Download O365 installer files using Office Deployment Tool times out...

Hi,
We need to deploy O365ProPlus as part of an operating system image using MDT. I was pointed to this page for instructions:
https://technet.microsoft.com/en-us/library/dn314789.aspx
We first needed to download the source files, so I first downloaded the Office Deployment Tool and used this to download the O365ProPlus image to my MDT server.
I created the following config file (O365x64.xml):
<Configuration>
<Add SourcePath="X:\O365\" OfficeClientEdition="64">
   <Product ID="O365ProPlusRetail" >
     <Language ID="nb-no" />
   </Product>
</Add>
</Configuration>
And I invoke the command to run the Office Deployment Tool:
.\setup.exe /download X:\O365.x64.xml
Then the process creates a folder X:\O365\Office\Data with a couple of 16kb CAB files, but nothing happens apart from this.
What am I doing wrong...? I expect the Office folder to be alteast a gigabyte...
Thanks for comments
Tor

Please first check your network or switch to a different network, then try again.
Additionally, you might want to check if your network setting/firewall setting is blocking any Office 365 IP address/URL:
https://technet.microsoft.com/en-us/library/hh373144.aspx
Regards,
Kapaal

Similar Messages

Steps to deploy Lync for users who own Office 365 E1/E2 licenses, but don't have Office 365 E3, using Office Deployment tool.

After many hours of debugging with Microsoft support the system to install the Lync Client silently can be done with a SINGLE LINE command. The steps to take are below. It should be an easy next step to put this as GPO installation since
it is a simple command.
Comments appreciated.
side question: Why is there no Lync 2013 or Lync Office 365 forum?
Basic steps to deploy Lync for users who own Office 365 E2 licenses, but don’t have Office 365 E3, using Office Deployment tool.
This also applies for other Office 365 service types where the full office suite download is not included. In April 2015 This was impossible to find online and not know by the Lync support team.
Steps are:
Download the Office deployment tool from
http://www.microsoft.com/en-in/download/details.aspx?id=36778 and extract it to a folder. For this
example we will use the \\server\sharename
location.
Extracting it creates a setup.exe file and it show a sample XML file.
2. Create XML file and give it a name such as LyncEntryRetail.xml
Note: The key is the productID that has to be the “LyncEntryRetail”. Other product IDs will download a version that needs another office 365 license. The productID “LyncRetail” needs an E3 license of Office 365.
<Configuration>
<Add SourcePath="\\server\sharename" OfficeClientEdition="32" >
    <Product ID="LyncEntryRetail">
      <Language ID="en-us" />
    </Product>
</Add>
</Configuration>
3. From the folder where you extracted the Office deployment tool, run the following command on the command prompt to download the source files and store them on the shared drive:
(on single line)
Setup.exe /download LyncEntryRetail.xml
(This is the name of the XML file created above)
One can also run the same on a server share by using UNC path names such as (on single line)
\\servername\sharename\Setup.exe /download
\\servername\sharename\LyncEntryRetail.xml
(This is the name of the XML file created above)
4. Run the following command on the command prompt on a machine where you want to install the software: (on single line)
\\servername\sharename\Setup.exe /configure
\\servername\sharename\LyncEntryRetail.xml
(This is the name of the XML file created above)
Once you are comfortable that it all works, you may want to edit the XML file if you want to have silent installation and add the following lines.
<Display Level="None" AcceptEULA="TRUE" />
<Property Name="AUTOACTIVATE" Value="1" />
Regards
Bart
Bart Louwagie

Hi Chudly，
For the office365 issue, I also recommend you can post in dedicated forum for more efficient support:
http://community.office365.com/en-us/f/166.aspx
If you want to modify the powershell script, please post the current script and the issue, we will notice and continue to follow up.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to download lion installation files using windows

