Download of Oracle Client Failed Twice!

I am trying to download the client software for Oracle 9i. I am currently trying for the 3rd time. Both previous attempts hung at 99% complete and 1 second remaining. What gives?!
Is there any other way to get the client software without having to download 596 MB? This is horrendously large! What's up with that? Neither Sybase client nor MS SQL Server client is anywhere near that big. It takes well over an hour to get to 99% complete, and then it hangs. Sorry for the ranting, but this is ridiculous!

with the client download:
I am having the same problem...it stops at 99% and does not respond again. Have you found a solution?

Similar Messages

  • Download of Oracle client 10gR1

    Hi,
    I would like to install an Oracle client 10gR1 on Windows (R1 client needed because our server is R1, and I get errors with exp.exe with a R2 client).
    I didn't found any download file for 10gR1 on Oracle Web site, only for 10gR2.
    please help !
    regards
    Bertrand

    For my export problem, it seems to be a version problem and I need a 10gR1 version
    this error occurs with exp.exe:
    EXP-00056: ORACLE error 6550 encountered
    ORA-06550: line 1, column 41:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 15:
    PL/SQL: Statement ignored
    EXP-00000: Export terminated unsuccessfully
    after looking on forums, installing 10gR1 should solve this problem

  • Cannot download Oracle Client 9.2.0.1

    Hi,
    I'm tring to download the oracle client 9.2.0.1, but when I click on 92010NT_CLT.zip I always receive the message "The page cannot be displayed".
    Please let me know if you have some network problem or my Browser configuration are wrong.
    Best Regards,
    Alfredo Ingenito.

    I have posted your question in the Downloads Issues. The people who monitor that forum should be able to help you.
    Please check this thread for more information:
    Not Able to download Oracle Client 9.2.0.1 - ASAP
    I apologize for the inconvenience.

  • Download Oracle client

    I tried to download an Oracle client. My download did not included a Setup.exe. Where is the proper download?
    I need Oracle database drivers and an installer with a custom install option.

    If you're looking for ODP.NET and OLE DB, I would recommend using the ODAC install here:
    Oracle .NET Software Downloads
    These are all available with a custom install option.

  • Oracle Client patch 8.1.7.1.5, in relation to COM

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version
    - O/S + Version
    - Error Msg

    Does anyone know where I can download the Oracle Client patch 8.1.7.1.5?
    Also, can anyone help with the following problem? I'm having problems
    creating a Oracle Service for MTS, error message: "Unable to read
    registry values! Failed.".
    Regards,
    Jaeson

  • PHP5 OCI8 Oracle Client on MacOS X Leopard - Installation Script

    Hello,
    There is a new bash scripts for the installation and configuration of Apache2, PHP5, Oracle Client v10.2 and OCI8 on MacOS X running Leopard. The script was tested on Leopard 10.5.4. It should work with the pervious versions of Leopard but I doubt it will work on Tiger.
    The script MacOracleViaPHP.sh will automate the whole setup. It can be found here http://www.danilovizzarro.it/script/MacOracleViaPHP.sh
    In order to have it working it's required to download the oracle client basic, SDK, SqlPlus, Apache2, PHP5 and OCI8 in the /root directory.
    A step-by-step tutorial + video demo can be found here http://www.danilovizzarro.it/?p=11
    BR
    DV

    This could be the start of a great series!
    In the intro, the in-video explanation text could say where the files come from and what they do.
    Over half of the video consists of updating Ubuntu packages (e.g the kernel!) - this makes the video harder to follow and makes the installation seem harder than it really is. It also doesn't match the statement that the OS has been installed. If viewers think the install requires a lot of extra files and OS changes, you might frighten people from doing the install.
    Setting the root password and not disabling it again is not the best example of security. Why not just "sudo gnome-terminal" or "sudo xterm" ?
    For visual clarity, I'd suggest removing the window translucency.
    -- cj

  • Oracle Client and SqlPlus on Mac Os X Leopard Configuration Script

    Hello,
    I have just written 2 bash scripts for the installation and configuration of SqlPlus and the Oracle Client v10.2.
    The first script MacSqlPlus.sh install the client set the environment variables, the second TNSconnectMac.sh help to configure the tnsnames.ora. They can be found here
    http://www.danilovizzarro.it/script/MacSqlPlus.sh
    http://www.danilovizzarro.it/script/TNSconnectMac.sh
    In order to have them working it's required to download the oracle client basic lite and SqlPlus in the /var/root directory.
    A step-by-step tutorial can be found here http://www.danilovizzarro.it/?p=10
    Soon I will try to upload a demonstration video.
    Your comments are always appreciated.
    BR
    DV

    Doug,
    It is possible that there could be data corruption, because this is not a tested, thus not supported, setup. I hope that helps!

