Download Reader 11 not recognized

Trying to upload pics onto Ebay. Keep getting message to download Reader 11. Downloaded it from Adobe website after attempting to do it while still on Ebay. Uninstalled Reader X. Re-started computer.
Running Windows and IE 10.
Help?

Windows 7...
However, I recently updated Internet Explorer to IE10 and there lies the problem. Finding out IE10 has flash player built in, which is causing some issues. My husband actually worked on this last night. He compared my settings with his laptop settings (which do allow him to upload photos to Ebay), and made the changes on my computer to match his laptop. I wish he would have written them down so I could help others struggling with this issue. But whatever he did, everything works fine now.
Thank you for responding so quickly!

Similar Messages

  • My fingerprint reader is not recognized by DigitalPersona when I upgraded to Windows 7

    My fingerprint reader worked with Vista but when I upgraded to Windows 7 it is not recognized by DigitalPersona. 
    I have a dv3-1075us with the AMD Turion X2 dual core mobile RM-72 2.10 Ghz processor.  I have updated the BIOS to F.15, there is not a biometrics option in the BIOS for me to turn on, Authentec Driver 20.0.18 dated 11-24-2009 (Device Manger does nto show an error), and running Digital Persona Personal version 4.11.3826.
    I have updated this from the troubleshooting section of the HP Support website.
    At the windows login I get a "Reader not detected" message and in DigitalPersona "The fingerprint reader is not connected.  Connect the reader."
    What further steps can I do to get my fingerprint reader working?
    Thank you for your help.

    I've got an HDX9350 that I originally ran on Vista, and later upgraded to 32-bit Windows 7 Ultimate. I managed to make most functionality run on that installation, albeit buggy and slow, running assorted drivers in compatibility mode.
    Earlier this week I installed the 64-bit version od Windows 7 Ultimate, because the upgraded installation did run into problems sometimes, requiring a long time to get an ip address etc. I was surprised to see a lot of drivers being automatically installed, includingdrivers for the AuthenTec 2501A fingerprint sensor.
    I stumbled upon AuthenTecs own basic software, allowing You to log onto the computer and that worked. Or was it Window' own? Never mind.
    Installing Digital persona resulted in no reader detected all of the time, despite following instructions on this forum.
    Installing HP's SimplePass, things worked straight away! Maybe Digital Persona isn't compatible with Windows 7, or with my HDX9350?
    A

  • My newly purchased Kingston 19-in-1 card reader is not recognized by the Mac

    I just received my Kingston 19-in-1 card reader and connected it directly to the back of my iMac (iintel) running on OS X Lion 10.7. It did not show up. I checked Disk Utility and it shows the following:
    Info EOS Digital
    Name: EOS Digital (my Canon DSLR)
    Type: Partition
    Mount Point: Not mounted
    File System: MS-DOS (FAT 32)
    Connect bus: USB
    Writable: Yes
    Capacity: 4.11 GB
    Can be formatted: Yes
    Partition number: 1
    I am positive the problem is due to the MS-DOS (FAT 32) file system (my other laptop is a PC running on Windows Vista), but I  don't
    know how to fix this. Since i did not want to lose any files on my CF card, I took a blank formatted card (formatted in camera) and took 2 photos. When connecting the reader to the Mac it did not register.
    I have a Sandisk 8-in-1 card reader which worked just fine on the PC, and the Kingston reader also works on the PC (after i tried all the above ). I have read other forum discussions whee people say that the Kingston card reader works on their Mac
    I am getting desperate. Can someone help me?
    By the way, I checked on two Apple Stores to try and get tech support and got "voice mail jail" which is most disappointing. I suspect this is Apple company policy forcing me to make an appointment (which I am willing to do, but for heavens sake, don't cut me off on the phone!)

    Thanks for your response. I plugged the Kingston card reader into my Mac this morning before turning on the computer and lo and behold, the test photos appeared. I wonder if there is a procedure where one as to do certain things first (e.g., connect card reader first before turning on computer). I will stick to the same computer port from now on. I do not consider myself out of the woods as I have to try this using Adobe Lightroom to post-process my photos.
    As for the software updte, Kingston advised that the update is not compatible with Macs, so I did not update.

  • I want to be able to download reader - but not install.

    I maintain a number of computers and I am trying to download Adobe Reader v9.4 wiothout installing - just the executable. Adobe's website insists on installing the application rather than giving me the option to save to a location. Am I missing something? Feeling pretty frustrated at the moment. Appreciate any assistance.

    They don't advertise it but you can get the full installers at their FTP site at ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/. You'll want to click
    on the version number for the installer you want. 9.3 and 9.4 are full installers, the ones in between are the updates.

  • Adobe Reader XI not recognizing Outlook as a default mail client! Help!

    Reader XI keeps telling me that there is no default mail client... when in fact Outlook is the default mail client! I have unistalled & re-installed reader xi... still same propblem. Working on a Windows 7 computer  with Outlook 2013.

    What does it say in Reader under Edit>Preferences>Email Accounts?

  • I have a new TV episode ready for download, but PC not recognizing it?