Hi,
I installing a SSD into my new Macbook Pro and need to download Lion so I can do a clean install.
My problem is that I only have 1GB download limit at home so I would like to download at work. But work only has Windows based machines. Is there anyway to download it on a windows?
The nearest Apple store is 2 hours drive away, and I cannot connect my Mac into the work network.
Any suggestions?
Thanks

You didn't mention a redemption code.
You can download it, on a Mac. Do you know someone with a wireless network and a large download limit?
I would seriously be looking at updating your Internet Plan. A standard update of any OS (Not just the inital Lion download) will wipe out your allowance in one hit. If you want to keep your system up to date, you will find it almost impossible on 1GB of monthly download data. Even if you bought Snow Leopard and installed it, the updates would well outweigh your allowance.
Cheers

Office Deployment Tool Help

Alright, further troubleshooting for any other boys and girls that may tune in with this issue.I tweaked my XML file (see updated version).
The logging is now working (attached error log), and showing Download failed for c:\o365\office\data\15.0.4737.1003\i641033.cabI looked in that folder c:\o365\office, didn't see those cab files!
I made sure my user account had read/write/modify rights to that c:\o365\office folder that was auto generated/downloaded and it contains cab files I reran the setup.exe /download install.xml, it redownloaded the files, and the cab files are now showing up!I then reran the setup.exe /configure install.xml and the officeclicktorun.exe process is now running in the background, and installing the software.
It's hard to say if it was a rights issue, or an issue with the download not...

Hello, trying a basic Office 365 installation using the Office Deployment Tool per https://technet.microsoft.com/en-us/library/JJ219423.aspx
Attached my XML file
For testing purposes, current set up under c:\o365
Ran setup.exe /download c:\o365\configuration.xml and the "Office" folder appeared with the install bits.
Ran setup.exe /configure c:\o365\configuration.xml and receive error message "Couldn't Install. Check internet connection / hard drive space. Error Code: 30088-1021 (0)"
Verified Windows Firewall turned off, AV turned off, and plenty of hard drive space.
Any advice welcome. Thanks!
This topic first appeared in the Spiceworks Community

Office Deployment tool not trying to install 32 bit verion where OfficeClientEdition is set to 32

We used the Office Deployment tool to download the 32 bit version of Office 2013. Now when we try to deploy the 32 bit version we received an error. This is on a 64 bit Windows 7 PC.
Here is the configuration XML file
<Configuration>
     <Add OfficeClientEdition="32">
     <Product ID="O365ProPlusRetail">
           <Language ID="en-us" />
        </Product>
     </Add>
     <Logging Path="C:\Temp" />
</Configuration
Here is the line in the log file that shows the download error.
FileDownload::Download: Download failed for "C:\Users\swessmi\Desktop\Office_Deployment_Tool\Office\Data\15.0.4615.1002\i641033.cab", try 0. {"SessionID":"47a04060-d70c-4af4-be4d-dc5b1428c60b","GeoID":"244","Ver":"15.0.4619.1000","ErrorCode":"2","ErrorMessage":"ErrorCodeOnly
(Failed to copy file src: C:\Users\swessmi\Desktop\Office_Deployment_Tool\Office\Data\15.0.4615.1002\i641033.cab, dest: C:\Users\swessmi\AppData\Local\Temp\OfficeC2R97A92F51\i641033.cab , Error:0x2)","AppVErrorSource":"","ErrorType":"2"}
The Deployment tool is looking for the i641033.cab file which is the 64 bit version. We want to install the 32 bit version so we did not download the 64 bit version.
If I try to install the 64 bit version by changing the OfficeClientEdition="64" the deployment tool installs the 64 bit version fine from the internet as I have not downloaded the 64 bit version.

