Download problems in ALV report in ECC 6.0
Hello All,
While downloading ALV report to excel/txt by standard method.(Export> Local File> Spreadsheet)
I am facing an issue where I am getting 2 decimal places to a figure.
Where I do not require zeros if not necessary.
Eg. If the amnt is 200 then currently its showing like 200.00 but I want it like 200 only.
The type is char only.
Kindly please advice me how to overcome this problem.
Thanks,
Yogesh.
Hi Yogesh,
ALV behaves inconsistent: I used excel inplace function and got exactly what you required, even worse: In the grid, I have always 3 decimal places, in excel I got a maximum of 2 decimal places, one if there was only one and none if in grid it was .000.
No obvous solution.
You could create the grid cells as strings and remove all trailing zeros.
Regards,
Clemens
Similar Messages
-
Hi Friends,
I have the following 2 problems in ALV report
1) Logo is not getting displayed in the report.
2) When i click on the Purchase order number in the report the interactive report is not working,i am not able to see report of First interactive level.
can you help it out friends.
Thanks and regards
Dinesh
REPORT YSDBALV1
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line .
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
read table p_i_event with key name = slis_ev_top_of_page into i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAPLOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
write:/ IT_FINAL-ebeln.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display*& Report YSDBALV1
REPORT YSDBALV1.
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line ,
wa_event type line of slis_t_event.
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table p_i_event with key name = slis_ev_top_of_page into wa_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAP_LOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
set parameter id 'VL1' field it_final-ebeln.
call transaction 'ME23N'.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display
Regards,
Rusidar S. -
Regarding download of the ALV report to excel
Hi experts,
I have an ALV report which took long time to extract records from various table. So while there is some restriction the report can be executed well in foreground. And the report can be extracted well to excel sheet. But while there is hudge records, i have to execute the report in backgroung. And then from spool i generally prefers to download the report to excel.
There is a field UOM where it contains value ' " ' for some records. And also there may be possiblity that other fields can also contain the same.
Now my problem is: while download to excel... When ever there is a value ' " ' from this point to the next value ' " '. It is treating as one record. and keep that in a same position in the excel sheet.
But i want to keep all the values in there respective fields. Can you please how can i do that? Please give me some solution...
regards,
charles.Actually now I think there is another way to do this, storing file on application server can create problems as sometimes the users don't have directory write access or things like that.
Instead you should export your data to a memory or database cluster and import it back using abother program.
The proposed changes would be
1: At the point you are calling your alv grid function, check if the sy-batch is 'X' for background job, if yes than export to database table INDX or you can create your own. suppose your data is in internal table ITAB than in case of background job, you will do
data: keyf like indx-srtfd.
*We just assign username, date time to this
concatenate sy-uname sy-datum sy-uzeit into keyf.
EXPORT itab TO DATABASE indx(ZZ) ID keyf.
check for subrc if export is successfull.
Now you have stored your itab in database for later processing. remember to have keyf. In case of background job you can have it write in the output so from spool output you can check what was the keyf to use.
You have to write another program to import itab from database and download it or display it.....
This program will have keyf as input parameter and you must define ITAB same as the orignal program.
parameters: p_keyf like like indx-srtfd.
import itab from database indx(ZZ) id keyf.
*Now you have itab. do whatever you want with it. download it using GUI_DOWNLOAD function or display it in an ALV grid.......
Hope you got the overall idea. -
Excel sheet download problem from ALV
Hi all,
when i am trying to download an ALV report into localfile... Excel, two middle coloum values are not appeared in excel sheet but headings are available.
last three coloums values are overlapped in these headings.
Where might be the problem exist?Hi,
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV? http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV? http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV? http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://www.sap-img.com/abap/what-is-alv-programming.htm
http://www.sap-img.com/abap-function.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
http://www.sap-img.com/abap-function.htm -
Hi,
While downloading the data from the ALV report the last few columns are coming on next line when data is more.
Wht should i do?? Pl help..
Regards,
RushikeshHi,
I have faced the same kind of problem but not with downloading , while uploading the excel file to SAP. The problem is that, If the line of excel sheet exceed 4096 characters, it used to take the remaining first line as a second line. Whatever be th FM, the same problem will come up I hope, because I_TAB_RAW_DATA field of a FM is of type : <b>types truxs_t_text_data(4096) type c occurs 0.</b>
-SatyaPriya -
Importing problems in alv report (stored versions)
HI ALL, i have;
DATA gt_results TYPE sp_data_type OCCURS 0 WITH HEADER LINE .
FORM X .
EXPORT gt_results TO DATABASE sp_ver_dat ID INDXKEY.
ENDFORM .
FORM Y .
IMPORT gt_results FROM DATABASE sp_ver_dat ID INDXKEY.
ENDFORM .
I coded this for storing alv datas as a version . Suppose i executed "form x" in 2008. After 1 year later, i would like to see this 2008 record. But my internal table type (sp_data_type) was changed (This change is obligatory). In example new 2 fields were added and 1 field was deleted. In spite of this, i have an error when i am attempting to run "form y" because clustered data in database does not fit gt_results anymore.
How can i run such old stored versions of this alv report? How should i design this subroutines so there will be no problems even if internal table type frequently change in future..?
I am expecitng your suggestions..
Thanks..I think this is good solution for the versions which we will be created . Unfortunately there is no way to save (excute) old versions in which structure of internal table has changed many times. We have to handle them manually..
It means, we can save future but not past..
ISN'T IT?
Thanks all -
Hi all,
I have a Problem with the ALV report felated to FI Data. Where in the Selection screen I have two fields Commitment Item, Fund Center and Fiscal Year. When i am executing the report it is printing correctly.
The Problem is that when i give a commitment which is not related to the Fund Center It is displaying all the records.
That is nothing but it is displaying all the data where the data of the selection screen is not in the internal table.
instead i should display a message that the Commitment item is not related to Fund Center. and the ALV Should not print any values. How do i achieve this?
Please help me in solving the problem. Rewards will be awarded.
Message was edited by:
sravan varanasiHi,
Here is a small ex.
SELECT mtart mtbez FROM t134t
INTO CORRESPONDING FIELDS OF TABLE it_t134t
WHERE mtart IN so_mtart AND spras = 'EN'.
IF sy-subrc = 0.
*********PERFORM display
ELSE.
MESSAGE ID 'Selection error' TYPE 'E' NUMBER '0040'.
ENDIF.
Hope useful.
Regards
Harish. -
Problem in ALV report o/p to Excel
Hi to all
I have developed an ALV report, which is showing correct display and out put.
But when I am downloading it to excel, o/p is not coming in proper way. Fields are misplaced from there actual place and not in readable condition.
Please guide me..
Regards
AnubhavHello Lakshmiraj
I am sending you the coding of my ALV report program.
Please check.
REgards
Anubhav
*& Report YRMR033_AMENDMENT_ORDER_LIST
*& DEVELOPER : ANUBHAV GUPTA
*& DATE : 21.03.2008
*& REPORT DESCRIPTION : REPORT TO DISPLAY AMENDMENTS IN PURCDHASE ORDERS
WITH OLD VALUES AND NEW VALUES.
REPORT YRMR033_AMENDMENT_ORDER_LIST LINE-SIZE 132 NO STANDARD PAGE HEADING
LINE-COUNT 065(001)
MESSAGE-ID VR.
TABLES: DD04T,
CDHDR,
CDPOS,
DD03L,
DD41V,
T685T,
VBPA,
TPART,
KONVC,
EKKO.
TABLES : NAST, LFA1,ekpo.
SELECT-OPTIONS: "XUDATE FOR nast-erdat OBLIGATORY, "Created on date
XUDATE FOR CDHDR-UDATE OBLIGATORY, "Amendment date
S_EKGRP FOR EKKO-EKGRP,
s_lifnr for ekko-lifnr.
SELECTION-SCREEN SKIP.
DATA: WFLAG,
WCHANGENR LIKE CDHDR-CHANGENR.
DATA: INDTEXT(60) TYPE C.
DATA: BEGIN OF ICDHDR OCCURS 50.
INCLUDE STRUCTURE CDHDR.