  • ODBC setup error for Oracle Client

    Hi,
    I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
    1. Downloaded the Oracle Client from the link http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:\Oracle\instantclient_11_2.
    2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:\Oracle\instantclient_11_2, ran odbc_install.
    3.Created the Environment variables as
    i) *TNS_ADMIN - C:\Oracle\instantclient_11_2*
    ii) *Oracle_Home - C:\Oracle\instantclient_11_2*
    iii) *Edited the PATH variable with ;C:\Oracle\instantclient_11_2*
    4. Created the tnsnames.ora file in C:\Oracle\instantclient_11_2. Its content are as follows.
    clarity_dev =
         (DESCRIPTION =
         (ADDRESS_LIST =
         (ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521))
         (CONNECT_DATA =
         (SID = clarity)
    5. From the folder %windir%\sysWOW64\odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
    Data Source Name : claritydev.vip.its.com
    TNS Service Name : clarity_dev
    User Id: clarity1
    When I test connect it, I get error *ORA-12154:*
    *     TNS:could not resolve the connect identifier specified*
    Could you please help, I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
    Thanks in Advance
    Sreeram

    Oh, zip files. Right. I usually use the installer.
    Try creating it yourself then and see if that does it. I don't normally use these zip files so I'm not sure if it goes somewhere else with them.

  • Oracle Client Download for Windows XP

    Is it possible to get the Oracle Client download for Windows XP?
    Thanks,
    Cherie Machler

    http://download.oracle.com
    http://lmgtfy.com/?q=How+to+Oracle+Client+Download+for+Windows+XP

  • Where to download Oracle client installation .exe file

    Hi,
    I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
    I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
    I can't find a .exe installation file, does anyone one know if there is a .exe file available and if so where can I download it? I have just found .jar installation files.

    user11207131 wrote:
    Guys,
    Sorry for hijacking this thread – what would you recommend to run ODP.NET on 2008 R2?
    Do I need to install Instant Client 11.1.0.7.0 and ODAC10203 on top?In addition to asking in the "I have a problem with getting a download" forum, you could ask in the "Windows and .NET >> ODP.NET" forum at ODP.NET

  • From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.

    From where I can download Oracle Client 11g R2 for Windows 7 64bit? Thanks in advance.

    Search engine broken?
    Just search for Oracle 11g download and you get this link on the very first page
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
    Then select 'See All' from the Microsoft Windows (x64) in the Oracle Database 11g Release 2 section
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
    Can we assume you know how to search that web page for the word 'Client'?

  • Nslookup fails were as tnsping works - Oracle Client on Linux 4.0

    Hello Gurus,
    I am able to connect to Oracle DB on the Linux server and not from Oracle client on Linux box. I have installed Oracle Client windows version on my laptop and same release and version for Linux on Linux box.
    When I try to connect to the DB from Oracle Client installed on Linux box give me ORA-012545:Connect failed because target host or object does not exists.
    I have tried tnsping and the server name (hostname) ,IP and DB of the server it works.
    When I tried nslookup servername (hostname) , IP and DB it fails.
    Anyone over there please help me out. This is something silly happening works on Windows Oracle client and not on Linux Oracle Client. One thing to do add Linux Oracle Client has Virtual IP to it. ITs host file has an entry for local host as follows : 127.0.0.1 localhost.local.domain localhost.
    Also when I tried to create netservice names using netca it's just clean.
    Please help me.
    Thanks in advance
    Thanks
    Shiva

