Download max speed

Can someone tell me what is the maximum download speed from the app store?  In other words, would a 30 meg/sec fiber home connection download speed significantly take over the standard 10 meg/sec fiber home connection?  Thanks...

idk but sometimes downloading either from my iPod or iTunes, it can get slow but last couple weeks, ive been downloading from iTunes the same rate as how fast my net is. hope that answers ur question.
my download speed is bewteen 12-16mbps and its been downloading to my speed, somtimes abit more like 36mbps n 42mbps ive seen.
Its not like Apple is really gonna tell u that. bc to me, that sounds abit personal to them not to tell anyone.
downloaded puss and boots in 5-10mins via digital copy. 1.27gigs

Similar Messages

  • Max speed 1.0Mbps?

    Why is the max speed that I get with my WRT150N 1.0Mbps?  It doesn't matter where I'm at in the house, it doesn't matter if its an HP laptop, Dell laptop etc...the max speed i get is 1.0Mbps?

    What is the speed you are getting when you connect the computer straight to the Modem...?
    What is the speed you are getting on the wired computer(computer connected to the router via ethernet cable)...?
    Try upgrading your Router's Firmware and then reconfigure it...
    Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • 2009 17" Macbook Pro fans running at max speed aafter hard drive upgrade.

    I recently picked up a 17" 2009 unibody MacBook Pro with Intel Core 2 Duo 2.8ghz, 4gb RAM, SuperDrive and a Samsung 1TB hard drive. The system did not come with the original hard drive and I don't have any other hard drives to test and verify that the new larger hard drive is the cause. I have tried a clean install of Snow Leopard, Lion and even Mountain Lion but no matter what my fans always running at max speed (5k+ RPM). I have looked at iStat and the temps of any of the components in the machine never show more than 42*C so the fans should never be running at full blast. Oddly enough smcFanControl shows 0* temp but fan speds for both left and right are always 5.5k+ and very noisy. Using HDD Fan Control I am able to get at least the right fan to run at a controlable speed but its silence is drowned out by the left fan that still runs on full blast. I have already done multiple SMC resets and PRAM resets with no change in the condition. These noisey fans are driving me insane! I have run every available update as well. Is there a chance that the hard drive or something elses temp not being supported or detectable by OSX is causing the fans to default to the fail safe constant high speed?!

    rriggin wrote:
    I will have to try that when I get can find the original discs because I have been unable to boot into the diagnostic utility with my Snow Leopard, Lion, or Mountain Lion discs. More than likely I am thinking a sensor failure because even booting into Ubuntu Live USB thumbdrive the fans still run at max.
    Well your just a regular pirate. There is no Mountain Lion disks, it's not even out of Beta and avaialble to the public yet
    We thought you were just mistaken but now your tech handy enough to boot a Mac off a Linux live USB, so that means you've been bad and downloaded MT Lion off a P2P network or something.
    If your beta testing 10.8 your bound to secrecy and not allowed to be discussing it and posting this sort of question on this forum, but the other one.
    If you know anything, OS X must "talk" to the hardware or else the default setting is to race the fans. Linux doesn't do this by default as it's designed for generic PC's which a Mac may appear to be one it's not really. Apple only supports OS X and Windows 7 on Mac's, not Linux.
    Obviously something on your machine is SEVERLY messed up in hardware, likely a dead sensor, you bought a used lemon that someone didn't want to pay to get fixed.
    Want to try Linux?, read this

  • Firefox used to download with Speed download along with other browsers, but since updating to version 6.0.2 it no longer does so; OS Z 10.6.8 and Speed Download v 5.2.28; what do I need to adjust and how, to get it working 'in the team' again, please?

    I have had problems with Safari and OS 10.6.8 (I think caused by Apple getting ready for Lion!) but after a lot of uninstalling etc I now have Safari, Camino and Chrome (all most recent versions) automatically sending downloads to Speed Download.
    Speed Download Plugin v 2.1.5 is installed; I do not know what or where to adjust or reset to get Firefox letting its downloads be picked up automatically once again like the other three browsers.

    Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
    And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
    The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
    Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
    (You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
    I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
    Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

  • Basic Questions on ActionTec MI424-WR Router - problems with poor download/upload speed

    First, I will get to the point and ask my questions, then will explain what's happening - I'm interested in hearing whether the right actions are being taken to solve my problem.
    1) After perusing the forums, I see frequent reference to the "Rev" version of the ActionTec MI424-WR Router.  How do you find the Rev version?  I have logged into the Router and in the "System Monitoring" icon, the Router Status lists my Hardware version as 'A'.  Does this mean I have Rev 'A'?
    2) What is Verizon handing out these days for Routers?  Mine is being replaced, and I am wondering what to expect.  I have Verizon FIOS Phone, TV, and Internet service, and have the 25/25 Internet service.  Will they give me another MI424-WR?  If so, what Rev level are they likely to give me?
    Here's why my router is being replaced - opinions/comments/advice welcomed.
    For the past year or two, I've consistently measured (via speedtest.speakeasy.net) about 30Mbs download, and around 22-25 Upload.  Lately, I noticed that my downloads were quite slow, so I tested my speed at the above website, which I had not done in many months.  I measured only about 2-3 Download and 1-2 up.  Note all of what I am discussing hear takes place with hard-wired ethernet, NOT wireless.
    I tried testing from multiple computers, running XP, Vista, and Windows 7.  All getting consistently similar poor speeds.  I verified my account still is supposed to have 25/25/ service, which I verified online. 
    Tried rebooting the router, no change.  Then tried hard reset (pushing in the recessed button, holding it for about 20-30 seconds.  After it reconnected to the Internet, I tested speed again.  No change.
    Interestingly, I tested wireless speed on the laptop I have.  Speed is MUCH better, around 15 down, and 10-12 up.
    I tried the speed optimization tool on two of my PCs, it made no improvement.  Finally, got into an online chat with a Verizon Tech.  He did some tests on the line, we repeated some of the things I already tried, and then he asked how old my Router was...I am pretty sure it is the original one I received when I first signed up for FIOS, around 5-6 years ago, which is one of the reasons I asked how to tell which rev level I had.   So the tech concluded the problem was probably my Router.
    I TEND to agree, especially because I recently had an "anomaly" on my network.  My son complained one day that Internet was down.  When I got home, I found out my NetGear Gigbit switch was dead, and two of my hard-wired ethernet network printers could no longer talk to the network.  I replaced the switch, so now I am thinking perhaps the Router was damaged somehow.  I have no idea what the cause of this anomaly was - everything that connects to my network was plugged into Triplite ISOBAR surge protectors, but that only protects AC power. 
    I would think a hardware failure would completely kill the ethernet portion of the router, not simply reduce speed, but I could be wrong.  Anyone been through something similar to this before?  I expect to receive the new Router next Thursday, so hopefully I should know by then, but still - what should the next steps be if the new router does not fix the problem?
    Thanks for any comments, insight or shared experiences you might be willing to share...
    Solved!
    Go to Solution.

    This is embarrassing.
    Smith6612, you are absolutely correct, and you nailed it!
    When all this mess started, I checked my Verizon account to make sure I was signed up for 25/25 Internet.  I was.
    I don't know what has happened, but after reading Smith6612's response, I went back to recheck my account.  I was set up for 15/5!  So, the speedtest measurements I have been getting the last couple of days are exactly what I should be getting.  Two possibilities:
    1) My Triple-Play bundle must have expired in the past two weeks by coincidence.
    2) The Verizon tech may have changed my account profile when I worked with them online last week, although this was never discussed.
    At any rate, Smith6612 wins the prize.  It certainly explains the download/upload speeds I am getting.  I have logged into Verizon and signed up for a new bundle.  According to their website, my new profile should take effect Tuesday 1/10, so after that point, I should be measuring 25/25 again.
    Thanks to all who responded to this thread.  I will update this thread to confirm after Tuesday.  I get nervous whenever I have to change anything with Verizon - although everything has worked fine for the past few years, we have so many services with them - Cell Phone, TV, Internet, and Home Phone, that I worry something will go wrong with the billing, but we'll see.

