Download off click game (CSI Miami) only shows jpg file

I recently purchased and downloaded CSI Miami for my iPod Classic. Didn't load to iPod and said that it couldn't be found. So I repurchased the file (for $4.99 not so much) assuming that there was a problem with me.
Second download was the same. I have Windows and iTunes (most current). The file is located in user/music/itunes music/ipod games... there is only a jpg in the file.
Hard to get anyone to answer. Any ideas?

Oops, my bad. There is, indeed, a CSI Miami click-wheel game.
Report a problem to iTS support. While you're at it, ask for a refund of the 2nd download
http://www.apple.com/support/itunes/contact.html

Similar Messages

I need help finding photos just downloaded to Lightroom...they only show up in "previous downloads" and not in a folder in my pictures

I need help finding phots just downloaded to lightroom...they only show up in "prevoious downloads" and not in a folder in my pictures. what can I do to correct this?

Also, please be aware that Lightroom is not a file browser like your operating system Finder or Explorer is. If the photos are not in the folder you expected them to be in, it is because you (accidentally) imported them into a different folder.

TS1702 Downloaded Air Supremacy game app and only get company logo or black screen before iPad returns to home screen. Checked iPad and app up to date, no better. Any suggestions?

Downloaded Air Supremacy game app and only get company logo or a black screen before the app closes and goes back to my home screen. Checked that iPad and game are latest versions of software and restarted the iPad still with no luck. Any suggestions.

Have you tried a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How can I force that in af inputFile,File Upload popup only show image file

Hi
jdev 11.1.1.5
Is there any way to force that when click the browse button in af:inputFile ,In InputFile popup only show folder and image type file?
Thanks

There is no filter feature available for fileUpload. You can't force the component to only show specific files.
Timo

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates

I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files.   What am I missing here?

I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files when both are present on the SD card. JPGs are used for quick proofing on an iPad.    DNG RAW files are edited on a Mac Pro (2013).    Other than deleting the JPGs before importing images from the SD card, is there any way to force Photo to select and import only the DNG images?

Thanks Larry,
I did see the J stacked in the lower left of the thumbnails but couldn't figure out how to get to whatever is below it.   How do you select R?
I use an iPad to do quick proofs of my images.   A JPG is good enough for a proof ( dust on the lens, composition, blown out image, etc. ).   The iPad is JPG friendly and can load the images quickly.    Serious editing takes place on my Mac Pro with the DNG files.   I use the same workflow with the the Leica M 240.   iPhoto has been a quick and easy importer to the Mac capturing all of the metadata in the EXIF sidecar file ( location, date, time, camera settings, lens type). A quick scan in iPhoto for the "keepers" let's me export those worth editing to Lightroom/Bridge/Photoshop. I typically shoot 50 images from three locations in a normal day. If I'm lucky I'll get 1 worth real work to add to the portfolio.

HT4106 Movies only show with file extension or duration in Photo app

This is really a two part question:
1. Is there a way to get the Photo app to show the file name?
2. Is there a way to get the movie files on my SD card to show in the Video app?

I face the same issue. This isn't a solution, hopefully someone can help with an app. The photos app sorts by file date, not alphabetically. So, on a computer, if you sort those files by date and make a list, you could then use that list to have a better chance of importing the right movie when you want to watch it.
I have kind of the same situation as you. A couple of large SD cards with video files on them that I don't have room to keep on the iPad. What I ended up doing was I found a program that allowed me to edit the creation date and time for the file, and once all those were the same, the ipad then defaulted to alphabetical and I could then have a list and count down, find the 5th file, import it and have it be what I wanted.
So not the solution you're looking for, here's hoping someone has one for you, but a different work around if things don't pan out. I also be interested in an app that allowed me to see the file names.

Deskjet 3050 does only print JPG files in color - all other docs are only printed in black and white

Dear All,
I have a problem with my Deskjet 3050 Printer. (USB connected with my laptop).
My printer won't print colored documents in color but only in black and white (except for JPG files (photos) which are printed in color.
Word documents or PDF files (for example) are always printed in black and white - even if these are in color.
Copying colored pages with my printer is no problem.
This works perfectly well. The printer is connected to my PC via USB.
The cartridges (color and black and white) are practically new and original HP cartridges.
Could the problem be related to the printer settings which I might have changed by accident.
Thanks in advance for your advise.
Cheticamp
This question was solved.
View Solution.

Hi Cheticamp,
From the control panrl go to Devices and Printers.
Right click the printer and select Printing Preferences.
Cluck the Advanced button and ensure that Print in Grayscale is set as off and confirm.
From Word click on File > Print and click on Settings.
You will see the dame printing preferences screen.
Press Advanced and ensure the grayscale optio is set as off for Word as well.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Firefox doesn't show jpg files from a web page while other browsers do

I have created a page and uploaded www.nutechequipments.com/equipment.html page doesn't show the jpg files in only firefox everywhere including Dubai. But all the other browsers show the uploaded jpg pictures in perfect manner. In Firefox only the table is loaded with placeholders. It is not a problem with my computer. It is the problem all over the world.
the sample html code is given below:
<pre><nowiki><td><img src="equip\equip.jpg" size width="110" height="90"></td><td><img src="equip\equip1.jpg" size width="110" height="90"></td><td><img src="equip\equip (2).jpg" size width="110" height="90"></td><td><img src="equip\equip (3).jpg" size width="110" height="90"></td></nowiki></pre>

