Download/Install Calendar server separately

Hi,
I am interested to download the calendar server installation as a separate component and install alone. Is it possible? Does Calendar server has any dependencies e.g. pre-existing LDAP etc.
Thanks in advance for help and resposnes.
Regards,
-Amitabh

As others have said, it can indeed be installed standalone. That's how we're using it.
How to do that is described in the Oracle Collaboration Suite installation guide for your
platform. There's a special chapter devoted to installing the Calendar standalone. You can find all the documentation on Oracle's site. I would start here
http://www.oracle.com/technology/documentation/collab.html
I don't believe it's possible to download just the calendar component, though. I think you're stuck downloading the entire OCS suite.
Tim

Similar Messages

Can I install Calendar Server on another partition other than root file system

Can I install Calendar Server on another partition other than / ?

In this version, the default path is hard coded to install in
/users/unison. However, if you do not have enough room on your root
partition or choose to install it in another location, you can do so
using a logical link. The installation guide explains this as well.

For example, suppose you want /users/unison, which must NOT already
exist, to be logically linked to /var/opt/unison, which must exist.
Then as root user:

<UL>
<LI>
Create the directory /users (if it does not already exist)

% mkdir /users

<LI>
Create the logical link. The directory /users/unison must
NOT exist before doing this.

% ln -s /var/opt/unison /users/unison
</UL>



makes a lot of sense. I am looking for an answer myself. My documents folder long ago outgrew it's place on the boot drive. It would be nice to keep it in the user folder organized on another disc

Do you have to install Calendar Server as user unison?

If I use a different username/group other than unison/dxoffice, installation
will not finish successfully and daemons will not start after ns-setup has
completed and the Calendar instance has been created.

(See attachment)

If I use a different username/group other than unison/dxoffice, installation
will not finish successfully and daemons will not start after ns-setup has
completed and the Calendar instance has been created.

(See attachment)

Cannot install Web Server + Calendar Server

I would like to install calendar server an RH3 to use with Lightning.
So I do ./installer &
I choose calendar server and webserver components.
But, just in the form after I cannot continue because :
Valid DNS Domain Name Required.
The DNS Domain name Provided could not be validated.
The services being installed require a valid internet domain name.
Installation cannot proceed untill a valid DNS Domain Name is provided.
I don't know what to enter in the fill "Name of the DNS domain"
I read the old post with the same issue, I read the General Installation Prerequisites and following :
12. If you are installing a communications product component, verify that the domain name of the host on which Access Manager will be installed is set.
To set the domain name, do one of the following:
If the file /etc/resolv.conf exists, enter the fully qualified domain name in the domain configuration entry. Example: domain mycomputer.company.com
If the file /etc/resolv.conf does not exist, enter the following command syntax:
# domainname fully_qualified_domain_name
13. Verify that the second column in the /etc/hosts file contains the fully-qualified domain name (FQDN) rather than a simple host name. For example:
192.18.99.999 mycomputer.company.com mycomputer loghost
I have severals PC on a domain.
Please, some one can explain me how to complete my installation ? What I need to enter on the hosts file ?
Why the installation needs a Internet domain name ?
Thank you
Emmanuel
Edited by: emmsan on Feb 8, 2008 4:59 AM
Someone knows if I have to install the web Server to make the calendar server functionnal ?
thank you

emmsan wrote:
Maybe can you help me one more time...
I reinstall a new RH3 and start ./install & of the commsuite5
- Directory Server Enterprise Edition 6.0 (it seems to be required too)
include :
* Directory Server 6 Core Server
* Directory Service Control Center
* Directory Server CLI tool
This is the LDAP Server no ???Correct. Directory Server 6.0 is Sun's LDAP compliant server.
BUT for the DNS Domain Name : I cannot find it, how to find this name ?At this juncture I should say that a basic working knowledge of TCP/IP network and DNS is required for this software. LDAP knowledge is also essential since you aren't installing the account provisioning tools (delegated administrator).
this is my etc/hosts :
127.0.0.1 wcap localhost.localdomain localhostwcap is the host nameThe etc/hosts should have an entry along the lines of:
1.2.3.4 wcap.mydomain.com wcapWhere 1.2.3.4 is the IP address of your system and mydomain.com is the domain-name for your system.
this is my etc/resolve.conf
; generated by /sbin/dhclient-scriptYour server is given an IP address via DHCP? That is definitely not a good idea.
What do you get when you run:
nslookup <calendar servers IP address>
I tried to enter abcde for the DNS domain name, but w/o successWhen you run:
nslookup wcap.abcde
=> do you get the IP address of the server returned?
Finally the installation works with these
host name : localhost
DNS domain name : localdomain
IP add : 127.0.0.1
etc..
I hope it will work, for the moment, we need to use the calendar server in our local domain.127.0.0.1 is the loopback address. You shouldn't use this.
Regards,
Shane.

