Download MiniSap

Hello Staff
Well I have a problem in the Make Download of MiniSap
Download the Starts but no Continuity, or be it for a few seconds as if it was already-completed download.
Can anyone help me, my computer has a problem in need HD install again.

Older version of MiniSAP:
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/
MiniSAP:
https://store.sap.com/sap/cp/ui/resources/store/html/SolutionDetails.html?pid=0000000218
https://store.sap.com/sap/cp/ui/resources/store/html/SolutionDetails.html?pid=0000000222

Similar Messages

Where can i download minisap for free ?

Hi,
where can i download minisap for free ?
differences between minisap and sap?
Regards

Hi
Padma
refer these below links it may help u..
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
ftp://ftp.sap.com/pub/sapgui/win/640/
http://www.geocities.com/incho_master/MiniWAS.htm
please reward if they are usefull......

[b]MiniSap and the ABAP OBJECTS book [/b]

Hello,
I have purchased the book "ABAP Objects" by Keller and Kruger. I attempted to install Minisap and ran into a lot of problems. I suspect that I need the most recent version of this product that runs on Windows XP. Can anyone direct me to place where I may download Minisap without having to pay for it again! I really have to say that it shouldn't be this difficult to install a product that is used for training and education. So far I've spent more time trying to install than learning ABAP.

Most of the issues with trying to install this are either answered by the html documents on the kernel disc or by the FAQ doc at www.IT-minds.com search on ABAP and look for the resources.
One issue these documents will not solve is, if you have / had a version of SQLserver installed. As the disc only uses the MSinstaller_01 and can only use the default instance of MS SQLserver2000 desktop engine (MSDE2000).

Download mini sap

Hi Techeis,
please give me the link from where i can download minisap software.
i know it comes with abap objects ( i missed that cd) so please let me know where can i download this mini sap.
thanks in advance
Mahesh.Gattu

Hi ,
Goto Forms and search for Minisap Download .
u can see posts related to it.
try this link
https://www.sdn.sap.com/irj/sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
to extend minisap license
http://www.sap.com/solutions/netweaver/minisap.epx
reward if helpful
raam

MiniSAP Use for a Thesis Project

Hello guys,
I am a pre-graduate student from a university in Perú. I want to make my thesis implementing let's say a new module in SAP: reports, tables, programs, functions, etc.
I just downloaded MiniSAP to see if it was possible to make it run on my computer and if I could develop there properly.
I have 2 questions.
1. Is it allowed for me in terms of licence and development to make my thesis project in MiniSAP? It is not for commercial purposes. Do I need to have any special access like user on sapnet or something like that to renew my licence each 90 days for continuing my development ?
2. My MiniSAP is installed in a VirtualBox instance with windows server 2003. I have a problem. When I connect from Windows server itself through the SAP logon using the IP address that I get through ipconfig in the cmd, I have no problems, but when I try to do the same from the main system ( Windows 7 ) , I can not get the connection. ( Virtualbox is installed in the Windows 7 ). I also get no response when I ping the IP address of the windows server from Windows 7 .
Edited by: gonzalo1803 on Feb 22, 2011 1:30 PM

Hi,
You can renew your license after 90 days, however, I don't know if this is allowed according to license terms. See part 4 in my blog: [HeiDoc.net|http://www.heidoc.net/joomla/en/development/13-sap-and-xslt/6-tutorial-how-to-install-and-use-the-mini-sap-system]
2. Try disabling the firewall in your VM.
Best wishes,
Jan

Difference between MiniSAP 4.6D and MiniSAP Netweaver

Hi guys,
I was confused with MiniSAP 4.6D and the MiniSAP Netweaver.What is their difference? I am searching for the MiniSAP where I could practice BASIS and ABAP, like R/3 system. But then, there is also a MiniSAP Netweaver. Could you tell me the difference between the two? And which one is free and where to download the right installer I am looking for my need?
Thanks guys.

In any case you cant download MiniSAP 4.6D , now only Netweaver present on SDN for download Also 4.6D it's very old release, try to use Netweaver ...
For learning it good, -->
New Blog Series: ABAP Trial Version for Newbies
Regards.

What is MiniSap? Where can I Download??

