Download/Install Support Package

Hi,
I have a basic question about Support Package. Do I have to be either SAP partner or customer to download Support Package? Thanks,
Lydia

Hi Lydia,
Yes, you have to be a customer to download the support packages.Actually customers will have accounts.Using this account we can get access keys,download support packages etc.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Similar Messages

Knowing installed support package version of Compliance Calibrator ??

Hi all,
We have Compliance Calibrator 5.1 in WAS 7.0, and we would want to know the installed support package... How to know ?
in CC, when clicking on "About" we just have the CC version ("5.1").
On the J2EE server System Information for the component ccappcomp, we just have "null (0.2007.03.09.15.22.41)".
It looks like SP3 but how to be sure ?
Thanks in advance...

Vincent,
I believe that you can get this information in the NetWeaver Software Deployment Manager (SDM). If I remember correctly the AE/CC packages are deployed using this tool. SDM has version information for all J2EE deployed software packages.
You can find the SDM under /usr/sap/<SID>/DVEBMGS00/SDM (for Unix systems).
Best of luck.
Matthew

Installing support package 16, 17 and 18 for Netwever 7.0 (ECC 6 EHP 3 )

Hi I just want to know if we can directly load SP for Netweaver 7.00. I just went through some doc but they said we can upload SP directyl from SPAM tcode. can we install it from SPAM tcode i have component SAP_BASIS SP 16, 17 and 18. i downloaded SP using Solution manager i am at implementation phase in the same. i am bit confused should i proceed with SPAM ( but i tried upload package option is greyed out there).
any suggestion will be appreciated.
Mani

Hi Mani,
Follow this,
http://help.sap.com/saphelp_nw70/helpdata/EN/a7/a7a932845c11d2b421006094b9ea64/frameset.htm
- 000 client
- modifiable status of client.
- don't use DDIC/SAP*, use a user with full authorization
Question on Appying NW Support Package Stack
Please note that both individual Support Packages and SP Stacks are Non-cumulative. This means that, when you import Support Packages, then you import a gap less series of Support Packages and, if
you use SP Stacks, you also import these without a gap. The only exception is the Support Package for SPAM itself. & Java support packages which comes in SCA format.
Uday, Did you try to copy from what I posted?.. the correct procedure would be to direct to the original link.. not CTRLC & CTRLV!
Regards,
Debasis.
Edited by: Debasis Sahoo on Apr 22, 2009 1:04 PM

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

Blocked Object Installing Support Package

Hello,
I am tryng to install suport packages with SPAM and i´ve an object that is bloking the process.
I´ve checked and the order is already released.
I´ve cheked SPAU and its ok.
I´ve checked se03 and unloked the order but when i go to spam again the order is still blocked.
Can You well Me?
Thank You very much

Either of them
1. There is a transport request which has not released.
2. Do the adjust modification from the SPAM.

Installing Addon Support package (ST-A/PI)

Hello,
Our Earlywatch report is shouting about needing to upgrade ST-A/PI.
So I've used Maintenance Optimizer to download the package, placed it in EPS/in and un-carred the file.
Then I've then gone to SPAM and tried "Support Package > Load Package > from Application Server"
I've then gone to Display/Define and select component ST-A/PI with the following results:
"No Support Package found for this selection"
I have then tried to Upload from Front End instead of Application Server, with the same results.
I've raised a call with SAP but as usual it's now been 4 days without so much as a change in status so I'm hoping someone on here may have an idea.
Many thanks.

Ok guys, thanks for the replies. I haven't given you enough information.
Let me try fill in some gaps.
The result after I selected Load from App Server is to show me the .PAT file and tell me in the message text that: "OCS file already exists in Inbox. Upload not required"
However, if I select "Display" when "New Support Packages" is selected in SPAM, I see nothing with a note at the bottom stating "No OCS Packages found for this selection"
Maintenance Optimizer seemed to want me to select components I did not want to patch. I had a total of 110 files added to my download basket to download the one file I needed!
That file was titled "Servicetools for other App./Netweaver 04s"
I've already installed the ST-A/PI addon using SAINT. This recommendation is to install Support Package SP02 for ST-A/PI.
The recommendation also appears if I run RTCCTOOL in SA38 as well.
I definitely have the correct permissions to run this and, for the record, I have both the .SAR file and the "uncarred version" sat in EPS/in.
Thanks again.

