Download for Deployment Packages stops on error

Hello,
I'm importing updates for an offline environment and when downloading updates(from a network location) for a deployment package the wizard stops on error when it runs into an update it can't find in the source folder. In SCCM 2007 this was not the behavior,
it would continue to the end and report on the updates it could and couldn't find. Is there a way to make SCCM 2012 continue on errors? Thanks.

No.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

Hello, my copy of Dreamweaver CS4 stopped working, a message appears stating "Licensing for this product stopped working" error 150:30

Hello, my copy of Dreamweaver CS4 stopped working, a message appears stating "Licensing for this product stopped working" error 150:30. I have a license I bought from Adobe directly, and which has always worked fine. Any hints?
I have a new iMac Retina 5K, 27-inch. late 2014 with a 4 GHz Intel Core i7, 32 GB DDR3, Mac OS Yosemite

Hello,
Please try the suggestions in the link below
https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Regards
Vivek

TM stops after 170 KB, TM prepares for ages, TM stops with error

Here's another one:
TM stops after 170 KB, TM prepares for ages, TM stops with error
I've had it all - after some successful backups. Now I can't make any; error messages ("could not complete because an error has occurred" - thank you very much, Apple, for that most helpful explanation).
Apple turns us all into beta testers! Another product that is shipped long before it's ready due to marketing strategies - and customers are the idiots.
I agree: +Don't use TM!+

I had a very similar problem a few months ago. I spent several days troubleshooting it. Try disabling TM and see if the Finder stops freezing. You might need to wait two or three days to find out. Then try disconnecting your external disk drives and see what happens after another two or three days. I traced my problem back to a Western Digital external disk drive, so I contacted Western Digital via their web site. The next day, they emailed me directions on how to update the disk drive's firmware. I did the update and the problem went away.

HT204406 When downloading albums some songs stop with error messages..

Hi, I was trying to download Armin van Buuren "A State of Trance 2011". The individual songs downloaded fine but both continuous dj mixes failed to download, they get right to the end and then stop with error messages. This is the 2nd Armin van Buuren album this has happened to! Please help!
Dave.

The 2nd mix still won't play, it just skips to the next track on the album. In my purchases it says it's downloaded, it just won't seem to play.
It sounds damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you get another -50 on the redownload, perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023"section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Software Update Downloads to Deployment Package Extreamly Slow

Trying to troubleshoot or identify why software updates are downloading so slowly when creating a new deployment package.
I'm thinking this may have to do with the preferred distribution point and prestaged distribution point settings.
We have one Boundary Group for entire site and one distribution point group for the same.
Neither is configured for pre-staged.
It was my understanding that any distribution point in the primary site is already a "preferred distribution point".
Also, prestaged distribution point settings options are not really clear. If neither DP is configured to prestage, which option should be used for distribution settings? Manually Copy content is default, assuming that this might be the issue?
In that by Automatically downloading content when assigned to distribution points is adding that into the process of downloading to the distribution package... where it isn't just downloading to package at source location, but instantly copying to both DPs
in the DP group? This would explain the lag in the process i'm guessing since the "manual copy the content in the package to the distribution point" option would allow the download to the deployment package first, then the second step of sending
to the DP could happen after the fact?
Deployment package Settings:
Distribution Settings
Distribution Priority: Medium
Checked: Distribute the content for this package to preferred distribution points
Prestaged distribution point settings
Automatically download conetn when packages are assigned to distribution points
Jay D

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

The digital signature for this package is incorrect- error itunes install

I won an ipod shuffle at MacWorld Wednesday. I need to update my itunes to 7.02, but keep getting this error after install is attempted:
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
G5 Mac OS X (10.4.8)

Ok..... got no help, but through lots of trial and error found the following. If I download the file my work on a flash dirve it installs fine. Best I can see is it must be some issue with my Netgear router.
Try downloading on another system. File comes in as .dmg and then opens to a .mpkg when all is fine. Mine would never open the enclosing folder.
Best of Luck!
G5 Mac OS X (10.4.8)

How can I fix a "Plugin Container for Firefox has stopped working" error?

