Download for AP Extreme running Snow Leopard ?

I'm currently running Tiger 10.4.x ready to upgrade to Snow soon. I have the latest software for Tiger and AP Extreme. Does anyone know if my AP Extreme will be ready to work once I upgrade to Snow ?
I checked the Apple site to see if there are any downloads for the AP Extreme for Snow but did not see anything. I just want to make sure after the upgrade --- AP Extreme works.
Thanks,
Bob

Snow Leopard is compatible with both the older 802.11b/g & 802.11n versions of the AirPort Extreme Base Station (AEBS). Included with the Snow Leopard OS is the necessary software (AirPort Utility, Bonjour, etc.) to be able to both access & administer these base stations. I would only suggest that you upgrade your Extreme to the latest firmware available specific to the model that you have.

Similar Messages

  • Cannot access safe boot for Mac Air running Snow Leopard any suggestion please?

    Mac Air - Mid 2011 (79gig free space). Running Snow Leopard 10.6 + all updates installed to-date. Last update was iTunes 98m file which was installed 4 days ago.
    Unit has progressively slowed up, starting with intermittent freezing of cursor, which appears to have started not long after connecting iPhone 5 running current iOS.
    Have accessed Safe Boot and ran drive utility check, all ok.
    Received error message after drive check stating, "(AppleUsbEthernetHost.text) incorrectly installed".
    Have subsequently tried accessing Safe Boot again to try and reset permissions, but can not access as unit constantly freezes at Login page.
    Have followed Apple support recommendations to access Safe Boot, but to no avail.
    Have seen forum references to the above error relating to iOS mobile devices causing problems with earlier versions of iTunes updates. 
    Any suggestions as to how to proceed from here would be appreciated ?
    Ivy

    I suggest you backup your files, if possible, then do the following:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstall your third-party software from the original media. Restore your data from the backup.

  • TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

    Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
    There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

    I suspect it has to do with not having a more current operating system
    Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
    What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
    http://roaringapps.com/apps:table
    Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
    A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
    Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
    Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
    Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
    So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
    Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
    But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
    Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

  • How do I install OS 10.7 NOT 10.7.5 on a mac running Snow Leopard 6.8  i.e. where can I find the original install app for Lion OS 10.7.0?

    I'm running 10.6.8 Snow Leopard fine on my MacPro1,1, Dual-Core Intel Xeon, 2.66 GHz  Mac, but I need to install Lion 10.7.0 to run a program I need.How do I install OS 10.7 NOT 10.7.5, because I get this message when I try to install 10.7.5, which I've downloaded:"This update requires Mac OS X version 10.7." on a mac running Snow Leopard 10.6.8, So i need to install the original 10.7.0 over the 10.6.8  i.e. where can I find the original install app for Lion OS 10.7.0? The original Lion 10.7. is not avaialable for purchase from the App store or anywhere,  even C-Net . Where can I find it to purchase?
    Also it seems I cannot install Mountain Lion over 10.6.8 as advertised. When I go to purchase I get this message: "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer."   I think my computer can handle it (specs above) Are there any workarounds to this?

    If you're getting a "This update requires Mac OS X version 10.7" message, than you have the updater and not the full installer. Go to your Purchases section of the Mac App Store and you should see the full version there. But it may be 10.7.5, though in my system is shows as being from 2011 which would appear to be the original version.
    As to Mountain Lion, that's supported only on the Early 2008 Mac Pro or newer.
    Regards.

  • Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?

    Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?

    10.7.x or newer is the system requirement for CC:
    http://helpx.adobe.com/photoshop/system-requirements.html

  • I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?

    I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
    I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?

    Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
    Next remove your Snow Leopard DVD and restart your iMac into OSX.
    Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
    Use Time Machine to make a Full Backup of your Macintosh HD.
    Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
    Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
    Shut Down and Boot back into OSX.
    Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
    Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
    Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
    Which version of Windows do you already have installed on the existing Boot Camp Partition?
    Is it 32 bit or 64 bit?

  • PSE 8 for Mac won't Install; running Snow Leopard 10.6.2

    Hi,
    When PSE 8 was released for the Mac, I bought a copy from Amazon.  I am running Snow Leopard 10.6.2 on two 24" iMacs and one MBP 15.3.  The Adobe installer would hang about three quarters through the installation.  I'm running PSE 6 for Mac without a problem.  I returned the software to Amazon without a problem.
    A month or two later I downloaded a trial version from Adobe's web site thinking perhaps the DVD I had gotten from Amazon was possibly defective.  Nope.  Same problem trying the trial version.  It just hung about three quarters through the install on all three machines.
    I'm running Photoshop Extended CS 3 with Snow Leopard and have no problems.
    What gives?
    Thanks,
    Linnie K

    Hi,
    I wouldn't know.  The first copy I bought from Amazon and returned.  The second one was downloaded from your web site as a trial and I removed all the bits and pieces after killing an hour with the installer.  I didn't think I could download the trial version a second time.
    I'm using a Mac with Snow Leopard 10.6.2.  My Photoshop Extended CSS3 and PSE 6 work just fine.  I'm afraid that if I deleted all you had suggested, I would have trouble reinstalling the two apps I just mentioned.  From what I've read on various forums,, Mac users (not all) are still having difficulty installing PSE 8.
    BTW, this is the only app I've had any problem installing on my system.  I deliberately waited for v. 10.6.2 to install the newer OS as there were earlier incompatibilities.
    Thanks,
    Linnie
    [email protected]
    www.youtube.com/user/LinnieK9
    Putting the fun in dysfunctional for more than half a century...

