Download of Oracle database for HP-UX fails
Attempts to download database for HU-UX is failing.
http://technet.oracle.com/software/htdocs/devlic.html?/software/products/oracle9i/htdocs/hpsoft.html
Hi,
You can find the oracle downloads at this site.
http://otn.oracle.com/software/products/oracle9i/content.html
Muppala Anoop Chowdary
Similar Messages
-
Error while adding oracle database resource to the fail safe group
Hi,
we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
During the step, Adding the oracle Database Resource to the fail safe
group , I am getting the error.
28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
I am having one local disk C: one shared disk Z: and quorum disk Q:
Shared disk Z: is already used for SAP<sid> group.
Regards,
JoelJoeldhanaraj wrote:>
> Hi,
>
> we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
>
> During the step, Adding the oracle Database Resource to the fail safe
> group , I am getting the error.
>
> 28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
> 29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
> 30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
> 31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
> 32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
> 33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
> 34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
> 35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
>
> I am having one local disk C: one shared disk Z: and quorum disk Q:
>
> Shared disk Z: is already used for SAP<sid> group.
Hi Joel,
how about following the advice given by the error message and moving the mentioned files/folder (init<sid>_OFS.ora, AUDIT folder) to a clustered resource disk?
just my 2 pence... -
Adding the Oracle Database Resource to the Fail Safe Group
Hi,
I am installtin MSCS cluster for my EP system. After Adding the Oracle Database Resource to the Fail Safe Group my CI jcontrol.exe has been stopped. I tried to connect my SAPSR3DB user by sqlplus but it is giving follwoing error.
SQL> conn SAPEPPDB
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Warning: You are no longer connected to ORACLE.
but DB startup is running properly and DB is coming in open state properly. After that I have perform R3trans -d. following error
C:\>R3trans -d
This is R3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'EPP'"
R3trans finished (0012).
I added Oracle database resource to fail safe group as per installation guide.
Please help me out.
Regards,
Dinesh BhattC:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 11-APR-2010 20:39
:38
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=192.1.20.7)(PORT
=1527))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Produ
ction
Start Date 11-APR-2010 20:39:23
Uptime 0 days 0 hr. 0 min. 14 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File F:\oracle\EPP\102\network\admin\listener.ora
Listener Log File F:\oracle\EPP\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.1.20.7)(PORT=1527)))
The listener supports no services
The command completed successfully
listener start but without any instance.
listerer.ora file
This file is written by Oracle Services For MSCS
on Sun Apr 11 10:53:11 2010
LISTENER =
(ADDRESS_LIST=
(ADDRESS=
(COMMUNITY=SAP.WORLD)
(PROTOCOL=TCP)
(HOST=192.1.20.7)
(PORT=1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
ADMIN_RESTRICTIONS_LISTENER = on
Fsloracleepp =
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=IPC)
(KEY=EPP)
(ADDRESS=
(PROTOCOL=IPC)
(KEY=EPP.WORLD)
(ADDRESS=
(COMMUNITY=SAP.WORLD)
(PROTOCOL=TCP)
(Host=192.1.20.43)
(Port=1527)
SID_LIST_Fsloracleepp =
(SID_LIST=
(SID_DESC=
(SID_NAME=EPP)
(ORACLE_HOME=F:\oracle\EPP\102)
STARTUP_WAIT_TIME_Fsloracleepp = 0
ADMIN_RESTRICTIONS_Fsloracleepp = on
TRACE_LEVEL_Fsloracleepp = OFF
CONNECT_TIMEOUT_Fsloracleepp = 10
dbms_sid added
please help.
Dinesh Bhatt -
Is there any oracle database for windows 7 64 bit
hi,
can any one tell me that is there any oracle database for windows 7 Home Basic 64 bit ( version 6.1).
I have downloaded several versions oracle databases but none have worked.
ThanksHi;
The answer is No as mention before. Please use certified platform which is mention in installation guide:
Operating System Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows Server 2003 - all editions
Windows Server 2003 R2 - all editions
Windows XP Professional
Windows Vista - Business, Enterprise, and Ultimate editions
Windows Server 2008 - Standard, Enterprise, Datacenter, Web, and Foundation editions. The Server Core option is not supported.
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support.
Windows 7 - Professional, Enterprise, and Ultimate editions
Windows Multilingual User Interface Pack is supported.
Check:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#CHDHGGFE
Regard
Helios -
Personal Oracle Database for Linux
May I obtain a free Oracle Database for personal non commercial use? I have tied Personal Edition for MS Windows but I wish to migrate to Linux. I was not able to find appropriate download.
Thanks.The enterprise edition download CD will give you the option of installing the personal edition as one of the install options.
-
CAN ANYONE TELL ME FROM WHERE I CAN DOWNLOAD 10g ORACLE DATABASE...
hi all,
CAN ANYONE TELL ME FROM WHERE I CAN DOWNLOAD 10g ORACLE DATABASE ??
is it possible from oracle website..
thnxssssHi
You can get database 10g from
http://www.oracle.com/technology/software/products/database/index.html
Read terms and conditions before use -
Can i add a servlet in oracle database for webservices without java and how?
