Download helper add-on no longer works after update of firefox, what has changed?

After I updated Firefox to 18.0.02 the download helper stopped working on 98% of the websites I watch TV programs on. What has changed and will it be returned to its previous condition?
The website I go to is: http://www.free-tv-video-online.me/internet/

Are you using an add-on as a download helper?

Similar Messages

HELP! iPod no longer works after update

I've been using my 20gb clickwheel ipod without incident for a year now, my last update had been iTunes 5 and hadn't updated my iPod recently either (why bother..it worked fine?).
I wanted to purchase music from the iTunes music store, but it wouldn't let me unless I upgraded to iTunes 6 and updated my iPod. OK - so I did that- upgraded iTunes to 6.0.1 and updated tghe iPod using the latest updated dated 2005-10-12. Then the horror begins.
On the first attempted synch post update - my iPod screen turned into a folder/exclamation point icon and stopped working. I tried resetting by holding down the center button and menu..it restarted and went back to the same folder/exclamation point icon. No luck.
I've tried restoring it repeatedly and then synching my library back to the now clean and restored iPod and it stops synching at different points and crashes (after 31 songs - crash iTunes - iPod freezes on the "Do not disconnect" screen - strange clicking noise - restore - try again - 58 songs...same... restore ..again...45 songs.. you get the picture).
It worked fine BEFORE the update except I couldn't purchase music. There has been NO change except installing the updates (it hasn't been jostled, dropped or anything). What can I do? The update killed my iPod?!!!! I am at my wits end!!!!!!
-Tory

OK..I've tried many things and my iPod is still hosed after updating. I upgraded my Mac to Tiger. I was told that the there might be some issues with synching using firewire with the new update - so I bought a USB cable and tried synching with that.
I have the same issue as before. I can restore the iPod, but when I start synching my music from Itunes back to the blank, restored iPod - it synches up anywhere from 20-200 songs and then freezes (spinning beach ball on one song halfway synched for an hour - then force quit iTunes - and start all over again: restore, synch, crash).
You know, I got burned by the 1st generation 5gb iPod battery issue, then the headphone jack stopped working on my 2nd generation, now my monochrome clickwheel iPod freaks out after Apple forces me to update so I can get my paid music back (it removed, yes, REMOVED my purchased songs because I was still using an older version of iTunes - when I updated to 6 I got them back - how Microsoft is THAT?).
I am really losing my faith in Apple's ability to make a quality product.I am despondent. If anyone has any advice - I would be most grateful...

Sync no longer works after update to Firefox 29

After my desktop Firefox automatically updated to version 29,
I can no longer see "tabs from other computers".
Not my Firefox at work (updated by administrator after extensive reviews),
not my Firefox for Android (updated via Android Market),
not my Firefox on my Macbook (version 28),
not my Firefox on my Linux and Windows machines.
Note: Updating all firefox instances on the sync account at the same time is NOT an option.
Especially since not all of them are administred by me.

"The new version of Sync only works with the latest Firefox and you can't use both the old and new Sync at the same time. "
I don't want any new sync.
I want the old sync that works with all the clients I have,
that I have no power to update myself!
This is a very common situation after all.
"While the old version of Sync will continue to work..."
...aparently not. That browser never asked to update to any new version of Weave/Sync, so it should still be on the old one.

Hdmi connection to tv no longer works after update to mavericks what can I do?

My HDMI cord is attached an works fine. I upgraded to Mavericks and the display came up on my TV. Now today it won't come up. I rebooted and no better! Any suggestions?

Hi BBruins11,
If you are having issues with an external HDMI display after a recent upgrade to Mavericks, you may find the troubleshooting steps outlined in the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

BlackBerry Classic front camera no longer works after update

The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

Hi,
the Classic was shipped already with 10.3
What 10.3 version do you mean exactly?
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Firefox no longer working after update to 19.0.2

Firefox no longer works after auto update to 19.0.2

Hello vinaysingh, check if your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) preventing Firefox from connecting to the Internet.
see for more info : [https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating#os=win7&browser=fx19 Fix problems connecting to websites after updating Firefox]
thank you

I am running Firefox 12.0. Win 7 home premium 64 bit. Suddenly after upgrading to ver 12.0 my download helper 4.9.no longer works What's the fix?

I'm running win 7 64 bit and have been using download helper for several years. It is up to date.ver 4.9.9 Suddenly, when I choose download a video, it seems to work sudden flashes on screen to include the default setting to convert flv to mp4, but the downloaded file is tiny and does NOT work. it remains in flv format and the "failed to conv" is added to the file name

I RESOLVED THE ISSUE. I uninstalled the converter. Re installed after a cold boot.
The sites that would not load properly: I did a ixquick search of the titles that wouldn't download and found them at another location. They then downloaded perfectly. from the new location

Add On for Orbit Downloader is not working after update to Firefox 6.0. It was working in the last version.

