Download of hierarchy nodes and accounts from BW

Hi,
Does anyone know how to download a list of the hierarchy nodes and accounts out of BW? I need the list to work on some analysis and documentation.
Thanks in advance.

Hi Jackie,
Have you seen this document:How to Download a Hierarchy to a Flat File
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
Hope this helps...

Similar Messages

  • How do I set up my email account on my iMac OS Yosemite 10.10.2 so that the emails are downloaded to my computer and removed from the ISP server?

    how do I set up my email account on my iMac OS Yosemite 10.10.2 so that the emails are downloaded to my computer and removed from the ISP server?

    When setting up the email using Apple 'Mail' (version 8.2 (2070.6)) I do not get an option to set up my email as using POP.  I can go to Outlook from Microsoft and I get a chance to set my mail up using POP, however I would prefer to use the Apple supplied 'Mail' email programme as I'm using Office 365 and may not want to continue the subscription sometime in the future.
    Any advice on setting Mail to POP would be appreciated.  A not so Happy Wombat.

  • Cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    Have you done any of the following?
    http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
    Repaired permissions & restarted your comp after the installations of the drivers?
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    What to do when you can't print
    =============
    not working with OS X yosemite 10.10.1
    Per your profile
    Mac OS X (10.7.3)
    Conflicting info:  Please update/correct your profile so that you can receive the correct troubleshooting suggestions.  This will assist the users in trying to help you.  Thank you.

  • How migrate all mail (boxes and accounts) from 10.6.8 on Mavericks (without Migration Assistant)?

    How migrate all mail (boxes and accounts) from 10.6.8 on Mavericks (without Migration Assistant)? Install the system (10.9.1) on a blank disk, copied the program and set up manually. Mail accounts and folders does not work to install and configure. Migration Assistant does not want to use, as it copies everything, and you only need to e-mail. Read a lot, but nothing works.

    Try reindexing the mailbox. This can take awhile if you have a lot of mail.
    Reindex messages.
    If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
    Quit the application.
    You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3.  Move the file to your desktop.
    Open the application and test. If it works okay, delete the file from the desktop.
    If the application is the same, return thefile to where you got it from, overwriting the newer ones.
    If you prefer to make your User library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Difference between hierarchy node and single value

    Hi experts,
    Can anyone explain me the difference between hierarchy node and single value?
    This is my problem:
    I have a query that uses a characteristic (0ORGUNIT) with a hierarchy and I execute it without any problem but when I try to set a fliter on this characteristic and I try to find a single value, for example 101, it doesn't appear in the single value list, instead it appears in the hierarchy nodes list in the selection window.
    I think I'm confused about both terms because I thought  a hierarchy node was always the one who has one or more values as its lower levels like this:
    A. 10
        A1.  100
        A2.  101
        A3.  102
             A3.1.  1021
    B. 11
    I this case I thought , for example, 101 was a single value but not a hierarchy node so I must find it in the single values list in the selection window, however, 102 can be both and must appear in both lists, is it true?
    Thanks in advanced

    In BW, hierarchy node with more information compare to the single value. for example, it always carries its father node information, which it belongs to. and some time information if it is time-dependent.
    So, when you using hierarchy node, it means at least 2 information: value and "position" (who is its father node)
    That's the reason why you see the hierarchy tree when choosing the node.
    If you want to expand the hierarchy to the certain level, you can setting in the property. Another choice is restrict in the query designer.

  • Lack of texts in hierarchy nodes and leafs for 0ORGUNIT

    Hello experts!
    We have the BCT hierarchy 0ORGUNIT in BW exporting his time-dependent structure from R/3. Now, for some leafes and some nodes above the leaf we have no texts just see the key.
    Has someone an idea what the problem could be? In R/3 we have the text and in master data of 0ORGUNIT we also have the text within the right time period...
    Thanks for help!
    Best reagards,
    Peter

    I'm not sure I understand what you are suggesting. Here is the data we have:
    Hierarchy             Key Figure
    - CC 0001 (node)      30.56
      CC 0001 (leaf)          6.45
      - CC 0002 (node)       24.11
           CC 0002 (leaf)     6.45
           CC 0003 (leaf)     5.72
           CC 0004 (leaf)     7.47
           CC 0005 (leaf)     4.47
    We want the value 6.45 to show up next to the CC 0002 hierarchy node, since that is the value for that cc. And we want the 6.45 to show up against the cc 0001 node rather than adding everything beneath it. What you suggested below - is that a display option in the query, or where do I do it?
    Thanks.