DATA: END OF ICDHDR.
DATA: BEGIN OF ICDSHW OCCURS 50.
INCLUDE STRUCTURE CDSHW.
DATA: END OF ICDSHW.
DATA: BEGIN OF EKKEY,
EBELN LIKE EKET-EBELN,
EBELP LIKE EKET-EBELP,
ETENR LIKE EKET-ETENR,
END OF EKKEY.
DATA: BEGIN OF ITAB OCCURS 50,
BEGIN OF EKKEY,
EBELN LIKE EKET-EBELN,
EBELP LIKE EKET-EBELP,
ETENR LIKE EKET-ETENR,
END OF EKKEY,
ebeln like ekko-ebeln,
ebelp like ekpo-ebelp,
CHANGENR LIKE CDHDR-CHANGENR,
UDATE LIKE CDHDR-UDATE,
UTIME LIKE CDHDR-UTIME,
USERNAME LIKE CDHDR-USERNAME,
CHNGIND LIKE CDSHW-CHNGIND,
FNAME LIKE CDSHW-FNAME, "ADDED BY ANUBHAV
FTEXT LIKE CDSHW-FTEXT,
OUTLEN LIKE CDSHW-OUTLEN,
F_OLD LIKE CDSHW-F_OLD,
F_NEW LIKE CDSHW-F_NEW,
END OF ITAB.
DATA : BEGIN OF ITAB1 OCCURS 0,
EBELN LIKE EKET-EBELN,
bedat like ekko-bedat,
EBELP LIKE EKET-EBELP,
txz01 like ekpo-txz01,
lifnr like ekko-lifnr,
name1 like lfa1-name1,
UDATE LIKE CDHDR-UDATE,
FTEXT LIKE CDSHW-FTEXT,
F_OLD LIKE CDSHW-F_OLD,
ekgrp like ekko-ekgrp,
F_NEW LIKE CDSHW-F_NEW,
CHANGENR LIKE CDHDR-CHANGENR,
UTIME LIKE CDHDR-UTIME,
USERNAME LIKE CDHDR-USERNAME,
CHNGIND LIKE CDSHW-CHNGIND,
FNAME LIKE CDSHW-FNAME, "ADDED BY ANUBHAV
OUTLEN LIKE CDSHW-OUTLEN,
AMDNO TYPE CHAR4,
END OF ITAB1.
DATA: OLD_OBJECTID LIKE CDHDR-OBJECTID.
INTERNAL TABLES
----"modification
DATA: BEGIN OF I_NAST OCCURS 0,
OBJKY TYPE NAST-OBJKY,
ERDAT TYPE NAST-ERDAT,
KAPPL TYPE NAST-KAPPL,
KSCHL TYPE NAST-KSCHL,
PARVW TYPE NAST-PARVW,
PARNR TYPE NAST-PARNR,
ERUHR TYPE NAST-ERUHR,
AMDNO TYPE CHAR4,
EBELN TYPE EKKO-EBELN,
END OF I_NAST.
DATA : I_NAST1 LIKE TABLE OF I_NAST WITH HEADER LINE.
DATA: BEGIN OF I_TAB OCCURS 0,
OBJKY TYPE NAST-OBJKY,
ERDAT TYPE NAST-ERDAT,
KAPPL TYPE NAST-KAPPL,
KSCHL TYPE NAST-KSCHL,
PARVW TYPE NAST-PARVW,
PARNR TYPE NAST-PARNR,
ERUHR TYPE NAST-ERUHR,
END OF I_TAB.
DATA: INDEX TYPE I.
TYPE-POOLS : SLIS.
ALV Declarations *
DATA: W_REPID LIKE SY-REPID,
P_I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
P_I_HEADING TYPE SLIS_T_LISTHEADER,
I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT,
I_HEADING TYPE SLIS_T_LISTHEADER.
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
SR TYPE I.
INITIALIZATION----
INITIALIZATION.
CLEAR I_NAST.
CLEAR I_TAB.
REFRESH I_NAST.
REFRESH I_TAB.
AT SELECTIN SCREEN----
AT SELECTION-SCREEN.
PERFORM DATA_VALIDATION.
TOP OF PAGE----
TOP-OF-PAGE.
PERFORM TOP_OF_PAGE.
END OF PAGE----
END-OF-PAGE.
START OF SELECTION----
START-OF-SELECTION.
PERFORM BUILD_COMMENT USING I_HEADING.
PERFORM EVENT_BUILD CHANGING I_EVENTS.
SELECT * FROM EKKO . " WHERE EBELN IN XEBELN AND
*LIFNR IN XLIFNR.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID = EKKO-EBELN.
PERFORM GETCHGDOCS.
ENDSELECT.
DELETE ITAB WHERE ( FNAME NE 'NETPR'
AND FNAME NE 'NETWR'
AND FNAME NE 'MENGE' ).
loop at itab.
read table itab.
itab-ebeln = itab-ekkey+0(10).
itab-ebelp = itab-ekkey+11(4).
modify itab.
endloop.
LOOP AT ITAB.
MOVE-CORRESPONDING ITAB TO ITAB1.
APPEND ITAB1.
ENDLOOP.
LOOP AT ITAB1.
SELECT OBJKY ERDAT KAPPL KSCHL PARVW PARNR ERUHR
FROM NAST
INTO CORRESPONDING FIELDS OF TABLE I_NAST
WHERE OBJKY = ITAB1-EBELN
AND KAPPL = 'EF'
AND KSCHL = 'ZNEU'
AND PARVW = 'LF'
AND SPRAS = SY-LANGU.
IF SY-SUBRC NE 0.
DELETE ITAB1.
ENDIF.
LOOP AT I_NAST.
MOVE-CORRESPONDING I_NAST TO I_NAST1.
APPEND I_NAST1.
ENDLOOP.
ENDLOOP.
SORT I_NAST1 BY OBJKY ASCENDING ERDAT DESCENDING ERUHR DESCENDING.
DELETE ADJACENT DUPLICATES FROM I_NAST1 COMPARING OBJKY.
* Select data from TABLE NAST to get ebeln before selected date
IF I_NAST1[] IS NOT INITIAL.
SELECT OBJKY ERDAT KAPPL KSCHL PARVW PARNR ERUHR
FROM NAST
INTO CORRESPONDING FIELDS OF TABLE I_TAB
FOR ALL ENTRIES IN I_NAST1
WHERE OBJKY = I_NAST1-OBJKY
AND ERDAT <= I_NAST1-ERDAT
AND PARNR = I_NAST1-PARNR
AND KAPPL = 'EF'
AND KSCHL = 'ZNEU'
AND PARVW = 'LF'
AND SPRAS = SY-LANGU.
ENDIF.
Logic to get no of amendments for one po
LOOP AT I_NAST1.
CLEAR INDEX.
LOOP AT I_TAB WHERE OBJKY = I_NAST1-OBJKY.
INDEX = INDEX + 1.
ENDLOOP.
I_NAST1-AMDNO = INDEX - 1.
I_NAST1-EBELN = I_NAST1-OBJKY.
MODIFY I_NAST1 TRANSPORTING AMDNO EBELN.
ENDLOOP.
*LOOP AT I_NAST1.
*READ TABLE ITAB1 WITH KEY EBELN = I_NAST1-EBELN.
*IF SY-SUBRC = 0.
*ITAB1-AMDNO = I_NAST1-AMDNO.
*MODIFY ITAB1 TRANSPORTING AMDNO .
*ENDIF.
*ENDLOOP.
DELETE I_NAST1 WHERE AMDNO = 0. "ADDED BY ANUBHAV
LOOP AT ITAB1.
READ TABLE I_NAST1 WITH KEY EBELN = ITAB1-EBELN.
IF SY-SUBRC NE 0.
DELETE ITAB1.
ENDIF.
ENDLOOP.
loop at itab1.
select single *
from ekko
into ekko
where ebeln = itab1-ebeln.
if sy-subrc = 0.
itab1-bedat = ekko-bedat.
itab1-lifnr = ekko-lifnr.
itab1-ekgrp = ekko-ekgrp.
modify itab1.
endif.
endloop.
