Download link for RBS SharePoint Server 2010

I'm trying to download rbs_46.msi sql server 2008 for sharePoint server 2010 on the link below:
http://download.microsoft.com/download/E/4/8/E48816F7-4612-432E-B135-0F90C0211701/RBS_X64.msi
but it give me these error msg:
File not found
Firefox can't find the file at http://download.microsoft.com/download/E/4/8/E48816F7-4612-432E-B135-0F90C0211701/RBS_X64.msi.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
there is two download links for RBS in this article the first one for SQL Server 2008 R2, and the second one for SQL Server 2008 witch is not working.
http://technet.microsoft.com/en-us/library/ee748631%28v=office.14%29.aspx
i need active download link please

oh, thank you. I ask my security team and there is no blocking from them. I want it for SQL Server 2008 with sp1 and cumulative update package 2 not for SQL Server 2008 R2.
you can found that there is two download links for RBS in this article the first one for SQL Server 2008 R2, and the second one for SQL Server 2008 witch is not working.
http://technet.microsoft.com/en-us/library/ee748631%28v=office.14%29.aspx
thanks

Similar Messages

Download Link for Oracle WebLogic Server setup for 64Bit 2008R2 Server

I need One Information. Can we get Oracle WebLogic Server setup for 64Bit 2008R2 Server. If Yes Please provide me the Dowload Link.
Thanks
Vishwa

Got link ... downloading Setup .. trying for my Luck

Need download Link for LYNC SERVER 2010

I Couldn't find the download link for Lync Server 2010.
It redirects to Lync Server 2013 download page.
Could anyone please reply me with Lync Server 2010 download link?
Regards,
Arun

The Lync Server 2010 Trial VHD is located at:
VHD test drive: Lync Server 2010
(Eval) - Part 1 of 2
VHD test drive: Lync Server 2010
(Eval) - Part 2 of 2
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013.

I want to setup a Disaster Recovery Server for Sharepoint Server 2010

There are four production server running sharepoint server 2010 and one SQL server for
ContentDB management.

DR depends upon your backup stratgies, i.e
1) if you taking full backup of sharepoint using SharePoint tool
2) If you taking just SQL backup( Content DB and Services DB).
3) using the 3rd party tool for backup and recovery.
apart from above, you also have make a decision what point of time you want recovery.
from your questions, what i think for you.
Setup new farm with same SharePoint level.same customization, same services configuration, and same number of web apps.
then backup from Prod server( SQL content DBs) and then restore into new farm and mount them.
this is one time thing, Now you have to make decision, how data move from Prod to QA( i mean frequency i.e daily, monthly etc).
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Can´t apply December CU 2013 for SharePoint Server 2010

Hi !
I am trying to apply december CU 2013 in or SharePoint Server 2010 (SP2) Farm.
1. I downloaded the december CU 2013 (KB 2849971)
2. Installed it on every server in the farm. (No Problem)
After the installation i was trying to run the Configuration Wizard on my first application server, but then it says that i missing the Hotfix 2849971 (Server1) that i newly installed. I tried to reboot the server, but the same
happens again.
Tried to install the CU again but then it says that th CU has nothing to apply. (Well i got i already)
Anyone who has any advice what i should do, i am stuck on this?
//Matt

Run Get-SPProduct -Local on the problematic server, wait a few minutes, and then attempt to re-run the Config Wizard.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Upgrading Classic based 2010 web application to claim based 2010 web application in Sharepoint server 2010 RTM

hi all,
i have a web application with classic based authentication in SharePoint server 2010, need to configure FBA for the same app in SharePoint server 2010 RTM.
While trying to change the Authentication Provider, m getting the Form option deactivated.
please let me how to upgrade the Classic mode authentication web app to the Claim Based authentication web app.
Thanks and Regards,
Arun Kumar

Hi Arun Kumar,
Below the grayed out “Form” authentication type, is there a message with a link about how to enable Forms Based Authentication in claims mode?
You should perform the following PowerShell script to convert the existing web application to claim based authentication.
$w = Get-SPWebApplication "http://<server>/"
$w.UseClaimsAuthentication = 1
$w.Update()
$w.ProvisionGlobally()
For more details, please refer to:
http://technet.microsoft.com/en-us/library/ee806890.aspx
http://www.chakkaradeep.com/post/FBA-in-SharePoint-2010-requires-claims-mode.aspx
Thanks & Regards.
Lily Wu

Sharepoint Server 2010-2 abnormal issues, please help

Sharepoint Server 2010 Enterprise met 2 abnormal issue these 2 days,
1. When Site Setttings>Navigation>Add Link>Browse, when Select an asset dialog, show blow error message
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft Sharepoint compatable HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Correlation ID: (guid appears here)
2. When Site Setttings>Navigation>Add Link>Audience, when Select Audience, cannot find any user.
Server is normal and did not do any update, don't know why these 2 issue occured, please help.