I have updated to Firefox 6.0 and Orbit Downloader Plugin is not working.

Forgot what I originally wanted to post.
Just for the record, Firefox V:8 and Orbit don't play together, either.
I would start a separate thread for that if I thought anyone would actually try to fix the problem, but it is clear Firefox is doing this on purpose, for some reason.

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Red Giant Trapcode plugins no longer work after updating to Premiere Pro CC 2014.1 (v8.1)

I'm not sure why but after updating Premiere Pro CC to 2014.1 none of my previously installed Trapcode plugins work. I tried uninstalling Trapcode and then re-installing the latest Trapcode update (12.1.6) but it didn't fix the problem. I'm also running Windows 8.1.
I checked the plugin loading log file (\AppData\Roaming\Adobe\Premiere Pro\8.0\Plugin Loading.log) and noticed all the Trapcode plugins had the message "The plugin is marked as Ignore, so it will not be loaded."
So to fix it, I had to manually modify the registry and change "Ignore"=dword:00000001 to "Ignore"=dword:00000000 for most instances of my Red Giant plugins. Everything works now.
Here's all the ones I had to modify:
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\3DStroke.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\HairLines.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\LightFactoryLERender-64.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\LightFactorySpectactularRender-64.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RadiumGlow.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RadiumGlowEdge.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RadiumGlowLite.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGCornerPin.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGReflection.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGSGrowBounds.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGShadow.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Screen Text.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Shine.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Smooth Tiler.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Starglow.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Grid.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Hacker.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Matrix.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Spiral.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Blacklight Edges.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Goth.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Heat Vision.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Outlines Only.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Roto Toon.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\TypeOn.aex]
"Ignore"=dword:00000000
-Pete

First ... have you checked that these are all updated to work with the CC versions? I'd check with the makers of each plugin, the software has MANY differences.
Next ... if say you removed all but one, do any of them work? It might be worthwhile to remove them from the folder, then add one by one until you find one that is crashing things. That would at least get you part way forward.
And ... you might list which ones you have, in what versions. Folks around here might be able to help just seeing that.
Neil

PgUp/PgDn no longer work after upgrading to Firefox 4

I just upgraded from Firefox 3.6 to 4.0., and now the PgUp/PgDn keys (page up/page down) no longer work. Or rather, they act as though caret browsing (F7) is turned on, which it is not. (In caret browsing, PgUp is like the back button and PgDn is like the forward button.) To confirm that caret browsing is off, I've hit F7 and clicked No (multiple times), and also checked about:config, which shows that accessibility.browsewithcaret is false.
More info: (1) Options > Advanced > General > Always use the cursor keys to navigate within pages is unchecked, (2) the PgUp/PgDn keys also don't work when Firefox is restarted in Safe Mode, (3) they don't work on any webpage, (4) they do work correctly in other applications (Microsoft Word, etc.), (5) my operating system is Windows 7 Home Premium (64-bit), and (6) I run Microsoft Security Essentials (antivirus software).
Any ideas?
Could this be a bug? If so, what is the procedure for uninstalling Firefox 4 and returning to Firefox 3.6 -- without losing my bookmarks, add-ons, etc.?
Thanks!

dmtf2010 nailed the problem here (https://bugzilla.mozilla.org/show_bug.cgi?id=640587#c48):
So, the solution is:
1. Go to about:config
2. Find ui.elantech_gesture_hacks.enabled
3. Change its value from -1 to 0
4. Restart FF
5. If you run into a bug that option was designed to fix (non-working page swipe gestures), install the latest Elantech driver (http://www.techspot.com/drivers/driver/file/information/14513/) and reboot.
I've tried his solution and, so far, so good. :)

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

Airplay no longer working after updates

After updating ATV3 and IOS devices; namely iPhone 5 and iPad 2 the airplay icon is no longer available. MBP similarly no longer has the airplay icon so mirroring is not possible. Can anyone help with a fix?

Welcome to the Apple Community.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

Import form cam no longer works after Update to iLife 09

Hi, I've updated to iLife 09 and installed the most recent patches. With iLife 08 my Fujifilm Finepix F30 was recognized by my mac book pro, iPhoto starded up an the contet of the cam was presented for import as soon as I connected it by USB. With iLife 09 all this no longer works. iPhote is fired up but nothing else happens but that iPhote freezes so the only thin I an do is to kill it ... now it's more or less useless for me
Please help !
TIA
frantek

Start with the troubleshooting basics:
1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
2. Repair Permissions using Disk Utility
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Download helper add-on no longer works after update of firefox, what has changed?

Similar Messages

Maybe you are looking for