DELETE ITAB1 WHERE EKGRP NOT IN S_EKGRP.
DELETE ITAB1 WHERE LIFNR NOT IN S_LIFNR.
loop at itab1.
select single *
from lfa1
into lfa1
where lifnr = itab1-lifnr.
if sy-subrc = 0.
itab1-name1 = lfa1-name1.
modify itab1.
endif.
endloop.
loop at itab1.
select single *
from ekpo
into ekpo
where ebeln = itab1-ebeln
and ebelp = itab1-ebelp.
if sy-subrc = 0.
itab1-txz01 = ekpo-txz01.
modify itab1.
endif.
endloop.
sort itab1 by udate descending ebeln ebelp.
building field catelogue
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'Itab1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_L = 'PO NO '.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'Itab1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'BEDAT'.
WA_FIELDCAT-SELTEXT_L = 'PO DATE '.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'Itab1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_L = 'Item No '.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'Itab1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'TXZ01'.
WA_FIELDCAT-SELTEXT_L = 'Item Description'.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'Itab1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-SELTEXT_L = 'Vendor NO '.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'Itab1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'NAME1'.
WA_FIELDCAT-SELTEXT_L = 'Vendor Name'.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'ITAB1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'UDATE'.
WA_FIELDCAT-SELTEXT_L = 'Amendment Date'.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'ITAB1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'FTEXT'.
WA_FIELDCAT-SELTEXT_l = 'Change Field Description'.
WA_FIELDCAT-just = 'L'.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'ITAB1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'F_OLD'.
WA_FIELDCAT-SELTEXT_L = 'Old Value '.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
ADD 1 TO SR.
WA_FIELDCAT-COL_POS = SR.
WA_FIELDCAT-ROW_POS = 1.
WA_FIELDCAT-TABNAME = 'ITAB1'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-FIELDNAME = 'F_NEW'.
WA_FIELDCAT-JUST = 'L' .
WA_FIELDCAT-SELTEXT_L = 'New Value '.
APPEND WA_FIELDCAT TO P_I_FIELDCAT.
CLEAR WA_FIELDCAT.
DATA : L_REPID TYPE SYREPID,
L_REPID1 LIKE DISVARIANT.
L_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = 'X'
I_CALLBACK_PROGRAM = L_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = P_I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT = L_REPID1
IT_EVENTS = I_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form GETCHGDOCS
text
FORM GETCHGDOCS.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = CDHDR-UDATE
OBJECTCLASS = CDHDR-OBJECTCLAS
OBJECTID = CDHDR-OBJECTID
TIME_OF_CHANGE = CDHDR-UTIME
USERNAME = CDHDR-USERNAME
TABLES
I_CDHDR = ICDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
CHECK SY-SUBRC EQ 0.
DELETE ICDHDR WHERE CHANGE_IND EQ 'I'.
CHECK NOT ICDHDR[] IS INITIAL.
LOOP AT ICDHDR.
CHECK ICDHDR-UDATE IN XUDATE.
CHECK ICDHDR-USERNAME IN XNAME.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
CHANGENUMBER = ICDHDR-CHANGENR
IMPORTING
HEADER = CDHDR
TABLES
EDITPOS = ICDSHW
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
CHECK SY-SUBRC EQ 0.
DELETE ICDSHW WHERE ( CHNGIND NE 'U' OR TABNAME NE 'EKPO' ).
LOOP AT ICDSHW.
CHECK ICDSHW-TEXT_CASE EQ SPACE.
MOVE-CORRESPONDING ICDSHW TO ITAB.
MOVE-CORRESPONDING ICDHDR TO ITAB.
MOVE ICDSHW-TABKEY+3 TO ITAB-EKKEY.
APPEND ITAB.
ENDLOOP.
ENDLOOP.
ENDFORM. "GETCHGDOCS
*& Form BUILD_COMMENT
text
-->P_I_HEADING text
FORM BUILD_COMMENT USING P_I_HEADING TYPE SLIS_T_LISTHEADER.
DATA: WA_LINE TYPE SLIS_LISTHEADER,
TEXT1(50) TYPE C,
TEXT2(40) TYPE C,
W_DATE1(10) TYPE C,
W_DATE2(10) TYPE C.
CONCATENATE ' CHAMBAL FERTILISERS AND CHEMICALS LIMITED' ' ' INTO TEXT1.
WA_LINE-TYP = 'H'.
WA_LINE-INFO = TEXT1.
APPEND WA_LINE TO P_I_HEADING.
CLEAR TEXT1.
CONCATENATE ' AMENDED ORDERS' ' ' INTO TEXT1.
WA_LINE-TYP = 'S'.
WA_LINE-INFO = TEXT1.
APPEND WA_LINE TO P_I_HEADING.
write xudate-low to w_date1 DD/MM/YYYY .
write xudate-high to w_date2 DD/MM/YYYY .
concatenate 'PERIOD FROM : ' W_DATE1 ' TO ' W_DATE2 INTO TEXT2 SEPARATED BY SPACE.
WA_LINE-TYP = 'S'.
WA_LINE-INFO = TEXT2.
APPEND WA_LINE TO P_I_HEADING.
ENDFORM. " build_comment
*& Form EVENT_BUILD
text
-->P_I_EVENTS text
FORM EVENT_BUILD CHANGING P_I_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENT TYPE SLIS_ALV_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_I_EVENTS.
READ TABLE P_I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO W_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO W_EVENT-FORM.
APPEND W_EVENT TO P_I_EVENTS.
ENDIF.
ENDFORM. " event_build
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_HEADING
I_LOGO = 'CFCLLOGO'.
ENDFORM. " top_of_page -
Hi friends,
i have created alv report .no problem of getting output . but i m getting question mark in the standard menu. it is displaying 10 question mark (sub menu has print preview etc), edit ,question marks(ABC Analysis) ,question marks (abap list viewer etc ), settings ,system , help.
i don't want these question marks. how to candle this.i haven't moved to test or production , but iwant to know in development why it is coming..
if any one knows please let me know.
thanks and regards,
kani.The Problem is with some GUI inconsistency.
to overcome there are 2 solutions.
1. You need to run a program Which i don't remember exactly.
2. Using the Status event.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
I_CALLBACK_PF_STATUS_SET = 'STATUS' "important
it_sort = it_sort
TABLES
t_outtab = it_data
EXCEPTIONS
program_error = 1.
form status using extab tyoe slis_t_extab.
"This status you can set using the program SAPLKKBL
" go to se41 transaction, enter the program name SAPLKKBL
"status as STANDARD , and click the Button Copy status
"Now in the popup for Option to enter your program name and
"press ok, then save and activate the status
"now come here and activate the code and test now..
set pf-status 'STANDARD' excluding extab.
endform. -
ALV report in ECC 6.0 'TOP-OF-PAGE'
Hi Friends,
Please, Kindly help me on below issue with Alv report for 'TOP-OF-PAGE' in ECC 6.0.
I have written the following code for "top-of-page' which is not getting the text given on this event, please help me if i committed any mistake in code.
type-pools : slis.
TABLES : KNA1,VBAK.
TYPES: BEGIN OF ty_kna1,
kunnr TYPE kna1-kunnr,
land1 TYPE kna1-land1,
name1 TYPE kna1-name1,
ort01 TYPE kna1-ort01,
END OF ty_kna1.
TYPES: BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln,
erdat TYPE vbak-erdat,
ernam TYPE vbak-ernam,
netwr TYPE vbak-netwr,
END OF ty_vbak.
DATA : W_KNA1 TYPE TY_KNA1,
W_VBAK TYPE TY_VBAK,
I_KNA1 TYPE STANDARD TABLE OF TY_KNA1,
I_VBAK TYPE STANDARD TABLE OF TY_VBAK.
DATA : W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : V_REPID LIKE SY-REPID.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCAT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT .
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'KUNNR'.
W_FIELDCAT-SELTEXT_M = 'CUST NAME'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'LAND1'.
W_FIELDCAT-SELTEXT_M = 'COUNTRY'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'NAME1'.
W_FIELDCAT-SELTEXT_M = 'NAME'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'ORT01'.
