Download problem for my mac

download problem for my mac it keep on say safari is open when its not

Eric Cosby which Adobe software or service are you referring too?  Have you tried utilizing the Activity Monitor to verify that Safari is closed?

Similar Messages

  • Downloaded mavericks for one mac can i use the same download to install on another mac

    I have downloaded for 12 hours initial installation on one mac for mavericks, and all installed successfully. Rather than download again for another mac, can I use the same download and copy on to the other mac..and if yes, where will I find it?

    All you need to do is go to System Preferences > App Store and uncheck the automatic install of updates box, then download the Mavericks installer, and copy to a flash drive.  You will need a flash drive of 8 G B or more since the installer is around 5.3 GB.  The installer will be in Finder > Applications.  You can then copy that flash drive installer to the Applications folders in all the Macs you have that are capable of running Mavericks, http://support.apple.com/kb/HT5842.
    When the installer runs, the last step in the installtion is for the installer to erase itself.  So makng a copy before the installer runs is essential if you want to avoid redownloading.
    Installing from the same installer does not cause problems for Macs on the same network.

  • I would like to download iMessage for my mac book pro.

    I would like to download iMessage for my mac book pro OS X, 10.8.1. When I try to install imessage it says that I need 10.7. What do I have to do to get imessage installed?

    It sounds like you already have iMessages setup. Did you sign into iCloud from system preferences and did you also add your iCloud account to Mail?
    They should, just sign you into iMessages when you load Messages.app.
    If you are only being asked to put in your AIM id (which it is really asking for your APPLE ID) then it means that you are already signed into iMessages (hopefully)
    To check this, go to Messages>Preferences>accounts and choose iMessages. Make sure that it says it is enabled.
    Now close out of the preferences, and then hit cmd 0, to bring up the Chat Box.
    The Chat box lets you use iMessages begin a conversation with a friend in your contacts.
    simply type their name into the TO field at the top of the chat box and find a contact with "IMessages" next to their name. Hover over that contact, and if a blue Talk Bubble comes up next to the name, that account is ready to receive iMessages.
    Click the account and begin a conversation.
    If you have setup everything correctly with your Apple ID on your iDevices as well as in Messages on OSX, you should be able to have a synced conversation with all of them.
    Please note, if you were using your Apple ID with iChat before ML, then you most certainly have an AIM account and you were using it in the past. If you want a buddy list, then you should follow the prompt to sign in with your AIM account, but treat it like it is asking you for an Apple ID. Sign in with your apple id to the aim account it asks you to sign into and then you'll have your old iChat buddy list back.
    iMessages does not have a buddy list associated with it. you need to organize your Contacts with their user information and then you need to use the To field in the chat box to communicate and find people with iMessages. Only gtalk, jabber, aim, bonjour, yahoo have the ability to show you a buddy list. iMessages buddy list is Contacts.app
    if iMessages is not enabled, you can enable it by clicking on the iMessages account in Messages>preferences>accounts and then signing in with the same apple id you have tied to your iOS devices.
    I hope this helps.

  • How can i download applications for my mac

    How can i download applications for my mac for free

    At the App Store you can download any file that is available for free. Then there are other sites such as MacUpdate.com where you can also find free files to download.

  • Where can i download java for my mac os x, where can i download java for my mac os x

    where can i download java for my mac os x, where can i download java for my mac os x?

    Type java in google and go to Oracles website to download it.

  • I want to ask how I download Firefox for a Mac

    I have just bought an Apple Mac Workbook and I don't want to use Safari. I want to use Firefox. Is there a specific website where I can go to download Firefox for a Mac?

    You can find the latest Firefox release (currently 6.0.2) for all platforms here:
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html

  • Trying to download lion for my mac, i get as far as show billing info and nothing happens, what can i do??

    trying to download lion for my mac, i get as far as show billing info and nothing happens, what can i do??