  • Why is the download/upload speed so slow on my MBA (about 5 times slower than my PC)?

    Why is the download/upload speed so slow on my MBA (about 5 times slower than my PC)?

    Are you on band 13 or band 4?  13 is the original LTE band and remains relatively congested. Band 4 is the XLTE band and is less congested and has higher overall potential bandwidth (15 MHz vs 10 MHz). Even so, 7 Mbps is more than enough for doing stuff on your phone and is not considered slow. 
    To check band,
    dial *3001#12345#*
    select serving cell info
    frequency band will say 13 or 4
    FInd an area with band 4 and retest. 

  • How can I get Firefox to pass its downloads to Speed Download as all the other browsers do (it used to be able to do this)?

    Until a few months ago All our browsers could automatically pass their downloads to "Speed Download" for downloading, very handy to have them all working in one place.
    Now after recent updated in the last six months or so Firefox alone no longer does this but insists on using its own download setting.
    how can I get it to respond to Speed Download as before, along with Google Chrome, Camino and Safari?

    Have you tried the update to Fast Dial, version 4.2.1 or later? It should override the built-in new tab page: https://addons.mozilla.org/en-US/firefox/addon/fast-dial-5721/ ''(Note: I haven't tested it myself)''
    If you are using a similar add-on that isn't the same "Fast Dial", which one is it?

  • I need to download MAX version 4

    I was talking to an NI engineer this afternoon, concerning the re-installing of LabVIEW 7.1.1, after having some problems removing version
    6.1.
    He advised me to obtain the latest version of Measurement and Automation Explorer, version 4. This, he said, could be downloaded from
    this site but I have searched for over an hour and cannot locate it. Please can you tell me where to find the download.
    Thankyou.

    Hi:
    I don't know if you can download MAX 4 by itself. But it's included in
    NIDAQmx 8.0, that's the way I got it. The link is the following:
    http://digital.ni.com/softlib.nsf/websearch/4C9E45F6EE5C29F98625708900712CBC?opendocument&node=132070_US
    That is for Windows XP. If you need to chose other platform, look at this listing:
    http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C1293?opendocument&node=132070_US
    Hope this helps.
    Robst.
    Robst - CLD
    Using LabVIEW since version 7.0

  • Re: Satellite L855 - max speed with newest SSD

    I am looking to buy this notebook
    +Message was edited: broken link has been removed+
    (Croatian language, but will help)
    I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
    thanks,
    Mario

    > I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
    I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
    I dont think that Satellite L855 supports an SATA III HDD controller.
    I think its SATA I, maybe SATA II
    My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

  • Hub 1 max speed?

    Hi,
    A very quick question if I may?
    What is the max speed that the version 1 of the BT Hub is capable of delivering?
    Thanks,
    Arnak
    Solved!
    Go to Solution.

    Here are my home hub 1 stats. Upload speed is usually about 1.2 mb, but dropped due to some noise recently.
    It will sort itself out eventually.
    DSL Connection
    Link Information
    Uptime:
    13 days, 10:20:51
    Modulation:
    G.992.5 annex A
    Bandwidth (Up/Down) [kbps/kbps]:
    846 / 12,437
    Data Transferred (Sent/Received) [GB/GB]:
    1.50 / 13.05
    Output Power (Up/Down) [dBm]:
    12.5 / 0.0
    Line Attenuation (Up/Down) [dB]:
    18.0 / 33.5
    SN Margin (Up/Down) [dB]:
    11.5 / 4.5
    Vendor ID (Local/Remote):
    TMMB / IFTN
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    5 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    Error Seconds (Local/Remote):
    1,201 / 0
    FEC Errors (Up/Down):
    0 / 662,385,328
    CRC Errors (Up/Down):
    0 / 31,836
    HEC Errors (Up/Down):
    0 / 29,524
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Max speed with Auto Flip?