W_FIELDCAT-SELTEXT_M = 'CITY'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form DATA_RETRIEVAL
text
--> p1 text
<-- p2 text
form DATA_RETRIEVAL .
SELECT KUNNR LAND1 NAME1 ORT01 FROM KNA1
INTO TABLE I_KNA1
WHERE KUNNR IN S_KUNNR.
endform. " DATA_RETRIEVAL
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = I_KNA1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
*& Form BUILD_LISTHEADER
text
-->P_IT_LISTHEADER text
form BUILD_LISTHEADER using i_listheader TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'CUSTOMER DETAILS'.
HLINE-TYP = 'H'.
append hline to it_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
endform. " BUILD_LISTHEADER
*& Form EVENT_CALL
text
--> p1 text
<-- p2 text
form EVENT_CALL .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " EVENT_CALL
*& Form POPULATE_EVENT
text
--> p1 text
<-- p2 text
form POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
Thanks in Advance,
Chandra.type-pools : slis.
TABLES : KNA1,VBAK.
TYPES: BEGIN OF ty_kna1,
kunnr TYPE kna1-kunnr,
land1 TYPE kna1-land1,
name1 TYPE kna1-name1,
ort01 TYPE kna1-ort01,
END OF ty_kna1.
TYPES: BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln,
erdat TYPE vbak-erdat,
ernam TYPE vbak-ernam,
netwr TYPE vbak-netwr,
END OF ty_vbak.
DATA : W_KNA1 TYPE TY_KNA1,
W_VBAK TYPE TY_VBAK,
I_KNA1 TYPE STANDARD TABLE OF TY_KNA1,
I_VBAK TYPE STANDARD TABLE OF TY_VBAK.
DATA : W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : V_REPID LIKE SY-REPID.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCAT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT .
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'KUNNR'.
W_FIELDCAT-SELTEXT_M = 'CUST NAME'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'LAND1'.
W_FIELDCAT-SELTEXT_M = 'COUNTRY'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'NAME1'.
W_FIELDCAT-SELTEXT_M = 'NAME'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-TABNAME = 'I_KNA1'.
W_FIELDCAT-FIELDNAME = 'ORT01'.
W_FIELDCAT-SELTEXT_M = 'CITY'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form DATA_RETRIEVAL
text
--> p1 text
<-- p2 text
form DATA_RETRIEVAL .
SELECT KUNNR LAND1 NAME1 ORT01 FROM KNA1
INTO TABLE I_KNA1
WHERE KUNNR IN S_KUNNR.
endform. " DATA_RETRIEVAL
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = I_KNA1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
*& Form BUILD_LISTHEADER
text
-->P_IT_LISTHEADER text
form TOP_OF_PAGE using i_listheader TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'CUSTOMER DETAILS'.
HLINE-TYP = 'H'.
append hline to it_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
endform. " BUILD_LISTHEADER
*& Form EVENT_CALL
text
--> p1 text
<-- p2 text
form EVENT_CALL .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " EVENT_CALL
*& Form POPULATE_EVENT
text
--> p1 text
<-- p2 text
form POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
just change the code as i have u will get it
plz reward points if useful -
Filter Function problems on ALV report. [Resolved]
Hi,
I developed an ALV report by using function as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
* I_CALLBACK_PF_STATUS_SET = status_set
* I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME = 'T_BSIK'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
TABLES
T_OUTTAB = TAB_BSIK.
And this ALV custom report is referenced from standard function FBL5N.
After i completed this report, i made an comparision of FBL5N and my custom report.
When I apply the filter function, for example, on the document type, I cannot input 2 characters in the document type field under the filter function. The field length is only 1 character. Similar case results on the field document date.
While the standard function FBL5N works very nice.
What should i do to make the filter function of my own ALV report as the same as the standard function FBL5N do?
Thanks in advance.
Lala
Message was edited by:
Hoo lalaOh, i found where the problem is...
add below 2 statements, then the question is resolved.
LS_FIELDCAT-ref_fieldname = ****
LS_FIELDCAT-ref_tabname = ***
FORM FIELDCAT_INIT tables RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-COL_POS = 3.
LS_FIELDCAT-FIELDNAME = 'BLART'.
LS_FIELDCAT-TABNAME = 'TAB_BSIK'.
LS_FIELDCAT-SELTEXT_L = 'Document Type'.
LS_FIELDCAT-ref_fieldname = 'BLART'.
LS_FIELDCAT-ref_tabname = 'BSIK'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
endform.
Fine now.
Lala -
Problems in Z Reports in ECC 6.0
Hi,
We r upgrading the SAP from 4.7 E to ECC 6.0 and facing few problems in Z Reports in New Version..Like...
1)..Incorrect value in the dynamic table..
2)..Literals that take up more than one line not permitted.
3)..Missing parameter with PERFORM.
4)..Error in ASSIGN statement in program "SAPLSDSD".
5)..Not Unicode Convertible.
Please help me out of these problems..
Regards,
AnilHi,
regarding your problems the solution is that in ECC 6.0 the programs should be unicode compatible.the fields which are declared with type
were no more allowed in 6.0.
regarding unicode u can check the following threads..
What is the Use of Unicode Check
SDN Wiki - Standard Reference for Unicode Migration-Common ABAP Errors & Solution
SDN Wiki - Standard Reference for UNICODE PROBLEMS and SOLUTIONS -
Hi
I have this ALV Report when I run and change the layout (add/remove column and add column for sorting) it works fine but when i come back i get the change columns but it doesn't save the sorting options that i made.
Here is my Code
*& Report ZAKTIME *
*& AKABIR 02/06/2007 New Report for Cluster B2 *
REPORT ZAKTIME no standard page heading message-id zw line-size 255.
* Dictionary tables/structures
tables: pa0007, PA0002.
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE,
IT_PT TYPE PDCPT OCCURS 0 WITH HEADER LINE,
IT_ALP TYPE PC20E OCCURS 0 WITH HEADER LINE,
IT_C1 TYPE PC25X OCCURS 0 WITH HEADER LINE,
IT_PSP TYPE PC2BA OCCURS 0 WITH HEADER LINE.
* Global ALV Data Declarations
type-pools slis.
DATA: BEGIN OF tgetbuff occurs 0,
x(10),
END OF tgetbuff.
include rpcxB200.
INCLUDE RPTBAL01.
* infotypes: 0001. "Org. Zuordnung
Data: TempHours LIKE PC2BF-BEGUZ,
even type i value 0.
data: begin of hd,
struc like dd03l-tabname,
end of hd.
DATA: BEGIN OF REC OCCURS 0,
PERNR LIKE PERNR-PERNR,
SSN Like pa0002-perid,
NAME(25),
TYPE(1),
WRKS LIKE PC2BA-TPROG,
DATE(10),
STIME(8),
ETIME(8),
HOURS LIKE PC2BF-BEGUZ,
PNUMB LIKE PC20E-PRAKN,
PID LIKE PC20E-PRAKZ,
UNIT LIKE PC20E-ANZHL,
VALU LIKE PC20E-BWGRL,
AMOUNT LIKE PC20E-BETRG,
XPAYID LIKE PC20E-AUFKZ,
CCNTR LIKE PC25X-KOSTL,
CCODE LIKE PC25X-BUKRS,
AUFNR LIKE PC25X-AUFNR,
KTEXT LIKE CAUFV-KTEXT,
LGART LIKE PC2BF-LGART,
LGTXT LIKE T512T-LGTXT,
STER LIKE PDCPT-BTERM,
ETER LIKE PDCPT-ETERM.
