Download/install drivers for printer on windows 8.1 64 bit

Hi.
Just bought a new laptop with a Windows 8.1 6 4bit operating system.  My  HP C6180 all in one printer came with discs for Vista. I entered the HP support site in order to install new drivers.  I found the correct driver and tried to install but half way through download I get a box flash up saying  "Fatal Error".  It then searched for a solution but could not find one so I had to cancel the installation process.  This happened 3 times so I would be grateful if anybody could offer a solution.
Thank you.
david-joseph

Hi,
Please manual download the following software and drivers:
    http://ftp.hp.com/pub/softlib/software12/COL30677/mp-110021-2/AIO_CDA_FSW_Full_Win_WW_140_408-4.exe
Save it to your comuter (remember where). Aftre that, right click the download file and select install as administrator.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Satellite L500-1EN - Where to find drivers for XP and Windows 7?

    To me are necessary the driver for L500-1en. On a site has not found. If it is fashionable to use the driver from other model write from what.
    To me are necessary the driver on Windows XP, Windows 7.

    Hello
    I have a little bit searched on the Toshiba website and it seems that your model belongs to the PSLJTE series and therefore you can download all drivers for XP and Windows 7 here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Notebook > Satellite > Satellite L Series > Satellite L500 > PSLJTE
    Check this!!!

  • I have an HP mini 210-214 dxpc want to install drivers for hp officejet G85 printer

    Help I'm at wits end I need driver (s) for hp officejet G85 all in one printer installed in my hp mini 210-214 dxpc with an upgraded windows 7 ultimate os in it.i've done everything i can find on hp website, the wizard finds the printer but no driver, windows can't find the driver, hp says its in my os already as a __os driver i cant find it or get this going been doing this for10 hrs now please somebody make it simple for me to install the necessary driver or whatever it is i need to do to get this printer operating from my laptop. oh this is through a usb connection if you need to know that.
    thank you for helping

    Hi @GoddessDiamond,
    Welcome to the HP Forums!
    I understand that you are trying to install drivers for your HP Officejet G85 printer on Windows 7. I am happy to help!
    Please take a look through this installation guide, Installing the Printer Driver Using the Windows 7 Built-in Solution for a USB Cable Connection.
    Otherwise, if that does not work, you can try to download the Windows XP driver, HP Officejet Basic Software and Driver, and run it using compatibility mode. Make older programs run in this version of Windows.
    If neither of those two options work, then the last step is to try an alternative driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R. 
    Hope this information resolves your issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How to manually install drivers for windows 7 64 bit?

    How do I install drivers for iphone 5s?  My desktop windows 7 64 bit is not recognizing the iphone

    Download and install the 64 bit version of iTunes to get all drivers for iOS devices.
    http://www.apple.com/itunes/download/

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

    I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

    Go back to Boot Camp: on the 2nd page you get this:
    Download the support software and as Windows is already installed uncheck the 2nd box.

  • How do I download 32bit Drivers for Windows 7 on Bootcamp for OSX 10.8.1?

    Here is the deal,
    I am a computer technician for a library and I am installing Windows 7 on four brand new Apple MiniMacs with OSX 10.8.1 on them (don't ask). The Mac came with no install Disks and the Bootcamp Assistant only downloads 64bit drivers for windows. I am installing Windows 7 32bit on them and I need the drivers. How can I get them? Can somebody assist me please?

    Jpac-Parks wrote:
    I have machine shop tools and irreplaceable software that only run 32 bit and I really have a serious need for 32 bit windows support. I feel Maverics should support these old 32 bit tools.
    Buy a Windows machine or an older Mac if you wish to use 32bit Windows. (what are you going to do when MS quit supporting 32bit systems?)

  • Unable to install C4500 HP printer on Windows 8

    I just bought a new computer (acer) and have installed the photosmart c4580, which prints fine with a USB cable, but am unable to find instructions on how to use the printer wirelessly on this laptop...can you please assist.  mark
    This question was solved.
    View Solution.

    Hi,
    Please run the following program on your Windows 8 machine:
       ftp://15.217.49.143/pub/softlib/software12/COL44840/mp-115766-2/hppiw.exe
    It will ask few question and install drivers for you. You need to connect to Internet to be able to run.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can anyone tell why I cannot install drivers for my IPOD Clasic

    I have iTunes installed and I cannot install drivers for my IPOD Classic while using windows vista 64 bit?

    Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

  • I cann't install drivers for wifi and usb2 on inspiron 3721.

    Hi.
    I cann't install drivers for wifi and usb2 on inspiron 3721.
    My OS is windows 8.1
    ID for usb2:
    USB\VID_0BDA&PID_0129&REV_3960
    USB\VID_0BDA&PID_0129
    ID for wifi:
    PCI\VEN_168C&DEV_0036&SUBSYS_020C1028&REV_01
    PCI\VEN_168C&DEV_0036&SUBSYS_020C1028
    PCI\VEN_168C&DEV_0036&CC_028000
    PCI\VEN_168C&DEV_0036&CC_0280
    Please, help me!