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.

The steps are the same whether you have already upgraded or are about to.

Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, do not
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

Calendar Server Invalid Backend ID Error

Product name: Sun Java System Calendar Server
Build version: 7.0-0.26
Build timestamp: 2009-08-27T04:07:42-0700
Hi,
We have a newly installed calendar server following the 'single host' installation instructions published at the Communications Suite 7 wiki site. Since last week, we have not been able to resolve an exception we are experiencing when trying to test the installation using the Dav Content Browser. The Dav Content Browser does connect and we can see the login/password authentication in the commands.0 logfile. Regardless of what user we specify, we always get back a '404' result and message indicating 'invalid backend id'. We have verified availability of the MySQL database and login/password settings. Below is a summary of the details we see:
Request URI: /davserver/browse/home/mmc001/calendar
Exception Type: com.sun.comms.davserver.services.DavException
HTTP Status: 404
Messages: invalid backend id for:/home/[email protected]/: mmc001
Thanks in advance for your assistance.

Hi Shane,
Thanks for getting back to me. To answer your questions, yes I am now able to use the dav browser using URL http://<FULLY QUALIFIED HOSTNAME>/davserver/browse/home/[email protected]/calendar/ . MMC001 was a temporary ID previously used for calendar testing. Although the above URL works for dav browsing, I have not been able to get Lightning or Evolution working.
When I try to access http://<fully qualified hostname>/davserver/browse/home/h/mobilemailcentral.com/stuart/calendar/ I get prompted for the login/password and see the following in commands.0:
[2010-02-17T08:09:17.333-0500] <27> DavBrowserServlet [REQ] GET /davserver/browse/home/h/mobilemailcentral.com/stuart/calendar/ <IP ADDRESS> <HOSTNAME>
[2010-02-17T08:09:17.337-0500] <27> DavBrowserServlet [RES] [401] Command execution time: 0.0050 secs
[2010-02-17T08:09:24.483-0500] <28> DavBrowserServlet [REQ] GET /davserver/browse/home/h/mobilemailcentral.com/stuart/calendar/ <IP ADDRESS> <HOSTNAME>
[2010-02-17T08:09:24.484-0500] <28> DavBrowserServlet ----- Authentication: [email protected] login_time=0.0 secs,start_service_time=0.0 secs.
[2010-02-17T08:09:24.490-0500] <28> DavBrowserServlet ----- Get /davserver/browse/home/h/mobilemailcentral.com/stuart/calendar/ start.
[2010-02-17T08:09:24.502-0500] <28> DavBrowserServlet [RES] [404] Command execution time: 0.019 secs
Lightning won't connect correctly. I have tried using both 'caldav' and 'ics' settings when creating a remote calendar. Using 'caldav', Lighning's error log returns a DAV_NOT_DAV error and using 'ics' returns:
Error: [Exception... "Component returned failure code: 0x804a0107 [calIICSService.parseICS]" nsresult: "0x804a0107 (<unknown>)" location: "JS frame :: file:///usr/lib/thunderbird/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/components/calItemModule.js -> file:///usr/lib/thunderbird/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/js/calIcsParser.js :: ip_parseString :: line 58" data: no]
Source File: file:///usr/lib/thunderbird/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/components/calItemModule.js -> file:///usr/lib/thunderbird/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/js/calIcsParser.js
Line: 58
Warning: There has been an error reading data for calendar: MMC. Error code: ICS_FILE. Description: [Exception... "Component returned failure code: 0x804a0107 [calIICSService.parseICS]" nsresult: "0x804a0107 (<unknown>)" location: "JS frame :: file:///usr/lib/thunderbird/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/components/calItemModule.js -> file:///usr/lib/thunderbird/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/js/calIcsParser.js :: ip_parseString :: line 58" data: no]
I suspect there is something wrong about the URL I am using, not really sure about this. Any ideas?
Thanks,
Stuart