DATA: END OF REC.
data:
begin of x_sortinfo_alv occurs 0,
spos like alvdynp-sortpos,
fieldname type slis_fieldname,
tabname type slis_fieldname,
up like alvdynp-sortup,
down like alvdynp-sortdown,
group like alvdynp-grouplevel,
subtot like alvdynp-subtotals,
comp(1) type c,
expa(1) type c,
obligatory(1) type c,
end of x_sortinfo_alv,
v_variant like disvariant,
v_repid like sy-repid,
v_save(1) type c,
lv_sortseq type i,
s_title(20), "Maximum selection field description 20 bytes.
fieldcat type slis_t_fieldcat_alv,
ls_line type slis_listheader,
gd_layout type slis_layout_alv,
gt_sort type slis_t_sortinfo_alv,
ls_sort type slis_sortinfo_alv,
events type slis_t_event,
list_top_of_page type slis_t_listheader,
top_of_page type slis_formname value 'TOP_OF_PAGE',
v_exit(1) type c.
constants:
alv_slis_formname type slis_formname value 'ALV_USER_COMMAND',
c_yes like space value 'X',
c_no like space value space.
DATA: BEGIN OF E_NAME,
NACHN LIKE PA0002-NACHN,
VORNA LIKE PA0002-VORNA.
DATA: END OF E_NAME.
* define selection screen
selection-screen begin of block elmo with frame title text-001.
selection-screen begin of line.
selection-screen comment 1(22) text-005.
select-options opt4 for pa0007-schkz.
selection-screen end of line.
parameters: debg_lst as checkbox default 'X'.
selection-screen end of block elmo.
selection-screen begin of block blk2 with frame title text-002.
PARAMETERS: p_vari like disvariant-variant.
selection-screen end of block blk2.
* Form Initialization
initialization.
clear: REC.
refresh: REC.
v_repid = sy-repid.
v_save = 'A'.
clear v_variant.
v_variant-report = v_repid.
* Get default variant
alv_variant = v_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = v_save
changing
cs_variant = alv_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = alv_variant-variant.
endif.
* At Selection-Screen event (value help)
at selection-screen on value-request for p_vari.
perform f4_for_variant.
* At Selection-Screen event (check input data)
at selection-screen on p_vari.
if p_vari <> space.
v_variant-report = v_repid.
v_variant-variant = p_vari.
call function 'REUSE_ALV_VARIANT_SELECT'
EXPORTING
i_dialog = c_no
it_default_fieldcat = field_tab[]
i_layout = gs_layout
CHANGING
cs_variant = v_variant.
if sy-subrc <> 0.
call function 'REUSE_ALV_VARIANT_SELECT'
EXPORTING
i_dialog = c_yes
it_default_fieldcat = field_tab[]
i_layout = gs_layout
CHANGING
cs_variant = v_variant.
endif.
endif.
* main logic
TOP-OF-PAGE.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0001 SPACE PNPBEGDA PNPENDDA.
* process the data according to the payroll area
IF PERNR-WERKS EQ P0001-WERKS AND PERNR-BTRTL EQ P0001-BTRTL
AND PERNR-KOSTL EQ P0001-KOSTL AND PERNR-BUKRS EQ P0001-BUKRS
AND PERNR-ABKRS EQ P0001-ABKRS AND PERNR-KOKRS EQ P0001-KOKRS.
PERFORM RETRIEVE_Time.
ENDIF.
END-OF-SELECTION.
Perform call_alv.
*======================================================================*
* forms *
*======================================================================*
FORM RETRIEVE_Time.
DATA: date_modified(10), V_STIME(8), V_ETIME(8).
DATA: Flag(1),
v_lgtxt like T512T-LGTXT,
v_ktext like caufv-ktext,
v_WRKS LIKE PC2BA-TPROG.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
EXPORTING
get_begda = PNPBEGDA
get_endda = PNPENDDA
TABLES
get_periods = it_t549q
EXCEPTIONS
no_period_found = 1
no_valid_permo = 2.
CHECK sy-subrc = 0.
LOOP AT it_t549q.
FLAG = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
EXPORTING
get_pernr = PERNR-PERNR
get_pabrj = it_t549q-pabrj
get_pabrp = it_t549q-pabrp
TABLES
GET_TBUFF = TGETBUFF
get_zl = it_zl
get_pt = it_PT
get_alp = it_ALP
get_c1 = it_C1
get_psp = it_psp
EXCEPTIONS
no_period_specified = 1
wrong_cluster_version = 2
no_read_authority = 3
cluster_archived = 4
technical_error = 5.
LOOP AT it_zl.
IF it_ZL-DATUM >= PNPBEGDA AND it_ZL-DATUM <= PNPENDDA.
* Include PSP Data if Exists.
LOOP AT IT_PSP.
IF it_psp-ZMODN IN OPT4 AND it_zl-DATUM EQ it_psp-DATUM.
MOVE it_psp-ZMODN TO REC-WRKS.
FLAG = 1.
Move:
Pernr-Pernr To REC-PERNR,
'Z' To REC-TYPE,
it_ZL-LGART TO REC-LGART,
it_ZL-ANZHL TO REC-HOURS.
perform get_ssn.
perform get_wage_type_text using REC-LGART v_lgtxt.
move v_lgtxt to REC-LGTXT.
CONCATENATE it_zl-DATUM+4(2) '/' it_zl-DATUM+6(2) '/' it_zl-DATUM(4) INTO date_modified.
IF it_ZL-BEGUZ <> ''.
CONCATENATE it_ZL-BEGUZ(2) ':' it_ZL-BEGUZ+2(2) ':' it_ZL-BEGUZ+4(2) INTO V_STIME.
ELSE.
V_STIME = ''.
ENDIF.
IF it_ZL-ENDUZ <> ''.
CONCATENATE it_ZL-ENDUZ(2) ':' it_ZL-ENDUZ+2(2) ':' it_ZL-ENDUZ+4(2) INTO V_ETIME.
ELSE.
V_ETIME = ''.
ENDIF.
Move:
date_modified To REC-DATE,
V_STIME To REC-STIME,
V_ETIME To REC-ETIME.
* Include ALP Data if Exists else include Blanks.
MOVE:
'' TO REC-UNIT,
'' TO REC-PNUMB,
'' TO REC-PID,
'' TO REC-VALU,
'' TO REC-AMOUNT,
'' TO REC-XPAYID.
IF it_ZL-ALZNR GT 0.
LOOP AT IT_ALP.
IF it_zl-ALZNR EQ it_ALP-ALZNR.
MOVE:
it_ALP-ANZHL TO REC-UNIT,
it_ALP-PRAKN TO REC-PNUMB,
it_ALP-PRAKZ TO REC-PID,
it_ALP-BWGRL TO REC-VALU,
it_ALP-BETRG TO REC-AMOUNT,
it_ALP-AUFKZ TO REC-XPAYID.
ENDIF.
ENDLOOP.
ENDIF.
* Include C1 Data if Exists Else Include Blanks.
MOVE:
'' TO REC-CCODE,
'' TO REC-CCNTR,
'' To REC-AUFNR,
'' TO REC-KTEXT.
IF it_ZL-C1ZNR GT 0.
LOOP AT IT_C1.
IF it_zl-C1ZNR EQ it_c1-C1ZNR.
MOVE:
it_C1-BUKRS TO REC-CCODE,
it_C1-KOSTL TO REC-CCNTR,
it_C1-AUFNR To REC-AUFNR.
perform get_service_order_text using REC-AUFNR v_ktext.
move v_ktext to rec-ktext.
ENDIF.
ENDLOOP.
ENDIF.
APPEND REC.
* ENDIF FOR the IF on IT_PSP
ENDIF.
ENDLOOP.
* ENDIF FOR the IF on Date Check
ENDIF.
* ENDLOOP ON IT_ZL
ENDLOOP.
LOOP AT it_pt.
IF it_PT-LDATE >= PNPBEGDA AND it_PT-LDATE <= PNPENDDA.
* Include PSP Data if Exists.
LOOP AT IT_PSP.
IF IT_PSP-ZMODN IN OPT4 AND it_pt-LDATE EQ it_psp-DATUM.
MOVE it_psp-ZMODN TO REC-WRKS.
FLAG = 1.
Move:
Pernr-Pernr To REC-PERNR,
'P' to REC-TYPE,
it_pt-BTERM TO REC-STER,
it_pt-ETERM TO REC-ETER.
perform get_ssn.
CONCATENATE it_pt-LDATE+4(2) '/' it_pt-LDATE+6(2) '/' it_pt-LDATE(4) INTO date_modified.
IF it_pt-BEGTM NE ''.