    Capetowncrooner I would recommend utilizing a different web browser or beginning the installation process within the Creative Cloud Desktop application.  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Download file for Palm/Mac reader is damaged

    First of all, on the download page for the Reader for Palm OS Mac (http://www.adobe.com/products/acrobat/readstep2_mobile.html#palmMac), it says the file is 8.7 MB, but when the file is downloading, it says 9.4 MB, which turns out to be the actual size of the downloaded file.
    Then, when I try to mount the DMG file, I get a warning that "The disk image you are opening may be damaged and could damage your system. Are you sure you want to open this disk image?" Could this be related to the disparity between stated and actual sizes of the file?
    I tried downloading it several times with the same result. After a little research, I found an article on Apple's website discussing options for dealing with this particular message (http://docs.info.apple.com/article.html?artnum=305111-en).
    Mainly, it suggested converting the disk image to read/write, mounting it, and then attempting to repair it with Disk Utility. I tried this, but Disk Utility was unable to repair the mounted image. Disk Utility does report that the volume needs repair ("Volume Header needs minor repair), but on both verification and repair, it reports a "failure on exit" and fails to complete either task.
    Anyone else out there have this problem, or even better, a solution?
    All that said, and because I really do want to be able to read PDF files on my TT3, I went ahead and just copied the files off of the mounted disk image and got rid of the image.
    The Mac desktop application that converts untagged PDF files and then transfers tagged PDF files to the Palm device seems to work just fine, and even attempt to optimize preference settings automatically by querying your device during a hot sync for display depth and screen size. The Palm OS app seems to work quite well, too.
    Between them, I transferred a fairly difficult document containing lots of graphs and charts, special mathematical and chemical symbols, and even equations. And it worked VERY well, although the equations were a little difficult to read on my TT3 sometimes.
    The graphs and other figures in the document were all quite readable, even though I had preferences on the desktop app set to "shrink images to screen width." It got my TT3's screen dimensions at 320x320, and there was no way I could find to get the system to take advantage of the TT3's extended screen size of 320 x 480. (if anyone has any ideas about that, I'd like to know -- I'm thinking of converting PDF to some other graphics format (using Graphic Converter's batch converter) and using a viewer for that format that can use the landscape mode to display a scrolling page display that's 480 pixels wide).
    A PIECE OF MY MIND TO ADOBE:
    After initially posting this, I noticed that this same problem is mentioned in an archived topic that began on May 16, 2007 and ended on August 14, 2007, so it has apparently been a problem for more than a year. However, after noting that the archived topics are "read only," I decided to go ahead and post this to keep the issue active in the hopes that someone at Adobe who might have a smidgen of concern for the users of their products might take care of it.
    Adobe OWES it to its users (and its own reputation as a quality-conscious company) to correct this problem. A significant percentage of the users of the Adobe Reader are not as knowledgeable about the risks they would be taking with disregarding the warning and mounting the image anyway, or as sure of their ability to repair any system damage and recover any lost data, should damage occur. I've been using and fixing Macs since 1984, and the message scared ME a little, until I was able to find a little information about it. Could Adobe's fix be something as simple as generating and posting a new DMG file, that's NOT damaged?

    I also recently tried to download Adobe Reader to my Macintosh to use on my Palm TX and got the message "The disk image you are opening may be damaged and could damage your system." This is extremely frustrating, and disappointing that the Adobe people don't seem concerned enough to fix the problem. I am not a techie, so I dare not continue.
    If anybody has a solution and could explain it slowly to somebody who doesn't understand the computer world very well, I would be grateful.
    Thanks,
    Andrew

  • Spotify is a problem for the Mac OSX update Yosemite 10.10

    Hello,
    When i downloaded the new update for the Mac: OSX Yosemite 10.10 - my macbook could'nt be shut down anymore.
    I've called the Apple helpdesk and we both tried to figure out what was causing this problem. After some tests it seemed that Spotify was the problem of all this. (Something that is called Spotify manager? was failing with the start up of my Mac). 
    So i hope this problem can be fixed, because i had to delete Spotify for that my Macbook could work normally again.
    And it's ashame, because i can't use Spotify anymore now.
    I hope that this will be fixed, so i can enjoy music again.
     

