Download & Install Nvidia Hybrid Graphics on dm3

In the stock windows, Hybrid graphics was given and it worked satisfactorily 
but i had to reinstall windows and then it was that the graphics driver was gone and no drivers got installed
so i need the link to download the hybrid graphics driver
thank you plz help. i dont mind doing hard work and install third party drivers

Hi,
Nvidia combines them in one package. The latest one is 334.89. You can use automatic detect from from Nvidia:
     http://www.nvidia.com/Download/Scan.aspx?lang=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Not Able To Install Nvidia Graphics Drivers

    Hello all!
    This past week I just finished putting my new system together with a K8N Diamond Plus. Only major problem right now is i am not able to install Nvidia's drivers. Below are my components...
    XP 64-Bit Edition
    MSI K8N Diamond Plus
    AMD Athlon 64 X2 3800+
    BFG 7900 GTX 512MB
    1 Gig Coirsar Ram
    2 Wester digital HD in Raid 0
    When I try and install the graphics drivers i get the message " The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
    I used the chip set drivers listed here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
    Also I have tried the ones from NVIDIA's site: http://www.nvidia.com/object/nforce_nf4_winxp64_x16_6.83
    The graphics drivers i used are from NVIDIA's site: http://www.nvidia.com/object/winxp64_81.98.html
    BFG Tech support guy had me look under display adapters in device manager. It only has Standard VGA Graphics Adapter listed. He said I did not have my chip set drivers installed (though i have), or the motherboard was not recognizing it. Also he said they do not support XP-64 and would not offer me any more support so long as i run it.
    I just can not believe that XP 64, 7900 GTX, and this great K8N Diamond Plus can not get along.
    Any advice anyone has for getting my Diamond Plus and my graphics card to jive together would be greatly appricated.
    Thankyou all!!

    Thankyou guys for the responses. I was able to find drivers that worked with my card here..
    http://www.laptopvideo2go.com/index.php?drivers&series=80&os=2&type=1&dir=1
    Now my only current issue left is that I have no sound. It is enabled in the BIOS, installed the 64-bit drivers from MSI site, tired installing drivers off disk. Any suggestion?

  • I have installed nvidia graphics drivers on windows 7 (bootcamp) now i can't use windows, it's just a black screen, how do i resolve this?

    I have installed nvidia drivers from nvidias website for my geforce gt 650m on my early 2013 macbook pro retina 15", now i can't use windows in bootcamp, whenever i go into windows it turns into a black screen before i can see my desktop. How do i resolve this?

    From the home screen, double click the home button to bring up the Recently used App list. Find the App with the problem and hold your finger on it untl the Apps start to shake. When that happens tap on the (x) on the right side corner of the app to close it.
    Tap the home button again to get back to the home screen, and try to open the App again.
    If that doesn't work, try resetting the iPad. (there should be no data loss):
    Press and Hold the Power and home buttons until the Apple Logo shows up. Ignore any sliders that may appear.
    When the iPad turns back on, try opening the App again.

  • NVIDIA announces support for hybrid graphics (finally)

    http://www.h-online.com/open/news/item/ … 97756.html
    I don't know if anyone else has had to deal with the torture that is hybrid graphics but this is pretty big news to me

    cybertorture wrote:..now we can be happy ... or can we ? Oo
    followup to "can we?":
    http://www.h-online.com/open/news/item/ … 29053.html

  • Hybrid graphics -- cannot access second GPU [SOLVED]

    I have latest Arch on my desktop, with Intel 4770k including an integrated graphics. Recently I installed a Geforce GTX 750 Ti into the desktop and want to use this hybrid GPU system. Problem is after I installed nouveau + bumblebee + bbswitch, the system cannot access the second (nVidia) GPU:
    optirun -vv glxgears
    and the output is:
    [ 41.936801] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 41.937150] [DEBUG]optirun version 3.2.1 starting...
    [ 41.937160] [DEBUG]Active configuration:
    [ 41.937162] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 41.937165] [DEBUG] X display: :8
    [ 41.937167] [DEBUG] LD_LIBRARY_PATH:
    [ 41.937169] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 41.937171] [DEBUG] Accel/display bridge: auto
    [ 41.937173] [DEBUG] VGL Compression: proxy
    [ 41.937175] [DEBUG] VGLrun extra options:
    [ 41.937177] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [ 41.937216] [DEBUG]Using auto-detected bridge virtualgl
    [ 41.950748] [INFO]Response: No - error: [XORG] (EE) systemd-logind: failed to get session: PID 924 does not belong to any known session
    [ 41.950767] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) systemd-logind: failed to get session: PID 924 does not belong to any known session
    [ 41.950769] [DEBUG]Socket closed.
    [ 41.950777] [ERROR]Aborting because fallback start is disabled.
    [ 41.950789] [DEBUG]Killing all remaining processes.
    I looked through several posts, but still do not quite understand how to solve this problem. Besides, there is no
    /proc/acpi/bbswitch
    file in my directory. I am sure I have installed bbswitch already.
    Thanks very much.
    Last edited by nullwax (2014-08-22 15:34:22)

    ArchAddict wrote:I am using a GT 770M and it works just fine for me. Instead of using nouveau have you tried only xf86-video-intel, nvidia, and bumblebee? Using optirun with these packages and it works for me like a charm.
    Thanks, ArchAddict. I remove nouveau things and install nvidia. Seems it works now. Quite strange, since previously there is a conflict when install official package nvidia.
    However, there is another thing right now:
    optirun -vv glxgears
    and the last part of the output becomes:
    [ 269.013157] [INFO]Response: Yes. X is active.
    [ 269.013176] [INFO]Running application using virtualgl.
    [ 269.013265] [DEBUG]Process vglrun started, PID 1292.
    /usr/bin/vglrun: line 241: exec: glxgears: not found
    [ 269.018514] [DEBUG]SIGCHILD received, but wait failed with No child processes
    [ 269.018532] [DEBUG]Socket closed.
    I am not quite familiar with graphics card things, and what does it mean by glxgears: not found? Thanks a lot.

  • IE11 Hybrid Graphics Fiasco is Back ?

    IE11 update on my Windows 7 64bit Thinkpad E520 11433NG failed.  After the first step of update, the second step of update configuration failed with :
    "Failure configuring Windows updates. Reverting changes."
    IE version was back to IE10.
    Since IE10 there is an ongoing problem with the browser supporting Hybrid Graphics. Microsoft puts the blame on AMD/Nvidia.
    Issue 2: Incompatible video card drivers
    Some computers that have hybrid video adapters are not yet compatible with Internet Explorer 11 for Windows 7. Internet Explorer 11 will not install on these systems until updated hardware drivers are installed. For more information about this issue, click the following article number to go to the article in the Microsoft Knowledge Base:
     Internet Explorer 11 does not install on some hybrid graphics systems
    http://support.microsoft.com/kb/2872074

    Bump.
    IE is part of Windows OS and many applications use parts of IE to render data.
    So, even if you don't use IE as your default browser it is highly advisable to upgrade to the new version.
    Is Lenovo going to release IE11 compatible video drivers ?

  • T410 - Install NVIDIA & Intel HD drivers, or just install Optimus drivers?

    Hi Folks,
    I'm entirely confused about which drivers I should install.  Do I install NVIDIA and Intel HD drivers separately?  Or, do I just install Optimus drivers when they come out?  Or do I install all 3?
    thanks,
    alex
    T410 2516-CTO
    Optimus graphics, NVIDIA NVS 3100M with integrated intel HD

    I would like to share with you that you need to update both drivers, first you need to update the Intel HD and then NVIDIA graphics software of your notebook from the below mentioned web link.
    http://support.lenovo.com/en_US/downloads/default.​page?
    After this, please restart the notebook and check if the issue resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Re: Satellite P850 - cannot install Nvidia driver from NVIDIA webpage

    Hello,
    I bought a Satellite P850 like 2 months ago,is a great notebook and i love it.
    Well the question is,i checked nvidia web page to check last drivers,i saw that my pc got 295.55 and nvidia web page got 301.42,so i tried to update but is impossible. After download and press install it say that is not compatible,what is the way to update them?
    Thanks so much.
    And sorry for my english.

    Go to the driver download page (UK in this example) [http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk] and take Option 2: Automatically find drivers for my NVIDIA products. and select Graphics Driver. This downloads a program that examines your PC and identifies if there is a new driver and offers to download/install it. (The program may not run under Google Chrome)
    I have had no problem using Nvidia drivers and until a couple of years ago they would not supply laptop drivers but they now have them "WHQL" ( [http://en.wikipedia.org/wiki/WHQL_Testing] ) certified and released to the public.

