Download Recovery Manager

how to download recovery manager? I have an HP Pavilion 15-n259tx Notebook PC , OS Windows8.1 64-bit. Thanks

Sorry, can't be done.
If you wish to perform a factory restore, use the recovery disks hopefully when you got the computer or contact HP Customer Support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

Recovery Manager & downloading recovery manager problems 2014 version

Hi,
Firstly, I would like to say that I am sincerely greatful to Mumbodog for helping me with this problem.
Problem:
Recently bought an HP 250 G2 which had Windows 8 Home. I required Windows 8 Pro and used my upgrade disk to install. This inadvertantly wiped all other software including the HP Recovery Manager. It also made the laptop pretty much useless because all the hardware peripheral software was removed as well. If you have done this then you cannot use the recovery or pc reset tools available in Windows 8. This was extremely frustrating because there was a recovery partition available with all the software on it to restore my laptop to its original condition.
I tried everything suggested but many of the technicians simply did not understand what the problem was. Some even suggested using the recovery manager when individuals had specifically stated that the Recovery manager was unavailable to them or suggested links which then described a process that used the Recover manager.
I finally stumbled on this post and it worked. The HP recovery manager hides in F11 on boot. Please read Mumbodog post that follows:
Mumbodog
Associate Dean
Re: Download Recovery Manager
Options
‎09-21-2011 10:37 AM
The full recovery manager program is not available for download, the only way I know to get it back is to use HP Recovery from the hard drive (F11 at boot time) or Recovery media to re-install Windows and all the HP software. You will lose all personal data when you do this so back up before restoring.

Hi,
If you have created your USB Recovery, use this to perform the reinstallation.
If you don't have this, you can order a replacement Recovery USB Kit using the link below and use this to reinstall Windows.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP - make sure to specify that you require the USB Recovery Kit.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Recovery manager for probook 4530s

where can i download recovery manager for probook 4530s with supports as windows 8

Hi Prabu_23,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp recovery manager pro x2 612 tablet

i need download hp recovery manager for hp pro x2 612 tablet

Hi
You cannot download Recovery manager stand alone, it is a partition and if you have wiped it or removed it or deleated it. You can call HP & Order Recovery Disks from HP which has the OS and factory shipped software.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Where can I download HP Recovery Manager for my TouchSmart 610--1150xt running WIndows 7 x64?

Many users would prefer a clean install of Windows with the option to install only those applications that they personally find useful. Currently, if performing a clean install of Windows -- even if creating recovery disks and maintaining the HP recovery partition -- it is not possible to access the Recovery Manager with the option to re-install only the drivers and any useful preinstalled software. The only options under these circumstances is to perform a system restore back to the factory state thus removing an separate clean installation of the operating system or reinstalling the limited number of drivers and applications available for the TouchSmart from HP Support.
If it were possible to reinstall the HP Recovery Manager software, it should also be possible to selectively re-install needed drivers and applications from the recovery partition using the "Software Program Reinstallation" and "Hardware Driver Reinstallation" options. These options are not available from the boot menu or reinstall disks.
I have found downloads for the Recovery Manager software specific for Windows Vista and for certain specific HP laptops running WIndows 7, but I have been unable to locate a similar download for the TouchSmart 610 AIO. Has anyone located a download of the HP Recovery Manager software applicable for the TouchSmart 610?

This procedure uses the original factory installed HP OEM Windows product key and HP OEM certificate and requires the HP BIOS to have SLP/SLIC v2.1. This procedure will install a completely clean Windows 7 installation and may require the installation of HP drivers. Some HP drivers and/or HP software needed by your computer may not install because the OS is no longer branded as "HP". Please create your personal HP Recovery Disc set before continuing with these instructions. Back-up all of your personal data and files before proceeding with this process.
1) Download and unzip ABR Beta for Windows 7. Here is the main page to ABR for Windows Vista. Please follow the "How to use it" section for information and instructions on how to use it. These steps apply to Windows 7 as well. Perform the "activation backup" on your original hard drive with the factory HP OEM Windows installation, saving the backup files in several locations (USB stick, SD card, external drive, etc.).
2) Download your version (the version that was preinstalled on your HP computer) of Windows 7 from Official Windows 7 SP1 ISO from Digital River. Using the built-in Windows 7 CD/DVD burning software, burn the downloaded Windows 7 ISO image to a DVD.
3) Install Windows 7 from your new "Windows 7 disc" to your SSD, following all prompts as needed. Don't enter a Windows product key and don't allow Windows to try to auto-activate. After the Windows installation is complete, run ABR "activation restore" to "install" the previously backed up product key and certificate. Verify that Windows is activated, if not activated... repeat "activation restore" until Windows 7 is activated.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I, personally, have used the above procedure with great success on many HP desktops and laptops. I can't comment on how well it works with HP TouchSmart computers as I haven't had one to experiment on until recently.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Dv6775us HP Backup and Recovery Manager software corrupted - can't find download