    Same here, tried to install first time on 10.10.4, gets a black screen and can't quit app. Looks like this app is not compatible with OSX 10.10 That's awesome, how do you expect Mac users to stick with your company when there is an alternative for the same price. Even more so when your app does not even run properly on OSX updates. Get it fixed, fast or I'm leaving. I'm a premium user, not a freebee. 

  • Need help downloading xcode for my mac operating system...

    I want to download the correct XCODE version for my Mac os x Mountain Lion - 10.8.5
    So please can somone tell me the best stable release of XCODE.
    DO NOT STATE ANY VERSIONS FOR SNOW LEOPARD AS I DONT USE THAT VERSION OF MAC.
    I AM RUNNING MOUNTAIN LION. - NOT TIGER OR SNOW LEOPARD NOR MARVICK.......
    I am using macbook pro. Its retina display and its got i7 processor with 3.78GHZ turbo speed, 24GB ram clocked at 2GHz
    2GB of video card nvidia.
    Thanks in advance.
    Raghav.

    Hey thanks for your replies.
    I installed this xcode 5 last time and when i tried to launch from the mac os x application dock, it launched a white box and closed automatically. Does anyone know why?
    Sometimes when i try to launch the IDE it comes up and says error loading please redownload the .dmg file.

  • I want to download Firefox for my Mac Powerbook G4, os X, older version please.

    Firefox no longer works or opens on my desktop computer

    Firefox 3.6 is the last version of Firefox from Mozilla for PPC Mac's. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    For older Macs that aren't supported in Firefox 4 / 5 / 6, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/
    http://code.google.com/p/tenfourfox/downloads/list

  • How to download firefox for my Mac

    Need help with download of firefox and google chrome for my Mac.

    https://www.google.com/intl/en-GB/chrome/browser/mobile/
    https://support.mozilla.org/en-US/products/firefox

  • I need download Safari for my MAC. From I changed the software to Macvery I can not use Safari.

    How do I  download SAFARI to my MAC.

    When you purchase iTunes content, the balance from your gift card will be deducted automatically.
    You can check the balance of a redeemed card here > Account Home - Apple Store

  • Download Problems for windows 8 64 bit laptop

    Why does Apple make it almost impossible to download iTunes for Windows 8 64 bit laptop? Is there a link that works?

    Hi there James,
    You can download iTunes from one of a couple places. Here is the first place:
    Apple - iTunes - Download iTunes Now
    If for some reason that is not downloading the correct version, you can download the file for Windows 8 64 bit here:
    iTunes 12.0.1 for Windows (64-bit)
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have had problems with inappropriate pop-ups after i downloaded utorrent for my mac and i can't get it to stop

    I chose to download torrent the other day and whenever i am on a unsecured website i get these inappropriate pop-ups and i can't click certain links, it redirects me to my top sites and opens a new window to mackeeperapp2.zeobit.com

    You probably installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for

  • NWBC v3.0 installed, but "nothing happens" upon executing desktop shortcut

    I have a problem with v3.0 of NWBC that I have recently installed.  Upon double clicking on the desktop shortcut icon, the initial NWBC 3.0 splash screen is displayed, but then nothing else happens.  I am not presented with any screen where I am able

  • Mac Book Pro to LG HD TV connection.

    I have a new Mac Book Pro with version 10.9. I am trying to show a slideshow on an LG HD TV. Connected with a mini display port to hdtv cable. TV says no input. What do I do next?

  • Problem getting bindings in managed bean after deployment on remote weblogic

    We have a Fusion Web application successfully running on Jdev 12c and its integrated wls server with Oracle 12c database configured as a DataSource. We created an ear file from JDev and deployed it on remote wls servers. The initial login .jspx page

  • Instance name and Var for Input Text fields

    I have several Input Text fields, as a form, linked to a PHP script for which I require Var's for each field. But I also need Instance names for each field, so I can fix the tabIndex. Yet, everytime I test my movie, the text fields have their Paths (

  • Can't open my file after saving.using labview 8.2.1

    Hi there, after saving my program, i can't access/ or open my program again, but my subVI can be open, this puzzled me. Can anyone help me with this. i have attach the program,. it also prompt me (this resource you are attempting to open was created