How to download Support Package without using Solution Manager

Hello Guru,
I am planning to upgrade our Netweaver System to SP12, which is released after Apirl 2007, now SAP AG requires Solution Manager to approve the SP download request, then I can use SAP Download Manager to download basket.
Is there any way to walk around? because we don't have a configured Solution Server.
Thank you

Hi,
You can try to complain to SAP but I am very doubtful this will change their mind.
This the way SAP found to set SOLMAN mandatory. I think this is ridiculous as the customers should always be the ones making the choices and not the suppliers...
There is absolutely no added value from SOLMAN to download the support packages...
Regards,
Olivier

A dummy question - download support package

Hi:
I am downloading a support package for a sandbox system, and I need to download a support package.
After I add it to my download basket, it says pending approval.
I read the help it seems need to approve it via solution manager optimizer.
I talked with my basis and he seems has no knowledge about it. I have no access to my solution manger system, so could anyone let me know what is the step to approve the download? Is it difficult? I will then let my basis approve it.
Thanks.
Eric

Hi ERIC,
Configure your satellite system in maintenance optimizer (in solman) .
Maintain RFC connection (sm59)
maintain your sap oss user name and password in RFC DESTINATIIN (SAP-OSS)
then run tc.ode solution_manager
choose ur system
create New Maintenance Transaction
enter your server details
after finish this steps you can fine the ID in the screen MAINTENANCE TRANSACTION.
click that ID
now click "confirm file is download busket".
Hope this will help you.
Bhuban

Support Packages Execution consuming too long time to get complete

Hi,
I installed the SAP Solution Manager 4.0 SR1, I have downloaded the support package stack till june 2007, and applied it. while importing I faced one error XPRA_EXECUTION, Resolved it (by refering sap note:979594) and again click on import. Now it is post 2 and the half day, the execution is still under process. Displaying status as "tp buffer prepared OK". Can anyone tell me how much time it will take to complete.

I have found these errors in tp log can any tell me the solution
WARNING: /usr/sap/trans/tmp/N110531.PRO : cant open
WARNING: : cant open
WARNING: /usr/sap/trans/tmp/N110531.PRO : cant open
WARNING: : cant open
STOP tp_getprots PRO Y 20110531061009
WARNING: /usr/sap/trans/tmp/N110531.PRO : cant open
WARNING: /usr/sap/trans/tmp/N110530.PRO : cant open
WARNING: : cant open
WARNING: : cant open
unable to open the open the files...???

Spam/saint update and support package

Hi,
our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
*in solution manager support package is
SAPKB70008
SAPKA70008
SAPKIPYJ78
SAPKITLQI2
SAPKW70008
SAPKNA7005
SAPKU50005
SAPK-40005INCPRXRPM
SAPKITL416
SAPK-15074INSTPL
SAPKITLOG3*
*in dev/produ system support package is
SAPKB70011
SAPKA70011
SAPKIPYJ7B
SAPKITLQI3
SAPKW70012
SAPKNA7008
SAPKE60015
SAPKH60008
SAPKGPID08
SAPKGPGD08
SAPKGPRD08
SAPK-60008INFINBASIS
SAPKGPPD08
SAPKGPFD08
SAPKGPHD15
SAPKGPDD08*
please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
Regards,
Asif

Hi Asif,
How to get particular support package from service market place .
EX:SAPKB70011
If you want to download the patch SAPKB70011:
Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
You can add the required patch to your download manager.
Thanks & Regards,
Nagendra.

