Download patch from SAP OSS.

Hello everybody,
I had installed the Solution Manage.
Now I want to download the patches from SAP Protal.
So is it SAP router is required?
which RFC is required for the same and what settings are required?
beacuse their is two RFC SAPOSS and SAP-OSS then which RFC is used when connect to SAP OSS.
I have configure the Maintenance Optimizer but unable to download the Patches.
I have also install the Download manager.
Please suggest me.
How to process so that I can able to donwload the Patch.
Thanks
Ganesj

Hi,
Try FM's from the Function Group GRAP.
Especially the FM's
GRAPH_RECEIVE.
Hope this helps...
Lokesh
Pls. reward appropriate points

Similar Messages

How to provide a button in bsp that downloads data from SAP into powerpoint

hi,
how to provide a button in bsp that downloads data from SAP into powerpoint
this absurd requirement is needed by my client.
thanks
saad

Hi,
Look at tools like the things mentioned above or things like
http://www.investintech.com/products/developer/creatorsdk/creatorsdkmain/
http://command-line-image-converter.qarchive.org/
You need to look for tools that can run via the command line and thsu be executed as external command (http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971d4543b11d1898e0000e8322d00/frameset.htm)
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

Upload and download tables from sap

hi!
i need to download tables from sap 46c in order to upload them again in anther sap system.
is it possible lie doing with programs?
regards
yifat

hi, about download table content, you can using this one, RFC_READ_TABLE.
It's a RFC FM, so you can call it from your target SAP system, with a available RFC destination already built.
After call it, do modify TABLE in target system.
By the way, I think if you really need to copy data to onther SAP system, you can try client copy, or transportation.
thanks

Download Graphics from SAP

Hi,
I am bit curious to know, Is there any standard program or process to download Logos (bitmaps) from SAP into local system.
We have logos in our SAP system. So i would like to download them from SAP into local drive.
Thanks,
Subba.

Hi,
Try FM's from the Function Group GRAP.
Especially the FM's
GRAPH_RECEIVE.
Hope this helps...
Lokesh
Pls. reward appropriate points

Download Grphics from SAP

Hi All!
Is ther any program or transaction code which can be used to download the bitmap Graphics present in SAP (SE78)
THanaks in Advance,
Harkamal

hi,
check these threads...
Download Graphics from SAP
Re: SAPscript Graphics : Download
hope this helps,
do reward if it helps,
priya.

Can I install patches from SAP site?

Dear Friends,
I understand that i need some patches are required for my frountend GUI 6.2 for Business Explore and WAD. Somehow the basis support is not good over here.
1) Is there any place, or better way of searching and how to install them on my PC.. I have got my own OSS id, will this be sufficient?
2) Some training software for new Netweavers 2004s BI are available? is this true if so how to download them?
thanks for your time.
regards,
hari

Hi Hari,
Yes. You can download and install the frontend patches. The one thing you need to be careful is that any query you open with the latest patch would not open on any PC with lower patch level.
You can download the patch using your OSS account. The link is:
http://service.sap.com/swdc -> Entry by Application Group -> SAP Netweaver -> ......
Bye
Dinesh

Download Stack from SAP Marketplace to my ECC 6.0 (abap+java)

Hi gurus
I have a doubt about the process of support package (stack) download. I don´t want downloading from maintenance optimizer, I´m doing this process directly from Sap Marketplace, in first step (1 of 3) I have to select the target stack (which is the stack level that I intend to make an update) and the source target (which is the actually stack level of my system)... Ok I choose them with no problem, the situation and my doubt is below that where I have a check list of "Usage Selection" (image). How can I know which one I must choose for my system... I don´t understand what is that, for instance "Strategic Enterprise Mgmt" ; E-"Recruting" or "EP Core"!!!... etc...
So how can I know which of these components I need to check to downloading for my system, how can I know that?
*Image: http://img188.imageshack.us/img188/664/imagem1b.jpg
Help me please!
Best regards,
João Dimas - Portugal

Hi Sunny,
Yes ok, I understand that but... I think I didn´t explain what I want to learn/know or you didn´t understant what I want...
At download windows you see this list:
ERP Central Component (ECC)
XI Content
Strategic Enterprise Mgmt
Self Services
Supplier Relationship Mgmt
Extended E-Commerce Components
Financial Supply Chain Mgmt
cProject Suite
E-Recruiting
Learning Solution
Process Integration (XI)
Workforce Mgmt Core
Business Intelligence
Portal Content
Enterprise Portal
Easy Document Management
EP Core
Mobile Infrastructure
How can I know which of these types I must have choose for my system...? The output of that url doesn´t inform me which of these type I have in my system, it only inform me the master components or in other words which stacks I have in my system (ABAP and JAVA stack´s)!!!
Best regards,
João Dimas - Portugal
Edited by: João Dimas on Jul 2, 2009 2:28 PM