    Hi!
    I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

    > I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
    I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
    I dont think that Satellite L855 supports an SATA III HDD controller.
    I think its SATA I, maybe SATA II
    My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

  • Max speed support on serial 2503

    Hi All,
    I have a router cisco 2503, I need to know what is Max. speed supported on serial interface? Presently we have 128KB leased line, and want to know weather I can upgrade the leased line to 256K with the same router ?
    THanks,
    A.S

    Hello,
    if you are referring to the two serial interfaces on your 2503, these are high-speed serial interfaces, which support speeds up to 2048kbps, or roughly 2MB.
    Check this link for more details:
    Cisco 2503 Router
    http://www.manucomp.com/cisco_catalogue/cisco_2503_router.html
    HTH,
    GP

  • Often I will leave my office and return to find the fan running at max speed and the computer is unresponsive

    I also have a MacPro3,1 (2009) I believe and just started experiencing similar issues as described here.
    I have scheduled sleep and start cycles and often I will leave my office and return to find the fan running at max speed and the computer is unresponsive or I find the computer booted in to disk utility mode.
    I also often loose ethernet connectivity and have to try renewing DHCP lease several times before it will finally work.
    Has anyone found solutions for this. I have looked at the console errors right before shutdown and don't really see anything fishy. Here are the last couple of lines before it looks like it shutdown.
    12/4/14 10:08:37.447 PM xpcproxy[5066]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    12/4/14 10:08:58.145 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.193 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.235 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.269 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.301 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.662 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:09:57.998 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:09:58.142 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:10:30.000 PM kernel[0]: PM notification timeout (pid 1514, Messages)
    12/4/14 10:10:31.129 PM mDNSResponder[39]: DHCPWakeTime: SCDynamicStoreCopyDHCPInfo index 0 failed CFDateRef start 0000000000000000 CFDataRef lease 0000000000000000 CFDataGetLength(lease) 0
    Any help would be greatly appreciated.
    <Re-Titled By Host>

    Mac Pro early 2009 is Mac Pro4,1, anyway, I think you need to boot into recovery mode, launch Disk Utility, then select startup volume and run repair disk.
    Xcode is the latest one, by the way?

  • Why has the download/buffering speed slowed down for videos?

    Why has the download/buffering speed slowed down for videos?
    What can be done about it?
    TIA,
    R. Ober

    The problem is with your router, your internet service provider or you have a marginal connection with your router.
    Locate your iPad close to your wifi router and see if the problem persists.
     Cheers, Tom

  • Airport Extreme + Airport Express and Max Speed.  Does my solution work?

    So, I am setting up a new network, with these parameters
    1) Extreme - main station, broadcasting dualband 2.4Ghz 802.11b/g/n and 5 Ghz 802.11n
    2) Express - to extend network
    3) Max Speed!
    So from what I've read, I could "simply" do this
    On the Extreme set to broadcast SSID "XYZ" on both 2.4/5
    On the Express set it to Extend "XYZ" on either 2.4 OR 5, not both.
    And then presto, network.  However, I'm thinking this is way to simple
    So my question is
    1) Does the Exteme only broadcasts one network on both bands?  I have seen that some posters have suggested to broadcast "XYZ" on 2.4 and then call another "XYZ 5 Ghz".  If I want to maximize throughput for all devices, what should I do?  Range is not an issue, both signals are perfect.
    Cheers

    First, there is no assurance that 5 GHz will provide you with higher throughput if the signal has deteriorated due to distance or obstructions. It is not unusual to see the 2.4 GHz band providing better throughput if the signal must pass through a few walls to reach the Express.
    The point is this....the Express will choose the best signal quality based a complex formula of speed and noise. If it "sees" a better signal at 2.4 GHz, that is where it will connect. If the 5 GHz signal is of high quality, the Express will connect at 5 GHz.
    Your computer will do exactly the same thing. If you are in the same room as the main router, it will connect to 5 GHz. Walk the laptop down the hall past a few rooms and around the corner and it will most likely connect to 2.4 GHz.
    If you have a Mac laptop handy, move it very close to the area where you plan to install the AirPort Express. Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen. Look at the Channel information to find out whether the laptop is connected at 2.4 GHz or 5 GHz.
    That will be a good indication of the band that the Express will connect to. What are your results when you try this?

Maybe you are looking for