  • Install Nvidia 52.16 Doubt

    can anyone tell me how to install the nvidia 52.16 driver ?
    i already install it
    but dont have the clock setting

    Hope these info can help you guys out  ...[/SIZE][/COLOR]
    Quote
    can anyone tell me how to install the nvidia 52.16 driver ?
    Steps to install nVIDIA 52.16 WHQL drivers with MSI clock settings.
    1: Install any MSI 4X.XX series drivers(44.03 first version).
    2. Go to Device Manager.
    3. Look under Display Adapter.
    4. Double Click on your Graphics Card Indicator.
    5. Click on Driver tab.
    6. Click on un-install driver/remove driver.
    (Please make sure that you've download the 52.16 nVIDIA driver and remember where you've keep the dowmloaded file.)
    7. Restart system.
    8. Log into Windows as normal.
    9. Let Hardware detection auto detects for new hardware(VGA card) 1st.
    10. Once New Hardware was detected and when you are prompt to install the driver, click on 'Cancel' to cancel installation from here.
    11. Double Click on the downloaded 52.16 nVIDIA driver file.
    (Note: This file will auto unzipped and prompt you to save the files, just save the files to your C: or whatever defaults it has given.)
    12. Wait for the nVIDIA auto extraction and after extracting the file, you'll have to wait for around 30 secs for the Installation Wizard to guide you through the process.
    13. Install the driver through this Installation Wizard.
    14. Restart system after installation of the driver.
    15. Right click on desktop> properties, to see if you can access MSI Information, MSI Clock and all other information. Check if the listed info are correctly stated.
    (Please make sure that your see Driver Information under the MSI Information tab that the driver version is listed as X.XX.XX.5216[/u].
    NOTE: Please kindly note that nVIDIA 52.16 does not allow clock settings to be keep after you've restart your system. It will suto reset everything to the card's default.
    Quote
    another question is how come my agp voltage is 1.5 and not 0.8v ??
    If you've install your drivers with the above steps, you should see your AGP Traffic being Enabled at 8x unless your mobo is capable of handling 4x only.
    Quote
    Q3 ) how come the msi 45.32 and msi 45.33
    Forget about the MSI drivers unless you really wants to keep the clock settings all the time, stick to nVIDIA ones, they update faster than any 2nd party drivers.
    Quote
    Same problem here.. I suppose we'll have to wait 6mnths for MIS to update there version of the 52.XX drivers....
    Unless you really wants to keep the adjusted clock settings each time you bootup to Windows, else keep on with the nVIDIA ones. This 52.16 is a monster driver, giving a great boost of fps for the FX cards even at defaults

  • Satellite P105 - Can't install nVidia display driver

    I tried completing the download multiple times for the nVidia Display Driver 9.7.5.4.
    The first times the setup would not complete citing "that this computer does not have the correct hardware.." , then the Windows message came up and said that "if this setup did not complete successfully click here blabla" and I did that.
    Now when I run the setup it still stops in the same spot. But now it says that *"the setup can not be completed because this driver only runs on Windows Vista, and this is not Windows Vista." But the thing is I do have Windows Vista!*
    Current Display Driver: Mobile Intel(R) 945 GM Express ChipSet Family
    Laptop Model: Satellite P105-S6177
    Operating System: Windows Vista 32-bit

    Hi
    > Current Display Driver: Mobile Intel(R) 945 GM Express ChipSet Family
    And then you want to install an nVidia display driver?
    LOL :D
    I think you can not install an nVidia display driver because your notebook is equipped with a Intel chipset and graphic card.
    You will never be able install nVidia display driver and so did get the message that you don’t have the correct hardware.
    Intel graphic cards and nVidia graphic cards are different things so do not mix it!
    Some P105 was equipped with nVidia cards and otheres with Intel card and it seems that you have an Intel card.