JES Calendar Server 6.0 session and ssl errors

HI!
I installed Calendar Server 6.0 on my server. When i start CS strange logs generated:
[13/Jan/2004:23:54:17 +0100] balu cshttpd[6669]: General Notice: Sun[tm] ONE Calendar Server 6.0 (built Nov 14 2003) cshttpd
starting up
[13/Jan/2004:23:54:17 +0100] balu cshttpd[6669]: General Notice: cshttpd attempting to open Counters Database
[13/Jan/2004:23:54:17 +0100] balu cshttpd[6669]: General Notice: cshttpd successfully opened the Counters Database
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: HTTP Module is refreshing
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: cshttpd is refreshing
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: cshttpd is refreshed
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: HTTP Module has refreshed
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: cshttpd: argc=8 argv[0]=/usr/JES/CS-6.0/SUNWics5/cal/lib/cs
httpd
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: cshttpd_parse_commandline: successfully bind process 6669 t
o processor 1
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Error: Inherit session ID cache failed for http service [-5949]
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: session_init: attempting to open session database for cshtt
pd
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: session_init: session database open completed for cshttpd
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: LdapCacheInit: Ldap Cache not enabled.
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: cshttpd attempting to open Calendar Database
[13/Jan/2004:23:54:18 +0100] balu cshttpd[6669]: General Notice: cshttpd successfully opened the Calendar Database
[13/Jan/2004:23:54:19 +0100] balu cshttpd[6668]: General Notice: cshttpd is ready
CS is working fine, but i don't understand the session ID problem.
Then i try to use ssl with CS-6, but it don't work.
SSL handshake work fine (=> certificates are correct), user can log in, but the session die. It is thick with garbage (random characters). I don't understand what happens, but here is snapshot: http://bug.sch.bme.hu/error.bmp
And i see the following log on my terminal
Assertion failure: source UTF-8 string is exhausted in XSLString.cpp.
Then i set
service.http.ssl.port.enable = "yes", becouse i want to use SSL only. I restart CS, but it bind to port 80 too. Why? How can i turn off HTTP?
Best regards
Robert

I just copied the conf from SUN manual and then it worked fine - I just have a problem on timeouts (that I posted right now..) I'm pasting here my ssl conf - maybe it could help.
(the http is still running to me also - so I moved it to a non stansard port)
--Yedidia
! SSL conf copied by Yedidia from previous configuration
! 2004JAN04
service.http.ssl.usessl = "yes"
service.http.ssl.enableport = "yes"
service.http.ssl.port = "443"
service.http.ssl.certdb.path = "alias"
service.http.ssl.certdb.password = "*******"
service.http.ssl.securelogin = "yes"
service.http.ssl.securesession = "yes"
service.http.ssl.cert.nickname = "SSLServerCert"
service.http.ssl.ssl3 = "yes"
service.http.ssl.ssl3.ciphers = "rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha"
service.http.ssl.sessiondir.path = "."
service.http.ssl.cachesize = "10000"
service.http.enablesslport = "yes"
service.http.sslport = "443"
service.sslpasswdfile = "config/sslPasswordFile"
local.serverroot = "."
encryption.nscertfile = "alias/cert7.db"
encryption.nskeyfile = "alias/key3.db"
encryption.nssecmodfile = "alias/secmod.db"
encryption.nssslactivation = "on"
encryption.nsssltoken = "internal"
encryption.nssslpersonalityssl = "SSLServerCert"
encryption.nsssl3 = "yes"
encryption.nsssl3Ciphers = "rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha"
encryption.rsa.nssslactivation = "on"
encryption.rsa.nssslpersonalityssl = "SSLServerCert"
encryption.rsa.nsssltoken = "internal"
ics.nssslactivation = "on"
ics.nsssltoken = "internal"
ics.nssslpersonalityssl = "SSLServerCert"
ics.nsssl3 = "yes"
ics.nsssl3Ciphers = "rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha"
! cshttpd will only listen on the SSL Port if "yes" is specified.
service.http.ssl.port.enable = "yes"