You have backslashes (\: escaped as %5C as seen in Tools > Page Info > Media) in the scr attribute of the images and that doesn't work in Firefox.
You need to change the backslashes to forward slashes
<pre><nowiki>equip%5Cequip.jpg
equip%5Cequip1.jpg
equip%5Cequip%20(2).jpg
equip%5Cequip%20(3).jpg
equip%5Cequip%20(4).jpg
equip%5Cequip%20(5).jpg
equip%5Cequip%20(6).jpg
equip%5Cequip%20(7).jpg
equip%5Cequip%20(8).jpg
equip%5Cequip%20(9).jpg
equip%5Cequip%20(10).jpg
equip%5Cequip%20(11).jpg
equip%5Cequip%20(12).jpg
equip%5Cequip%20(13).jpg
equip%5Cequip%20(14).jpg
equip%5Cequip%20(15).jpg
equip%5Cequip%20(16).jpg
equip%5Cequip%20(17).jpg
equip%5Cequip%20(18).jpg
equip%5Cequip%20(19).jpg
equip%5Cequip%20(20).jpg
equip%5Cequip%20(21).jpg
equip%5Cequip%20(22).jpg
equip%5Cequip%20(23).jpg
equip%5Cequip%20(24).jpg
equip%5Cequip%20(25).jpg
equip%5Cequip%20(26).jpg
equip%5Cequip%20(27).jpg
equip%5Cequip%20(28).jpg
equip%5Cequip%20(29).jpg
equip%5Cequip%20(30).jpg
equip%5Cequip%20(31).jpg</nowiki></pre>

Preview doesn't show JPG files

I keep having problems viewing JPG files in Preview. The image displays in the Finder, it displays in the thumbnail view for 'Downloads" and it will even appear in the sidebar for Preview if I choose to show the sidebar, but it does not appear in the Preview main window.
I tried deleting the com.apple.Preview.plist file as recommended in an old thread, but it didn't help.
ideas?

Hi tomswie76, i found your solution absolutely working.
Just turn on milimeters in preview module and prev
iew is on again. This works on all of my catalogues.
Thanks.
Karel

Just upgraded to 60d and lr 3.5. Import not showing jpg files in folder and showing as raw+jpg

the jpg and raw used to show side by side in catalog and in import dialoge now they are "stacked" together, I cannot seem the jpg in the import dialog at all, even though they are there in windows explorer.
they show as raw+jpg after import. how do I make them show as separate files???
I'd like to see the side by side with the new camera

Edit/Preferences/ Import Options / Treat JPG Files next to raw files as separate photos has to be checkmarked.
Frans

Right click in data modeler only shows "properties" choice

Hi:
I've been playing with the data modeler for an existing schema and I am unable to follow the directions in most of the tutorials because supposedly right-clicking on a table in the diagram or on within the data modeler browser is supposed to bring up a menu but when I right click I just see "properties". Is this a permission thing? I've made a relational diagram by dragging the objects from the connections view onto a diagram and I see them all.
In particular, I was trying to create a subview in the browser but right-clicking on subviews[] gives me nothing. The most choices I get at any level are "Show" "Hide" "Properties".
SQL Developer 2.1.1.64, Oracle 10gR2.
Thanks.

Hi Philip:
I was trying to import the data dictionary for my current schemas. I thought I was actually able to do this about a year ago with an earlier version. Do I need the download for that? I can see the complete relational model by dragging and dropping the tables/views into the diagram. But most of the data modeler example start with "File->import->Data Dictionary and I never see those submenus.
Thanks

Downloading latest update but now phone only shows charge cable and itunes symbol. Says I must reset to factory settings. Will I lose my data, pics, notes etc!

Downloaded latest update version it finished but then said verifying. Had to unplug and now it shows charge symbol and itunes logo and that i must reset to factory settings. I can not do any anything else with phone. Will I lose my notes, pics, data etc? Or can an Apple store fix?

It's in recovery mode. If it wasn't backed up before you started, the information is already gone. There is nothing left on the phone at this point.

MY iTunes isn't allowing me to download my already bought songs, it only shows my old playlist that I've deleted.. HELP PLEASE!?

If anyone knows whats going on or how to help I'll apprecite it!!!

If changing your password does not solve, then contact itunes support

Only showing appropriate files to user that is logged in

On a monthly basis we have our accounting company upload
(ftp) financial statements to our server. Now each file has a the
user name in the file name. So we need to be able to show
only these statements to the appropriate user. I know that
there has to be a way to approach this.
Any insight would be appreciated.

I got this working ... but now I need to filter the files
based on the user who is currently logged in. The naming convention
is as such:
UserID-YYYMMDD-ReportName.pdf.
I have the username saved into the session as
Session.UserName. Is there a way to filter and look for the
username in the file name?
Thanks

Download off click game (CSI Miami) only shows jpg file

Similar Messages

Maybe you are looking for