CONCATENATE it_pt-BEGTM(2) ':' it_pt-BEGTM+2(2) ':' it_pt-BEGTM+4(2) INTO V_STIME.
ELSE.
V_STIME = ''.
ENDIF.
IF it_pt-ENDTM NE ''.
CONCATENATE it_pt-ENDTM(2) ':' it_pt-ENDTM+2(2) ':' it_pt-ENDTM+4(2) INTO V_ETIME.
ELSE.
V_ETIME = ''.
ENDIF.
Move:
date_modified To REC-DATE,
V_STIME To REC-STIME,
V_ETIME To REC-ETIME.
TempHours = ''.
IF it_pt-BEGTM LT it_pt-ENDTM.
TempHours = it_pt-ENDTM(4) - it_pt-BEGTM(4).
TempHours = TempHours / 100.
ENDIF.
MOVE:
TempHours TO REC-HOURS,
'' TO REC-LGART,
'' TO REC-LGTXT,
'' TO REC-UNIT,
'' TO REC-PNUMB,
'' TO REC-PID,
'' TO REC-VALU,
'' TO REC-AMOUNT,
'' TO REC-XPAYID,
'' TO REC-CCODE,
'' TO REC-CCNTR,
'' TO REC-AUFNR,
'' TO REC-KTEXT.
APPEND REC.
ENDIF.
ENDLOOP.
ENDIF.
ENDLOOP.
IF FLAG = 0 AND debg_lst = 'X'.
Move:
Pernr-Pernr To REC-PERNR,
'' To REC-TYPE,
'' TO REC-DATE,
'' TO REC-STIME,
'' TO REC-ETIME,
'' TO REC-LGART,
'' TO REC-LGTXT,
'' TO REC-HOURS,
'' TO REC-UNIT,
'' TO REC-PNUMB,
'' TO REC-PID,
'' TO REC-VALU,
'' TO REC-AMOUNT,
'' TO REC-XPAYID,
'' TO REC-CCODE,
'' TO REC-CCNTR,
'' To REC-AUFNR,
'' To REC-KTEXT,
'' TO REC-STER,
'' TO REC-ETER.
perform get_ssn.
PERFORM LOAD_SHIFT using v_WRKS.
Move v_WRKS TO REC-WRKS.
IF REC-WRKS IN OPT4.
APPEND REC.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " RETRIEVE_PAYROLL
* CALL_ALV
form call_alv.
* v_repid = sy-repid.
perform build_field_catalog using field_tab[].
perform build_eventtab using events[].
perform comment_build using header_alv[].
perform build_sorttab using gt_sort[].
perform build_layout.
* v_variant-variant = '/TEST3'.
* Call ABAP List Viewer
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = field_tab[]
i_structure_name = 'REC'
i_callback_program = v_repid
is_variant = v_variant
it_events = events[]
it_sort = gt_sort[]
i_save = v_save
is_layout = gd_layout
tables
t_outtab = REC
exceptions
program_error = 1
others = 2.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog USING pt_fieldcat type
slis_t_fieldcat_alv.
clear: fieldcat, pt_fieldcat[]. refresh: fieldcat.
data: ls_fieldcat type slis_fieldcat_alv.
ls_fieldcat-tabname = 'REC'.
ls_fieldcat-edit = ' '.
ls_fieldcat-fieldname = 'PERNR'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'PERNR'.
ls_fieldcat-seltext_l = 'Employee #'.
ls_fieldcat-outputlen = 15.
ls_fieldcat-no_sum = 'X'. "Don't use field for totals
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'NAME'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'NAME'.
ls_fieldcat-seltext_l = 'Employee Name'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'TYPE'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'TYPE'.
ls_fieldcat-seltext_m = 'Type'.
ls_fieldcat-outputlen = 4.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'DATE'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'DATE'.
ls_fieldcat-seltext_l = 'Date'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'WRKS'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'WRKS'.
ls_fieldcat-seltext_m = 'Daily Sch'.
ls_fieldcat-outputlen = 10.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'STIME'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'STIME'.
ls_fieldcat-seltext_l = 'Start Time'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'ETIME'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'ETIME'.
ls_fieldcat-seltext_l = 'End Time'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'HOURS'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'HOURS'.
ls_fieldcat-seltext_s = 'Hours'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'PNUMB'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'PNUMB'.
ls_fieldcat-seltext_l = 'Premium #'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'PID'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'PID'.
ls_fieldcat-seltext_l = 'Premium Id'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'UNIT'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'UNIT'.
ls_fieldcat-seltext_s = 'Unit'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'VALU'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'VALU'.
ls_fieldcat-seltext_s = 'Valuation Basis'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'AMOUNT'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'AMOUNT'.
ls_fieldcat-seltext_s = 'Amount'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'XPAYID'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'XPAYID'.
ls_fieldcat-seltext_s = 'Extra Pay ID'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'CCNTR'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'CCNTR'.
ls_fieldcat-seltext_l = 'Cost Center'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'CCODE'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'CCODE'.
ls_fieldcat-seltext_l = 'Company Code'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'AUFNR'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'AUFNR'.
ls_fieldcat-seltext_l = 'Service Number'.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'KTEXT'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'KTEXT'.
ls_fieldcat-seltext_l = 'Service Number Text'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'LGART'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'LGART'.
ls_fieldcat-seltext_l = 'Wage Type'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'LGTXT'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'LGTXT'.
ls_fieldcat-seltext_l = 'Wage Type Text'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'STER'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'STER'.
ls_fieldcat-seltext_l = 'Starting Terminal'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'ETER'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'ETER'.
ls_fieldcat-seltext_l = 'Ending Terminal'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-edit = ' '.
endform.
* BUILD_EVENTTAB
form build_eventtab using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = events.
read table events with key name = slis_ev_top_of_page into tmp_event.
if sy-subrc = 0.
move top_of_page to tmp_event-form.
append tmp_event to events.
endif.
endform.
* COMMENT_BUILD
form comment_build using pt_top_of_page type slis_t_listheader.
data: v_head_string(255) value space, d1(2), m1(2), y1(2), d2(2), m2(2), y2(2).
clear: ls_line, pt_top_of_page.
ls_line-typ = 'H'.
data pnpfrom(10).
data pnpto(10).
data: print_date(10).
data: print_time(10).
d1 = PNPBEGDA+6(2). d2 = PNPENDDA+6(2).
m1 = PNPBEGDA+4(2). m2 = PNPENDDA+4(2).
y1 = PNPBEGDA+2(2). y2 = PNPENDDA+2(2).
concatenate m1 '/' d1 '/' y1 into pnpfrom.
concatenate m2 '/' d2 '/' y2 into pnpto.
d1 = sy-datum+6(2). d2 = sy-uzeit+2(2).
m1 = sy-datum+4(2). m2 = sy-uzeit+0(2).
y1 = sy-datum+2(2). y2 = sy-uzeit+4(2).
concatenate m1 '/' d1 '/' y1 into print_date.
concatenate m2 ':' d2 ':' y2 into print_time.
ls_line-info = sy-repid.
append ls_line to pt_top_of_page.
concatenate 'Printed by:' sy-uname 'on' print_date 'at' print_time
into ls_line-info separated by space.
append ls_line to pt_top_of_page.
ls_line-info = 'BGM INDUSTRIES, INC.'.
append ls_line to pt_top_of_page.
concatenate 'Supply Period:' pnpfrom 'to' pnpto
into ls_line-info separated by space.
append ls_line to pt_top_of_page.
endform.
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-info_fieldname = 'LINE_COLOR'.
endform. " BUILD_LAYOUT
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'Z_BGLOGO'
it_list_commentary = header_alv.
endform.