Cluster Installation of Calendar Server-RedHat3 ES -JES2005Q4-Fatal error

Hello,
I've installed messaging server and calendar server in cluster mode.
Messaging server works well either calendar on the first node.
On the second node Messaging server works (after shutting down the first node) but I didn't manage to start calendar server.
I don't use Sun Cluster Agent.
I've installed calendar server on the SAN (binaries and config files)
When I start it(on the second node) I have the following error message:
Restarting calendar services
Stopping all calendar services
Starting all calendar services
enpd is started
csnotifyd is started
Fatal error 70: Cannot start Alarm Dispatch thread
csadmind is not started
Calendar service(s) not started
PS: I've read this to help me
http://docs.sun.com/app/docs/doc/819-2433/6n4nlfjmo?q=calendar+server+cluster&a=view
PS2: I've tried to modify the ics.conf file with this but without any success
http://docs.sun.com/source/817-5699/index.html#wp75517
If anybody have a suggestion !
Thanks for your help and sorry for my english
Message was edited by:
aduneo92
Message was edited by:
aduneo92
Message was edited by:
aduneo92

[SOLVED]
Just need a full reinstallation (as usuall ...)

Calendar Server installation gets error "libnmspr20.dll not found"

Calendar Server installation gets error "libnmspr20.dll not found"

When installing Calendar Server 3.5 on NT near the end an error
occurs: "libnmspr20.dll not found " and then it will exit the setup
without completion.
This is a bug because it is looking for the libnmspr20.dll in the
system path but the Calendar Server installation has left it in a
temp directory. This does not occur if the Netscape Messaging Server
has been previously installed on the same host. A workaround is, when
the error message displays, you DON'T press ok, but search your
computer for the missing file (usually found in temp-directory).
You then copy the file to a directory in your system path. Now you
can press the OK button and the installation will fail. Re-install
the calendar server, this time the installation won't fail.

Installing Latest JRE on NT4 sp6a produces the same error:
InstallShield DLL Custom Action:
File 'C:\TEMP\RegUtils.dll' can not be found. Make sure the file is on the target system or installed already.
I searched www.installshield.com since the error is an installer error and the installer is InstallShield. NO results found there either.
Seems like the installer team needs to brush up on the NT4 platform.

Unable to create an instance of the Calendar Server after installation

After installing Calendar Server, I am unable to create an instance of the
Calendar Server. Instead, I receive the following error:

Error: "Authentication Credentials could not be obtained from the
Admin Server"
Check the /users/unison/misc/unison.ini
file, under the
[LDAP] section, to
verify that the correct LDAP host and baseDN are set. The settings
should appear as follows:

[LDAP]
basedn=YourBaseDN
host = YourHostname
port = Port

Hi,
I've got the exact same problem when launching to JDeveloper.
And I've searched on internet for days.
I did try to modify the number of
MaxPermSize in jdev.conf
and
Xmx and Xms in ide.conf
I've tried several combinations, and sometimes it works.
The disappoint fact is that even with the same combination of the settings, sometimes it works and sometimes it doesn't.
Sometimes it just work. Sometimes it doesn't...and after rebooting it works again......Sometimes even rebooting doesn't help.......Sometimes when change MaxPermSize to a smaller number it works...and next time it may not work again....Sometimes you change the MaxPermSize to some other number, save, and then change it back,,,,and it works again...but next time you try to use it, it may not work..........
I don't know what leads to these problems.....anyone could help? Thanks in advance....

Installing Calendar on NT

How do I install Calendar Server on NT?

Running a35eiu.exe

Follow the installation dialog instructions. Use all defaults except
as noted below:
If told that a 3.x server is currently installed on this system, use
the same Destination Directory and Administration Server Port as this
3.x server.

For the Base Distinguished Name, use your Database Subtree.

For the Administration Server Username and Password, use your
SuiteSpot 3.5 Administrator's ID and Password.

Enter a value between 10000 and 20000 for Node-ID.

Use a descriptive Node Alias that is one word.

Select the desired Node Time Zone; this value cannot be changed later,
without reinstalling.

Enter and record (for later use) a SYSOP password.

Make shure U uninstall DS instance which gives this error deleting it from the unistall icon would delete only certain files.But all the files are not deleted so U make shure it's deleted by searching the registry for slapd instance u would find some files which allso cause this sort of error when Ur trying to install a new instance.

How do I install the Calendar Server for UNIX?

In order to install the Netscape Calendar Server for UNIX, please
follow these exact instructions:
o Login as "root".
o Create the group "dxoffice"
o Create the user "unison".
- Please make sure this user has a UID less than 60000.
- Please make it's primary group "dxoffice".
o Edit the /etc/services file and add the entries:
unieng 5730/tcp # Cal Server DB Daemon
unisnc 5731/tcp # Cal Server Real-Time Daemon
o Untar the calendar archive. It should install extract itself to
/users/unison/.
o Change directories to /users/unison/bin.
o Run ncsconfig.
After answering the questions to configure your server you can start
your server by running the command: "unistart".