For the first issue, I can find the correlation ID in the ULS logs, but I cannot find the root cause and solution.
07/19/2013 11:16:22.90 w3wp.exe (0x3A30)                       0x3370 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (POST:http://oqm:80/projects/_layouts/AssetPortalBrowser.aspx?List=56885fca%2D13a8%2D47f1%2D90fd%2D5fdce93c2f0f&MDWeb=15d0e0ff%2Db469%2D4236%2Da720%2D198a114cd996&AssetType=Link) 2ef7a5d9-a969-428e-96fe-907c1c787971
07/19/2013 11:16:22.93 w3wp.exe (0x3A30)                       0x3370 SharePoint Foundation
Logging Correlation Data      xmnv Medium Site=/ 2ef7a5d9-a969-428e-96fe-907c1c787971
07/19/2013 11:16:24.07 w3wp.exe (0x3A30)                       0x3370 SharePoint Foundation
Web Parts                     89a1 High    Error while executing web part: System.NullReferenceException: Object reference
not set to an instance of an object.     at System.Xml.Xsl.XslCompiledTransform.Load(MethodInfo executeMethod, Byte[] queryData, Type[] earlyBoundTypes)     at Microsoft.Xslt.STransform.GetCompiledTransform()
at Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean
bDeferExecuteTransform) 2ef7a5d9-a969-428e-96fe-907c1c787971
07/19/2013 11:16:24.07 w3wp.exe (0x3A30)                       0x3370 SharePoint Foundation
Monitoring                    b4ly High    Leaving Monitored Scope (DataBinding DataFormWebPart ()). Execution Time=1062.06585321011 2ef7a5d9-a969-428e-96fe-907c1c787971
07/19/2013 11:16:24.09 w3wp.exe (0x3A30)                       0x3370 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (POST:http://oqm:80/projects/_layouts/AssetPortalBrowser.aspx?List=56885fca%2D13a8%2D47f1%2D90fd%2D5fdce93c2f0f&MDWeb=15d0e0ff%2Db469%2D4236%2Da720%2D198a114cd996&AssetType=Link)).
Execution Time=1185.79912823934 2ef7a5d9-a969-428e-96fe-907c1c787971

I am Facing problem with "Send to connection" in SharePoint Server 2010.

Hi all,
I am working on SharePoint Server 2010
I have a site collection and sub sites in it.
I want to move the document form one site library to another site library.
Since it can be done by configuring, Send to connection in Central Admin.
I activated Content Organizer rules in both the sites.
I added new connection for one site and append the url
/_vti_bin/officialfile.asmx
I tested the url on clicking
Click here to test link it gives me message that
"URl is a Valid routing Destination".
and finally I added the connection
After configuring this I open the other site and uploaded a document in it and after uploading the document I selected send to
option and clicked on my connection what I created in central admin.
But it gives me error: The site could not be found or accessed
Please help me for this...
Thanks in advance..
Faheem Ahamed

Hi,
In my case, I'm routing an InfoPath form (After having approved) to an archived Forms Library within the same sub-site.
I created Send To connection, setup Content Organizer rules, setup Record Retention policy on the source Forms Library, but even after running both the Timer jobs (Information management policy and Expiration policy), the document didn't get moved to the
archived library.
I checked under Compliance details of the form that the Scheduled occurrence date shows 'Completed' i.e. the Information management policy timer job did its task, but the other Timer job didn't move this form.
Then I tried sending this form manually using Send To. In that case, although the form got moved to the archived library, but I see 'Unexpected error' on the screen.
The ULS shows following entries:
<nativehr>0x80070057</nativehr><nativestack></nativestack>Invalid data has been used to update the list item. The field you are trying to update may be read only.Possible mismatch between the reported error with code = 0x8107210c
and message: "Invalid data has been used to update the list item. The field you are trying to update may be read only." and the returned error with code 0x80070057.
OfficialFile: File
http://server/sites/site/SourceFormsLibrary/InfoPathForm.xml was not saved at router location TargetLibrary. Exception <nativehr>0x80070057</nativehr><nativestack></nativestack>Invalid data has been used to update the list item.
The field you are trying to update may be read only. thrown at: at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion,
Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties,
Boolean bCheckOut...
Critical --- The
http://server/sites/site/_vti_bin/OfficialFile.asmx site is not properly configured for this request.
Can somebody tell how manual Send To is working within the same site collection.
Any help will be appreciated!
Thanks!
Ashish

