Download Manager with Microsoft ISA Server

Hello forum, I need help with the connection of program SAP DOWNLOAD MANAGER with ISA Server 2004
I've installed JAVA 1_4_2_13 and Download Manager, I configured the setting with the proxy connection (server ISA, user and pass)
but an error appears:
The basket content could not be read. The following exception occurred:
Unable to read data from the Service Marketplace: Check your settings and try again
In my ISA server I declared the form my IP to Internet permit all traffic out.
Somebody help me ??? what do I have to configure in my ISA Server to permit the connection?
Thanks.
Costa Gustavo

Hi Ram, I solved the problem with download manager.
First my PC don't use as default gateway the ISA Server, I've another default gateway for my LAN.
Is it the problem because my PC never contact directly to SAP, I could solved this problem if my PC can contact directly the IP of SAP.
You will can set in your PC the gateway of ISA server and public DNS to contact SAP directly
For example:
I've default gateway 192.168.0.1 for my LAN
My ISA server to internet is 192.168.0.9
Public DNS : (My ISP) 200.0.1.1
In your ISA server you can set a policy from your PC to External for all user with all traffic permit.
You try set in your PC the following:
Default gateway: 192.168.0.9
DNS: 200.0.1.1
I hope this can resolve your problem
Regards.
Costa Gustavo
SAP BASIS.

Similar Messages

Customers not able to log in with Microsoft ISA server firewall.

I have a few external customers that are having issues logging in. In all cases it is with the customer having Microsoft ISA firewalls.
They can get to the site. They put in their username and password. The screen flashes back to the logon screen, no errors, just back to the screen.
On the logs I seen the logon page request and the 200 OK but, the username and password never come across.
I can not tell if the username and password are being blocked by the ISA server or when the logon screen is presented that the username and password fields are just not active.
Has anyone else see or hear about this one?

We are seeing a slightly different problem but certainly related. We are using a SAP cFolder server for PLM collaboration. Companies using a Microsoft ISA server are not seeing problems logging in but are seeing problems with the mass download feature. They are seeing the connection hang. Looking at the ISA log file on the server they are receiving an authentication problem and a broken connection. If you try a single file download everything works OK. Also vendors without ISA are working fine.
What is it about ISA that would be causing issues like these?

Use of CE/WCCP with Microsoft ISA server acting as an authentication proxy.

We have a design where all web users are authenticated against Active Directory by Microsofts ISA server proxy service prior to accessing web resources.
Is it possible to implement a CE behind the ISA server, and still have the proxy authenticate users credentials?
My concern is that WCCP will redirect traffic to the content engine first, if the content is not available, wil the content engine then forward to the proxy for authentication prior to the request going out to the web?
Cheers,

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

UCM certified with Microsoft Exchange Server ??

Hi,
Is UCM certified with Microsoft Exchange Server ? how can we integrate UCM with Microsoft Exchange Server as we have Desktop Integration Suite to integrate with MS Outlook..
Thanks,
NL

As for the link to the manual, for 10g it's here (I believe for 11g it will be similar if not the same): http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/managing_system_10en.pdf
It also mentions that SMTP protocol is used. Therefore, you will need to know the SMTP address of your Exchange Server.
As for who uses it, I believe it is the majority or at least a significant part of the clients' installed base. Note that it is one of the most widespread email servers.

Authenticating via Microsoft ISA Server using Integrated protocol

*** Cross-posted in Advanced Language Topics forum ***
Does anyone know how to configure a URLConnection object to authenticate via a Microsoft ISA Server using the Integrated protocol?
Authenticating using the Basic protocol is easy:
URLConnection conn = <whatever>;
String username = <whatever>;
String password = <whatever>;
String auth = username + ":" + password;
String encodedAuth = new BASE64Encoder().encode(auth.getBytes());
conn.setRequestProperty("Proxy-Authorization", "Basic " + encodedAuth);Does anyone know what to change to authenticate with the Integrated protocol?
Thanks,
Shaun

Just visiting...
Shaun

Oracle HRMS Integration with Microsoft Exchange Server 2007

I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.

hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N

How do I disable Firefox's Download functionality, I would like to use another download manager with Firefox...many thanks Bruce

Hi I am using version 3.6.15 with Windows 7, I would like to use another download program in place of Firefox's default option, how can I disable this in Firefox
Many thanks
Bruce Baxter

Use this extension to integrate an external download manager with Firefox. <br />
https://addons.mozilla.org/firefox/220/<br />
http://www.flashgot.net/whats

MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012

I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
where I can find this book.
Thanks

Hi Azhar lqbal Gondal,
According to your description, since the issue regards training and certification,
I suggest you post the question in the Learning forums at
http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
you can visit and post your question on the SQL Server Forum.
There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
Exam content can be found here:
http://www.microsoft.com/learning/en-us/exam-70-466.aspx
http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Integrate cProjects with Microsoft Project server

Dear all,
Does anyone know how to integrate cProjects 4.0 with Microsoft Project server 2003 in details? Pls kindly help.
Thanks and best regards
Trung

Hi Murali,
Do you have any documents showing how to configure cProjects step by step to integrate with Microsoft Project server? Pls help.
Hi Niranjan,
Pls check your email.
Thanks and best regards,
Trung

Oracle Database XE with Microsoft Windows Server 2008 (32-bit)

I would like to find out if Oracle Database XE works with Microsoft Windows Server 2008 (32-bit)?
If not, is there any other Oracle Open Source Database version can work with Microsoft Windows Server 2008 (32-bit)?
Any help would be greatly appreciated!