    Hello Matt,
    The reults
    [oracle@ccsdd-sdap3 admin]$ tnsping mdb
    TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 12-MAY-2008 10:20:16
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /oracle/app/oracle/product/10.2/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.17.180.110)(PORT = 1521))) (CONNECT_DATA = (SID = mdb) (SERVER=DEDICATED)))
    OK (10 msec)
    ===========================================================
    [oracle@ccsdd-sdap3 admin]$ tnsping ccsdd-sddb3.techteam.com
    TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 12-MAY-2008 10:25:56
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /oracle/app/oracle/product/10.2/network/admin/sqlnet.ora
    Used HOSTNAME adapter to resolve the alias
    Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=ccsdd-sddb3.techteam.com))(ADDRESS=(PROTOCOL=TCP)(HOST=172.17.180.110)(PORT=1521)))
    OK (10 msec)
    ===========================================================
    [oracle@ccsdd-sdap3 admin]$ tnsping 172.X.X.X
    TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 12-MAY-2008 10:21:49
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /oracle/app/oracle/product/10.2/network/admin/sqlnet.ora
    Used HOSTNAME adapter to resolve the alias
    Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.17.180.110))(ADDRESS=(PROTOCOL=TCP)(HOST=172.17.180.110)(PORT=1521)))
    OK (10 msec)
    ==========================================================
    tnsnames.ora
    [oracle@ccsdd-sdap3 admin]$ more tnsnames.ora
    # tnsnames.ora Network Configuration File: /oracle/app/oracle/product/10.2/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    mdb =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.X.X.X)(PORT = 1521))
    (CONNECT_DATA =
    (SID = mdb)
    (SERVER=DEDICATED)
    ===========================================================
    sqlnet.ora
    [oracle@ccsdd-sdap3 admin]$ more sqlnet.ora
    # sqlnet.ora Network Configuration File: /oracle/app/oracle/product/10.2/network/admin/sqlnet.ora
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (TNSNAMES,ONAMES,HOSTNAME)
    ==========================================================
    Yes these are the reults and the files. I think this will help us to determine the problem.
    Thanks
    Shiva

  • Oracle client Download for 9208 windows

    Hi .
    Kindly help me with link to download oracle client for 9208 version for Windows 2000 32 bit.
    Regards
    Vijay

    Refer readme for patch 4547809 on MOS.
    Section "12 Patch Set Components " - table entry "Oracle Client required support files " confirms that this patch can be applied on 9.2.0.x client installation.
    There is no sentence indicating the same in 9.2.0.8 readme (which is there in any 10.2.0.x readme).
    <quote>
    You can apply the Oracle Database release 10.2.0.4 patch set to the following Oracle Database 10g release 2 installations
    Oracle Database Client
    <quote>

  • Anyone know where I can download the 10g Oracle Client?

    My LAN copy of the 10g Oracle Client was deleted a while ago. I've not needed it for a long time but now I've need for it. I see that you can't download it from Oracle any longer or if you can, I don't see where to get it off of OTN. Anyone know where I can download 10g R2 client?

    JSebastian wrote:
    My LAN copy of the 10g Oracle Client was deleted a while ago. I've not needed it for a long time but now I've need for it. I see that you can't download it from Oracle any longer or if you can, I don't see where to get it off of OTN. Anyone know where I can download 10g R2 client?Unfortunately, 10g as Sb has mentioned , is now no longer available for download. So your only way out would be to go via Support.
    Aman....

  • Where can I download the Oracle 10g R2 clients for Windows 7?

    Where can I download the Oracle 10g R2 clients for Windows 7?

    Welcome to the forums !
    Pl identify exact versions of "10gR2" and Windows 7. The only certified combination is 10.2.0.5 on Win 7 Professional or higher. Home version of Windows is not supported. Using uncertifed combinations will result in the software not working as advertised.
    See http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA (see Step 4 - the 10.2.0.5 patch can only be downloaded by paying support customers at https://support.oracle.com)
    HTH
    Srini

Maybe you are looking for

  • Overheads not calculated in CK11N cost estimation

    Hi all, I have two issues 1. When i am executing CK11N,i am not able to get the overhead calculation in itemization,but its showing some ridiculess firgure in cost component structure.I am using dependency D020. 2 . when i am using  dependency D050 t

  • Display problem on macbook pro

    Hi, I am new user to macbook pro and just purchased macbook pro here in Qatar. Within first week of purchase, the display had a problem. While working it just got corrupt and everything froze. I was not able see anything and need to switch it off. Wh

  • How to migrate dimension member text files from ODI to Hyperion Planning

    Hi We are having an issue with ODI that it was not connecting to planning. Later with some instructions from oracle, we have tried to set some RMI path in websphere and we tested the RMI connectivity test. It was successfully connecting to planning.

  • Did my hard drive disappear?

    so my powerbook decided to freeze, i restarted it and it showed a grey screen with a little folder with the mac icon/face thing and a question mark blinking over it, it also shows a blinking globe before that. i tried starting it up with my osx disk

  • SQL Expression in Filter conditon Error in OBIEE 10g

    Hi I am getting an error while giving the sql in the sql expression in filter conditon. The sql expression I am giving is:SELECT MAX("Task Runs"."Start Time") saw_4 FROM "Analysis"' Error: Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P Odbc driver