Hi,
As tested, i641033.cab is also part of 32-bits Office installation source. When you have 32-bits Office downloaded, you should see i641033.cab under ...\Office\Data\15.0.4615.1002\ (in your case).
Looks like the installer was having an issue downloading i641033.cab, try to download the source file again, or manually download i641033.cab, then try again.
Some useful threads:
http://community.office365.com/en-us/f/156/t/159359.aspx
http://ganey.co.uk/?news=Couldnt%20Install%20Office%20365,%20Check%20Internet%20Connection,%20Disk%20Space&n=155
Thanks,
Ethan Hua CHN
TechNet Community Support

Office Deployment Tool Config for 2013 Pro Plus

Hi!
   I'm trying to update an installation of Microsoft Office Professional Plus 2013 and wonder if somebody could help me with the correct Product ID to use for the Office Deployment Tool configuration.xml file? Almost all the examples seem to
use O365ProPlusRetail.
   The configuration documentation here discusses only Office 365: http://technet.microsoft.com/en-us/library/jj219426%28v=office.15%29.aspx
   But it links to this page, which lists product IDs, but no description (thank you not very much!): http://support.microsoft.com/kb/2842297/en-us
   There's a "ProfessionalRetail" there; elsewhere I've seen a "ProPlusRetail" which isn't listed there, and I'm hoping that if I get the right Product ID I can get this cantankerous update process to work!
   Thanks much,
       Rob

Hi,
Microsoft have used some rather confusing product marketing terms, which makes it hard to get clear, and also to be clear, when it comes to this release of Office :(
Office 2013ProfessionalPlus - installation uses the classic setup.exe + MSI engine. Can be updated via WSUS.
Office365ProPlus - installation uses the new ODT, and results in C2R virtualized "installation". Can't be updated via WSUS.
So, if you're using the ODT, then you're not using Office2013ProfessionalPlus..
Reference for the Product element:
http://technet.microsoft.com/en-us/library/jj219426(v=office.15).aspx#BKMK_ProductElement
Reference including Retail Product elements:
http://support.microsoft.com/kb/2842297/en-au
NB: the update process will probably be cantankerous even after you get it working ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Office Deployment Tool

Hi We just licensed a lot of computers with Office 365 Enterprise 3.. or E3
I wanna deploy office 2013, .. I'm unsure of what I actually got the rights to download
I can't figure out if E3, gives me permission to get Ofice 2013, Pro Plus?
http://support.microsoft.com/kb/2842297
Can I get it anyway for offline install?

Hi，
For Office 365 E3 subscription, you should use O365ProPlusRetail
as the product ID in the Configuration.XML file while downloading Office with Office Deployment Tool.
You can download (with the /download mode of ODT) the build to a local path first, then configure it to all the machines without the need of Internet access.
Here is the reference you'll need:
http://technet.microsoft.com/en-us/library/jj219422(v=office.15).aspx#BKMK_Download
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Office Deployment Tool Packager Error