  • Problem with Intel/ATI Hybrid Graphics

    Hi, I Just got a new laptop with the intel(hd4400)/ati(hd8670m) hybrid graphics. I followed exactly this https://wiki.archlinux.org/index.php/Hy … ons_So_Far, trying to disable my discrete card, but I did not have vgaswitcheroo under /sys/kernel/debug. Then I did a reboot, it stopped booting after FSCK, no login for me. I did add radeon and i915 to MODULES in /etc/mkinitcpio.conf if that's what you are wondering. I had to chroot with Arch installer and add a basic 20-intel.conf file to be able to boot into my DE.
    dmesg output below shows that I had radeon loaded, but still no vgaswitcheroo directory.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg_tf-lv_root rw quiet radeon.dpm=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009a36efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a36f000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001051000) (15MB)
    [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001051000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f51000) (15MB)
    [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002f51000-0x000000003737a000) (836MB)
    [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000003737a000-0x00000000379b5000) (6MB)
    [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000379b5000-0x000000006d8c0000) (863MB)
    [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000006d8c0000-0x0000000092d70000) (596MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000092d70000-0x0000000092d90000) (0MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000092d90000-0x0000000093ee1000) (17MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000093ee1000-0x0000000094d60000) (14MB)
    [ 0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000094d60000-0x0000000095d60000) (16MB)
    [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000095d60000-0x0000000095f52000) (1MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x0000000095f52000-0x0000000095f6f000) (0MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000095f6f000-0x0000000097260000) (18MB)
    [ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000097260000-0x0000000097262000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x0000000097262000-0x0000000097272000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000097272000-0x000000009727c000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000009727c000-0x0000000097c77000) (9MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000097c77000-0x0000000097c7a000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000097c7a000-0x0000000097c81000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000097c81000-0x0000000097c82000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000097c82000-0x0000000097db2000) (1MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000097db2000-0x0000000097db3000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000097db3000-0x0000000097e0a000) (0MB)
    [ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x0000000097e0a000-0x0000000097e17000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000097e17000-0x0000000097e1f000) (0MB)
    [ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x0000000097e1f000-0x0000000097e20000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000097e20000-0x0000000097e2c000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x0000000097e2c000-0x0000000097e34000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000097e34000-0x0000000097e4c000) (0MB)
    [ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000097e4c000-0x0000000097e4d000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000097e4d000-0x0000000097e50000) (0MB)
    [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000097e50000-0x0000000097e57000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000097e57000-0x0000000097e6e000) (0MB)
    [ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000097e6e000-0x0000000097ee9000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000097ee9000-0x0000000097efc000) (0MB)
    [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000097efc000-0x0000000097efd000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000097efd000-0x0000000097f0b000) (0MB)
    [ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x0000000097f0b000-0x0000000097f0d000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000097f0d000-0x000000009810f000) (2MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000009810f000-0x0000000098111000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000098111000-0x0000000099f6f000) (30MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000099f6f000-0x000000009a36f000) (4MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x000000009a36f000-0x000000009a56f000) (2MB)
    [ 0.000000] efi: mem50: type=6, attr=0x800000000000000f, range=[0x000000009a56f000-0x000000009aabf000) (5MB)
    [ 0.000000] efi: mem51: type=0, attr=0xf, range=[0x000000009aabf000-0x000000009aebf000) (4MB)
    [ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
    [ 0.000000] efi: mem53: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
    [ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
    [ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000015f600000) (1526MB)
    [ 0.000000] efi: mem56: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
    [ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem59: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem63: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem65: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A05 08/30/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
    [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
    [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
    [ 0.000000] 5 base 0100000000 mask 7F80000000 write-back
    [ 0.000000] 6 base 015F600000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 base 015F800000 mask 7FFF800000 uncachable
    [ 0.000000] 8 base 0160000000 mask 7FE0000000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000007e000] 7e000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
    [ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
    [ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
    [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
    [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
    [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
    [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x94d5ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x94bfffff] page 2M
    [ 0.000000] [mem 0x94c00000-0x94d5ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x95d60000-0x9a36efff]
    [ 0.000000] [mem 0x95d60000-0x95dfffff] page 4k
    [ 0.000000] [mem 0x95e00000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a36efff] page 4k
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x3737a000-0x379b4fff]
    [ 0.000000] ACPI: RSDP 000000009affe014 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 000000009affe210 000AC (v01 DELL CL09 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009aff8000 0010C (v05 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202)
    [ 0.000000] ACPI: DSDT 000000009afe9000 0B8AC (v01 DELL CL09 00000000 ASL 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 00040
    [ 0.000000] ACPI: SLIC 000000009affd000 00176 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: UEFI 000000009affc000 00236 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: FPDT 000000009affa000 00044 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: ASF! 000000009aff9000 000A5 (v32 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: HPET 000000009aff7000 00038 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: APIC 000000009aff6000 0008C (v03 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff5000 0003C (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe8000 006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afe6000 00028 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: ASPT 000000009afe4000 00034 (v07 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: DBGP 000000009afe3000 00034 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 000000009afdd000 00539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afdc000 00AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 0343C (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd5000 01E3D (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 000000009afd7000 00038 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
    [ 0.000000] NODE_DATA [mem 0x15f5f8000-0x15f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x94d5ffff]
    [ 0.000000] node 0: [mem 0x95d60000-0x9a36efff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
    [ 0.000000] On node 0 totalpages: 1018102
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9742 pages used for memmap
    [ 0.000000] DMA32 zone: 623472 pages, LIFO batch:31
    [ 0.000000] Normal zone: 6104 pages used for memmap
    [ 0.000000] Normal zone: 390656 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a36f000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88015f200000 s86528 r8192 d24064 u262144
    [ 0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002170
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg_tf-lv_root rw quiet radeon.dpm=1
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3856592K/4072408K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 215816K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.570 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.35 BogoMIPS (lpj=7648566)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000040] init_memory_mapping: [mem 0x9a36f000-0x9a56efff]
    [ 0.000042] [mem 0x9a36f000-0x9a56efff] page 4k
    [ 0.000064] init_memory_mapping: [mem 0x9a56f000-0x9aabefff]
    [ 0.000066] [mem 0x9a56f000-0x9a5fffff] page 4k
    [ 0.000067] [mem 0x9a600000-0x9a9fffff] page 2M
    [ 0.000069] [mem 0x9aa00000-0x9aabefff] page 4k
    [ 0.059748] Security Framework initialized
    [ 0.059759] AppArmor: AppArmor disabled by boot time parameter
    [ 0.059761] Yama: becoming mindful.
    [ 0.060120] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.061320] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.061810] Mount-cache hash table entries: 256
    [ 0.062052] Initializing cgroup subsys memory
    [ 0.062063] Initializing cgroup subsys devices
    [ 0.062065] Initializing cgroup subsys freezer
    [ 0.062067] Initializing cgroup subsys net_cls
    [ 0.062069] Initializing cgroup subsys blkio
    [ 0.062098] CPU: Physical Processor ID: 0
    [ 0.062100] CPU: Processor Core ID: 0
    [ 0.062105] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.063398] mce: CPU supports 7 MCE banks
    [ 0.063415] CPU0: Thermal monitoring enabled (TM1)
    [ 0.063429] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.063562] Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    [ 0.064699] ACPI: Core revision 20130517
    [ 0.077923] ACPI: All ACPI Tables successfully acquired
    [ 0.083767] ftrace: allocating 20100 entries in 79 pages
    [ 0.096243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.129231] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
    [ 0.129240] TSC deadline timer enabled
    [ 0.129252] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.129261] ... version: 3
    [ 0.129262] ... bit width: 48
    [ 0.129263] ... generic registers: 4
    [ 0.129265] ... value mask: 0000ffffffffffff
    [ 0.129267] ... max period: 0000ffffffffffff
    [ 0.129268] ... fixed-purpose events: 3
    [ 0.129269] ... event mask: 000000070000000f
    [ 0.167457] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.152681] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.209878] Brought up 4 CPUs
    [ 0.209882] smpboot: Total of 4 processors activated (18363.41 BogoMIPS)
    [ 0.215147] devtmpfs: initialized
    [ 0.216459] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.217451] RTC time: 2:22:13, date: 11/08/13
    [ 0.217501] NET: Registered protocol family 16
    [ 0.217661] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.217663] ACPI: bus type PCI registered
    [ 0.217666] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.217737] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.217740] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.252752] PCI: Using configuration type 1 for base access
    [ 0.252922] dmi type 0xB1 record - unknown flag
    [ 0.253726] bio: create slab <bio-0> at 0
    [ 0.253868] ACPI: Added _OSI(Module Device)
    [ 0.253870] ACPI: Added _OSI(Processor Device)
    [ 0.253872] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.253874] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.256659] ACPI: EC: Look up EC in DSDT
    [ 0.259524] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.272874] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.274013] ACPI: SSDT 000000009ae7dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.274706] ACPI: Dynamic OEM Table Load:
    [ 0.274709] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.282313] ACPI: SSDT 000000009ae7d618 005AA (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.283108] ACPI: Dynamic OEM Table Load:
    [ 0.283111] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.301675] ACPI: SSDT 000000009ae7cd98 00119 (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.302368] ACPI: Dynamic OEM Table Load:
    [ 0.302370] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.431586] ACPI: Interpreter enabled
    [ 0.431597] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
    [ 0.431606] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 0.431630] ACPI: (supports S0 S3 S4 S5)
    [ 0.431632] ACPI: Using IOAPIC for interrupt routing
    [ 0.431666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.431855] ACPI: No dock devices found.
    [ 0.634551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.634846] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.635302] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    [ 0.635816] PCI host bridge to bus 0000:00
    [ 0.635820] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.635823] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.635825] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.635828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.635830] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.635832] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.635834] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.635836] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.635838] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.635840] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.635842] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.635844] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.635846] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.635848] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.635850] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.635852] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.635854] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.635856] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.635867] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.636037] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.636053] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 0.636062] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.636069] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 0.636232] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.636243] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
    [ 0.636435] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.636456] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit]
    [ 0.636523] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.636647] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.636693] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.636717] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit]
    [ 0.636795] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.636949] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.636965] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit]
