Download Mavericks on one Mac and install on another

Just a couple of questions here.  From what I read you can do this.  My internet is much faster than my sons.  So I downloaded Mavericks on my Mac and then went to his house and installed it on his Mac.  Clean Install because he has been having some issues with an older iMac.  Followed directions on how to do this and installed on a USB flash drive.  No problems it all worked.
My question now is how does his Mac recognize Mavericks?  It does not show up in his purchases in the App Store.  He may need to re-download or who knows what sometime in the future.  An how about Updates?  All his other purchases such as iPhoto show up fine.

My question now is how does his Mac recognize Mavericks?  It does not show up in his purchases in the App Store.  He may need to re-download or who knows what sometime in the future.  An how about Updates?  All his other purchases such as iPhoto show up fine.
No need to re-download.  It's not in his Purchases as it was installed via USB.
But, no need to have it show there, he'll get future Update's through ->SoftwareUpdates (you can set notification settings in ->System Preferences->App Store)
And for others reading this post: Creating a bootable OS X installer in OS X Mavericks

Similar Messages

  • HT1338 my old mac cant connect to internet and my migration assistant needs an upgrade is there any way to download to my new mac and install the upgrade on my old one so i can complete the migration process?

    I just purchase a new IMac, I am trying to use migration assistant. the problem I am having is my old mac cannot connect to the internet and it needs a software update, can I download the update on my new mac and install it somehow on my old mac?

    If it's a free update, search Apple's support site for it and move the dmg as you would any file. If it's a paid upgrade, no; the Mac App Store upgrades, while downloadable, can't be downloaded from a Mac which can't use them.
    (78632)

  • Downloaded mavericks for one mac can i use the same download to install on another mac

    I have downloaded for 12 hours initial installation on one mac for mavericks, and all installed successfully. Rather than download again for another mac, can I use the same download and copy on to the other mac..and if yes, where will I find it?

    All you need to do is go to System Preferences > App Store and uncheck the automatic install of updates box, then download the Mavericks installer, and copy to a flash drive.  You will need a flash drive of 8 G B or more since the installer is around 5.3 GB.  The installer will be in Finder > Applications.  You can then copy that flash drive installer to the Applications folders in all the Macs you have that are capable of running Mavericks, http://support.apple.com/kb/HT5842.
    When the installer runs, the last step in the installtion is for the installer to erase itself.  So makng a copy before the installer runs is essential if you want to avoid redownloading.
    Installing from the same installer does not cause problems for Macs on the same network.

  • Uninstall photoshop from one computer and install on another computer

    How do you take an older version of Photoshop elements off one unused computer and add to another computer?

    You can download the installer from http://get.adobe.com/reader/enterprise/

  • Can I clone one Mac and restore to another?

    My wife has a 2005 17" CD MBP running Tiger which has seen better days and will probably soon give up the ghost. As a short term solution I was thinking of making a clone of the hard drive and restoring it onto a spare 2007 15" C2D MBP that we have.
    Will this work or will the different chipsets cause problems?
    I intend to use superduper as I already have a licence for this but was wondering if the clone that is made is machine specific, or will it not work because of the different chipsets.
    If this doesn't work would another option be to load Tiger onto the spare MBP and then use migration assistant to copy?
    Thanks in advance.

    Looking at http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html it seems that the MBPs in the year you provide could boot to 10.4.9  As long as you have it at least at that then you probably stand a reasonable chance.  While installations are nominally machine specific, I am not sure how much they are really. I have taken drives from one machine and put them in a similar machine (e.g., Quicksilver 2000 to QS 2002) and had them run for years with no issues appear. The only thing you can do is try, but I'd say it had a good chance of working.

  • Can i download mountain to one computer and install it on another?

    My son's Macbook pro won't boot up. Can I download Mountain Lion to a usb stick on my computer and use that to boot up my son's?

    Download ML again and make a bootable USB stick (8GB).
    Read here how to do it.
    Be sure that your son's MBP can run ML.
    http://www.cultofmac.com/180925/how-to-make-a-bootable-disk-or-usb-drive-of-os-x -mountain-lion/

  • Is there a way to sync music from one mac and podcasts from another mac?

    So I have all my music (CD Ripped and iTunes Store purchased) on an iMac at home. I sync a shuffle, nano, video and touch with it. Works great with playlists..
    Now, I have a MBP that I use for work and have been downloading podcasts to iTunes. Can I use one of my iPods (thinking of the Nano), to sync ONLY the music from the home iMac, and ONLY the podcasts from the work MBP?
    Thanks!

    Okay, I said what the ****, and connected the Nano to my MBP.. A breeze, I told it not to sync anything.. Went to the Podcast tab, and told it to sync and overwrite everything.. Seems to work perfectly.. Now lets see what happens when I connect it back to my iMac.. I think I just have to disable the syncing of the podcasts...

  • Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

    Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

    Just download, install, and activate using your serial number.  You are allowed to have the software installed and activated on two machines.  If you do not wish to retain the original installation as a backup you can deactivate it by opening one of the programs and choosing Help -> Deactivate.
    Here is a general link for where you can find download links...
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    If you would like a more direct link you will need to name the software and the version.
    If you need your serial number you should be able to find it in your Adobe account online if you registered the software when you first installed it.

  • Can I download lion to one computer and then install it on several computers I own?

    Can I download lion to one computer and then install it on several computers I own?

    You can install it on as many computers that you personally own. But if you have several then you may want to avoid having to download it multiple times:
    Make Your Own Lion Installer
    1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the InstallESD.dmg disc image file into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable Lion installer that  you can use without having to re-download Lion.

  • I just bought a new computer.  My old computer was a 32bit system but my new one is a 64bit.  I own ps cs6.  My question is"will I be able to deactivate ps on my old system, and download the 64 bit version and install and activate it or do I have to buy t

    I just bought a new computer.  My old computer was a 32bit system but my new one is a 64bit.  I own ps cs6.  My question is"will I be able to deactivate ps on my old system, and download the 64 bit version and install and activate it or do I have to buy the 64bit version in order to move forward.

    Nope, you can install it on your new computer with no issues. The disc contains both the 32 and 64 bit versions.
    Benjamin

  • I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

    I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

    What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
    Regards
    TD

  • I have downloaded elements to my mac and it has installed. how do I run the program?

    I have downloaded elements to my mac and it has installed. How do I run the program.

    Hi David,
    You can simply click on the application to launch it from the 'Applications' folder.

  • HT201364 I can't seem to install Mavericks to my mac and my MacBook meet all the Mac requirements

    I can't seem to install Mavericks to my mac and my MacBook meet all the Mac requirements...

    If you are trying to see if you can track your mac but nothing comes up, be sure the mac is connected to wifi, not just using ethernet cable to a modem.

  • I've paid $ 3,99 for Xcode for Snow Leopard. Now there is a new Xcode for Lion, so I downloaded the new one but the installed continued to be the old one. Now App Store says "Installed" and don't allow me to re-download Xcode. How can I proceed?

    I've paid $ 3,99 for Xcode for Snow Leopard 12 days ago. After installing Lion I saw there is a new FREE Xcode for it, so I downloaded the new one but after installing automatically Xcode for Lion the Developer folder contained the old one. I deleted the old Xcode but the App Store says "Installed" and don't allow me re-download Xcode.
    How can I proceed? I'm guessing whether this problem will occur each time I buy an application from App Store.

    Yes, that's righ, Xcode installer was in the Apps folder. I assumed it had been automatically installed and the installer deleted after installation (the same way as Lion is installed).
    I tried also the procedure for redownloding applications, and MAS showed both Xcodes (Lion and Snow Leopard) and OS X Lion. We see that buttons for Lion and Xcode for Snow Leopard say 'Install' but Xcode for Lion says 'installed' because there is an Install Scode in the Apps folder.
    Thank you.

  • Can I download an update on with one computer and install it using another?

    I want to update my Touch to 3.0 but my Mac at home that the Touch syncs with has a dial up connection so there is no way I can download the update- it's too big. Is it possible to download the update at work on a Windows machine and then somehow transfer it to my Mac and install the update?

    I have the same problem. I wish to download the update for a friend who only has dialup and has tried and failed to download the update himself.
    I'm hoping that the answer has changed (or will, Apple)??
    Alternatively, can he take his iPod Touch to an Apple Centre and have it updated there?

Maybe you are looking for

  • SAP Soamanager WSDL generates n0:string instead of xsd:string in 7.3

    I´m using the Soamanager to create a Service for a Enterprise Service Provider. The web service is generated based on a custom function module. My intention is to consume a soap webservice via .net application. Actually this works fine with the legac

  • For Negative Stock

    Hi We have not maintained the -ve stock indicator for the Plant or in the material master But still in MB5B stock is showing in -ve what can be the possible reasons for the same, Regards Niti narayan

  • Why use template layer

    When it comes to tracing an image manually, what's the use of using a 'template layer'. I'm used to just using a normal layer, placing the image, locking the layer and setting it to a 50% dim. Placing an image on a template layer basically does the e

  • Sell apps in Apple and Android uses the same application ID?

    Hi, I want to sell folios in Apple and the same folio is free - still - to Android tablets. Then I need produce these app with different application ID, right? So these folios will show alike buy in Android tablets, because I publish as retail and pu

  • IMatch won't upload 60  songs using MAC OS 10.5.8

    All these in eligible for iMatch songs are protected AAC and purchased with old (but still active) Apple Id.  However, iMatch did upload several song with same attributes