Unable to download patches from analyze result

This morning I tried to download a list of patches returned by smpatch analyze but most of them errored out with the error patch not found. Is there a problem with the patch database server?

i believe this is a side effect of patch 119108-03 look at the patch details. i'm not sure myself how to resolve this issue. and i've got the problem now on 2 Sun v40z and a W2100z. here's the relevant information hopefully someone is watching this list!
[ninesixeight]
[root]
[root-137]:smpatch get
patchpro.backout.directory - ""
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://updateserver.sun.com/solaris/
patchpro.patchset - patchdb
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
patchpro.sun.passwd **** ****
patchpro.sun.user - ""
[ninesixeight]
[root]
[root-138]:smpatch analyze
120132-01 SunOS 5.10_x86: patch e1000g driver
119108-03 SunOS 5.10_x86, Sun Update Connection Client, System Edition 1.0
118993-03 SunOS 5.10_x86: /kernel/misc/scsi patch
119688-01 SunOS 5.10_x86: /usr/lib/inet/in.mpathd patch
120252-01 SunOS 5.10_x86: st & mt patch
118860-01 SunOS 5.10_x86: usbkbm patch
119857-01 SunOS 5.10_x86: pboot hangs on memory check
120102-01 SunOS 5.10_x86: patch usr/lib/libsmedia.so.1
120202-01 X11 6.8.0_x86: Xorg client libraries patch
119118-03 Evolution 1.4.6_x86 patch
119541-02 GNOME 2.6.0_x86: Gnome Dtlogin configuration Patch
119413-04 GNOME 2.6.0_x86: Nautilus libraries Patch
119116-08 Mozilla 1.7_x86 patch
119904-01 Openwindows 3.7.3_x86: Xview Patch
[ninesixeight]
[root]
[root-139]:smpatch update
119108-03 has been validated.
119118-03 has been validated.
119116-08 has been validated.
119904-01 has been validated.
Installing patches from /var/sadm/spool...
WARNING: The installer cannot find the patch.
119108-03 has been applied.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
119118-03 has been applied.
WARNING: The installer cannot find the patch.
WARNING: The installer cannot find the patch.
119116-08 has been applied.
119904-01 has been applied.
/var/sadm/spool/patchpro_dnld_2005.07.26@16:42:17:EDT.txt has been moved to /var/sadm/spool/patchproSequester/patchpro_dnld_2005.07.26@16:42:17:EDT.txt
[ninesixeight]
[root]
[root-140]:smpatch analyze
Failure: Cannot connect to retrieve Database/current.zip: Server returned HTTP response code: 403 for URL: https://getupdates.sun.com/solaris/
[ninesixeight]
[root]
[root-141]:smpatch get
patchpro.backout.directory - ""
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates.sun.com/solaris/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""

Downloaded file from SAP to excel 2007(*.xlsx, *.xlsm) - unable to open

Hi All,
I am downloading a data from SAP to excel(*.xlsx) format. I am able to conver/download the file in *.xlsx format, but if try to open the downloaded excel file, it gives teh error message 'Excel cannot open the file 'filename.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'. with a OK button. When I press the OK button, no data is displayed.
So kindly let me know how to download the file from SAP to *.xlsx format without any errors.
Note: I am able to download the data in *.xls format without any erros.
Thanks in advance,
Regards,
Vijay

Hi,
You are probably not being able to open the file of .XLSX format because you do not have Microsoft Office 2007 installed on your system. You might be having a lower version of Microsoft Office. e.g. 2003.
What you can do is, before opening the .XLSX file directly on a system which does not have Microsoft Office 2007, you can convert it into .XLS format and then open the same.
See the below code.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_COPY
EXPORTING
    SOURCE               = 'C:\Users\Danish\Desktop\test1.xlsx'
    DESTINATION          = 'C:\Users\Danish\Desktop\test2.xls'
EXCEPTIONS
    CNTL_ERROR           = 1
    ERROR_NO_GUI         = 2
    WRONG_PARAMETER      = 3
    DISK_FULL            = 4
    ACCESS_DENIED        = 5
    FILE_NOT_FOUND       = 6
    DESTINATION_EXISTS   = 7
    UNKNOWN_ERROR        = 8
    PATH_NOT_FOUND       = 9
    DISK_WRITE_PROTECT   = 10
    DRIVE_NOT_READY      = 11
    NOT_SUPPORTED_BY_GUI = 12
    OTHERS               = 13.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Danish

S_ALR_87011990 - Problem in downloading report from SAP to Excel.