    [ 0.637037] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.637182] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
    [ 0.637255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.637400] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.637446] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.637518] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.637662] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 0.637734] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.637885] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.638879] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff]
    [ 0.644729] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.644857] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.644903] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.645161] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.645179] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 0.645188] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 0.645196] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 0.645205] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 0.645213] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 0.645222] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff]
    [ 0.645264] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.645401] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.645417] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit]
    [ 0.645440] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 0.645679] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.645710] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
    [ 0.645750] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit]
    [ 0.645779] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
    [ 0.645873] pci 0000:01:00.0: supports D1 D2
    [ 0.645875] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.652308] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.652312] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.652316] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
    [ 0.652322] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.652414] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
    [ 0.652447] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc067ffff 64bit]
    [ 0.652527] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.652608] pci 0000:02:00.0: supports D1 D2
    [ 0.652610] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.658964] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.658970] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.659066] pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
    [ 0.659093] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.659113] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit]
    [ 0.659127] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.659154] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.659233] pci 0000:03:00.0: supports D1 D2
    [ 0.659235] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    [ 0.665628] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.665632] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.665636] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.665642] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.665658] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.726347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726411] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726470] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726529] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726705] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.727383] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.727392] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.727488] Found 1 acpi root devices
    [ 0.727533] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.727642] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.727647] vgaarb: loaded
    [ 0.727648] vgaarb: bridge control possible 0000:00:02.0
    [ 0.727700] PCI: Using ACPI for IRQ routing
    [ 0.734096] PCI: pci_cache_line_size set to 64 bytes
    [ 0.734149] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.734151] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.734152] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff]
    [ 0.734154] e820: reserve RAM buffer [mem 0x9a36f000-0x9bffffff]
    [ 0.734157] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 0.734158] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
    [ 0.734265] NetLabel: Initializing
    [ 0.734267] NetLabel: domain hash size = 128
    [ 0.734268] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.734282] NetLabel: unlabeled traffic allowed by default
    [ 0.734302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.734309] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.736336] Switched to clocksource hpet
    [ 0.741791] pnp: PnP ACPI init
    [ 0.741808] ACPI: bus type PNP registered
    [ 0.741844] pnp 00:00: [dma 4]
    [ 0.741872] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.741898] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.742037] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.742091] system 00:03: [io 0x0680-0x069f] has been reserved
    [ 0.742094] system 00:03: [io 0xfd60-0xfd63] has been reserved
    [ 0.742096] system 00:03: [io 0xffff] has been reserved
    [ 0.742099] system 00:03: [io 0xffff] has been reserved
    [ 0.742101] system 00:03: [io 0xffff] has been reserved
    [ 0.742103] system 00:03: [io 0x1800-0x18fe] could not be reserved
    [ 0.742106] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.742109] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.742169] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.742223] system 00:05: [io 0x1854-0x1857] has been reserved
    [ 0.742227] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.742290] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.742323] pnp 00:07: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
    [ 0.799825] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.799828] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.799831] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.799833] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.799836] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.799838] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.799840] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.799843] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.799845] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.799848] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.799850] system 00:08: [mem 0x9fa22000-0x9fa22fff] has been reserved
    [ 0.799853] system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.799856] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.800510] pnp: PnP ACPI: found 9 devices
    [ 0.800512] ACPI: bus type PNP unregistered
    [ 0.807188] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.807192] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.807227] pci 0000:00:1c.3: BAR 15: assigned [mem 0x9fb00000-0x9fbfffff pref]
    [ 0.807230] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.807234] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.807240] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
    [ 0.807244] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.807251] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
    [ 0.807254] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.807259] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.807263] pci 0000:00:1c.3: bridge window [mem 0x9fb00000-0x9fbfffff pref]
    [ 0.807270] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
    [ 0.807272] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.807275] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.807280] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.807285] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.807584] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.807586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.807589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.807591] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.807593] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.807595] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.807597] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.807599] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.807601] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.807603] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.807605] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.807607] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.807609] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.807611] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.807613] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.807615] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    [ 0.807617] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
    [ 0.807619] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 0.807622] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
    [ 0.807624] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.807626] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
    [ 0.807628] pci_bus 0000:02: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
    [ 0.807630] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.807632] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
    [ 0.807635] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.807677] NET: Registered protocol family 2
    [ 0.807890] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.808027] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.808127] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.808150] TCP: reno registered
    [ 0.808162] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.808181] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.808261] NET: Registered protocol family 1
    [ 0.808274] pci 0000:00:02.0: Boot video device
    [ 0.823082] PCI: CLS 64 bytes, default 64
    [ 0.823122] Unpacking initramfs...
    [ 0.982411] Freeing initrd memory: 6380K (ffff88003737a000 - ffff8800379b5000)
    [ 0.982417] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.982420] software IO TLB [mem 0x8ed70000-0x92d70000] (64MB) mapped at [ffff88008ed70000-ffff880092d6ffff]
    [ 0.982447] Simple Boot Flag at 0x44 set to 0x1
    [ 0.982626] Scanning for low memory corruption every 60 seconds
    [ 0.982970] audit: initializing netlink socket (disabled)
    [ 0.982981] type=2000 audit(1383877333.966:1): initialized
    [ 1.000018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.001570] zbud: loaded
    [ 1.001748] VFS: Disk quotas dquot_6.5.2
    [ 1.001801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.001998] msgmni has been set to 7672
    [ 1.002265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.002308] io scheduler noop registered
    [ 1.002311] io scheduler deadline registered
    [ 1.002344] io scheduler cfq registered (default)
    [ 1.002441] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
    [ 1.002526] pcieport 0000:00:1c.3: irq 57 for MSI/MSI-X
    [ 1.002598] pcieport 0000:00:1c.4: irq 58 for MSI/MSI-X
    [ 1.002681] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 1.002684] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 1.002688] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 1.002706] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 1.002708] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 1.002712] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 1.002728] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 1.002730] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 1.002734] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 1.002751] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.002769] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.002888] efifb: probing for efifb
    [ 1.003509] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90020e00000, using 4160k, total 4160k
    [ 1.003511] efifb: mode is 1366x768x32, linelength=5504, pages=1
    [ 1.003513] efifb: scrolling: redraw
    [ 1.003515] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.007477] Console: switching to colour frame buffer device 170x48
    [ 1.011265] fb0: EFI VGA frame buffer device
    [ 1.011272] intel_idle: MWAIT substates: 0x11142120
    [ 1.011274] intel_idle: v0.4 model 0x45
    [ 1.011275] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.011336] GHES: HEST is not enabled!
    [ 1.011398] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.011946] Linux agpgart interface v0.103
    [ 1.012027] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.032274] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.032308] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.032411] mousedev: PS/2 mouse device common for all mice
    [ 1.032672] rtc_cmos 00:04: RTC can wake from S4
    [ 1.032819] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.032857] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.032871] Intel P-state driver initializing.
    [ 1.032884] Intel pstate controlling: cpu 0
    [ 1.032911] Intel pstate controlling: cpu 1
    [ 1.032923] Intel pstate controlling: cpu 2
    [ 1.032935] Intel pstate controlling: cpu 3
    [ 1.033105] cpuidle: using governor ladder
    [ 1.033295] cpuidle: using governor menu
    [ 1.033356] drop_monitor: Initializing network drop monitor service
    [ 1.033431] TCP: cubic registered
    [ 1.033524] NET: Registered protocol family 10
    [ 1.033688] NET: Registered protocol family 17
    [ 1.033697] Key type dns_resolver registered
    [ 1.033905] PM: Hibernation image not present or could not be loaded.
    [ 1.033915] registered taskstats version 1
    [ 1.034407] Magic number: 5:662:358
    [ 1.034483] rtc_cmos 00:04: setting system clock to 2013-11-08 02:22:14 UTC (1383877334)
    [ 1.035212] Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    [ 1.035213] Write protecting the kernel read-only data: 8192k
    [ 1.037442] Freeing unused kernel memory: 1084K (ffff8800024f1000 - ffff880002600000)
    [ 1.038163] Freeing unused kernel memory: 352K (ffff8800027a8000 - ffff880002800000)
    [ 1.045866] systemd-udevd[57]: starting version 208
    [ 1.050291] [drm] Initialized drm 1.1.0 20060810
    [ 1.053926] [drm] radeon kernel modesetting enabled.
    [ 1.053955] checking generic (b0000000 410000) vs hw (a0000000 10000000)
    [ 1.053962] radeon 0000:03:00.0: enabling device (0000 -> 0003)
    [ 1.054153] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x05EA).
    [ 1.054190] [drm] register mmio base: 0xC0500000
    [ 1.054191] [drm] register mmio size: 262144
    [ 1.055856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.982382] tsc: Refined TSC clocksource calibration: 2294.688 MHz
    [ 2.566653] ATOM BIOS: Dell
    [ 2.566668] [drm] GPU not posted. posting now...
    [ 2.570040] radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
    [ 2.570042] radeon 0000:03:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
    [ 2.570044] [drm] Detected VRAM RAM=1024M, BAR=256M
    [ 2.570045] [drm] RAM width 64bits DDR
    [ 2.570094] [TTM] Zone kernel: Available graphics memory: 1965320 kiB
    [ 2.570095] [TTM] Initializing pool allocator
    [ 2.570099] [TTM] Initializing DMA pool allocator
    [ 2.570117] [drm] radeon: 1024M of VRAM memory ready
    [ 2.570118] [drm] radeon: 512M of GTT memory ready.
    [ 2.570129] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 2.570456] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
    [ 2.570460] [drm] PCIE gen 2 link speeds already enabled
    [ 2.570620] [drm] Loading HAINAN Microcode
    [ 2.981834] Switched to clocksource tsc
    [ 2.993997] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 2.994098] radeon 0000:03:00.0: WB enabled
    [ 2.994100] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880156e63c00
    [ 2.994102] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880156e63c04
    [ 2.994103] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880156e63c08
    [ 2.994104] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880156e63c0c
    [ 2.994106] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880156e63c10