    I have a new TV episode ready for download (via an email message I received on my iPad), but I am on my PC right now and in iTunes and I get a message that no new downloads are ready. How can I get the TV episode downloaded on my PC (I bought a season's worth)?

    does your computer meet specs?  System requirements | Photoshop

  • "USB Hardware Not Recognized by Windows"

    Please help. I keep getting an error mssage "USB Hardware not Recognized by Windows" I believe i have tried it all. Uninstalled Itunes. Reinstalled Itunes.
    Okay I just tried pluggin it in as I typed this and it worked. The only thing I did diffrent was I unplugged my External Back-up drive.
    Is this Common? Can anyone help explain this to me?

    I have a combo floppy drive/USB 2.0 card reader and I believe I have the same problem.
    I'm not over-clocking and while USB shows up in WinXP in device manager the card reader is not recognized by the system even though I KNOW I have it connected correctly.  The floppy works fine.
    I believe the 4 USB ports on the mobo are non-functional but can't test it until Thursday sometime.
    Hopefully this is correctable with a BIOs update.
    Anyone else have issues with the USB ports on the mobo and if so, were you able to fix it?  How?

  • Card reader no longer recognized

    My Imac builtin card reader is not recognizing an SD card when it is inserted--have tried several that have been recognized fine in past. This has never happened before. Any suggestions?

    Please do a SMC reset, if that doesn't have restart in Safe Mode to clear some caches. Please report back what occurs after trying new cards.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • HT202213 itunes is not recognizing my iphone?

    why isnt itunes recognizing my iphone? new computer, just downloaded itunes

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

  • SMTP not recognized

    WWhen trying to send an email or message from my Dad's new IPhone 5 it will not work. It reads SMTP not recognized. Verizon said it's the phone but he had no problem before updates. He is using a comcast email. Verizon also said we'd have to go to the Apple store which is an hour + away. Anyone else having these issues?

    Thanks. I was able to delete the password and re-enter and all is fixed. One happy 83 year old Dad!  Thanks

  • Maxell multi cardreader not recognized

    howdy
    my Maxell multi card reader is not recognized by my G4 Powerbook
    I've checked the power settings restarted but still no recognition
    thought it may have been the reader
    but the company replaced it
    the brand new reader is the same
    any ideas

    figure out how to use this Maxell battery pack
    Could you possibly be a bit more specific?
    Do I just need to update my software?
    Probably not. You could try but since it said, “the currently attached accessory is not supported by this ipod." I would think this means the iPod does not support it.

  • Iphoto 11 is not recognizing jpeg files downloaded from camera and card reader. Nor will it allow me to transfer from image capture

    iphoto 11 is not recognizing jpeg files from either the camera and card reader. Canon Eos rebel dig. Nor will it allow me to transfer images from image capture to iphoto. No problem downloading to image capture.

    Sounds like a damaged card.  Get your photos off the card with Image Capture and then reformat the card in the camera.  Take some pictures and see if the card is recognized by iPhoto and the card reader.
    OT

  • I have downloaded the firefox 3.6.3, however My macbook, OS 10.6.3 has dialogue box reading" The following disk image couldn't be opened reason, not recognized. What are the next steps?

    I have downloaded Firefox 3.6.3dmg, however, when I attempt to open I get the following dialogue box: The following disk images couldn't be opened: Image Firefox 3.6.3dmg reason not recognized.
    == This happened ==
    Not sure how often
    == I tried to upgrade, it is unable to load on my Mac book with OS 10.6.3

    Make sure you download the correct version for your system. See [http://www.mozilla.com/firefox/all.html this page] to see all systems and languages.
    For help installing Firefox, see [http://support.mozilla.com/en-US/kb/Installing+Firefox this article].
    If the message appears even though you're doing everything right, please show me a [http://www.wikihow.com/Take-a-Screenshot-of-the-Entire-Screen screenshot] of it so we can work from there.

  • Tryiing to download Adobe Reader to my Imac - keep getting not recognized.

    I have a 2 year old 21.5 inch Imac which is running os 10.6.8.
    It keeps saying not recognized after I download the reader software no matter what version I use.
    help please

    What is saying not recognized and when?
    Try downloading from http://get.adobe.com/reader/enterprise/

  • Mac OS 10.5.6 downloaded Firefox 3.6.13 Came as .dmg When I try to launch it says "Not Recognized". Right click for "Open With" refers me to Disk Utility when same results "Not Recognized"

    About my Mac > G5 Desktop OS 10.5.6
    Want to upgrade to Firefox 3.6.13
    The download comes as a compressed file in .dmg format. When I attempt to launch the .dmg file to decompress I get a error message that says: The following disk images failed to mount: Image > Firefox 3.6.13 Reason > Not Recognized. When I right click to see what opening app it is directed to it says: Open with "DiskImageMounter (default). Disk Utility is offered as another opening resource when I direct the file to Disk Utility and go to Menu Bar select "File" then select "Open Disk Image" (or Cmd + "O") I get the same result. Have tried downloading the file twice more and get the same results

    Vk2mh it sounds like the download was not complete or corrupted.  Where are you downloading the update from?  Have you tried downloading again?

Maybe you are looking for