Hi,
This is from the documentation -
Database: Third Party JDBC Drivers
The Third Party JDBC Drivers pane specifies drivers to be used for connections to third-party (non-Oracle) databases, such as IBM DB2, MySQL, Microsoft SQL Server, or Sybase Adaptive Server. (You do not need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add Entry and select the path for the driver:
For Microsoft SQL Server or Sybase Adaptive Server: jtds-1.2.jar, which is included in the jtds-1.2-dist.zip download
To find a specific third-party JDBC driver, see the appropriate website (for example, http://www.mysql.com for the MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the jTDS driver for Microsoft SQL Server and Sybase Adaptive Server, or search at http://www.teradata.com/ for the JDBC driver for Teradata). For MySQL, use the MySQL 5.0 driver, not 5.1 or later, with SQL Developer release 1.5.
You must specify a third-party JDBC driver or install a driver using the Check for Updates feature before you can create a database connection to a third-party database of that associated type. (See the tabs for creating connections to third-party databases in the Create/Edit/Select Database Connection dialog box.)
Alternative:
As an alternative to using this preference, you can click Help, then Check for Updates to install the JTDS JDBC Driver for Microsoft SQL Server and the MySQL JDBE Driver as extensions.
Regards,
Mike

Error when installing SQL Server 2008 R2 after downloading

Hi -I hope somebody can help me.
I have tried to install nopCommerce with no luck. I am not able to establish the SQL database. I have tried to solve the problem for a very long time, also with no luck. Now I think it has to do with an error that come when I installed the SQL Server 2008
R2.
I have tried to load a picture here, but was denied.
with hopes for help
Regards Egil Ryengen
The error text is as followed:
Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co

Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co
Did you read hardware and software requirements before installing SQL Server 2008 R2. I guess you are missing .Net framework. AS per
This Doc
You need to download and install .Net framework 3.5 SP1 and requirement is more if you are installing express edition. Its all mentioned in link
You can also refer to
this Thread it has same issue as you are having
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I have a problem, i bought lion but when i want to install he said me i need to "download osx lion server" i'm running with the last lion beta. how to update please?

i have a problem, i bought lion but when i want to install he said me i need to "download osx lion server" i'm running with the last lion beta. how to update please?
ps: sorry for my english :S

You apparently are using a version of OS X you did not purchase using your Apple ID. Although you can download Mavericks you cannot install it over your current system. You must repartition your hard drive, then reinstall the version of OS X originally installed when it came new from the factory. That would be on the installer discs that should have come with the computer. If the computer did not come with discs from the factory but OS X was pre-installed (Lion or Mountain Lion) then you can perform an Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

"A Suitespot Server" tab disappears after Calendar Server install

After installing another Suitespot server and then Calendar, the tab from one
of the other servers disappears. I reinstall that server, then the Calendar
Server tab disappears!

Using a text editor, verify that the suitespot_server_root/admin-serv/config/servers.lst
file has no extra white spaces or erroneous chars in the front or end
of each line. If there are, delete the extra character and reload
your admin page. Then, make sure you see each one of your servers listed by an
on/off button.

If you have the Z68MA-D2H-B3 board, go here and get the UEFI update.
http://www.gigabyte.us/products/product-page.aspx?pid=3975#bios
UEFI is the BIOS replacement. Once that is done you can use USB 3.0 with Win8 and Hyper-V. Oh, and the computer boots about twice as fast. At least that was my experience. There is a list of Gigabyte utilities that need to be removed first, so read
the instructions well.
"(Note) Some GIGABYTE utilities are not supported under UEFI BIOS architecture. Please remove Smart6, Dynamic Energy Saver, Smart TPM, and Touch BIOS utilities before updating the BIOS."
I used a FreeDOS bootable USB to apply the update, since you can't do it from inside Windows or through the BIOS updater.
http://rufus.akeo.ie/
You may need a clean re-install Win8 afterwards. I did it out of habit, so I don't know if it will pick up the changes and work without it. Back your stuff up first just in case you do.

Download/Install Calendar server separately

Similar Messages

Maybe you are looking for