    [ 2.994107] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.994108] [drm] Driver supports precise vblank timestamp query.
    [ 2.994126] radeon 0000:03:00.0: irq 59 for MSI/MSI-X
    [ 2.994137] radeon 0000:03:00.0: radeon: using MSI.
    [ 2.994157] [drm] radeon: irq initialized.
    [ 3.013688] [drm] ring test on 0 succeeded in 1 usecs
    [ 3.013694] [drm] ring test on 1 succeeded in 1 usecs
    [ 3.013698] [drm] ring test on 2 succeeded in 1 usecs
    [ 3.013761] [drm] ring test on 3 succeeded in 2 usecs
    [ 3.013770] [drm] ring test on 4 succeeded in 1 usecs
    [ 3.015377] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 3.015424] [drm] ib test on ring 1 succeeded in 0 usecs
    [ 3.015476] [drm] ib test on ring 2 succeeded in 0 usecs
    [ 3.015496] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 3.015517] [drm] ib test on ring 4 succeeded in 1 usecs
    [ 3.015656] [drm] Radeon Display Connectors
    [ 3.015663] [drm] Internal thermal controller without fan control
    [ 3.015712] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
    [ 3.015739] == power state 0 ==
    [ 3.015740] ui class: none
    [ 3.015742] internal class: boot
    [ 3.015744] caps:
    [ 3.015746] uvd vclk: 0 dclk: 0
    [ 3.015748] power level 0 sclk: 30000 mclk: 29900 vddc: 900 vddci: 0 pcie gen: 2
    [ 3.015749] status: c r b
    [ 3.015752] == power state 1 ==
    [ 3.015753] ui class: performance
    [ 3.015754] internal class: none
    [ 3.015756] caps:
    [ 3.015758] uvd vclk: 0 dclk: 0
    [ 3.015760] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
    [ 3.015761] power level 1 sclk: 40000 mclk: 90000 vddc: 875 vddci: 0 pcie gen: 2
    [ 3.015763] power level 2 sclk: 75000 mclk: 90000 vddc: 950 vddci: 0 pcie gen: 2
    [ 3.015765] power level 3 sclk: 90000 mclk: 90000 vddc: 1025 vddci: 0 pcie gen: 2
    [ 3.015767] power level 4 sclk: 97500 mclk: 90000 vddc: 1075 vddci: 0 pcie gen: 2
    [ 3.015768] status:
    [ 3.015769] == power state 2 ==
    [ 3.015771] ui class: battery
    [ 3.015772] internal class: none
    [ 3.015773] caps:
    [ 3.015775] uvd vclk: 0 dclk: 0
    [ 3.015777] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
    [ 3.015778] power level 1 sclk: 40000 mclk: 60000 vddc: 850 vddci: 0 pcie gen: 2
    [ 3.015780] power level 2 sclk: 40000 mclk: 60000 vddc: 850 vddci: 0 pcie gen: 2
    [ 3.015781] status:
    [ 3.023133] switching from power state:
    [ 3.023135] ui class: none
    [ 3.023136] internal class: boot
    [ 3.023138] caps:
    [ 3.023139] uvd vclk: 0 dclk: 0
    [ 3.023141] power level 0 sclk: 30000 mclk: 29900 vddc: 900 vddci: 0 pcie gen: 2
    [ 3.023142] status: c b
    [ 3.023143] switching to power state:
    [ 3.023144] ui class: performance
    [ 3.023145] internal class: none
    [ 3.023147] caps:
    [ 3.023148] uvd vclk: 0 dclk: 0
    [ 3.023149] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
    [ 3.023151] power level 1 sclk: 40000 mclk: 90000 vddc: 875 vddci: 0 pcie gen: 2
    [ 3.023152] power level 2 sclk: 75000 mclk: 90000 vddc: 950 vddci: 0 pcie gen: 2
    [ 3.023154] power level 3 sclk: 90000 mclk: 90000 vddc: 1025 vddci: 0 pcie gen: 2
    [ 3.023155] power level 4 sclk: 97500 mclk: 90000 vddc: 1075 vddci: 0 pcie gen: 2
    [ 3.023156] status: r
    [ 3.024470] [drm] radeon: dpm initialized
    [ 3.024475] radeon 0000:03:00.0: No connectors reported connected with modes
    [ 3.024477] [drm] Cannot find any crtc or sizes - going 1024x768
    [ 3.026968] [drm] fb mappable at 0xA1150000
    [ 3.026970] [drm] vram apper at 0xA0000000
    [ 3.026971] [drm] size 3145728
    [ 3.026972] [drm] fb depth is 24
    [ 3.026973] [drm] pitch is 4096
    [ 3.026976] checking generic (b0000000 410000) vs hw (a0000000 10000000)
    [ 3.027040] radeon 0000:03:00.0: fb1: radeondrmfb frame buffer device
    [ 3.027042] radeon 0000:03:00.0: registered panic notifier
    [ 3.027053] [drm] Initialized radeon 2.34.0 20080528 for 0000:03:00.0 on minor 0
    [ 3.027978] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
    [ 3.028026] ACPI: Lid Switch [LID0]
    [ 3.028063] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
    [ 3.028066] ACPI: Power Button [PWRB]
    [ 3.028114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 3.028116] ACPI: Power Button [PWRF]
    [ 3.031882] [drm] Memory usable by graphics device = 2048M
    [ 3.031886] checking generic (b0000000 410000) vs hw (b0000000 10000000)
    [ 3.031888] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 3.031900] Console: switching to colour dummy device 80x25
    [ 3.031959] i915 0000:00:02.0: setting latency timer to 64
    [ 3.056716] i915 0000:00:02.0: irq 60 for MSI/MSI-X
    [ 3.056723] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.056724] [drm] Driver supports precise vblank timestamp query.
    [ 3.056784] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 3.101180] fbcon: inteldrmfb (fb0) is primary device
    [ 4.361087] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4.707482] Console: switching to colour frame buffer device 170x48
    [ 4.712160] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 4.712553] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 4.713578] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
    [ 4.713584] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff880159325d98), AE_NOT_FOUND (20130517/psparse-536)
    [ 4.713871] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
    [ 4.713930] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input4
    [ 4.715381] acpi device:55: registered as cooling_device0
    [ 4.715415] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.715455] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
    [ 4.715487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
    [ 4.738967] ACPI: bus type USB registered
    [ 4.738999] usbcore: registered new interface driver usbfs
    [ 4.739016] usbcore: registered new interface driver hub
    [ 4.739050] usbcore: registered new device driver usb
    [ 4.739638] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 4.739642] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 4.739649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 4.739721] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 4.739741] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
    [ 4.740145] xHCI xhci_add_endpoint called for root hub
    [ 4.740148] xHCI xhci_check_bandwidth called for root hub
    [ 4.740208] hub 1-0:1.0: USB hub found
    [ 4.740218] hub 1-0:1.0: 9 ports detected
    [ 4.741007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 4.741164] ehci-pci: EHCI PCI platform driver
    [ 4.742756] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 4.742760] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 4.743091] xHCI xhci_add_endpoint called for root hub
    [ 4.743093] xHCI xhci_check_bandwidth called for root hub
    [ 4.743135] hub 2-0:1.0: USB hub found
    [ 4.743141] hub 2-0:1.0: 4 ports detected
    [ 4.743425] SCSI subsystem initialized
    [ 4.745035] ACPI: bus type ATA registered
    [ 4.745122] libata version 3.00 loaded.
    [ 4.747867] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 4.747875] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 4.747880] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 4.747891] ehci-pci 0000:00:1d.0: debug port 2
    [ 4.751784] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 4.751800] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000
    [ 4.760774] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 4.760925] hub 3-0:1.0: USB hub found
    [ 4.760930] hub 3-0:1.0: 2 ports detected
    [ 4.761082] ahci 0000:00:1f.2: version 3.0
    [ 4.761230] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
    [ 4.774140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
    [ 4.774146] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
    [ 4.774151] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.774614] scsi0 : ahci
    [ 4.774722] scsi1 : ahci
    [ 4.774798] scsi2 : ahci
    [ 4.774868] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 62
    [ 4.774871] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 62
    [ 4.774873] ata3: DUMMY
    [ 5.067345] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 5.094002] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.094032] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 5.099568] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD12, max UDMA/100
    [ 5.100914] ata2.00: configured for UDMA/100
    [ 5.129572] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
    [ 5.129577] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 5.191169] hub 3-1:1.0: USB hub found
    [ 5.191237] hub 3-1:1.0: 8 ports detected
    [ 5.255854] ata1.00: configured for UDMA/133
    [ 5.256061] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
    [ 5.261341] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD12 PQ: 0 ANSI: 5
    [ 5.263686] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 5.263691] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 5.263724] sd 0:0:0:0: [sda] Write Protect is off
    [ 5.263727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.263737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.269320] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 5.269323] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 5.269521] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 5.332482] sda: sda1 sda2
    [ 5.333235] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 5.457253] usb 3-1.7: new high-speed USB device number 3 using ehci-pci
    [ 5.549500] device-mapper: uevent: version 1.0.3
    [ 5.549652] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
    [ 5.554331] bio: create slab <bio-1> at 1
    [ 5.607167] usb 3-1.8: new high-speed USB device number 4 using ehci-pci
    [ 6.510287] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.581705] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 7.582431] systemd[1]: Set hostname to <archins3537>.
    [ 8.087615] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 8.087670] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 8.087682] systemd[1]: Starting Login Prompts.
    [ 8.087692] systemd[1]: Reached target Login Prompts.
    [ 8.087700] systemd[1]: Starting Remote File Systems.
    [ 8.087707] systemd[1]: Reached target Remote File Systems.
    [ 8.087715] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 8.087736] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 8.087743] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 8.087762] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 8.087769] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 8.087789] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 8.087796] systemd[1]: Starting Delayed Shutdown Socket.
    [ 8.087813] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 8.087822] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 8.087851] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 8.087858] systemd[1]: Starting Paths.
    [ 8.087865] systemd[1]: Reached target Paths.
    [ 8.087878] systemd[1]: Starting udev Kernel Socket.
    [ 8.087895] systemd[1]: Listening on udev Kernel Socket.
    [ 8.087904] systemd[1]: Starting udev Control Socket.
    [ 8.087920] systemd[1]: Listening on udev Control Socket.
    [ 8.087944] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 8.088034] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 8.088043] systemd[1]: Starting Encrypted Volumes.
    [ 8.088051] systemd[1]: Reached target Encrypted Volumes.
    [ 8.088059] systemd[1]: Starting Journal Socket.
    [ 8.088098] systemd[1]: Listening on Journal Socket.
    [ 8.094096] systemd[1]: Started Set Up Additional Binary Formats.
    [ 8.146808] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 8.147345] systemd[1]: Starting udev Coldplug all Devices...
    [ 8.147641] systemd[1]: Starting Setup Virtual Console...
    [ 8.156662] systemd[1]: Started Load Kernel Modules.
    [ 8.156702] systemd[1]: Mounted FUSE Control File System.
    [ 8.156719] systemd[1]: Mounting Debug File System...
    [ 8.160118] systemd[1]: Starting Apply Kernel Variables...
    [ 8.160456] systemd[1]: Mounting POSIX Message Queue File System...
    [ 8.160770] systemd[1]: Mounting Configuration File System...
    [ 8.161235] systemd[1]: Starting Journal Service...
    [ 8.161549] systemd[1]: Started Journal Service.
    [ 8.407759] systemd-journald[153]: Vacuuming done, freed 0 bytes
    [ 8.622532] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 8.834003] systemd-udevd[177]: starting version 208
    [ 9.449711] ACPI: Requesting acpi_cpufreq
    [ 9.652388] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
    [ 9.652512] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
    [ 9.703295] ACPI: AC Adapter [ACAD] (off-line)
    [ 9.734702] wmi: Mapper loaded
    [ 9.767167] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 9.900528] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
    [ 9.914682] ACPI: Battery Slot [BAT1] (battery present)
    [ 9.946497] hda_codec: invalid CONNECT_LIST verb 5[1]:0
    [ 9.946555] hda_codec: invalid CONNECT_LIST verb 6[1]:0
    [ 9.946621] hda_codec: invalid CONNECT_LIST verb 7[1]:0
    [ 9.948456] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
    [ 9.948585] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
    [ 9.948656] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
    [ 9.953096] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [ 9.953371] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
    [ 9.953378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.953384] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
    [ 9.953388] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
    [ 9.953392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.953394] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
    [ 9.953398] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
    [ 9.953402] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130517/utaddress-251)
    [ 9.953406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.953407] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 9.953792] mei_me 0000:00:16.0: setting latency timer to 64
    [ 9.953838] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
    [ 9.956390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 9.956608] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
    [ 9.956615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 10.231648] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 10.250684] cfg80211: Calling CRDA to update world regulatory domain
    [ 10.307646] input: Dell WMI hotkeys as /devices/virtual/input/input11
    [ 10.310649] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
    [ 10.313166] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
    [ 10.313536] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
    [ 10.313923] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 10.347294] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 10.347309] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 10.347544] r8169 0000:01:00.0: irq 66 for MSI/MSI-X
    [ 10.347727] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90022cee000, 74:86:7a:50:ce:f4, XID 04900000 IRQ 66
    [ 10.381911] iTCO_vendor_support: vendor-support=0
    [ 10.393283] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 10.393324] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 10.393578] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.400848] systemd-udevd[183]: renamed network interface eth0 to enp1s0
    [ 10.416483] ath: EEPROM regdomain: 0x60
    [ 10.416486] ath: EEPROM indicates we should expect a direct regpair map
    [ 10.416489] ath: Country alpha2 being used: 00
    [ 10.416490] ath: Regpair used: 0x60
    [ 10.614808] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 10.615079] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90035180000, irq=19
    [ 10.643067] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 10.643619] systemd-udevd[189]: renamed network interface wlan0 to wlp2s0
    [ 10.646589] scsi3 : SCSI emulation for RTS5139 USB card reader
    [ 10.646742]