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

Problem with download link for a BLOB Column in a "Classic report"

I am having a problem where I cannot make a download link for a blob column function in a "classic" (non-interactive) report. I went through the tutorial on this topic and it was great help it working out the minor bugs, but I get a 404 error (apex_util.get_BLOB not found). For testing purposes I went ahead and created a an identical report on the same page that is an "Interactive report" and it works like a charm. Same query, same BLOB formatting Mask, pulling data from the same table. So, it really doesn't seem like an issue with the grants, since both reports should be executing as the same user.
I know it sounds like the obvious answer is to just go with the interactive report and my problem is solved, but the rest of this site uses classic reports, and I don't need the sort features of an interactive report, and the slightly different style of the the report really stands out even if I turn off all the bells and whistles. I don't want to change the css to make them look identical, I just want a regular report to work.

I eventually found another post: APEX_UTIL.GET_BLOB was not found on this server
In this post there is the suggestion of putting "dbms_lob.getlength("var")" after the date field in your select. So I changed my query to have it at the end, and now my format mask (DOWNLOAD:table_name:ATTACHED_FILE:FILE_ID::FILE_MIME_TYPE:FILE_NAME:::attachment:Download) works like a charm, in a classic report.

Funtional download link for Creative Suite Standard CS6 Mac Os

Please provide me with a function download linke for Creative Suite Design Standard 6. The provided download link from this site https://helpx.adobe.com/de/x-productkb/policy-pricing/cs6-product-downloads.html does not work. I always get a "permission denied" error when I try to download the install file for mac.

You don't have permission to access "http://trials2.adobe.com/AdobeProducts/DSGN/CS6/osx10/DesignStandard_CS6_LS16.dmg?" on this server.
Reference #18.a7d81002.1425211646.439bcb13
Unfortunately the same thing

Download link for only some rows

Hi,
I have 2 tables. One contains records for products, and the other contains images for only some of the products. The images have been uploaded through the application and therefore are in a 'upload_data' table.
The tables are linked by product_id.
I would like to display a report that shows all the column from the products table and a download link for only those products that have an image.
So far the query only returns those rows that have an image.
Thanks
Edited by: user12970007 on 20-Apr-2010 17:59

What does this query look like?

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
Saidireddy

Hi
your little question, could have a big big answer, or answers ;)
To complete your question, ai will try
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
Depends on you to read, learn and ask , punctually about one issue/problem/request
I recommend you to bing the net
http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

SharePoint Server 2010 can't connect to the Configuration Database

Hi Techys,
I have a SharePoint Server 2010 Farm, and I have Installed SharePoint SP1 package,
Then I,m trying to run the SharePoint configuration wizard, That time i have the below error.
"Can't connect to the Configuration Database"
I have checked all the services belongs to the sql server and SharePoint server.
here i found, SharePoint Timer service is automatically Stopped while browsing the Central admin url.
Please help me to resolve the above issue.
Many Thanks,
Madhu

What you mean error in Config wizard, could you please share the complete error log?
For Timer Services, check under which account it is running and check event log why its stoped?
for CA error there are couple of possible reason for this:
Make sure SQL related instances / services are running fine.
Make sure your farm admin account have permission on config DB.
Make sure Config Database Exist.
Make sure you can connect to SQL server from your APP /WFE.
If everything is running fine, then you may need to reconfigure the sharepiont products and technologies configuration wizard. The issues might be because of the update that might have installed some additional components for installation.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Did not find the PerformancePoint Services in sharepoint server 2010

Hi Friends,
i have just installed the sharepoint server 2010 in my computer. i want to use it to make scorecards. but i did not find the Performance services in Central administration (services on server)
anyone can help me with this?
Qearl

PerformancePoint services are available only if you have installed Enterprise edition of SharePoint. If you have installed Standard or Foundation, then PerformancePoint is not available.
Marek Chmel(MVP SQL Server, MCSE SharePoint 2013, MCT, CCNA,CCDA)
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you.

Download link for RBS SharePoint Server 2010

Similar Messages

Maybe you are looking for