I've successfully downloaded Visio Pro and Std using the deployment tool. When I run setup with the /packager switch, both versions error out with the following message in Flattener.log. The source and destination directories are both local
so no network issues.
Any help would be appreciated. Thank you
Flattener.exe Generating registry hive.
Flattener.exe : ERROR : Packaging FAILED: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
Exception (outer): The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
ST (outer):   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<PreparePackage>b__a(Exception exception)
   at Microsoft.ApplicationVirtualization.Packaging.ExceptionGuard`1.Guard(Action logStart, Action execute, Action logEnd, Action`1 exceptionAction)
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.PreparePackage()
   at Microsoft.ApplicationVirtualization.Packaging.Packager.PreparePackage(Func`2[] subsystemCreators, String installPath, Predicate`1 excludeFile, Predicate`1 excludeKey)
   at Microsoft.ApplicationVirtualization.Packaging.Packager.PreparePackage(String ingredientsPath, String manifestPath, String oldManifestPath, String registryHivePath, String installPath, Predicate`1 excludeFile, Predicate`1 excludeKey, PackagingEngineType
engineType)
   at Microsoft.ApplicationVirtualization.Packaging.IsvPackager.PreparePackage(String ingredientsPath, String manifestPath, String registryHivePath, String installPath)
   at Microsoft.Tools.Office.C2R.Packager.PackageAsFile.CreatePackage(String ingredientsXmlFileIn, String destinationPackageFilePath, Int32 countOfFilesToAdd, String manifestFileIn, String manifestLocFileIn, String streamMapIn, String productName,
String packageGUID, String packagePlatform, String packageVersion, String appID, String manifestFileOut, String registryHiveFileOut, String installPath, JobType jobType, String workingDir, CompressionOption compressionOption, VFontsType vfontsType, ArrayList
comEPClassToInclude, ArrayList comEPInterfaceToInclude, ArrayList comEPTypeLibToInclude, Boolean isLaunchedByFlattener)
Exception (inner): The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format
ST (inner):   at Microsoft.ApplicationVirtualization.Packaging.HiveLoader.ThrowExceptionOnError(Int32 result)
   at Microsoft.ApplicationVirtualization.Packaging.HiveLoader..ctor(String hiveFilePath, String hiveSubkey, RegLoadKeyApi RegLoadKey, RegUnLoadKeyApi RegUnLoadKey)
   at Microsoft.ApplicationVirtualization.Packaging.HiveLoader..ctor(String hiveFilePath, String hiveSubkey)
   at Microsoft.ApplicationVirtualization.Packaging.RegistryPackagingSubsystem.<.ctor>b__1(String filePath, String subkey)
   at Microsoft.ApplicationVirtualization.Packaging.RegistryPackagingSubsystem.<>c__DisplayClass9.<.ctor>b__4(Object sender, CommonPreEventArgs args)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.OnPreparePackage()
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<PreparePackage>b__8()
   at Microsoft.ApplicationVirtualization.Packaging.WithAppCorruptionCheck.Execute(Action execute, Action`1 logCorruption)
   at Microsoft.ApplicationVirtualization.Packaging.WithAppCorruptionCheck.Execute(Action execute)
   at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<PreparePackage>b__7()
   at Microsoft.ApplicationVirtualization.Packaging.ExceptionGuard`1.Guard(Action logStart, Action execute, Action logEnd, Action`1 exceptionAction)
Flattener.exe : ERROR : Abandoning build due to fatal error
ST:   at Microsoft.Tools.Office.C2R.Packager.Log.Message(String message, SEV type, String messageID, Boolean logToConsole, Boolean logPrefix)
   at Microsoft.Tools.Office.C2R.Packager.Log.Message(String message, SEV type)
   at Microsoft.Tools.Office.C2R.Packager.PackageAsFile.CreatePackage(String ingredientsXmlFileIn, String destinationPackageFilePath, Int32 countOfFilesToAdd, String manifestFileIn, String manifestLocFileIn, String streamMapIn, String productName,
String packageGUID, String packagePlatform, String packageVersion, String appID, String manifestFileOut, String registryHiveFileOut, String installPath, JobType jobType, String workingDir, CompressionOption compressionOption, VFontsType vfontsType, ArrayList
comEPClassToInclude, ArrayList comEPInterfaceToInclude, ArrayList comEPTypeLibToInclude, Boolean isLaunchedByFlattener)
   at Microsoft.Tools.Office.C2R.Packager.Package.PackageFromOptions(Options options, Boolean closeLogFile, String binaryIdPackageMap)
Flattener.exe : ERROR : ERROR: Abandoning build due to fatal error :    at Microsoft.Tools.Office.C2R.Packager.Log.Message(String message, SEV type, String messageID, Boolean logToConsole, Boolean logPrefix)
   at Microsoft.Tools.Office.C2R.Packager.Package.PackageFromOptions(Options options, Boolean closeLogFile, String binaryIdPackageMap)
   at Flattener.Flattener.CreateAppVPackageFromOptions(String packagerArguments)
   at Flattener.Flattener.CreateAppVPackage()
   at Flattener.Flattener.Run(String[] args)

I've successfully downloaded Visio Pro and Std using the deployment tool.
Are you sure all the source files have downloaded from the MS CDN correctly and successfully ?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to save downloaded update installer files

How can I locate a downloaded update installer file so I can save it and use to install on another mac without having to download all over again? Today I downloaded updates for OS X and also for Office 2011. The first is over 2GB and the second around 300MB. I have installed on my Macbook Pro, but I have another 3 units to update. I live in a 3rd world country with very slow internet and it takes me days to download such files.