    Cdh wrote:
    You didn't give much information so...
    Blacklisting is now done via /etc/modprobe.d/*.conf files
    For example:
    /etc/modprobe.d/disable-radeon.conf would contain
    install radeon /bin/false
    You can also write "blacklist radeon" instead but that only prevents loading it automatically on itself while booting. You can still modprobe it and if it is a dependency of an automatically loaded module it will still get loaded. With the install ... /bin/false there is no way to load it.
    Also you need to make sure that it is not in the modules array in /etc/mkinitcpio.conf (or that your disable-radeon.conf is in the files array) because the initramfs is its own mini-system that doesn't know about the module configuration otherwise.
    but thats the problem ! i need radeon module to start because vgaswitcheroo needs it ! and then trun it off because 'I' dont need it ! anyway i ll give 'bin/false' method a try !

  • Problem with installing nvidia drivers, like to keep existing kernel *

    Hi All
    I download and install the NVIDIA-Linux-x86-173.14.12-pkg1.run from the nvidia web site because when I try to download from pacman
    it said the following
    [rombel@marclinux ~]$ sudo pacman -S nvidia-173xx
    resolving dependencies...
    looking for inter-conflicts...
    :: nvidia-173xx-utils conflicts with libgl. Remove libgl? [Y/n] y
    Remove (1): libgl-7.2-1 
    Total Removed Size:   2.75 MB
    Targets (8): klibc-1.5.15-1  klibc-extras-2.5-2  klibc-udev-135-2  filesystem-2009.01-1  mkinitcpio-0.5.23-1  kernel26-2.6.28.5-1  nvidia-173xx-utils-173.14.12-1 
                 nvidia-173xx-173.14.12-3 
    Total Download Size:    27.97 MB
    Total Installed Size:   137.78 MB
    so you see it want to upgrade my kernel which I dont want. because my kile and k3b programs gives Segmentation fault when i try to start them.
    However after installing miro i start to get  Xlib: extension "GLX" missing on display ":0 error. See below a copy of my rc.conf, xorg, section of the /var/log/Xorg.0.log files  and error messages from running glxinfo and glxgears.
    Message from the /var/log/Xorg.0.log
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    dlopen: /usr/lib/xorg/modules/extensions//libglx.so: cannot open shared object file: No such file or directory
    (EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
    (II) UnloadModule: "glx"
    (EE) Failed to load module "glx" (loader failed, 7)
    (II) LoadModule: "dbe"
    (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    (EE) NVIDIA(0): you continue to encounter problems, Please try
    (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    (II) NVIDIA(0): NVIDIA GPU GeForce FX Go5200 (NV34) at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 32768 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.34.20.42.c1
    [u]My xorg file[/u]
    Section "Module"
    Load "extmod"
    Load "glx"
    Load "dbe"
    # Load "record"
    Load "xtrap"
    Load "freetype"
    Load "synaptics"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "SWcursor" # [<bool>]
    #Option "HWcursor" # [<bool>]
    #Option "NoAccel" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "Rotate" # [<str>]
    #Option "VideoKey" # <i>
    #Option "FlatPanel" # [<bool>]
    #Option "FPDither" # [<bool>]
    #Option "CrtcNumber" # <i>
    #Option "FPScale" # [<bool>]
    #Option "FPTweak" # <i>
    #Option "DualHead" # [<bool>]
    Option "AllowGLXWithComposite" "True"
    #Driver "nv"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "NV34M [GeForce FX Go5200 64M]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "NoLogo" "True"
    Option "RenderAccel" "True"
    Option "AddARGBGVisuals" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "NvAGP" "3"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1680x1050"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    [rombel@marclinux ~]$ glxgears
    Xlib: extension "GLX" missing on display ":0.0".
    Error: couldn't get an RGB, Double-buffered visual
    [rombel@marclinux ~]$ glxinfo
    name of display: :0.0
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Error: couldn't find RGB GLX visual or fbconfig
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    Xlib: extension "GLX" missing on display ":0.0".
    3 GLXFBConfigs:
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    Segmentation fault
    My rc.conf file
    MOD_AUTOLOAD="yes"
    MOD_BLACKLIST=(intel_agp) #deprecated
    MODULES=(b44 mii ipw2100 ac97_bus snd-mixer-oss acpi-cpufreq snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd autofs4 snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore nvidia )
    I have google and read some of the forums with machine of similar problems. ANY HELP PLEASE.
    Last edited by B (2009-02-16 20:53:47)