Hello
Im new in SAP community can some one tell me what is miniSAP ?? I know is a software but is it a small copy of the SAP software for trainning or what???
I need SAP software because I have to clear the SAP FICO exame. Have this miniSAP the SAP FICO Moduel??
If its have Where can i download it from???
Can some one post the new link who r working??
Regards

For ABAP Books...I will recommend you any of this...
[ABAP Objects: ABAP Programming in SAP NetWeaver |http://www.sappress.com/product.cfm?account=&product=H1934]
[Next Generation ABAP Development |http://www.sappress.com/product.cfm?account=&product=H1986]
I have bought and read both...And they really good -;)
About your FICO query...Well...SAP software is very expensive...Because it's target to large enterprises and not for individuals...
Have you take the FICO course? Or just wanted to do the exam? In the course, they should give you free access to a Sandbox system...Otherwise...You need to work in a company that it's already using SAP...
Greetings,
Blag.

Where can i download Java Slim for minisap netweaver

Folks, where can i download Java Slim for minisap netweaver to implement some solutions of XI for study?
I'm trying to find it on sap download directory but i never find anything...
After all, someone knows if with this version of minisap netweaver i can do some implementations on xi?
Very thanks!

use this link:
http://www.sdn.sap.com/irj/scn/downloads

From where can I download LSMW for Minisap

Hi All,
I am new to SAP....
Can anyone guide me about downloading LSMW for Minisap.
Regards
Justin

Hi Justin,
I feel you did not get a registration number starting with s000XXXXXXX with service.sap.com.
This user id can be used for your login and then at
http://service.sap.com/lsmw , you could see the Download center link wherein you can download LSMW for any of the below.
Legacy System Migration Workbench Version 4.0
Legacy System Migration Workbench Version 3.0
Legacy System Migration Workbench Version 1.8
Legacy System Migration Workbench Version 1.7
Legacy System Migration Workbench Version 1.0
Apart from this link, i do'nt think you can download LSMW authorised manner.
Hope this clear your question.
~thomas
~thomas.

Minisap installation problem on windows 7

Hello all... I am new to the software field and I want to learn sap.
I bought the book ABAP OBJECTS by Horst & Keller, which came with 2 cds.
I was unable to complete the installation because of the following error..
info: INSTGUI.EXE
Protocol version is 10.
Message checksum is 5737383.
Info: INSTGUI MessageFile
Start message loading...
Info: INSTGUI MessageFile
Finished message loading.
Info: InstController Prepare {} {}
R3SETUP Version: Nov 20 2000
Info: InstController Prepare {} {}
Logfile will be set to C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log
Check C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log for further messages.
Info: CommandFileController SyFileVersionSave {} {}
Saving original content of file C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.r3s ...
Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
The CD KERNEL will not be copied.
Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
The CD DATA will not be copied.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
checking host name lookup for 'PHANIDHAR-PC'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
host 'PHANIDHAR-PC' has ip address '192.168.1.121'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
checking host name lookup for 'PHANIDHAR-PC'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
host 'PHANIDHAR-PC' has ip address '192.168.1.121'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
checking host name lookup for 'PHANIDHAR-PC'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
host 'PHANIDHAR-PC' has ip address '192.168.1.121'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
checking host name lookup for 'PHANIDHAR-PC'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
host 'PHANIDHAR-PC' has ip address '192.168.1.121'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
*Error: CALCRAM_NT_MSS ColdKeyCheck 2 178*
*Phase failed.*
*Error: Main {} 2 178*
*Installation aborted.*
Is it possible for installing it on windows7??? Please help me out here.. thank you in advance...

Dear satya
You can install minisap on win 7. Its better to follow this guide.
use
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/25006
and
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20390
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20467
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20668
SIMPLE OVERVIEW
SAP NetWeaver 7.02 ABAP Developer Edition System Requirements:
JRE 1.4.2.x or 1.5.0.x for Installation
Operating System:
Windows 7 Professional or Windows Server 2008R2 (english)
Hostname must not exceed 13 characters
NTFS-File systems
Internet Explorer 6.0 or higher or Firefox 1.0 or higher (newest recommended)
At least 2 GB RAM (recommended 4-8 GB)
Intel Pentium III/1.1 GHz or higher (or compatible)
50 GB hard disk space temporary during installation - 36 GB permanent
High-resolution monitor (1024x768 or higher, 256 colors)
Make sure that no other SAP system is installed on your computer
The SAP system requires serveral ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600 and 8000. A possible entry can be excluded by using the hash symbol (#).
If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. The procedure to install a loopback adapter is documented within the download package.
regars
priyanshann
Edited by: priyanshann on Feb 5, 2012 11:06 AM