Grateful for you having replied but for some reason I seem unable to open your message "Re: How to save downloaded update installer files". Waikato99

Error in Office Deployment tool

hi,
Error in Office Deployment tool
Any known issue? tnx

I've seem the same problem twice today. Check your local network status and disable filewall/AVG to try it again.
You may also refer to the answer in my another threads and let me know your update. Thanks.
http://social.technet.microsoft.com/Forums/en-US/de716bad-ad39-4dc6-a473-c43574afd942/office-deployment-tool-fails-to-download-source-files?forum=offi
Tony Chen
TechNet Community Support

2012 I purchased CS6 Design & Web premium for students for WINDOWS. Now I want to buy a macbook. Can I download the installation files for MAC OS X with my licensed serial number for free?

2012 I purchased CS6 Design & Web premium for students for WINDOWS. Now I want to buy a macbook. Can I download the installation files for MAC OS X with my licensed serial number for free?

Hi There,
We would like to inform you that you have got the serial number for Mac, it would not work on Mac machine as it is OS specific.
If you wish you use a mac machine that you can swap the platform please refer the below mentioned link.
Link: Order product | Platform, language swap.
Contact support via : Contact Customer Care
Thanks,
Atul Saini

I lost the installation disks for CS4 master collection. Where can I download the installation file?

Hello,
I lost the installation disks for CS4 master collection polish version. Where can I download the installation file?

Hi filmowka,
Welcome to the Community!
Go to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and choose Master collection CS4 from the list.
Follow the Very Important Section else the download will not start.
Thanks!
Ankit

How to download a text file using classes

Hi Guys
I want to download a text file using classes.
Any idea how to do it ?
Thanks
Sameer

HI sameer,
   It is no different from using a Function module.
example:
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      filename                  = w_fpath
    append                    = SPACE
      write_field_separator     = 'X'
    CHANGING
      data_tab                  = it_download
    EXCEPTIONS
      file_write_error          = 1
      no_batch                  = 2
      gui_refuse_filetransfer   = 3
      invalid_type              = 4
      no_authority              = 5
      unknown_error             = 6
      header_not_allowed        = 7
      separator_not_allowed     = 8
      filesize_not_allowed      = 9
      header_too_long           = 10
      dp_error_create           = 11
      dp_error_send             = 12
      dp_error_write            = 13
      unknown_dp_error          = 14
      access_denied             = 15
      dp_out_of_memory          = 16
      disk_full                 = 17
      dp_timeout                = 18
      file_not_found            = 19
      dataprovider_exception    = 20
      control_flush_error       = 21
      not_supported_by_gui      = 22
      error_no_gui              = 23
      OTHERS                    = 24
Regards,
ravi

Why can't I download a pdf file using internet explorer as my browser.I can download pdfs using fire

Why can't I download a pdf file using internet explorer as my browser. I can download pdfs using firefox.

Gilad D,
Thanks for the support.
I would guess the plugin is enabled since when I use Foxfire as my browser, all pdfs download and are readable. (just doesn’t happen when I use IE as my browser, I get a blank screen with a small “x” in the upper left corner)
I will try your proposed solution.
Charlie

Just completed the redemption process. Where's the download and installation files?

Just completed the redemption process. Where's the download and installation files?

Go to App Store > Purchases to check the OS X download progress. The installer is stored in Applications folder

Download O365 installer files using Office Deployment Tool times out...

Similar Messages

Maybe you are looking for