Download Itunes but get any error message

I just purchased an Ipod Nano. I downloaded the itunes program but when it opens I get a message that says iTunesSetup.exe is not a valid Win32 application. I have downloaded the program several times but it says the same everytime. I am also have to use dial-up at the moment. Thanks for any help.

Apple offer this help, unfortunately it doesn't often work:
http://support.apple.com/kb/TS1406
otherwise all I can suggest is to turn off popup blocking or try a different browser in case the file is being truncated. The latest installer comes out at 62,042 KB in Windows Explorer on my PC.
IF you really can't get it to work try downloading from FileHippo
http://filehippo.com/download_itunes/
If it doesn't work from there either, maybe there is an issue on your PC, although I don't know what it might be.

Similar Messages

I have a new computer, and downloaded iTunes but get an error message (Error 2) that Apple Application Support was not found. I have Windows 7

It tells me to uninstall, then reinstall iTunes, but I got the same result after I did that. What do I do now?

I tried to install the iTunes64 for Windows, but got an error message that iTunes64Setup.exe is not a valid Win32 application.
That usually indicates the installer has gotten damaged during the download.
Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
If you can't get a working installer via the standard download links, try the following download links instead:
iTunes 11.1.4 for Windows (32-bit) - iTunesSetup.exe
iTunes 11.1.4 for Windows (64-bit) - iTunes64Setup.exe

When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation." But it gives me no more information as to what I can do. Help please?

When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation." But it gives me no more information as to what I can do. Help please?

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

When trying to download itunes I get this error message An error occurred during Installation of Assembly " Microsoft VC80CRT type=win32".version "8.0.50727.4053", public key token =1fc8b3b9a1e18e3b"processor Architecture="AMD64", please advise

When trying to download itunes I get this error message. An errr occurred during installation of assemby " Microsoft VC80CRT type=wind32" vversion "8.9.50727.4054, public key token=1fc8b9a1e3b"processor Architecture="AMD64" Please advise

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I keep trying to download reader but get an error message stating i have no rights or authority to do so on my single user pc

i keep trying to download reader but get an error message stating i have no rights or authority to do so on my single user pc

You either need to be logged in or run the installer as an Administrator user.
If you already do that, can you post the exact message you are getting?
And yes, knowing your operating system would help.

When I try to download itunes I get the error message "ITunes.Setup_exe file could not be downloaded Please help

I had ITunes installed up n running last November. Few weeks ago I started getting error messages and said to reinstall ITunes to fix the problem. So I went to control panel and deleted all Apple related programs, quick time n Itunes and reinstalled them But I cannot down load Itunes I get another error message saying ITunes.Setup_exe. This file couldn't be downloaded. I have been trying for weeks now and I am desperated Please help me

See Troubleshooting issues with iTunes for Windows updates.
tt2

I just downloaded itunes and get an error message (-3212) when I try to connect to the store. I have an hp pavillion using Windows 8.1

i just downloaded iTunes for my Windows 8 laptop and get an error message when i try to connect to the iTunes store (-3212)

Hello Steve,
Thank you for the details of the issue you are experiencing with the iTunes Store. I recommend the following steps for error (-3212):
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Find the full article at the following link:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1483 When I try to download itunes I get an error message 7. How do I fix this?

I need help installing Itunes on my computer. It use to work but now I get an error 7 message, (Windows 5). How can I reinstall Itunes..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have been using iTunes for years on my PC, using Windows 7. I tried re-installing iTunes but get an error message that says, "iTunes can't start because MSVCR80.dll is missing from your computer."

After using iTunes for years I suddenly am prevented from opening it. I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."
Upon trying to reinstate I am thwarted with this: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)
Can anyone help? Thanks.

Click here and follow the instructions.
(98818)

I can't connect to the itunes store. I have the latest version of itunes on my windows 7 computer. I can connect to itunes from my ipad and ipod but no my windows computer. i dont get any error message, the bar at the top just says accessing itunes.

I can't connect to the itunes store. I have the latest version of itunes on my windows 7 computer. I can connect to itunes from my ipad and ipod but no my windows computer. i dont get any error message, the bar at the top just says accessing itunes

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??

Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
Is a copy of the CFNetwork file available for download if mine is corrupted?
Thanks

get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Can't on to iTunes Store. But don't get any error messages

Since upgrading to 10.6 I can't log on to the store. I don't get any error messages, it just doesn't log on.
Password etc is right and I can access the internet Ok just not iTunes.
I have tried downgrading to a previous version of iTunes but then can't use iTunes as I get a message saying the "library is not accesible because it was created
in a newer version of iTunes"
I have tried disabling Firewalls and AVG Antivirus without any success.
Anyone got any ideas?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

B-rock, thanks for posting the above. I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\. When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message. I've reset my ipod thinking that would help but still, no backup.
In iTunes, Edit, Preference, Device there are no backups.
What am I doing wrong, can you help?
Thank you!

When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!

Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

Download Itunes but get any error message

Similar Messages

Maybe you are looking for