    Install the Intel Chipset Drivers if you haven't done so already:
    https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
    http://downloads.dell.com/FOLDER01739853M/1/Chipset_Driver_498GM_WN_9.5.14.1724_A01.EXE
    http://downloads.dell.com/FOLDER01744340M/2/AHCI_Intel_W8.14_X00_A01_Setup-9V0D2_ZPE.exe
    That's the Realtek Card Reader:
    http://downloads.dell.com/FOLDER01692810M/1/Chipset_Driver_7HRCT_WN_6.2.9200.39050_A00.EXE
    That's an Atheros Dell Wireless 1705 Wireless Card use this driver:
    http://downloads.dell.com/FOLDER02227589M/1/3340_Network_Driver_XVXC6_WN_10.0.0.320_A00.EXE
    Also install...
    Aeroplane Switch Driver:
    http://downloads.dell.com/FOLDER01646912M/260/AirplaneMode_W81_x64_1.4.1_ZPE.exe
    Touchpad:
    http://downloads.dell.com/FOLDER01918135M/1/Input_Driver_JCY9W_WN_18.0.1_A08.EXE
    Audio:
    http://downloads.dell.com/FOLDER01706440M/1/Audio_Driver_8F9KD_WN_6.0.1.7023_A00.EXE
    Video:
    http://downloads.dell.com/FOLDER01815953M/1/Video_Driver_W1PPW_WN_10.18.10.3316_A02.EXE
    http://downloads.dell.com/FOLDER01726226M/1/Video_Driver_3JMFD_WN_13.151.0.0_A00.EXE
    Dell Quickset:
    http://downloads.dell.com/FOLDER01861763M/1/Application_7JTWX_WN_10.16.004_A01.EXE
    You may also update the BIOS to A12:
    http://downloads.dell.com/FOLDER01818934M/1/3721A12.exe

  • How to install drivers for ati radeon 3200?and how to config xorg.co ?

    how to install drivers for ati radeon 3200?and how to config xorg.conf?

    mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
    Hello
    I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
    #pacman -Sy
    #pacman -S -l | grep -i catalyst
    #pacman -S catalyst catalyst-utils
    After installation reboot your machine in runlevel 1. (single mode).  Ensure "fglrx" module is loaded correctly using
    #lsmod | grep -i fglrx
    If the resultant output have "fglrx" part  the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
    #cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
    Then issue
    #aticonfig --initial --input=/etc/X11/xorg.conf
    This will create a new xorg.conf file. Now we can test our confign.
    #telinit 3
    I am using runlevel 3 to avoid graphic messup!!
    issue
    #gdm
    If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
    To know your ati driver is working correctly issue as root
    #fgl_glxgears
    If gears are rolling happily it seems correct. You can also know more about installed ati driver
    #fglrxinfo
    Now the installed driver version is in the output 
    If there is any problem try following
    ##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
    yes video playback is choppy until i ran :-
    sudo aticonfig --overlay-type=Xv
    Try adding the following to the 'Device' section in /etc/X11/xorg.conf
    Option "TexturedVideo" "true"
    ### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
    mythfrontend --geometry 800x600
    Append the "Device" Section of /etc/X11/xorg.conf file as follows;
    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    Option "OpenGLOverlay" "off"
    Option "VideoOverlay" "on"
    Option "TexturedVideo" "on"
    Option "TexturedVideoSync" "on"
    Option "Capabilities" "0x00000800"
    BusID "PCI:1:0:0"
    EndSection
    Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
    export LIBGL_ALWAYS_INDIRECT=true
    ####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
    ####### as in the following example
    title  Archlinux Ice Kernel
    root   (hd0,1)
    kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
    initrd /boot/kernel26-ice.img
    NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!!  ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
    Wish U good luck
    mvdvarrier

  • Unable to install C4500 HP printer on Windows 7

    unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista.  What do I need to do??
    This question was solved.
    View Solution.

    Hi,
    You may download the Windows7 compatible software below:
    http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
    Make sure the USB cable is unplug before performing the installation.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How install drivers for vista 32bits on iMac ?

    i need to install drivers for vista 32 pro bits on my bootcamp partition on my imac 27".
    bootcamp assistant fifd only windows seven drivers
    could you help me .?
    regards

    There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

  • I can`t install drivers for Promise IDE on WINXP.

    Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
    And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
    PS. Sorry for my bad english.

    Quote
    Originally posted by Athlon1000
    But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
    That's correct  
    So if I do not misunderstand you, Windows hangs when accessing the drive?
    Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
    Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
    If it works there you should use this configuration.
    I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
    What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
    I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
    Maybe you give it a try  
    PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

  • Trying to install drivers for my scanner, not working

    I'm trying to install drivers for a canon scanner, it's not working. I ownloaded them from the canon website and they are for Mac OS 9, would they still work? or do i really have to get a new scanner?

    Hi Anna
    Which model of scanner is it? Have you checked thoroughly to see whether OS X drivers exist?
    Matthew Whiting

Maybe you are looking for