Hi All,
I am facing an issue in report S_ALR_87011990, while downloading a report from SAP to excel. In SAP, report is comming out to be in different format than what it is getting generated in excel.
I am attaching screen shots for your reference.
Request you all to kindly help me in this regard, As this report is required urgently.
Thanks in advance....
Regards
Rajat Kumar

Hi Priya,
Sorry for the delay.. here
Simple explanation...
ABAP - OLE Automation using MS-Excel - Code Gallery - SCN Wiki
You can find a detail doc here
http://www.heyiamonline.com/abap/pdf/ABAPOLEAUTOMATION.pdf
Regards

Download file from SAP PLM or Content Server?

Hi all,
I learned that the VEG server download the originals from content server and then started the conversion process.
In my case, I have an error below, it is strange that the IP 153.95.192.93:443 is the ip of SAP PLM server, can anyone tell me is my configuraton right?
thanks
Job 42 (Workflow 'KPRO Retrieve') report
Startup Parameters
     FilesPerTask = '5 '(Integer)
     InputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB41 \ KProRetrievalRequest.xml' (String)
     OutputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB41 \ KProRetrievalResponse.xml' (String)
Step 'validate input'
   Completed Action 'enter a valid'
Step 'Download'
   CompletedWithWarnings Action 'can not download all the files'
     Info Message 'document retrieval tasks to be addressed: 1'
     Warning Message 'first task failed to retrieve a file (of 1): Unknown error (warning)'
       jmp_KproRetrieve (Task 39)
       Warning Message 'file' A00021876_20130819.CATProduct 'unable to download: Unable to connect to the remote server: Since the connected party did not properly respond after a period of no response or a host connection, the connection attempt fails. 153.95.192.93:443 '

HI Fergal.
I changed the IIS port to XX443(XX means instance number), the https service is also started in the ECC server.
but I got below errors:
Startup Parameters
     FilesPerTask = '5 '(Integer)
     InputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB115 \ KProRetrievalRequest.xml' (String)
     OutputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB115 \ KProRetrievalResponse.xml' (String)
Step 'validate input'
   Completed Action 'enter a valid'
Step 'Download'
   CompletedWithWarnings Action 'can not download all the files'
     Info Message 'document retrieval tasks to be addressed: 1'
     Warning Message 'first task failed to retrieve a file (of 1): Unknown error (warning)'
       jmp_KproRetrieve (Task 122)
       Warning Message 'file' A00021876_20130819.CATProduct 'unable to download: The underlying connection was closed: Could not establish trust relationship for the SSL / TLS secure channel. : According to the verification process, the remote certificate is invalid. '

Download image from SAP Portal

Hi,
we need to download images stored into a SAP Portal starting from the url of these images.
Ours is a pure-java application.
If i try to access the image's url using a browser, SAP give back a login-form and after authentication, everything works perfectly.
But if i try to access the image's url from a standalone java application using "javax.imageio.ImageIO", i'm not able to download the image.
Using Java API, how can i authenticate, access and download a file starting from its url?
Could anyone give me some examples?
Thanks,
Roberto

hi
You can use UME API and do a force login, but I would recommend to use this only if the user is an authenticated user.
request.setAttribute(ILoginConstants.LOGON_UID_ALIAS, "userID");
UMFactory.getLogonAuthenticator().logon(request,response,"uidpwdlogon");
you can also do a force logon using
UMFactory.getAuthenticator().forceLoggedInUser(request, response);
regards
Jagdeshwar

How to Download documents from SAP Teched site

Hi All,
I have a user id and password. Please let me know the download procedure to download teched sessions from Teched site.
Thanks in Advance.
Kalyani.

hi
once you go to the teched site you can find the option to download the presentations and exercises from tesh ed site.
click on education sessions to get he list of session and demos.
check below link for accessing saptech ed site
http://www.sapteched.com/09/usa/edu_sessions/home.htm
hope this helps
regards
santosh