Windows 7, Firefox 30
After changing how Firefox handled cookies (changed to forbidding 3rd party cookies, asking permission to set cookies), I rebooted my system, and Firefox would not start - I got the error message in the question. I uninstalled Firefox, and then re-installed, and Firefox ran fine. After some hours, I closed Firefox and rebooted the system, and again, Firefox hangs upon start, and I get the Plugin Container has stopped working error message.
Since Firefox won't work on my Windows desktop, I'm using my Linux desktop to look here for help. The problem details reported are:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 30.0.0.5269
Application Timestamp: 53914233
Fault Module Name: mozalloc.dll
Fault Module Version: 30.0.0.5269
Fault Module Timestamp: 53911393
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Thanks in advance!

plugin-container.exe is crashing repeatedly. The error code is 0x80000003, the faulting module is mozalloc.dll, version 33.0.0.5397, fault address 0x00001425. Hardware acceleration is disabled, and I have disabled all plugins in an attempt to cure the problem (only Acrobat and Flash were enabled, and Flash is up to date).
(Edit) I'm running EMET 4.1 - if this is memory-related might that be significant?
Here are some crashes from the past few hours (many more if you want them)
bp-9f25a45e-4830-4dd9-a54a-c923f2141020 20/10/2014 22:53
a5c758e1-b489-4c72-98f0-954b2790050b 20/10/2014 22:08
b950661f-25d4-4052-872f-6fb7f3dcc03d 20/10/2014 22:02
b4bad77d-bfab-4913-a4ae-6186ead4cdbc 20/10/2014 22:02
2e970550-11e7-4ed0-8ad6-58025495263e 20/10/2014 22:02
fe4c4f7e-5d0e-4acd-ade7-73d2bd505e04 20/10/2014 22:02
4f83309d-1792-4cef-8f0d-b0465e0c4c39 20/10/2014 22:02
57f40624-b424-4181-ab93-0f37fa4188f6 20/10/2014 22:01
3694a431-a1ac-4077-8019-7e59a1595495 20/10/2014 22:01
cdeafebe-5444-4041-8517-e077c414d2df 20/10/2014 21:52
18ae849e-2c17-4ee0-91bc-57bf4895e697 20/10/2014 21:52
eec36b4b-9f8e-4a73-9e27-d71b21c5011c 20/10/2014 21:19
d98ba06e-eb89-41f7-86ee-517f410a342f 20/10/2014 21:17
1ffb43bf-6750-4629-a2aa-2f0ad39da9ea 20/10/2014 21:09
cc0ab618-e918-4fd7-ba52-bf01aadc5a3e 20/10/2014 21:09
8829fe23-9fd0-4826-89cf-a3e9fd860c56 20/10/2014 21:08
e2d6dc1a-41a0-48cb-b7b0-81d4ef787bbd 20/10/2014 11:51
a266ba42-fc1c-4204-9f1b-289f2b99c451 20/10/2014 11:51
a586d4c0-2102-4c80-a73f-b977000b46dd 20/10/2014 11:51
a64d9089-3f91-4504-bcad-122bfd0a01e9 20/10/2014 11:50
caedc737-d9dd-4bfb-83fd-400ac5a6af6a 20/10/2014 11:50
1a56651a-d096-45a5-9afa-e6c0c822d892 20/10/2014 11:38
71f07b05-8310-4f1d-b5e9-70a514e8a43e 20/10/2014 11:38
2de8971d-d1cf-4077-bac0-be405dd76ff5 20/10/2014 11:38
9ffe41cc-844b-4b93-b172-28154eabfc0c 20/10/2014 11:38
bf95a7d3-0e08-485d-84e9-3638a749244b 20/10/2014 11:38
061112b6-e919-4e87-a815-6c137a48d375 20/10/2014 11:38
1d8ebe85-a5a3-4120-920a-0556be7524c8 20/10/2014 11:38
b0fcb220-1515-4c94-8d35-c65c4cb7743c 20/10/2014 11:38
07430c7b-2424-4f90-8a0d-fb90d3c829f3 20/10/2014 11:38
99b8b695-995f-4bce-a879-8bd0e89cd296 20/10/2014 11:26
d01187a9-bb0a-4bc8-b6fe-9669b5a2d858 20/10/2014 11:26
9b650499-6ac1-42c8-9a92-f762d61deafd 20/10/2014 11:26
ec6044dd-8940-4f6e-8e97-94c23213a973 20/10/2014 11:26
a08bb60e-f686-4417-b5ce-3e736c9ed625 20/10/2014 01:15
4eb90c2b-f9ed-4952-b8e9-71fffe7ecf64 20/10/2014 01:14
03642f9d-09ea-46ea-b66d-62dee98a20fe 20/10/2014 01:14
4cd20689-ad73-4371-88c6-d80f4ed95313 20/10/2014 01:13
c72ee7ad-389a-4a14-a5cf-539765e707c4 19/10/2014 21:08
8593221b-8024-45c0-a07b-85dcf5bc9035 19/10/2014 21:07
32a5c4d7-dad9-4fc2-b31e-716881e4cefe 19/10/2014 21:07
d46d8d27-f26e-488c-ab89-5f029d139246 19/10/2014 21:07
da22093e-970d-4724-b074-2ae494745e0b 19/10/2014 20:46
3ca99f2a-0138-4403-81fa-e4245ff9a7db 19/10/2014 20:45
c7252857-d6bb-4c0d-95e5-83f1fd9bf175 19/10/2014 20:45
87c7b0a9-a2b5-4c98-9953-cf684c15f3d5 19/10/2014 20:44
c60f13f8-18b5-42b6-9b02-810cb5a77347 19/10/2014 20:44
188ba801-1616-4048-a941-b60126788efe 19/10/2014 20:44
1c3d4f1e-c3be-469a-a348-5e93d1443bae 19/10/2014 20:44
852bf33f-d3b2-40d3-820e-aea7e1c367da 19/10/2014 20:20
d5cda65a-4fa7-4f9e-b5a0-bacfb1bfcebd 19/10/2014 20:20
d6b7137a-d347-4a39-91a6-e0e5f817b71b 19/10/2014 20:20
a031b2f8-cbb0-4fd5-abf1-a557a4021ce7 19/10/2014 20:20
58cf92b6-f4d7-4ab8-98ea-89cc311338df 19/10/2014 20:20
The crashes are intrusive but Firefox itself is not usually affected - so isolating the plugins works as intended.
(I tried creating a separate thread for this but the process stalled at Stage 3)