  • I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

    I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

    You stated; " I have been successful with My Power Mac "
    A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
    Does the iMac meet the hardware requirements for Mavericks?
    Allan

  • I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

    I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

    You won't find them until you are in Windows.
    Helps to read even print the guide.
    If you have auto run enabled, which is a security risk, the Apple setup.exe will run.
    Otherwise, just run that.
    Either use your OS X DVD, or use the drivers downloaded by Boot Camp Assistant.
    Two different ways to get them.

  • HT204408 Purchased FaceTime ver 1.0.4 for iMac running Snow Leopard. Now can't activate.

    Purchased FaceTime ver 1.0.4 for iMac running Snow Leopard. Now can't activate.
    Get the message "Could not sign in. Please check your network connection and try again"
    On Apple Support page titled: FaceTime, Game Center, Messages: Toubleshooting sign in issues
    all items in Resolution list are OK, e.g., have an active Internet connection, have a valid Apple ID and verified, etc.

    Thank you for the reply.
    As my father-in-law's MacBook (10.6.8) with FaceTime 1.0.4 is not at hand now, I can not check it for myself right away. 
    But my understanding is :
    (1) FaceTime 1.0.5 update is free for download for the OSX 10.6 users who have already purchased and installed FaceTime 1.0.4 or earlier.
    (2) The OSX 10.6 users who want to start using FaceTime from now, need to purchase the 1.0.5 for $0.99 (just as other OSX 10.6 users did before).
    The latter (2) is because OSX 10.6 does not include FaceTime which was not ready at the time of its release. Due to some accounting regulation, Apple chose to sell the FaceTime to OSX 10.6 users at the mimimum price rather than to add the function afterward for free.
    That means every OSX 10.6 user who wants to use FaceTime has to pay $0.99 at some point of time, but I believe Apple is not so greedy to charge the same software twice to fix its bug.
    I guess the screen shot you posted might be taken either by a non-OSX 10.6 Mac, or by OSX 10.6 Mac without FaceTime installed. If you see the same page by a OSX 10.6 Mac with FaceTime alreay installed, it will look diffrently.
    Anyway, I may be wrong, but I will check it with my father-in-laws' MacBook hopefully this afternoon.

  • I have bought OS X Lion 1.7 in august 2011 in Apple Store but I never installed (I had download in pause). I have tried to complete download but Lion 1.7 is not in disposable in Italian Store. How is possible for me update my Snow Leopard?

    I have bought OS X Lion 1.7 in Apple Store on august 2011 but I never installed it (I had download in pause). To day I have tried to complete download but Lion 1.7 is not more disposable in Italian Store. How is possible update my Snow Leopard to Lion or (better) Mountain Lion?

    Ciao Giampo,
    As you're running Snow Leopard and you have a MacBook Pro Core 2 Duo, you CAN upgrade directly to Mountain Lion so long as you have at least 2GB of Memory and 7GB of available space on your hard drive.  So, once you check that your MacBook Pro meets these requirements you can download Mountain Lion from the App Store.
    I'm not sure, but I think you will have to pay €15.99 for the upgrade even though you never managed to completely download your upgrade to Lion.
    Tricia

  • How can I download a version of Pages for my computer with Snow Leopard

    How can I download a version of Pages for my old MacBook that can only run Snow Leopard?

    Hi nteo,
    See this Mac knowledge base article.
    Snow Leopard must be at least version 10.6.6 to access the Mac app store. Use Apple menu > About this Mac to determine the version you have installed. Use Software Update to update the OS, if necessary.
    Regards,
    Barry

  • I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

    I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
    I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
    When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
    I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
    Any advice is appreciated.
    Thanks in advance.

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

    I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

    mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
    Not sure where these hard disk folders are located that you are referring to?  Finder, Finder tool bar, Finder side bar, Desktop, Dock? 
    More then likely they are  an alias that not longer point to the orginals,  thus the question mark.
    I would reboot.  Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

  • I have lost my installation disk for my mac book pro running Snow Leopard 10.6." Where can I replace it?"

    I have lost my installation disk for my mac book pro running Snow Leopard 10.6." Where can I replace it?"

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

Maybe you are looking for

  • How to retrieve Business Partners Per Target group

    Hi experts!!! I am new to CRM development and i need to find the tables related to the target group. So far i have only found some tables that hold the T.G. GUID, but i cannot understand how these are connected among them. The requirement i have is t

  • ReadOnly items based on transient attribute - best approach?

    JDev11 question: Do you have any idea how can I make items updatable/readOnly based on transient attribute? Why is there only feature for "Updatable while new"..?It should be updatable based on function. I tried making my coponents disabled based on

  • Lost iPod registered serial number

    I lost my Ipod and it was not under my email but my sons. I put his email and apple I'd but it doesn't work. I registered his iPod with the serial number under my email and apple Id(after his email not working). What else can I do?

  • JMS C API in Solaris SPARC

    Hi Mates , I am trying to use the JMS C API to invoke a JMS queue from a stand alone C code in SOLARIS SPARC 10 . The Weblogic version is 10.0 patch 2 . I am not able to compile the program . I am using the following command to compile CLASSPATH=/web

  • Regarding /SMB40/ package

    Hi abapers, In development client i need to work on Purchase order print ,but in my client there is no /SMB40/ package , i am not finding the corresponding smartform . how to download and access the /SMB40/ package. Regards, MOHD.