SAP R/3 and miniSAP

Hi there,
I am new to SAP and I recently installed SAP R/3 on my computer which i had bought from Ebay...here is a link with the product that i installed.
<a href="http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=ADME:B:EOIBSAA:US:11&Item=180087822187">SAP R/3 From EBAY</a>
Item number: 180087822187 on Ebay.com
However, after reading the introduction to SAP, I have come to realize that what I really needed to buy or install was SAP BW since Business Warehousing is the field that I want to pursue.
My computer has 2 hard drives (C drive has 160gb) and (E drive has 70gb)
SAP R/3 is currently installed on the C drive and works just fine.
I would to install miniSAP on my computer as well. However, I noticed that there was a restriction for installing miniSAP indicating:
"Make sure that no other SAP system is installed on your computer"
Is it possible to install miniSAP on my computer...but instead of installing it on the C drive....put it on the E drive. ?
It would be nice to have both SAP R/3 and SAP BW installed on the different hard-drives.
Please let me know if this is possible or what my options are.
Sorry for the looong story.
thanks
Kenny

If by miniSAP, you are referring to the current sneak previews (since you can't get miniSAP on SDN anymore), then yes, you can install both R/3 and sneak preview (ABAP SP11) on one machine.
That being said, if you really need to only work on BW/BI, then you don't really need R/3. Unfortunately, the download for ABAP SP11 is currently not available, hopefully it will be up soon.

Nedd your help for aceesing database in minisap 4.6 d (please help)

hi all sap masters please help me.
i have installed the minisap 4.6d system in the windows 200 prof os.
i had the following problem in my minisa access.
while Displaying table contents with transactions SE11 or SE16
gives an error "No changes on SAP objects allowed".
while Accessing the logical database F1S gives a syntax error because the
include DBF1SF01 is missing.
so i have used the mbspatch1 that comes with the cd.
i have copied the mbscorr0104200 file in the directory '<MBS_DIR>\trans\tmp' as mentioned.
and i have followed the steps as follows.but i have the same problem.please have a look at the
process below and hel me to make it work roerly.
this roblem is really eating me a lot and since many in this forum are sap master,thought
you all can help me please.
C:\>cd mbs
C:\MBS>dbenv.cmd
C:\MBS>REM Setting environment for db connect to MBS
C:\MBS>set dbms_type=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>cd trans\tmp
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
'R3TRANS' is not recognized as an internal or external command,
operable program or batch file.
hope there was some problem here only,but to continue i have pasted the r3trans in the folder C:\MBS\TRANS\TMP
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
This is R3TRANS version 6.05 (release 46D - 04.10.00 - 09:16:00).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3TRANS finished (0012).
then i have done the generate program step .
(4) Generate programs:
 - Logon as user BCUSER to the MBS system.
 - Start transaction SE38.
 - Enter the program 'SAPLSTRD' and select 'Program -> Generate'.
 - Enter the program 'SAPDBF1S' and select 'Program -> Generate'.
while generating the second program i got the error Accessing the logical database F1S gives a
syntax error because the include DBF1SF01 is missing.
hope somebody could have got the same problem.so please help me with your experience.iam new to this
minisap problems.
again all the roblem of acessing the tables exit even after doing the steps.
hope i have explained my problem very clearly.
please find where i went wrong or suggest some help to acess the datadase tables with the minisap cd.

all webas downloads (ABAP, java)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
webas 6.40 ABAP server
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
SAP gui
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/50072743_4.zip&df=0
Regards
Raja

Problem with accessing database in minisap 4.6 d( very urgent need ur help)