Download datas from SAP to Excel in OO

Hallo,
i create an excel-document with the methods
CALL METHOD DOCUMENT->CREATE_DOCUMENT
    EXPORTING
      OPEN_INPLACE     = ' '
*      CREATE_VIEW_DATA = CREATE_VIEW_DATA
*      ONSAVE_MACRO     = ONSAVE_MACRO
*      STARTUP_MACRO    = STARTUP_MACRO
      DOCUMENT_TITLE   = DOCUMENT_TITLE
      NO_FLUSH         = NO_FLUSH
    IMPORTING
      ERROR            = ERROR
      RETCODE          = RETCODE.
and
CALL METHOD DOCUMENT->GET_SPREADSHEET_INTERFACE
    EXPORTING
      NO_FLUSH        = NO_FLUSH
    IMPORTING
      SHEET_INTERFACE = SPREADSHEET
      RETCODE         = RETCODE
      ERROR           = ERROR.
and so on.
Wounderful.
I close the excelwindow with the methods:
CALL METHOD DOCUMENT->SAVE_AS
    EXPORTING
*      FILE_NAME   = FILE_NAME
      PROMPT_USER = 'X'
      NO_FLUSH    = NO_FLUSH
    IMPORTING
      ERROR       = ERROR
      RETCODE     = RETCODE.
PERFORM FEHLERPRUEFUNG.
CALL METHOD DOCUMENT->CLOSE_DOCUMENT
    EXPORTING
      DO_SAVE     = DO_SAVE
      NO_FLUSH    = NO_FLUSH
    IMPORTING
      HAS_CHANGED = HAS_CHANGED
      ERROR       = ERROR
      RETCODE     = RETCODE.
PERFORM FEHLERPRUEFUNG.
CALL METHOD DOCUMENT->RELEASE_DOCUMENT
    EXPORTING
      NO_FLUSH = NO_FLUSH
    IMPORTING
      ERROR    = ERROR
      RETCODE = RETCODE.
PERFORM FEHLERPRUEFUNG.
FREE DOCUMENT.
Only the worksheet is closed but not the excel-window.
Has anybody an idea what is wrong?
Thank you.
Greetings
datatom

Hallo,
i create an excel-document with the methods
CALL METHOD DOCUMENT->CREATE_DOCUMENT
    EXPORTING
      OPEN_INPLACE     = ' '
*      CREATE_VIEW_DATA = CREATE_VIEW_DATA
*      ONSAVE_MACRO     = ONSAVE_MACRO
*      STARTUP_MACRO    = STARTUP_MACRO
      DOCUMENT_TITLE   = DOCUMENT_TITLE
      NO_FLUSH         = NO_FLUSH
    IMPORTING
      ERROR            = ERROR
      RETCODE          = RETCODE.
and
CALL METHOD DOCUMENT->GET_SPREADSHEET_INTERFACE
    EXPORTING
      NO_FLUSH        = NO_FLUSH
    IMPORTING
      SHEET_INTERFACE = SPREADSHEET
      RETCODE         = RETCODE
      ERROR           = ERROR.
and so on.
Wounderful.
I close the excelwindow with the methods:
CALL METHOD DOCUMENT->SAVE_AS
    EXPORTING
*      FILE_NAME   = FILE_NAME
      PROMPT_USER = 'X'
      NO_FLUSH    = NO_FLUSH
    IMPORTING
      ERROR       = ERROR
      RETCODE     = RETCODE.
PERFORM FEHLERPRUEFUNG.
CALL METHOD DOCUMENT->CLOSE_DOCUMENT
    EXPORTING
      DO_SAVE     = DO_SAVE
      NO_FLUSH    = NO_FLUSH
    IMPORTING
      HAS_CHANGED = HAS_CHANGED
      ERROR       = ERROR
      RETCODE     = RETCODE.
PERFORM FEHLERPRUEFUNG.
CALL METHOD DOCUMENT->RELEASE_DOCUMENT
    EXPORTING
      NO_FLUSH = NO_FLUSH
    IMPORTING
      ERROR    = ERROR
      RETCODE = RETCODE.
PERFORM FEHLERPRUEFUNG.
FREE DOCUMENT.
Only the worksheet is closed but not the excel-window.
Has anybody an idea what is wrong?
Thank you.
Greetings
datatom

Download from SAP system to Excel sheet

Hi,
I have a list of materials, would like to download it from SAP system to an Excel sheet.
Kindly let me to know the procdure to do it.
Thanks
NDS

Hi,
Please execute T code MM60 or the required T code to get the list of materials and Go to sap menu Bar ->setting->list->save->local to spreedsheet and save it your desk top to create an Excel file.
Regards
Ram

Download patch from SAP OSS.

Similar Messages

Maybe you are looking for