    Hi all
    I try to compile the package as you suggested but with no luck see the steps I did below:
    Note: in the PKBUILD file i change every instants of 2.6.28 to 2.6.25
    [rombel@marclinux ~]$ cd abs/
    [rombel@marclinux abs]$ ls
    nvidia-173xx
    [rombel@marclinux abs]$ cd nvidia-173xx/
    [rombel@marclinux nvidia-173xx]$ ls
    2.6.28.patch  NVIDIA_173.14.12_2.6.27.patch  PKGBUILD  nvidia.install
    [rombel@marclinux nvidia-173xx]$ nano PKGBUILD
    [rombel@marclinux nvidia-173xx]$ nano PKGBUILD
    This is the PKBUILD file
    # $Id: PKGBUILD 8436 2008-08-11 04:51:52Z tpowa $
    # Maintainer : Thomas Baechler <[email protected]>
    pkgname=nvidia-173xx
    pkgver=173.14.12
    _kernver='2.6.25-ARCH'
    pkgrel=3
    pkgdesc="NVIDIA legacy drivers for kernel26, 173xx branch"
    arch=('i686' 'x86_64')
    [ "$CARCH" = "i686"   ] && ARCH=x86
    [ "$CARCH" = "x86_64" ] && ARCH=x86_64
    url="http://www.nvidia.com/"
    depends=('kernel26>=2.6.25' 'kernel26<2.6.29' 'nvidia-173xx-utils')
    conflicts=('nvidia' 'nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
    license=('custom')
    install=nvidia.install
    source=(http://us.download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run
            NVIDIA_173.14.12_2.6.25.patch
        2.6.25.patch)
    md5sums=('76b8eba1b14fc273a1a4044705b0aa56'
             'cd4a68b5a88be6976b90cd0df6bfe89e'
             '460d52dc0a27d64f881cbacd1e7220b5')
    [ "$CARCH" = "x86_64" ] && md5sums=('8675e4ca65033b343c8c77b2ce82e71d'
                                        'cd4a68b5a88be6976b90cd0df6bfe89e'
                                        '460d52dc0a27d64f881cbacd1e7220b5')
    build()
      # Extract
      cd $startdir/src/
      sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
      cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
      # Any extra patches are applied in here...
      patch -Np1 -i ../NVIDIA_173.14.12_2.6.27.patch || return 1
      patch -Np0 -i ../2.6.25.patch || return 1
      cd usr/src/nv/
      ln -s Makefile.kbuild Makefile
      make SYSSRC=/lib/modules/${_kernver}/build module || return 1
      # install kernel module
      mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
      install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
      sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install
    [rombel@marclinux nvidia-173xx]$ makepkg -s
    ==> Making package: nvidia-173xx 173.14.12-3 i686 (Sun Feb 15 15:14:35 EST 2009)
    ==> Checking Runtime Dependencies...
    ==> Installing missing dependencies...
    Password:
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): nvidia-173xx-utils-173.14.12-1 
    Total Download Size:    0.00 MB
    Total Installed Size:   23.70 MB
    Proceed with installation? [Y/n] y
    checking package integrity...
    (1/1) checking for file conflicts                   [###################################################] 100%
    error: could not prepare transaction
    error: failed to commit transaction (conflicting files)
    nvidia-173xx-utils: /usr/bin/nvidia-bug-report.sh exists in filesystem
    nvidia-173xx-utils: /usr/bin/nvidia-settings exists in filesystem
    nvidia-173xx-utils: /usr/bin/nvidia-xconfig exists in filesystem
    nvidia-173xx-utils: /usr/lib/libGL.so.1 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libGL.so.173.14.12 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libGLcore.so.1 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libGLcore.so.173.14.12 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libXvMCNVIDIA.a exists in filesystem
    nvidia-173xx-utils: /usr/lib/libXvMCNVIDIA.so.173.14.12 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libXvMCNVIDIA_dynamic.so.1 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libnvidia-cfg.so.1 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libnvidia-cfg.so.173.14.12 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libnvidia-tls.so.1 exists in filesystem
    nvidia-173xx-utils: /usr/lib/libnvidia-tls.so.173.14.12 exists in filesystem
    nvidia-173xx-utils: /usr/lib/xorg/modules/drivers/nvidia_drv.so exists in filesystem
    nvidia-173xx-utils: /usr/lib/xorg/modules/extensions/libglx.so.173.14.12 exists in filesystem
    nvidia-173xx-utils: /usr/share/applications/nvidia-settings.desktop exists in filesystem
    Errors occurred, no packages were upgraded.
    ==> ERROR: Pacman failed to install missing dependencies.

  • Can I install nvidia quadro 600/ AMD FirePro V4900 (ATI FireGL) on HPE h8-1220t ?

    HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
    Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen. 
    Notes: Card spec
    nVIdia Quadro 600 by pny
    Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
    I contacted both HP and PNY customer support. They've not found any solution yet.
    Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
    I believe PCI slot should be backward compatible w/ 2.0 version. 
    Does it really matter install PCIe2.0 graphic board on 3.0 slot?
    My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
    However, I'm not sure wether it works with this machine.
    Please give me an answer.
    Kyoo

    masterqueue wrote:
    HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
    Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen. 
    Notes: Card spec
    nVIdia Quadro 600 by pny
    Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
    I contacted both HP and PNY customer support. They've not found any solution yet.
    Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
    I believe PCI slot should be backward compatible w/ 2.0 version. 
    Does it really matter install PCIe2.0 graphic board on 3.0 slot?
    My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
    However, I'm not sure wether it works with this machine.
    Please give me an answer.
    Kyoo
    Hello masterqueue.
    This desktop was a CTO (Configured-to-Order) model.  As such, there is a lot of information I do not know about the machine.  Most importantly, how large is the power supply?  According to the computer's specification page it could have anywhere from a 300 watt to a 600 watt power supply.  That is a very big difference.
    I'll keep an eye out for your response.  Have a great day.
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Ati Mobility HD 5470/Intel integrated hybrid graphics