  • Hierarchy Node Intial load from R/3 to CRM 5.2

    Hi
    I have this problem when download form R/3 4.6c to CRM 5.2 hierarchy node.
    Can you help me?
    It's very important because we are blocked.
    Thanks
    Best regards.
    we downloaded the following customer hierarchy:
    0002189004
    - 0002199004
    - 0002190509
    - 0002010050
    using the object DNL_BUPA_KNVH.
    In this way the table CRM_KNVH_TEMP has been filled correctly with all
    the structure.
    We executed the BPH_DNL transaction selecting only the hierarchy type
    D,
    and the sales org D468, distr chann 01 , divsion 99.
    After saving the hierarchy we created all the hierarchy structure in
    CRM but there are not any customers linked to the related hierachy node.In particular we found the followng situation:
    table BUT_HIER_NODE, filled with all the hierarchy node
    table BUT_HIER_NODE_D fille with all the descrption of the hiarachy
    node in english language
    table BUT_HIER_STRUCT filled with the structure and the link between
    node
    tables BUT_HIER_TREE,. BUT_HIER_TREE_d filled with all our hiearcy type
    table BUT_HIER_NODE_BP empty
    also:
    the method "assign_bp_to_node" is only executed in the the private
    method
    "change_record" but it is commented in the method "create record" and
    also
    "build_crm_tree".
    In conclusion the method "start_initial_down_load2 (executed int the
    function CRM_BUHI_INITIAL_DOWNLOAD) call the method 2build_crm_tree2,
    but this method never execute "assign_bp_to_node".

    I have found a propoer articulation of my problem in SAP note 429423. It goes as follows:
    <i>"No entry exists in one of the queues, but the status in R3AM1 remains 'Running':
    In this case, probably no reply is sent to the CRM Server after the data selection in the source system.If this is the case for an adapter object but not for others, contact the respective application component which can analyze why the source system does not send a reply and correct it.
    If this system response occurs for all adapter objects, create a message for component CRM-MW-ADP."</i>
    However, I am unable to act on the above. Kindly suggest what exactly needs to be done as suggested in the note.

  • Restric to hierarchy nodes and characteristics at the same time

    Hi together,
    I've got a profit center hierarchy and an authorization object with those fields:
    0CO_AREA
    0PROFIT_CTR
    0TCTAUTHH
    The controling area is compounded to the profitcenter.
    Then I created an authorization definition for hierarchies where i added a node from my profit center hierarchy.
    But aditionaly I want to add a single Profit center, which is not below this node. but it does not work. I only get the profit centers below the node i maintained for the hierarchy authorization and not the single entry for the profit center
    How can I setup this situation where I need to maintain on the one side one or more nodes in a hierarchy and then a single profit center which might be under another hierarchy node although this node is not explicitly allowed?
    Kind regards
    Stefan

    Thanks for the reply.  This issue is becoming a major problem for lots of implementations.  I have sent out several forum and OSS on this but no solution.

  • HT201272 Im having problems downloading already purchased music and videos from my iphone 4s

    When i try to download already purchased music and tv shows it keeps asking for user id and password and still doesn't allow me to download...HELP!

    Open itunes, connect iphone, click File>Transfer Purchases.

  • HT3529 how do i download all my photos and videos from my i phone to my computer?

    How do I download all my photos and videos to my computer to clear up space on my I phone?

    This will describe how to import them: http://support.apple.com/kb/HT4083.  You will be given an option to delete them after importing if you wish to do so.

  • I downloaded all my photos and videos from my iPhone, suddenly they are all gone events photos everything my folders. The works. How can i recover them

    All my downloaded photos from iphone as well as vid camera are gone. I was asked a question when trying to put a photo into iphoto and suddenly all events faces, folders were gone. how do i recover them.