I am installing W2k8 R2 Domain Controller with Oracle Express 10g.
This is the tip to make it work.
Go to the installer OracleXE.exe -> Right click + Select Properties + Compatibility + Run this program in Compatibility Mode fot + Windows 2003 Sp1
Then Select Run this Program as administrator.
After this run the OracleXe.exe and it will install properly.
Remember to double check that everything works fine.

Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010

Hi,
We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
We do not have any VCS in the setup.
If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
Regards,
RN

Hi,
so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
here is m config:
vrf definition Mgmt-intf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
voice vrf Mgmt-intf
voice service voip
no ip address trusted authenticate
address-hiding
media disable-detailed-stats
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
bind control source-interface GigabitEthernet0
bind media source-interface GigabitEthernet0
listen-port non-secure 5066
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class codec 2
codec preference 1 ilbc
codec preference 2 g722-64
codec preference 3 g711alaw
codec preference 4 g711ulaw
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 172.16.1.164 255.255.255.0
negotiation auto
dial-peer voice 15 voip
tone ringback alert-no-PI
numbering-type unknown
preference 1
destination-pattern 4.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.2.207:5068
session transport tcp
voice-class codec 2
dtmf-relay rtp-nte
dial-peer voice 17 voip
numbering-type unknown
preference 1
destination-pattern 7.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.1.32:5060
session transport udp
voice-class codec 2
dtmf-relay rtp-nte
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:172.16.2.207:5068 tcp
172.16.1.32 - Asterisk with a extensions on it.
172.16.2.207 - Lync 2013 mediation server with other extension on it
i can call from Asterisk extension via router and to Lync extension.
i cannot call from Lync to Asterisk.
TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
strange. lync person seems to configured everything correctly
any thoughts?

Groupware integration with microsoft exchange server

I have a query regarding Groupware integration with microsoft exchange server.whether we require IIS server and microsoft exchange server on the same machine for groupware integration.or they can be on different machines.
thanks,
Pramod

hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N

Download issue on microsoft lync server 2013

Error on clicking registration link while downloading lync server 2013 evaluation version. please help me from where i can download the lync server 2013 now.
http://www.microsoft.com/en-us/evalcenter/evaluate-lync-server-2013

Hi
That link works fine, did you register at all as the sites requests? Once you have registered it will give you the option to download with a download manager.
Do you get this far?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Binding in Prepared Statement is not working with Microsoft SQL Server JDBC

I ran the following program with sqljdbc4.jar in the class path. There is data in the EMPLOYEE table for the employee name DEMO but the following program is not retrieving data for DEMO. When the same program was run with Merlia.jar in the class path, it was retrieving data for DEMO.
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
Connection con = DriverManager.getConnection("jdbc:sqlserver://SERVER23:5000;databaseName=TESTDB", "SYSADM", "SYSADM");
String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ?" ;
PreparedStatement sts = con.prepareStatement(sqlSele);
sts.setString(1, "DEMO" );
ResultSet rs = sts.executeQuery();
while(rs.next())
System.out.println("driverConn.main()" + rs.toString());
catch(Exception e)
System.out.println(e);
e.printStackTrace();
Can someone help me out from this issue.

This is the program that I used for testing the behaviour of prepared statement with sqljdbc4.jar. Also included the code for Merlia.jar.
import java.sql.*;
public class driverConn {
     public static void main(String [] a)
          try{
          Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
          //Class.forName("com.inet.tds.TdsDriver");
          Connection con = DriverManager.getConnection("jdbc:sqlserver://SERVER23:5000;databaseName=TESTDB", "SYSADM", "SYSADM");
          //Connection con = DriverManager.getConnection("jdbc:inetdae7a:SERVER23:5000?database=TESTDB", "SYSADM", "SYSADM");
          String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ?" ;
          //String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ‘%DEMO%’”;
          PreparedStatement sts = con.prepareStatement(sqlSele);
          sts.setString(1, "DEMO" );
          //sts.setString(1, "%DEMO%" );
          java.sql.ResultSet rs = sts.executeQuery();
          while(rs.next())
               System.out.println("EMPNAME is " + rs.getString(“EMPNAME”) + “”);                    }
          catch(Exception e)
               System.out.println(e);
               e.printStackTrace();
Following are the specifications:
Version of the Driver:
Microsoft JDBC Driver 4.0 for SQL Server CTP3
Downloaded the driver using the link http://www.microsoft.com/download/en/details.aspx?id=11774
Java Version:
Java 1.7.0_02
Database Version:
Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64)

Issue with Microsoft SQL Server, according to SAP (LMB)

We are upgrading our SAP Solution Manager and ran into a problem. SAP has passed it on to Microsoft because it appears to be an issue with our MS SQL data base. So we get a question back from Microsoft that says - -
First, you are running SAPJVM1.4 and for a 1.4 environment the 1.2
version of the Microsoft SQL Server driver must be used.
So how can I find the version number for our Microsoft SQL Server driver ?? Thanks, Jim Wells

That is a difficult topic. Some articles:
http://blogs.msdn.com/b/sqlcat/archive/2010/10/26/how-to-tell-which-version-of-sql-server-data-access-driver-is-used-by-an-application-client.aspx
http://technet.microsoft.com/en-us/library/ms181099.aspx
http://www.mssqltips.com/sqlservertip/2198/determine-which-version-of-sql-server-data-access-driver-is-used-by-an-application/
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Download Manager with Microsoft ISA Server

Similar Messages

Maybe you are looking for