*& Form build_sorttab
* Set up the sorting for the report.
form build_sorttab using pt_sort type slis_t_sortinfo_alv.
clear lv_sortseq.
perform build_sort tables pt_sort changing ls_sort.
ls_sort-fieldname = 'PERNR'.
ls_sort-subtot = 'X'.
append ls_sort to pt_sort.
ls_sort-subtot = ' '.
perform build_sort tables pt_sort changing ls_sort.
ls_sort-fieldname = 'NAME'.
ls_sort-subtot = 'X'.
append ls_sort to pt_sort.
ls_sort-subtot = ' '.
endform. " build_sorttab
* Use to add another sort field.
form build_sort
tables pt_sort
changing ls_sort structure x_sortinfo_alv.
clear ls_sort.
add 1 to lv_sortseq.
ls_sort-spos = lv_sortseq.
ls_sort-up = 'X'.
ls_sort-tabname = 'REC'.
endform. "build_sort
*} INSERT
*& Form GET_SSN & EMP Name
* text
FORM GET_SSN.
SELECT SINGLE * FROM PA0002 WHERE PERNR = PERNR-PERNR.
IF SY-SUBRC EQ 0.
MOVE: PA0002-PERNR TO REC-SSN,
PA0002-VORNA TO E_NAME-VORNA,
PA0002-NACHN TO E_NAME-NACHN.
CONDENSE E_NAME.
MOVE: E_NAME TO REC-NAME.
ENDIF.
ENDFORM. " GET_SSN
* Form GET_WAGE_TYPE_TEXT
form get_wage_type_text using rec-LGART p_v_lgtxt.
select single LGTXT from T512T into p_v_lgtxt
where LGART = rec-LGART.
endform. " GET_WAGE_TYPE_TEXT
* Form GET_SERVICE_ORDER_TEXT
form get_service_order_text using rec-AUFNR p_v_ktext.
select single ktext from caufv into p_v_ktext
where aufnr = rec-aufnr.
endform. " GET_SERVICE_ORDER_TEXT
*& Form LOAD_SHIFT
* text
FORM LOAD_SHIFT USING V_WRKS.
SELECT SINGLE * FROM PA0007 WHERE PERNR = REC-PERNR.
IF SY-SUBRC EQ 0.
MOVE: PA0007-SCHKZ TO V_WRKS.
ENDIF.
ENDFORM.
*& Form f4_for_variant
form f4_for_variant.
call function 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = v_variant
i_save = v_save
IMPORTING
e_exit = v_exit
es_variant = alv_variant
EXCEPTIONS
not_found = 2.
if sy-subrc = 2.
message id sy-msgid type 'S' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if v_exit = space.
p_vari = alv_variant-variant.
endif.
endif.
endform. " f4_for_variant
Please help. I will reward Points for the right answers.
ThanksOk found the problem at last
ls_fieldcat-fieldname = 'PERNR'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'PERNR'.
ls_fieldcat-seltext_l = 'Employee #'.
ls_fieldcat-outputlen = 15.
ls_fieldcat-no_sum = 'X'. "Don't use field for totals
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
clear ls_fieldcat.
In my build catalog i was clearing every field using the
clear ls_fieldcat.
which was some how clearing the sortings...
SO commented them out and it works. -
Problem with ALV Report Column
Hi
I have ALV report that got tons of columns and most of them are showing correctly. But there are two or three where i have a do sum checked got a small problem. The HEADING of the columns says NUMBER instead of its column name...
Look at my code:
ls_fieldcat-fieldname = 'ETIME'.
ls_fieldcat-ref_tabname = 'REC'.
ls_fieldcat-ref_fieldname = 'ETIME'.
ls_fieldcat-seltext_s = 'ET '.
ls_fieldcat-seltext_m = 'Et Tm '.
ls_fieldcat-seltext_l = 'End Time '.
append ls_fieldcat to pt_fieldcat.
ls_fieldcat-fieldname = 'HOURS'.
ls_fieldcat-ref_tabname = 'PC2BF'.
ls_fieldcat-ref_fieldname = 'ANZHL'.
ls_fieldcat-seltext_s = 'Hrs '.
ls_fieldcat-seltext_m = 'Hors '.
ls_fieldcat-seltext_l = 'Hours'.
ls_fieldcat-decimals_out = 2.
ls_fieldcat-no_zero = 'X'.
ls_fieldcat-datatype = 'DEC'.
ls_fieldcat-do_sum = 'X'.
append ls_fieldcat to pt_fieldcat.
ls_fieldcat-no_zero = ''.
ls_fieldcat-datatype = ''.
ls_fieldcat-outputlen = ''.
ls_fieldcat-do_sum = ''.
ls_fieldcat-decimals_out = ''.
ls_fieldcat-fieldname = ''.
ls_fieldcat-fieldname = 'PNUMB'.
ls_fieldcat-ref_tabname = 'PC20E'.
ls_fieldcat-ref_fieldname = 'PRAKN'.
ls_fieldcat-seltext_s = 'P# '.
ls_fieldcat-seltext_m = 'Pre # '.
ls_fieldcat-seltext_l = 'Premium # '.
ls_fieldcat-datatype = 'NUMC'.
append ls_fieldcat to pt_fieldcat.
ls_fieldcat-datatype = ''.
The column with Hours is showing NUMBER with the total sum but the column before and after that shows correctly.
I have tried taken out the
<b> ls_fieldcat-do_sum = 'X'.</b>
Then its shows correctly but i need it to do the sum.
Is there anything i need to do in order to show the columns correctly?
Please help. <b><REMOVED BY MODERATOR></b>. thanks
Message was edited by:
Anwarul Kabir
Message was edited by:
Anwarul Kabir
Message was edited by:
Alvaro Tejada Galindohere is the whole program. you can upload this run it for your self if that helps in any way...
*& Report ZHEADCOUNT *
REPORT ZHEADCOUNT no standard page
heading message-id zw line-size 255.
* Dictionary tables/structures
tables: teven,
ZSHIFTS,
ZHEADCT.
* Global ALV Data Declarations
type-pools slis.
include: rpcxB200, RPTBAL01.
DATA: BEGIN OF REC OCCURS 0,
PERNR LIKE TEVEN-PERNR,
LDATE LIKE TEVEN-LDATE,
LTIME LIKE TEVEN-LTIME,
SATZA LIKE TEVEN-SATZA,
TERID LIKE TEVEN-TERID,
PLANS LIKE TEVEN-PLANS.
DATA: END OF REC.
data:
begin of x_sortinfo_alv occurs 0,
spos like alvdynp-sortpos,
fieldname type slis_fieldname,
tabname type slis_fieldname,
up like alvdynp-sortup,
down like alvdynp-sortdown,
group like alvdynp-grouplevel,
subtot like alvdynp-subtotals,
comp(1) type c,
expa(1) type c,
obligatory(1) type c,
end of x_sortinfo_alv,
d like scal-indicator,
v_variant like disvariant,
v_repid like sy-repid,
v_save(1) type c,
lv_sortseq type i,
s_title(20),
fieldcat type slis_t_fieldcat_alv,
ls_line type slis_listheader,
gd_layout type slis_layout_alv,
gt_sp_group type slis_t_sp_group_alv,
gt_sort type slis_t_sortinfo_alv,
ls_sort type slis_sortinfo_alv,
events type slis_t_event,
list_top_of_page type slis_t_listheader,
top_of_page type slis_formname value 'TOP_OF_PAGE',
v_exit(1) type c,
v_pdsnr like assob-pdsnr,
ls_fieldcat type slis_t_fieldcat_alv.
constants:
alv_slis_formname type slis_formname value 'ALV_USER_COMMAND',
c_yes like space value 'X',
c_no like space value space,
c_dev LIKE sy-sysid VALUE 'DEV',
c_device(4) TYPE c VALUE 'LOCL'.
* define selection screen
selection-screen begin of block elmo with frame title text-001.
selection-screen begin of line.
selection-screen comment 1(30) text-002.
select-options p_terid for TEVEN-TERID.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(30) text-003.
select-options p_shift for ZSHIFTS-DWS.
selection-screen end of line.
selection-screen end of block elmo.
selection-screen begin of block blk2 with frame title text-004.
PARAMETERS: p_vari like disvariant-variant.
selection-screen end of block blk2.
* Form Initialization
initialization.
v_repid = sy-repid.
v_save = 'A'.
clear v_variant.
v_variant-report = v_repid.
* Get default variant
alv_variant = v_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = v_save
CHANGING
cs_variant = alv_variant
EXCEPTIONS
not_found = 2.
if sy-subrc = 0.
p_vari = alv_variant-variant.
endif.
