 pixels/inch
in Rendering section: select For Monitor, select Smooth line art, select Smooth images, select Use local fonts, select Use page cache
in Page Content and Information section: select Use smooth zooming, select Use smooth scrolling
click OK

Printing quality Is not clearly after Acrobat 8.1.2 Pro updating (HP Deskjet 9800)

*** The contents wrote with the auto compiler. (Korean -> English)
*** Meaning of the writing could not be delivered smoothly.
From Adobe Reader 8.1.2 Application Printing quality Is not clearly after Adobe Acrobat 8.1.2 Professional updating.
To previously there was not a problem to printing quality.
Like this problem gets why?
--- System
OS : Mac OS X 10.5.2 Leopard
App : Adobe Reader 8.1.2
Printer : HP Deskjet 9800 (Driver : HP web download v9.7 lastest or Leopard include)
App : Preview.app (Leopard Default Viewer) - Printng quality is good. But is not the Adobe Reader.
Adobe Acrobat 8.1.2 Professional update : 2008-02-20 (Korea)

Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik

LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Hi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a®

Note 916654 - LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

SAP Tutor output file not saved after recording

Hi,
we are having the following issue when trying to create SAP Tutor files.
The Application which should be recorded with the SAP Tutor is running and selected in the running applications window. During the recording session a sim file is created, but as soon as the recording is stopped the sim file is gone. There are no error messages or warnings. We are following the discription found here:
http://help.sap.com/download/documentation/additional/saptutor/saptutor14_en.pdf
The created sim file just disappears after ending the recording with the "stop" button - why?
Thanks for your help!

What OS is running on your PC? I'm having the same issue with a Windows 7 PC, but not with a Windows XP PC.
What I think is happening is that after you hit "Stop" there's a process called "iTutorCleanup" that's run to post-process the .sim file. On a Windows XP machine I can see this running, and I end up with a working .sim file afterwards. I suspect on a Windows 7 PC this cleanup process is failing and that is why the .sim file disappears.
I'm still playing with compatibility mode settings, but haven't found anything yet that makes it all work. If anyone has any suggestions I'd be very grateful!
Thanks,
Steve.

Error 15: file not found after comp tune X install

downloaded comptuneX on mid 2010 27in imac to enlarge my bootcamp partition with windows 7. Now when trying to boot into windows I get,
Error: file not found...then pressing any key takes me to a RED SCREEN labeled at the top grub4dos, with a menu of options which don't work to do anything I understand. Can someone please help?
Thanks

downloaded comptuneX on mid 2010 27in imac to enlarge my bootcamp partition with windows 7. Now when trying to boot into windows I get,
Error: file not found...then pressing any key takes me to a RED SCREEN labeled at the top grub4dos, with a menu of options which don't work to do anything I understand. Can someone please help?
Thanks

File not found after restart

Hello,
We have a web application that reads in a .ini file. This works great. But, when we have to restart tomcat (for example after the database has been restarted) sometimes tomcat throws a file not found exception for that file. The only way to get rid of that exception is removing the deployed diurectory of the web application and start tomcat again so it deploys the the application again. The .ini file doesn't leave its place and is always there.
Kind regards,
Martijn

Hi,
MPRyan1173 wrote:
Wouldn't it have timeout reset with a server restart and computer restart?
yes, Application scope resets on coldfusion server or computer restart.

Pricing errors are not cleared after fixing the master data

Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
Maddy

Hi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy

[SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

Hello,
I backed up my Arch Install which is one root partition covering the entire SDD with Clonezilla, to play around with Gentoo and FreeBSD on my Laptop.
Now I restored the image and when GRUB 2 loads I see "error: file not found" three times for a short momemt before I'm in the GRUB 2 menu.
When I boot my I also see these 3 messages (probably the once from the early loading process) and "Loading Linux ck kernel...." "Loading initrafms...." "Press any key to continue..." When I wait for a short time or press enter it boots like expected (fsck message appears for a short time since I'm using quite boot and I'm in KDM after that).
Grub loading...
error: file not found
error: file not found
error: file not found
Loading Linux ck kernel...
Loading initramfs...
Press any key to continue...
I did not have this when I backed it up. It booted into the menu and when I booted the menu entry it would go black to show me the fsck message and seconds later I was in KDM.
I tried $ sudo grub-mkconfig but it did not change anything.
This is my current /boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux ck kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux ck kernel ...'
linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-ck.img
menuentry 'Arch GNU/Linux, with Linux ck kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux ck kernel ...'
linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-ck-fallback.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
Anyone has a clue what files it is looking for? And why it doesn't boot straight away, when there is nothing that keeps it from booting up normal anyway?
Last edited by blackout23 (2013-03-21 16:16:59)

the.ridikulus.rat wrote:Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.
I think I'm already on Grub 2.0.0 otherwise I wouldn't have this cryptic menu configuration file.
local/grub-bios 2.00-1
GNU GRand Unified Bootloader - i386 PC BIOS Modules
local/grub-common 2.00-1
GNU GRand Unified Bootloader - Utilities and Common Files

Ipad speakers not clear after ios 7 update!

i update my ipad 2 wifi to ios 7 on sep. 18..... and after that update my ipad speakers are not clear at all....pls help.... will rate it for sure........any help will be appreciated!

I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
Usually those things fixes it. If not, then it could be the port.

SWF File not working after upload to server, but works on local system

HELP PLEASE.....I have created a Fla and exported a swf file
from Flash 8 and Export (Flash 6). I can preview the page in
Dreamweaver just fine, but when i upload it and the html file, it
isn't showing up. It leaves a blank spot on the page. It is just a
simple banner with graphic clips and motion tween text, with image
bgd. All images are jpg.
I have tried:
1. Using a full link to the swf file.
2. Removed drop-shodows in swf file
3. convert to Flash mx 2004 file
4. Exported to higher Flash version to see if the flash
player was an issue.
5. Exported with no dashes in name
6. Added Scr file into Dreamweaver
7. Made a new test file to see if it was something in the
current html doc, same result.
8. Tried viewing on a pc, same result. Created on mac.
Here is the test page if anyone wants to take a look.
THANKS FOR ANY ADVISE.
Test
Page Link

The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.

Re: SAP Tutor output file not saved after recording

Hi,
we are having the following issue when trying to create SAP Tutor files.
The Application which should be recorded with the SAP Tutor is running and selected in the running applications window. During the recording session a sim file is created, but as soon as the recording is stopped the sim file is gone. There are no error messages or warnings.
The created sim file just disappears after ending the recording with the "stop" button - why?
Thanks in advance!
Regards,
Sampath.

Hi,
Go to Start --> regedit -->HKEY_LOCAL_MACHINE -->Software -->SAP -->smi tutor, Delete this smi tutor folder completely and also delete SAP Tutor folder inside program files. Then restart the system and again install the SAP TUTOR freshly and check it will work fine.
Regards,
Sampath.

.download files not clearing after download

Similar Messages

Maybe you are looking for