    You shoud be importing them to your computer regularly as you would with any digital camera.
    Have you failed to do this?

  • Print Problem : Print descriptio​n and tips from structures​, nodes and loops from block diagram

    Hello,
    I've just completed the entire documentation of my VI and I did describe some Case structures and Formula Nodes. Now I want to print the VI with the VI printer and when I select ''Description'' in the custom printer manager, it doesn't select the description from most functions in the block diagram such as Formula Node, Case Structure,etc. 
    Is there a way to get these descriptions in the printed version VI ?
    Thanks a lot !
    Solved!
    Go to Solution.

    Hi Weepet,
    After some investigation, it turns out that this behavior is expected behavior.  Please see the following help topic
    http://zone.ni.com/reference/en-XX/help/371361G-01​/lvhowto/creating_vi_and_object_de/
    Essentially, Context Help will only display the description for controls, indicators, and constants.  At the same time, the descriptions will only print if that description is available in context help.  LabVIEW primitives will always use the description from the documentation, and will not display your custom "Description and Tips".  So, for primitives like case structures and formula nodes, we cannot get that information to print. The behavior that you're seeing is expected.
    Perhaps you can just use comments to document these functions?  You can double click on a blank area of the block diagram and provide comments.
    Regards,
    Che T.
    Applications Engineer
    National Instruments

  • HT1414 I have Windows and I am trying to download stuff like pictures and music from my laptop, but it's not letting me. What am I doing wrong?

    I am currently try to download music from Rhapsody to my daughter Ipod Touch 4th Generation. I have made the Apple ID: and went through the whole thing, but once the Ipod is plugged into my computer it doesn't show up in my media. What am I doing wrong?

    You have to import the music into your iTunes library and then sync it to your iPod
    iTunes 11 for Windows: Syncing overview
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    iOS and iPod: Syncing photos using iTunes

  • I want to remove a friends itunes library and account from my hp netbook

    A friend set up their original account on my pc; how do I remove it? I don't want their library or account on my hardware... a reinstall of itunes made no difference.
    Thanks

    Several ways.  Easiest it probably copy whole iTunes folder to a different location.  Start iTunes while holding down the option/alt key, select the iTunes Library.itl file in the duplicated folder then delete what you don't want.
    Yu can also create a new, blank library using the above method.  Export playlist from library 1, restart iTunes with library 2, import playlist.
    I don't have iTunes Match.  I'm not sure how it will react to a second library.

  • Why can't i download e-mail attachments and images from the web using firefox browser

    i am using a Mac laptop.
    when i try to download my e-maill attachments, the Download tab appears. but when i click the download "key", nothing happens.
    i also can't save images from the web using firefox. the Save this Image tab appears but when i try to save, nothing happens.
    when i check on my Downloads folder, only unreadable files like these appear:
    1ttOnsY3.doc.part
    2Sf9jyNT.doc.part
    62+fxHoe.doc.part
    ASx1ZO9N.xls.part
    BtRlxR4R.exe.part
    dZmKC1nU.doc.part
    ehmb9rox.doc.part
    FJx+ku02.doc.part
    FSR7ckkV.doc.part
    hvlqg5Qy.exe.part
    JwVExec0.doc.part
    KEBM+klW.doc.part
    but when i try to use my Safari browser, download is successful.
    ive tried reinstalling my Firefox (version 3.6) but to no avail

    Not all 10g links are wrong however a number of them are as follows:
    Oracle ADF Installer (10.1.3.2) (Version 10.1.3.2, build 4066)
    Oracle ADF Installer (10.1.3.1) (Version 10.1.3.1, build 3984)
    Oracle JDeveloper 10g (Version 10.1.2.3, build 1936)
    Oracle JDeveloper 10g (Version 10.1.2.2, build 1929)
    Oracle JDeveloper 10g (Version 10.1.2.1, build 1913)
    Oracle JDeveloper 10g (Version 10.1.2, build 1811)
    All update this post once resolved.
    Thanks for the notification

Maybe you are looking for