HI
can i add a servlet in oracle database for webservices without java and how?
Please help
ThanksDear Frank,
I have done as follows
created a form with a button, and in my button pressed event I wrote
WEB.SHOW_DOCUMENT('javascript:openMyURL("http://192.168.1.34/HELP/ADMF0005.html");', '_Self');
and in my formsweb.cfg I have the following
HTMLbeforeForm=<script> function OpenMyURL(page){window.open(page,"myURL","width=700,width=400,top=0,left=0,toolbar=no,menubar=no"); } </script>
When I click on the button it is coming with toolbar , etc as well as no page found is coming with the following in the address bar.
javascript:openMyURL("http://192.168.1.34/HELP/ADMF0005.html");
My html view source comes as below for the form
<HEAD><TITLE>Oracle9iAS Forms Services</TITLE></HEAD>
<BODY >
<script> function OpenMyURL(page){window.open(page,"myURL","width=700,width=400,top=0,left=0,toolbar=no,menubar=no"); } </script>
<!-- Forms applet definition (start) -->
<OBJECT classid="clsid:CAFECAFE-0013-0001-0009-ABCDEFABCDEF"
codebase="/forms90/jinitiator/jinit.exe#Version=1,3,1,9"
WIDTH="1000"
HEIGHT="660"
HSPACE="0"
VSPACE="0">
<PARAM NAME="TYPE" VALUE="application/x-jinit-applet;version=1.3.1.9">
<PARAM NAME="CODEBASE" VALUE="/forms90/java">
<PARAM NAME="CODE" VALUE="oracle.forms.engine.Main" >
I am using Forms [32 Bit] Version 9.0.2.7.0 -
Possible to use ServiceCenter's Oracle database for Content Management?
Hi,
I have a quick question, and I would really appreciate if any of you have a quick answer for me.
My company is sourcing for a Content Management option as a complement to the object information that can be stored in ServiceCenter's CMDB. We are working towards a complete information storage solution, where the CMDB is the obvious master for all object information.
Our ServiceCenter/CMDB solution is run on an Oracle database. We have an interest in possibly using an Oracle Content Management solution on top of the existing Oracle database.
A question was raised if the Content Management solution can use ServiceCenter's Oracle database for storing documents, ie act as a Content Management database?
The documents need to be fully searchable from Oracle's Content Management product. The solution should support storage of a large amount of data and documents and be scalable. It is critical that this in no way lower ServiceCenter's performance.
Please bear in mind that I'm not a technician, but involved in the portal/Content Management aspect of the project. I'm also responsible for the user environment of our ServiceCenter-implementation.
Best regards
Leila Blomqvist
EDB Business Partner Sweden ABHi Harsha,
Are you going to use the same ERP server for Content server as well? Are you planning to store the documents of this ECC system to the content server only?
If yes, what is the use of that, Anyways all the documents will be stored on this server only for this ECC system. Please go through the link given by Mr Saxena above, that will give you a clear picture of how the content server works.
You can install content server with Max DB although you already have oracle installed on your linux server.
I would suggest you to check the stuff about content server and get your concepts cleared up before going ahead. if you are not clear, you may end up crashing your existing ERP system as well.
AC -
Download of Oracle Database Express Edition 11g Release 2 for Windows
Is there a version of Oracle Database Express Edition 11g Release 2 for Windows x64? Thanks.
JaffeeXE 11.2 Windows 64
HTH
Srini -
How to Install Oracle Database for practice on Laptop?
Hi All,
I am planning to install the Oracle Database and some oracle developer products for practice on my Laptop.
# Laptop configuration
> Lenovo IdeaPad Y450 - 41896AU
> Intel® Core™ 2 Duo T6600 ( 2.20GHz )
> 4GB RAM, 320GB Hard disk
> Windows 7 Home Premium 64-bit
I seeks some help on the doubts regarding this.
Which version of oracle database will suite/work fine for this laptop configuration and path to download the same?
Any additional information regarding this installation.regards,
Shyam.Suryawanshi wrote:
Hi All,
I am planning to install the Oracle Database and some oracle developer products for practice on my Laptop.
# Laptop configuration
Lenovo IdeaPad Y450 - 41896AU
Intel® Core™ 2 Duo T6600 ( 2.20GHz )
4GB RAM, 320GB Hard disk
Windows 7 Home Premium 64-bitI seeks some help on the doubts regarding this.
Which version of oracle database will suite/work fine for this laptop configuration and path to download the same?
Any additional information regarding this installation.regards,
Shyam.As pointed out, Oracle has not certified anything for Windows 7, and will not certify anything for any "home" edition.
I'd recommend you get a copy of VMPlayer (free, from VMware) and create a couple of virtual machines running Oracle Enterprise Linux (free, from Oracle), then install your Oracle db on the virtual machines. -
Download problems Oracle Database 10g Express Edition
Completed download.