What minimum Support Package level is needed in BW 3.5 / 640 to be able to

Hello Experts,
A quick question:
what minimum Support Package level is needed in BW 3.5 / 640 to be able to run the SAPGUI 7.10 (including BW add-ons)?
I am also searching at my end.
<removed_by_moderator>
Read the "Rules of Engagement"
Best Regards
Sachin Bhatt
Edited by: Juan Reyes on Jun 29, 2009 11:15 AM

Hi,
Refer the below link
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=30625
A. FEP stands for Front-End Patch. FEPs are the patches that SAP releases for the BW front-end components of the SAP GUI.
They can be downloaded from the SAP Service Marketplace (SMP login required), browsing to the following locations:
BW 3.5 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BW 3.5 ADDON FOR SAPGUI 7.10-> Win32.
BW 7.0 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BI 7.0 ADDON FOR SAPGUI 7.10-> Win32.
Let us know if u have any issues.
Regards,
Ravi

Regading for Support Package Stack

Hi All,
Can we apply ABAP patches from JSPM? I have downloaded ABAP support packages.
I am waiting for yours reply.
Thanks & Regards,
Charanjit.

Hi,
Please apply the ABAP Patches using SPAM only. JSPM is only for apply JAVA related patches.
Please follow this link for more information on JSPM.
http://help.sap.com/saphelp_nw70/helpdata/en/1f/c45b4211aac353e10000000a1550b0/content.htm
With Regards,
Saurabh
Edited by: Saurabh.Arora on Jun 3, 2009 8:52 AM

Question Support package

Hi,
Can anybody tell me which support package of netweaver 2004s ist identical (for example has the same version of jndi-provider) to support package 19 of netweaver '04?
Thanks for the information.
Regards
Stefan

Hi Stefan
just try here
https://websmp102.sap-ag.de/swdc
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000595001&_SCENARIO=01100035870000000202&
Go to service.sap.com
Software download-> SAP Support package->SAP Support package stack--->
Select 04 or 04s or whatever patches you need to down load.
Select the usage type which ever required.
If it is 04 follow this procedure:
Download te following file from service markeplace
CTRLMSSxx_0-20001822.SAR
J2EERTxx_0-10001982.SAR
J2EERTOSxx_0-20001822.SAR
SAPINSTxx_0-20001822.SAR
Here xx is the SP you need to patch.
Uncar these SAR files
Hope you know how to uncar these files.
After Uncarring two folders will be generated.
J2EE-RUNT-CD
SAPINST-CD
You can uncar these files anywhere. Only thing is you have to run the sapinst present within the SAPINST-CD folder.
For 04s download the SCA's and patch using JSPM.
Thanks !

EHP4 for ERP6/NW 7.01 Support packages location

Our SAP Component version is EHP4 FOR SAP ERP 6.0 / NW7.01.When I am trying to apply the support packages through SPAM(fron end ) i m getting an error no queue defined...?
I have downloaded the support packages from this download location.
- Support Packages and Patches - E" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" Entry by Component" SAP ECC Server VPack successor..
can any one help me by giving the correct download location..?
Edited by: letzfriend on May 9, 2011 12:53 PM
Edited by: letzfriend on May 9, 2011 1:05 PM

Hi ,
Seems that you have not defined the queue in SAP system. Please make sure that you have uncar all the components and put it under /usr/sap/trans/EPS/in directory.
in SPAN load all the components via support packs-> load components from application server in 000 client and then define the queue in a order so that you can import SPs in system.
Thanks..
Mohit

Support Package

Hi,
I have got a basic question.
1. I am performing clean installation and let's say the latest support package in the market is 10. Should i need to install support package from 1 - 10 (which would consume lot of time and effort) Or can I directly install Support package level 10.
Points gauranteed please help.
--Ragu

Hi,
Thanks already got answer from another forum. But can you tell me how much time it will take for each support package, say i have got 2GB RAM.
Points gauranteed.
--Ragu

Download/Install Support Package

Similar Messages

Maybe you are looking for