    Hi! I have a Acer TimelineX 5820TZG laptop which has switchable graphics. I am struggling to make Arch work with my dual-graphics configuration, and I have tried a lot of things, but it doesn't work.
    Right now I am working with the Intel integrated graphics card but I am not even sure if the Ati is completely switched off (I am afraid it's not, as I read in a lot of posts about switchable graphics).
    The first thing I did is installing the open-source drivers for ati (xf86-video-ati) and intel (xf86-video-intel). First I tried to make both cards to work by using the vgaswitcheroo method, I mounted debugfs, modprobed the radeon module and using:
    cat /sys/kernel/debug/vgaswitcheroo/switch
    I checked that the currently working card is the Intel integrated. I made sure the ATI is switched off by doing
    echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
    (As explained in the wiki for hybrid graphics) and then started the X server. In this case the X server starts and sometimes even starts loading my WM (kde), but eventually the system gets frozen and all I can see is warning messages in the terminal (CPU #1 stuck for 23s!) and I am unable to use another terminal with Ctrl+Alt+Fx or soft-resetting. Some times it gets stuck on a loop, showing a lot of messages in the terminal and not allowing me to kill the process in any way.
    Then I tried modprobing 'radeon' and then using
    echo DDIC > /sys/kernel/debug/vgaswitcheroo/switch
    to enable the dedicated graphics card (Ati) and turning off the integrated one (intel) to see what happens. In this case the X server simply crashes, leaving me with the following log:
    187.209]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 187.211] X Protocol Version 11, Revision 0
    [ 187.213] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 187.214] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
    [ 187.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
    [ 187.218] Build Date: 29 December 2014 01:09:58PM
    [ 187.219]
    [ 187.220] Current version of pixman: 0.32.6
    [ 187.223] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 187.223] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 187.228] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 16:17:27 2015
    [ 187.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 187.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 187.276] (==) No Layout section. Using the first Screen section.
    [ 187.276] (==) No screen section available. Using defaults.
    [ 187.276] (**) |-->Screen "Default Screen Section" (0)
    [ 187.276] (**) | |-->Monitor "<default monitor>"
    [ 187.277] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 187.277] (==) Automatically adding devices
    [ 187.277] (==) Automatically enabling devices
    [ 187.277] (==) Automatically adding GPU devices
    [ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 187.277] Entry deleted from font path.
    [ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 187.277] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 187.277] Entry deleted from font path.
    [ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 187.277] Entry deleted from font path.
    [ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 187.277] Entry deleted from font path.
    [ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 187.277] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 187.277] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 187.277] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 187.277] (II) Loader magic: 0x818d80
    [ 187.277] (II) Module ABI versions:
    [ 187.277] X.Org ANSI C Emulation: 0.4
    [ 187.277] X.Org Video Driver: 18.0
    [ 187.277] X.Org XInput driver : 21.0
    [ 187.277] X.Org Server Extension : 8.0
    [ 187.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 187.280] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 187.281] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
    [ 187.281] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 187.282] (EE) systemd-logind: failed to take device /dev/dri/card0: Invalid argument
    [ 187.283] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
    [ 187.283] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
    [ 187.284] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 187.284] (II) LoadModule: "glx"
    [ 187.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 187.504] (II) Module glx: vendor="X.Org Foundation"
    [ 187.504] compiled for 1.16.3, module version = 1.0.0
    [ 187.504] ABI class: X.Org Server Extension, version 8.0
    [ 187.504] (==) AIGLX enabled
    [ 187.504] (==) Matched ati as autoconfigured driver 0
    [ 187.504] (==) Matched intel as autoconfigured driver 1
    [ 187.504] (==) Matched modesetting as autoconfigured driver 2
    [ 187.504] (==) Matched fbdev as autoconfigured driver 3
    [ 187.504] (==) Matched vesa as autoconfigured driver 4
    [ 187.504] (==) Assigned the driver to the xf86ConfigLayout
    [ 187.504] (II) LoadModule: "ati"
    [ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 187.504] (II) Module ati: vendor="X.Org Foundation"
    [ 187.504] compiled for 1.16.1, module version = 7.5.0
    [ 187.504] Module class: X.Org Video Driver
    [ 187.504] ABI class: X.Org Video Driver, version 18.0
    [ 187.504] (II) LoadModule: "radeon"
    [ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 187.504] (II) Module radeon: vendor="X.Org Foundation"
    [ 187.504] compiled for 1.16.1, module version = 7.5.0
    [ 187.504] Module class: X.Org Video Driver
    [ 187.504] ABI class: X.Org Video Driver, version 18.0
    [ 187.504] (II) LoadModule: "intel"
    [ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 187.505] (II) Module intel: vendor="X.Org Foundation"
    [ 187.505] compiled for 1.16.3, module version = 2.99.917
    [ 187.505] Module class: X.Org Video Driver
    [ 187.505] ABI class: X.Org Video Driver, version 18.0
    [ 187.505] (II) LoadModule: "modesetting"
    [ 187.600] (WW) Warning, couldn't open module modesetting
    [ 187.601] (II) UnloadModule: "modesetting"
    [ 187.601] (II) Unloading modesetting
    [ 187.601] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 187.601] (II) LoadModule: "fbdev"
    [ 187.601] (WW) Warning, couldn't open module fbdev
    [ 187.601] (II) UnloadModule: "fbdev"
    [ 187.601] (II) Unloading fbdev
    [ 187.601] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 187.601] (II) LoadModule: "vesa"
    [ 187.601] (WW) Warning, couldn't open module vesa
    [ 187.601] (II) UnloadModule: "vesa"
    [ 187.601] (II) Unloading vesa
    [ 187.601] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 187.601] (II) RADEON: Driver for ATI Radeon chipsets:
    <LIST OF CARDS>
    [ 187.606] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 187.607] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 187.607] (++) using VT number 1
    [ 187.607] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 187.607] (II) [KMS] Kernel modesetting enabled.
    [ 187.666] (EE) No devices detected.
    [ 187.666] (EE)
    Fatal server error:
    [ 187.666] (EE) no screens found(EE)
    [ 187.666] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 187.666] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 187.666] (EE)
    As it didn't work this way, I tried using the closed-source driver for ATI, the one in the Vi0L0 repository. I created the xorg.conf file using aticonfig --initial as suggested in the wiki. the result was Xserver crashing again, leaving me with the following log (which suggests that my system is not compatible with PxP tech by AMD and that I should not use the  fglrx driver).
    [ 2455.881]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 2455.885] X Protocol Version 11, Revision 0
    [ 2455.887] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 2455.888] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
    [ 2455.888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
    [ 2455.891] Build Date: 29 December 2014 01:09:58PM
    [ 2455.892]
    [ 2455.893] Current version of pixman: 0.32.6
    [ 2455.896] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2455.896] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2455.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 19:38:17 2015
    [ 2455.903] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2455.904] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2455.906] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2455.906] (==) ServerLayout "aticonfig Layout"
    [ 2455.906] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2455.906] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2455.906] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2455.906] (==) Automatically adding devices
    [ 2455.906] (==) Automatically enabling devices
    [ 2455.906] (==) Automatically adding GPU devices
    [ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 2455.906] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2455.906] Entry deleted from font path.
    [ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2455.906] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2455.906] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2455.906] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2455.906] (II) Loader magic: 0x818d80
    [ 2455.906] (II) Module ABI versions:
    [ 2455.906] X.Org ANSI C Emulation: 0.4
    [ 2455.906] X.Org Video Driver: 18.0
    [ 2455.906] X.Org XInput driver : 21.0
    [ 2455.906] X.Org Server Extension : 8.0
    [ 2455.910] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 2455.910] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2455.911] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2455.913] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
    [ 2455.913] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
    [ 2455.913] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2455.913] (II) "glx" will be loaded by default.
    [ 2455.913] (II) LoadModule: "glx"
    [ 2455.913] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2455.913] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2455.913] compiled for 6.9.0, module version = 1.0.0
    [ 2455.913] (II) LoadModule: "fglrx"
    [ 2455.913] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2455.943] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2455.943] compiled for 1.4.99.906, module version = 14.50.2
    [ 2455.943] Module class: X.Org Video Driver
    [ 2455.944] (II) Loading sub module "fglrxdrm"
    [ 2455.944] (II) LoadModule: "fglrxdrm"
    [ 2455.944] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2455.944] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2455.944] compiled for 1.4.99.906, module version = 14.50.2
    [ 2455.944] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
    [ 2455.944] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003
    [ 2455.944] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
    [ 2455.944] (++) using VT number 2
    [ 2455.944] (--) controlling tty is VT number 2, auto-enabling KeepTty
    [ 2455.944] (WW) Falling back to old probe method for fglrx
    [ 2455.959] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 2456.127] ukiDynamicMajor: found major device number 249
    [ 2456.127] ukiDynamicMajor: found major device number 249
    [ 2456.127] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 2456.127] ukiOpenDevice: node name is /dev/ati/card0
    [ 2456.127] ukiOpenDevice: open result is 11, (OK)
    [ 2461.962] ukiOpenDevice: open result is 11, (OK)
    [ 2461.963] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2461.963] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 2461.965] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
    [ 2461.965] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 2461.965] (II) fglrx: intel VGA device detected, load intel driver.
    [ 2461.966] (II) LoadModule: "intel"
    [ 2461.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2461.966] (II) Module intel: vendor="X.Org Foundation"
    [ 2461.966] compiled for 1.16.3, module version = 2.99.917
    [ 2461.966] Module class: X.Org Video Driver
    [ 2461.966] ABI class: X.Org Video Driver, version 18.0
    [ 2461.966] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
    [ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
    [ 2461.966] (EE) No devices detected.
    [ 2461.966] (EE)
    Fatal server error:
    [ 2461.966] (EE) no screens found(EE)
    [ 2461.966] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2461.966] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2461.966] (EE)
    So I came back to open-source drivers and right now I am working with radeon driver blacklisted and only using the intel driver, but as the radeon is blacklisted, vgaswitcheroo is not created and I don't know if mi ATI card is completely switched off.
    As you can see, I have done the stuff suggested in the Acer TimelineX wiki page and it didn't work. I have also tried some other suggested actions I found but still can't get my switchable graphics to work.
    I would really like to get both my cards to work completely, so I can switch graphics and restart the X server to get better performance or enhance my batt life depending on which GPU I am using; but at this point I am just fine with turning off the ATI card completely and just work with the intel one (though if there is a method for making both work, I prefer that than just turning a card off).
    Sorry for my english!!

    Xabre wrote:
    Bit offtopic, but when you see a sentence like this:
    [  2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
    how can you expect anything from the driver?
    You are right, that's why I said that it suggest that my system is not compatible with fglrx. I don't understand why the warning just before that error line says that I should uninstall fglrx because my system is Muxed and that line says that my system is muxless...
    Anyways, it doesn't matter, the fact is that fglrx doesn't work, so I will be using the open-source drivers...

  • Installed Nvidia Driver Problems?

    I recently installed Nvidia Ge-Force 5200FX Driver onto my computer and it changes my video bit from 16-Bit to 4-Bit and i cant change back anyone know how i can change it back without uninstalling the driver.

    There is one thing you do not seem to have understood so far:  This forum is not a general hardware forum but offers help and advice for MSI Retail products only.  You were using an MSI MS-6590 KT6 Delta mainboard in your other thread.  That is the only reason why we replied to your questions about an unknown video card model in the first place (even though the lack of a video driver for an unknow card has not much to do with your mainboard.
    Now you are asking us about some NVIDIA driver issue regarding the "same type of [non-MSI] graphics card" but in a "different computer".  You provided no useful information about your system configuration whatsoever (no information about your operating system, no information about the exact driver version, no information about why you installed an NVIDIA driver even though the unknow video card seems to be an old ATI model, etc.)  I see nothing that relates to any MSI Retail product in the context of your driver question.  I am locking this topic.
    If you find one reason why I should re-open your topic and not advise you to look for help in a general hardware forum (there are tons of those out there on the net) write me a PM and tell me what this has to do with MSI Retail products.  I will than gladly unlock this thread.  Until then:
    __ TOPIC LOCKED __

Maybe you are looking for

  • "ASSERT Condition" Error

    Hi, In my earlier thread, had mentioned about developing an application with 2 views, view1 and view2. This was working fine. After this I added a pop-up attribute in view2 ref to IF_WD_WINDOW. Also added an action OK in view2. Didnt write any furthe

  • How do I view photos/video

    Gidday I have an SD card with photos/video taken on a digital camera. What do I need to install so I can view them on a Tungsten T2? Can anyone help please? Cheers Glenn

  • Dynamic Parallel Approval for HCM Process and Forms

    Hi everyone, I have a scenario where I need to use the "Dynamic Parallel Approval" (or to keep it simple, initially I tried using the "Parallel Approval" wizard)for a workflow used in the HCM Process and Forms. The standard task for approval in proce

  • Auto mount of USB sticks and hard drives?

    Hello. I'd like ArchLinux to auto-mount USB sticks, hard drives, etc... when plugging them in. How do I manage to do this? These are my daemons: DAEMONS=(syslog-ng network netfs crond dbus hal ntpd alsa gdm) Thank you in advance. EDIT: Somehow, autof

  • Mail app crashes before opening

    Hello, My mail app keeps crashing and I can't figure out why. Here's the crash log; Process: Mail [3818] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 4.3 (1081) Build Info: Mail-10810000~1 Code Type: X86-64 (Na