hi all sap masters please help me.
i have installed the minisap 4.6d system in the windows 200 prof os.
i had the following problem in my minisa access.
while Displaying table contents with transactions SE11 or SE16
gives an error "No changes on SAP objects allowed".
while Accessing the logical database F1S gives a syntax error because the
include DBF1SF01 is missing.
so i have used the mbspatch1 that comes with the cd.
i have copied the mbscorr0104200 file in the directory '<MBS_DIR>\trans\tmp' as mentioned.
and i have followed the steps as follows.but i have the same problem.please have a look at the
process below and hel me to make it work roerly.
this roblem is really eating me a lot and since many in this forum are sap master,thought
you all can help me please.
C:\>cd mbs
C:\MBS>dbenv.cmd
C:\MBS>REM Setting environment for db connect to MBS
C:\MBS>set dbms_type=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>cd trans\tmp
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
'R3TRANS' is not recognized as an internal or external command,
operable program or batch file.
hope there was some problem here only,but to continue i have pasted the r3trans in the folder C:\MBS\TRANS\TMP
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
This is R3TRANS version 6.05 (release 46D - 04.10.00 - 09:16:00).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3TRANS finished (0012).
then i have done the generate program step .
(4) Generate programs:
 - Logon as user BCUSER to the MBS system.
 - Start transaction SE38.
 - Enter the program 'SAPLSTRD' and select 'Program -> Generate'.
 - Enter the program 'SAPDBF1S' and select 'Program -> Generate'.
while generating the second program i got the error Accessing the logical database F1S gives a
syntax error because the include DBF1SF01 is missing.
hope somebody could have got the same problem.so please help me with your experience.iam new to this
minisap problems.
again all the problem of acessing the tables exit even after doing the steps.
hope i have explained my problem very clearly.
please find where i went wrong or suggest some help to acess the datadase tables with the minisap cd.

all webas downloads (ABAP, java)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
webas 6.40 ABAP server
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
SAP gui
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/50072743_4.zip&df=0
Regards
Raja

Please help to acess database in minisap 4.6 d

hi all sap masters please help me.
i have installed the minisap 4.6d system in the windows 200 prof os.
i had the following problem in my minisa access.
while Displaying table contents with transactions SE11 or SE16
gives an error "No changes on SAP objects allowed".
while Accessing the logical database F1S gives a syntax error because the
include DBF1SF01 is missing.
so i have used the mbspatch1 that comes with the cd.
i have copied the mbscorr0104200 file in the directory '<MBS_DIR>\trans\tmp' as mentioned.
and i have followed the steps as follows.but i have the same problem.please have a look at the
process below and hel me to make it work roerly.
this roblem is really eating me a lot and since many in this forum are sap master,thought
you all can help me please.
C:\>cd mbs
C:\MBS>dbenv.cmd
C:\MBS>REM Setting environment for db connect to MBS
C:\MBS>set dbms_type=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>cd trans\tmp
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
'R3TRANS' is not recognized as an internal or external command,
operable program or batch file.
hope there was some problem here only,but to continue i have pasted the r3trans in the folder C:\MBS\TRANS\TMP
C:\MBS\TRANS\TMP>r3trans -i mbscorr01042000
This is R3TRANS version 6.05 (release 46D - 04.10.00 - 09:16:00).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
R3TRANS finished (0012).
then i have done the generate program step .
(4) Generate programs:
 - Logon as user BCUSER to the MBS system.
 - Start transaction SE38.
 - Enter the program 'SAPLSTRD' and select 'Program -> Generate'.
 - Enter the program 'SAPDBF1S' and select 'Program -> Generate'.
while generating the second program i got the error Accessing the logical database F1S gives a
syntax error because the include DBF1SF01 is missing.
hope somebody could have got the same problem.so please help me with your experience.iam new to this
minisap problems.
again all the roblem of acessing the tables exit even after doing the steps.
hope i have explained my problem very clearly.
please find where i went wrong or suggest some help to acess the datadase tables with the minisap cd.

all webas downloads (ABAP, java)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
webas 6.40 ABAP server
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
SAP gui
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/50072743_4.zip&df=0
Regards
Raja

How to install Minisap 6.1 in Windows Vista?

Helo gurus, how are you?
Before i install windows vista, i need to know if is possible to install minisap 6.1 with windows vista. Anybody did the installation in windows vista? Are there patches for download or other configs to change??
Anyone asked this before in the forum ( i did not find anything ), so, i am asking now, please help me. Thanks!
If it is not possible, please, answer about others versions of minisap.
4:08 PM
Message was edited by:
        Rodrigo Paisante

I've tried to install Minisap on Vista & get the following error when triggering "Start SAP ABAP Engine":
              ERROR_ACCESS_DENIED: Access is denied. [shmnt.c      2055]
[Thr 980] *** ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      469]
[Thr 980] *** ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
If anyone knows how to fix this problem, please let me know!!!
[email protected]
(South Africa)

Download MiniSap

Similar Messages

Maybe you are looking for