* At Selection-Screen event (value help)
at selection-screen on value-request for p_vari.
perform f4_for_variant.
* At Selection-Screen event (check input data)
at selection-screen on p_vari.
if p_vari <> space.
v_variant-report = v_repid.
v_variant-variant = p_vari.
call function 'REUSE_ALV_VARIANT_SELECT'
EXPORTING
i_dialog = c_no
it_default_fieldcat = field_tab[]
i_layout = gs_layout
CHANGING
cs_variant = v_variant.
if sy-subrc <> 0.
call function 'REUSE_ALV_VARIANT_SELECT'
EXPORTING
i_dialog = c_yes
it_default_fieldcat = field_tab[]
i_layout = gs_layout
CHANGING
cs_variant = v_variant.
endif.
endif.
* main logic
TOP-OF-PAGE.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0001 SPACE PNPBEGDA PNPENDDA.
* process the data according to the payroll area
IF PERNR-WERKS EQ P0001-WERKS AND PERNR-BTRTL EQ P0001-BTRTL
AND PERNR-KOSTL EQ P0001-KOSTL AND PERNR-BUKRS EQ P0001-BUKRS
AND PERNR-ABKRS EQ P0001-ABKRS AND PERNR-KOKRS EQ P0001-KOKRS.
PERFORM RETRIEVE_Time.
ENDIF.
END-OF-SELECTION.
Perform call_alv.
*==================================*
*=================================*
FORM RETRIEVE_Time.
Clear: REC.
Select * from teven where PERNR EQ PERNR-PERNR
AND TERID IN p_terid
AND LDATE >= PNPBEGDA
AND LDATE <= PNPENDDA.
MOVE:
TEVEN-PERNR TO REC-PERNR,
TEVEN-LDATE TO REC-LDATE,
TEVEN-LTIME TO REC-LTIME,
TEVEN-SATZA TO REC-SATZA,
TEVEN-TERID TO REC-TERID,
TEVEN-PLANS TO REC-PLANS.
APPEND REC.
endselect.
ENDFORM. " RETRIEVE_PAYROLL
* CALL_ALV
form call_alv.
perform build_field_catalog using field_tab[].
perform build_eventtab using events[].
perform comment_build using header_alv[].
perform build_sorttab using gt_sort[].
perform build_layout.
* Call ABAP List Viewer
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_repid
i_callback_user_command = 'ALV_USER_COMMAND'
i_structure_name = 'REC'
it_fieldcat = field_tab
it_special_groups = gt_sp_group
it_sort = gt_sort
i_save = v_save
is_variant = v_variant
it_events = events
is_layout = gd_layout
tables
t_outtab = REC
exceptions
program_error = 1
others = 2.
endform. "call_alv
* BUILD_FIELD_CATALOG
form build_field_catalog USING pt_fieldcat type
slis_t_fieldcat_alv.
* data: ls_fieldcat type slis_fieldcat_alv.
clear: fieldcat, pt_fieldcat[].
data : l_tabname type slis_tabname. " Table Name
l_tabname = 'REC'.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = v_repid
i_internal_tabname = l_tabname
i_inclname = v_repid
changing
ct_fieldcat = ls_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
* append ls_fieldcat to pt_fieldcat.
endif.
endform. "build_field_catalog
* BUILD_EVENTTAB
form build_eventtab using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = events.
read table events with key name = slis_ev_top_of_page into tmp_event.
if sy-subrc = 0.
move top_of_page to tmp_event-form.
append tmp_event to events.
endif.
endform. "build_eventtab
* COMMENT_BUILD
form comment_build using pt_top_of_page type slis_t_listheader.
data: v_head_string(255) value space, d1(2), m1(2), y1(2), d2(2), m2(2), y2(2).
clear: ls_line, pt_top_of_page.
ls_line-typ = 'H'.
data pnpfrom(10).
data pnpto(10).
data: print_date(10).
data: print_time(10).
d1 = PNPBEGDA+6(2). d2 = PNPENDDA+6(2).
m1 = PNPBEGDA+4(2). m2 = PNPENDDA+4(2).
y1 = PNPBEGDA+2(2). y2 = PNPENDDA+2(2).
concatenate m1 '/' d1 '/' y1 into pnpfrom.
concatenate m2 '/' d2 '/' y2 into pnpto.
ls_line-info = sy-repid.
append ls_line to pt_top_of_page.
concatenate 'Printed by:' sy-uname 'on' print_date 'at' print_time
into ls_line-info separated by space.
append ls_line to pt_top_of_page.
ls_line-info = 'BGM INDUSTRIES, INC.'.
append ls_line to pt_top_of_page.
concatenate 'Period:' pnpfrom 'to' pnpto
into ls_line-info separated by space.
append ls_line to pt_top_of_page.
endform. "comment_build
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
* gd_layout-totals_text = 'Totals'(255).
* gd_layout-info_fieldname = 'LINE_COLOR'.
endform. " BUILD_LAYOUT
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'Z_BGLOGO'
it_list_commentary = header_alv.
endform. "top_of_page
*& Form build_sorttab
* Set up the sorting for the report.
form build_sorttab using pt_sort type slis_t_sortinfo_alv.
clear lv_sortseq.
perform build_sort tables pt_sort changing ls_sort.
ls_sort-fieldname = 'PERNR'.
ls_sort-subtot = 'X'.
endform. " build_sorttab
* Use to add another sort field.
form build_sort
tables pt_sort
changing ls_sort structure x_sortinfo_alv.
clear ls_sort.
add 1 to lv_sortseq.
ls_sort-spos = lv_sortseq.
ls_sort-up = 'X'.
ls_sort-tabname = 'REC'.
endform. "build_sort
*& Form f4_for_variant
form f4_for_variant.
call function 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = v_variant
i_save = v_save
IMPORTING
e_exit = v_exit
es_variant = alv_variant
EXCEPTIONS
not_found = 2.
if sy-subrc = 2.
message id sy-msgid type 'S' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if v_exit = space.
p_vari = alv_variant-variant.
endif.
endif.
endform.
Message was edited by:
Anwarul Kabir -
How to add a push button(download) to my ALV Report to download report data
Hi,
I developed a normal alv report and now i want to add a push button ex.. download in the report output and then whwnever I am clicking this download button then download functionality will work.Please don't take it as simple from my point of view it is very imp. for me please help me.
Thanks.Hi,
Please check the below thread
Re: ADD button to ALV Grid
Thanks
Arul
Maybe you are looking for
-
I have the below config on ASA 8.0 I need to convert it to 9.2 name 10.2.17.80 BV-DVR name 10.2.13.80 SE-DVR name 10.2.23.80 ES-DVR name 10.2.10.80 NW-DVR name 10.2.10.81 NW-DVR2 name 10.2.1.76 C-DVR1 name 10.2.1.78 C-DVR2 name 10.2.1.80 C-DVR3 name
-
Problem:Excise invoice and ARE-1
Hi Friends, Please help me... thanks in advance... Below are the details for Exports Scenario. Customer 123 is from US. Company ABC is in India. In Sales Order,Pricing details C.type Name Amount Currcy Per U Cond.Value Currcy PR00 Price
-
I'm trying to capture Hi8 video in my Macbook Pro 17 (OS 10.5.8). I have connected my Hi8 tape deck (which does not have time code) to the Macbook Pro via an ADVC100 analog to DV convertor.. When I open the Final Cut Express capture window color bars
-
BPELConsole: Initiate does not show HTML or XML form to fill in variables
Hi, i am using a xsd with a cascaded import of other xsds. If i use one import layer everything is fine. But if i use something like: 1.xsd (imports 2.xsd) 2.xsd (imports 3.xsd) The BPELConsole refuses to show me a HTML or XML form where i can fill i
-
Lens Detection - SIGMA 18-250mm F3.5-6,3 DC Makro OS HSM
Hi Guys I recently purchased the lens mentioned above as a universal and travel lens. I did some shots to day and imported them into LR4. By Default I always do lens correction when importing but LR4 detects this lens as "18-150" only, no make, no mo