Win 8.1 deployment suddenly stops - No Errors

Hello,
I have read the other posts and have done google research but can't see why deployment stops in the middle with no error.
-This is using OSD to a VM using Workstation 10
-This seems to be happening right after image is applied the machine restarts and devices should be installed but it comes to a logon screen with local accounts(i created) other than "administrator" available to login with.
-This has been a hit and miss. I have built reference images using VM's. When deploying the BDD.log shows that the image is applied by LTIApply and then OS restarts and comes to a login screen and stops. At times the process does work though and goes to
the next step.
-When it does process fine the next steps are for "Getting Devices Ready".
-I have had most success with building a reference image configuring it taking snapshot capturing and then deploying the image.
-At times when I have reverted back to a certain snapshot, made changes and did another capture the deployment process fails as mentioned. I don't think it is the capture though as capture completes with no errors.
If anyone has pointers, please advise. I can attach the logs if need be. Thanks.

Hi MrBrooks, here is my unattend.xml Thanks.
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
<InstallFrom>
<Path>.\Operating Systems\Windows 8.1 Pro RBA DEI3\REFW81PRO-DEI3-001.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
<ProductKey>
<Key></Key>
</ProductKey>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username></Username>
<Domain></Domain>
<Password></Password>
</Credentials>
<JoinDomain></JoinDomain>
<JoinWorkgroup></JoinWorkgroup>
<MachineObjectOU></MachineObjectOU>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName></ComputerName>
<ProductKey></ProductKey>
<RegisteredOrganization></RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
<TimeZone>Pacific Standard Time</TimeZone>
<CopyProfile>true</CopyProfile>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page></Home_Page>
<DisableWelcomePage>true</DisableWelcomePage>
<DisableFirstRunWizard>false</DisableFirstRunWizard>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>UABAAHMAcwB3ADAAcgBkAEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value>UABAAHMAcwB3ADAAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</Password>
<LogonCount>10</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
</OOBE>
<RegisteredOrganization></RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<TimeZone></TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog://hqvpwwds01/mdtproduction$/operating systems/windows 8.1 pro rba dei3/refw81pro-dei3-001_cap_w8prox64-001cdrive.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

TechComm2: 9004 error for FM and 'stopped working' error for RH8

I have been running the demo versions of FM9 and RH8 under Windows 7 for three weeks with no problems - for no apparent reason both apps stopped working this afternoon.
'Internal Error 9004, 6919244, 9675646, 0. FrameMaker has detected a serious problem and must quit.' error at the Localization phase when launching FM.
'Adobe RoboHelp 8 has stopped working' at the Loading Components phase when launching RoboHelp.
I uninstalled and reinstalled the applications with no change.
Any ideas?
Coincidentally, I purchased and registered the TechCommSuite 2 upgrade this morning, about two hours before this mess started. I have a documentation and Online Help project due today - what a mess.

Pieter,
Simply navigate to c:\users\your name\AppData\Roaming\Adobe and rename the 'Linguistics' folder (Framemaker should NOT be running - otherwise, the folder will be write locked and unable to be modified). As a precaution against doing more damage to my installation I renamed the 'Linguistics' folder instead of deleting the folder (for example, Linguistics.bak). When Framemaker opened it automatically recreated the 'Linguistics' folder as well as the dictionaries, at which point I deleted 'Linguistics.bak'. Since then I have had no problems. By the way, I am running Windows 7; if you are running a pre-Vista version of the OS you will find your 'user' folder under c:\documents & settings. Good Luck.
Thomas

Does anyone have a fix for "iTunes has stopped working" error, using Vista?