Attempted to start application but cannot find the server.
Removed the software using add/remove programs.
Attempted to reinstall but it seems that some applications are still on my system.
Attempted to remove the application but the add/remove program does not recognized the application
What can I do.Hello,
I need to install "Oracle database 10g Express Edition" with different database name example dev but it is taking
default name that is XE and there is no option come during installation where i can put the name of database as per my desire.First, note that you can't install more than one instance of XE per server. Changing the instance name won't help you with that.
As you've already found out, the installer always creates a database instance with default names. That's part of the "Express" concept: As little configuration as necessary to get a Oracle Database installed with just a few clicks. The second advantage is, that you can also simplify the documentation, as you can forget about several aspects when you don't have to configure them...
Since you don't have tools like dbca in XE, your only option would be to rename the database once it's created. There are a few threads on that topic in this forum, e. g. {thread:id=403056}.
But before you start working on that, could you explain why exactly you have to use a different database/instance name?
And also explain why we use "Oracle database 10g Express Edition" instead of Oracle database 10g. what is the meaning of Express Edition.Why and how should we answer why you picked a certain edition? The most likely cause is license costs: XE is available for free, all others are just free as long as you use the OTN license...
For an overview, there is a [url http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html]Comparison Matrix for Oracle Database Editions.
I'd furthermore ask why you still use 10g XE instead of the current 11g XE?
-Udo -
Missing Downloads of Oracle Database 10g Release 1
Does anyone know how to download Oracle Database 10g Release 1 for Non Mac OSX operating systems?
It seem to have disappeared from the download page , only the Mac OSX version remains.
http://www.oracle.com/technology/software/products/database/index.html
I can still download a full range or oracle 9i software for all the different OS's.
Any ideas??
Thanks
Matt11g is now on its way, all platforms (except MacOS) support 10gR2, that may be the reason, why Oracle no longer offers 10gR1 for downloading.
Werner -
Oracle Database Cache Config Agent Fails @ 16%
The cache configuration assitant fails at 16% when trying to configure the cache. Says the control files can't be found. All that is defined in the initSID.ora for the origin database.
What now ?Hi,
I'm having the same error being discussed here: I've installed Oracle client 32bit (installation type Administrator) but when I try to configure EPMA I'm getting the "The oracle data access client is not installed" error message. I've installed 32bit version because the EPM 11.1.2.2 installation guide states "Strategic Finance and FDM both require that a 32-bit Oracle Database client be installed"
I've also tried to uninstall and reinstall the database client, this time using the custom option and I've selected ALL the available components (including Oracle Data Provider for .NET) but still I keep getting the same error message.
I did other EPM installations with the same configuration and never had this kind of problem. What else can I check?
Thank you -
Hi.
Does anyone know where an Oracle database download can be found for a HP-UX machine?
nullHi,
You can find the oracle downloads at this site.
http://otn.oracle.com/software/products/oracle9i/content.html
Muppala Anoop Chowdary -
10g R2 64-bit Oracle Database for MS Windows server 2003
we are upgrading our 10.2.03 32 bit Oracle Enterprise DB on 32 bit MS windows server 2003 to 10.2.0.3 64 bit Oracle Enterprise DB 64 bit MS windows server 2003
I got this Metalink ID
Doc ID: 403522.1 How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows
I have searched for 10g R2 64 bit Oracle databases versions on MS windows server 2003 but din't gent any
I am not sure whether this database works for 64 bit MS windows server 2003
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winx64soft.html
please let me know from where I can download 64-Bit 10g R2 Oracle Enterprise DB for 64-bit MS windows server 2003
Have posted in
English » Technology Network Community » Downloads section haven't seen any replies
thought of posting here
Thanks in AdvanceIf you are running the x64 version of Windows 2003 and not the Itanium version, you will find 10.2.0.1 here:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winx64soft.html
You may then patch it to 10.2.0.3 by downloading the patch from Metalink.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Maybe you are looking for
-
My Apple TV is not responding anymore and white light flickers
My Apple TV does not respond anymore and white light flickers all the Time. No connection anymore.
-
Unable to compile the JAXB generated java files
Hi I am using JAXB 2.0 API for binding process. I have products.xml file as <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE PRODUCTDATA SYSTEM "products.dtd"> <PRODUCTDATA> <PRODUCT PRODID="P001" CATEGORY="Books"> <PRODUCTNAME>Gone with the wind</PR
-
Out-of-memory errors - how to debug/fix
I've only recently noted that many of the tests we were running on our Windows XP oracle 10g server were failing from lack of memory. I have performed a lot of tests, added the /3GB parameter to boot.ini, tried many values for pga_aggregate_target ,
-
About Oracle Reports very urgent
can you pls explain me about what isOracle reportcaching,interactivereports and batched reports.
-
How do I submit a Report link with a URL for one of the values
Hi -- I have a Report link on a column, and I want to set an item to one of the report columns which contains URL values (like "http://...."). If I do that, the URL ends up in the hyperlink and is not escaped, so the colon confuses things. How do I g