When I try to start up iTunes I get an error message "iTunes has stopped working" and I have to close the program. I have performed a complete uninstall of all things Apple and reinstalled iTunes but no joy.

Did you after uninstalling iTunes (and before reinstalling) checked if the following directories where also deleted ?
(These directories store your iTunes and also other Apple Products settings...)
For XP:
Documents And Settings\All Users\Application Data\Apple Computer
Documents And Settings\All Users\Application Data\Apple
Documents And Settings\<user>\Application Data\Apple Computer
Documents And Settings\<user>\Application Data\Apple
For Vista:
Users\Public\Apple Computer
Users\Public\Apple
Users\<user>\AppData\Roaming\Apple Computer
Users\<user>\AppData\Roaming\Apple
Note: Deleting these directories also deletes the settings for other Apple Programs
Ps: Always make a backup before deleting.

I am running Ubuntu 10.10 with Firefox 3.6. Tried to install a video downloader for youtube. I get error -228 for all plugins tried. I have followed the trouble shooter and software installation is allowed, and cache is 50MB and enabled. Any suggestions?

Firefox version 3.6.10

I followed to the link to the article:
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
And went to "error -228" and followed this instruction>
"On Linux, this error can be caused by IPv6. To disable IPv6, go to about:config and find the preference network.dns.disableIPv6, then right-click on it and toggle it to true. This change will require a restart of Firefox. "
This fixed the problem and I can download plugins and extensions without difficulty.
Thanks.
Richard9

Where can ESRs be downloaded for deployment into CE 7.1 EHP1

I am trying to add the ESRs below to CE 7.1 EHP1 Developer Edition, but I cannot find the 3 source files anywhere.
SAPXIESR01_0.SCA
SAPXIGUI01_0.SCA
XICNTSAPBASIS01_0.SCA
Previously, they were included in the location below:
CE711SP1_SDN-Preview\Additional\ESR_SCAs
But in the CE + NWDS archive files that are now available for download on SDN, the "Additional" subfolder is no longer available.
The source files that I have downloaded are:
- CE711SP1_IDE_SDN-Preview.rar
- SDN_Preview_SR_5_CE71
and also:
- SDN_Preview_SR_5_IDECE71
Is there anywhere else that I can download these three ESR .SCA files from? Or will these files no longer be available for download.
I am not sure whether my next point is linked to the original question, but also when in NWA, I have no option listed in the Configuration Wizard to "Initial setup of functional unit SLD entry". Is there any reason why this is unavailable? e.g. are the ESRs needed for this to be shown?
Many thanks in advance,
Ali Crawshaw

Hi
Might it be removed from free download , you can take it from SAP Market Place.
To find out the "Initial setup of functional unit SLD entry" , login with admin id and select the admion tool, among listed option one of the option for this .
BR
Satish Kumar

HT1212 ipad disabled it syncs sand starts download for update but stops and says network connection timed out. its not 3g cant use find iphone

trying to unlock sons disabled ipad mini cant use find iphone not 3g and wont connect internet when disabled syncs to itunes whenusing never synced method
asks if i want to update and restore download starts and then message syas network connection timed out. any ideas on another method i can update after unlocked and restore all his stuff from icloud

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Form recompilation for changed packages

hi all,
I wanted to know when (under what all possible conditions)is a form recompilation required for changed packages.
regards,
Rajiv

The error says: "identifier 'po_approve_c1.forward_check' must be declared".
The note 747508.1 provides a call to a procedure defined in CUSTOM.pll library. In my case the logic resides in POXAPAPC.pll which is PO specific.

Why can't I access the download for mobile Firefox?

I have a Motorola Bravo MB520 with Android 2.1.1 (I've only had it a few weeks and it is new). The phone is rooted. When I go to the firefox.com/m/beta in my phone's browser and click the "download for Android" I get an error message "Not found" "the requested item could not be found." I would really like to test the beta out as I am a devoted user and proponent of Firefox!

Firefox will not appear in the Market for most phones with incompatible hardware. I believe the Motorola Bravo is supported. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
On some supported devices, a bug prevents Firefox from appearing in the Market. This may be related to the recent Market update. You can go to Settings/Applications and uninstall the Market update, then find and install Firefox.
Or, you can download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on how to "sideload" the APK file, since AT&T disables the option to install from non-Market sources.)

Download for Deployment Packages stops on error

Similar Messages

Maybe you are looking for