I am getting an HP error message saying the HP Backup and Recovery Manager software has been corrupted and needs to be updated. For over an hour I have been frustrated trying to find where on this site to download a replacement of what was installed or an upgrade that would repair the problem.
Can anyone point me to where I can get the software? Thanks.
HP Pavilion dv6775us
Vista Home Advanced

Did you make a recovery disk set or usb recovery media?
If you did, then you are in luck because that is the software that can be used to reinstall the Recovery manager.
The downside is that you will have to do a factory image recovery to reinstall the software. A recovery is a destructive process, unlike a Windows stystem restore. A recovery will mean that you will needto save all of your data externally to avoid losing it and reinstall all of your programs after the recovery is complete.
Regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hp backup and Recovery manager application to download for windows 7 home premium 64-bit file

where to download file to install HP Backup and Recovery Manager for Windows 7 Home Premium 64-bit?
How to overcome 9996 error while installing cyberlink power director for Windows 7 Home Premium 64-bit?

Should the updates be installed in any particular order ? I have seen a post on the forums that it needs to be installed in a particular order

Download hp backup & recovery manager

Please inform me about a link to download the hp backup and recovery manager. I have the program installed on one hp pc but like to also have it on a new HP Folio 13 pc using windows 7 enterprise.

HI tajmaal74:
Thank you for your query. I am pleased to assist you!
I am unsure if you are trying to do a restore or just want the disks. When posting it is most useful to provide us your exact model of computer, and what operating system you are running.How Do I Find My Model Number or Product Number? click here. Here is documentation on system recovery or restore. Performing an Hp System Recovery(Windows 7) click here. Using the Downloadable USB Recovery Flash Disk Creation Utility click here. How to restore a Windows 7-based computer to a previous Windows installation by using the Windows.old folder. click here. I hope this helps, if you require further assistance please provide your model, and operating system.

Download hp recovery manager windows 10 64 bit

Hello everyone
i upgrade my laptop to windows 10 and Unfortunately i lost everything because i made some mistake,however i find some solution is to used "HP recovery manager"
i read many article about"HP recovery manager" but i can't find link useful for Windows 10.
so i wish anyone could help me to download hp recovery manager windows 10 64 bit.
thanks and regards
note:
Product number: J3S26EA#ABF HP 15-r040nf Notebook PC (ENERGY STAR) windows 64bit

petrosss wrote:
I am trying to Perform an HP system recovery (Windows 7) but is not working.
I press F11 and there is an error:
obviously I don't have the recovery manager and I also dont have the windows instalation disc, that's why I made a copy in a USB and tryed to install it that way. The screen shows a Windows BCD store issue. That should'nt be a big issue to resolve
So, the only solution is to order a recovery disc from HP and then I install the HP recory manager? It is the best solution.
by this way after doing that can I install the windows 7? You can always install Windows 7 as log as you have the twenty five character license activation key.
Once you have the recovery usb media you can put your notebook back into the state it was in when you removed it from the box whenever there is a serious issue. If Windows 7 was the OS it was delivered with then running the recovery manager and performing a factory image recovery will reinstall Windows 7 and the recovery partition.
Do yourself the favor of ordering the usb recovery media instead of a recovery disk set. USB recovery media is durable, unlike a recovery disk set, which can be damaged by a simple scratch on the label side.
****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem With Pavilion DV6 3052nr Recovery Manager!!!!!!!!

1. HP Pavilion DV6 3052nr
2.Windows Seven HomePre OA x64
3. On Recovery Manager : I Deleted all of my parttions on my hard disk. then when I used recovery disks to restore it to its factory set , after extracting the image files on disks to the hard drive , system restarted and boot to the Recovery manager with " Restore Incomplete " error. Just help me,pleaseeeeeeee

Hi:
You may have to purchase a set of HP recovery disks or if you can read all 25 characters of the W7 product key on the bottom of your notebook (DON'T POST IT), you can do this...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Recovery Manager not present and cannot install it

I am working on a friend's computer as a favor as he knows nothing about computers. I know some, but not much/enough about HP's. Windows failed so I entered Recovery Manager (f11) and made a backup image ( it had never been done on this computer) to a USB, Sony 32 gb. When I tried to boot from the USB during system recovery it would not boot. I tried changing BIOS settings removing protected boot and switching to legacy boot device, but it still would not boot. So I had downloaded a Win 8 install ios, burnt it to a DVD. It installed Win 8.1 fine, but it did not allow me back into Recovery Manager. I tired to use the Restore System but it still did not boot from the USB. Recovery Manager does not run. The restore partition is intact on the hard drive, so I have been trying to reinstall Recovery Manager with Windows running from RM/Tools/Rita-Tools/HPRecovery.exe. It will not finish installing RM. So I tried to install it from SW setup/RM4Win/installer.msi, but gives me "a script for this install to complete could not run. Contact your support or package vendor." Another time I tried it said the path was incorrect. I even tried copying the recovery image from the USB to the RM folder on the recovery partition but that gives me an incorrect path message too. I tried to find a file suggested on C;\Program files (x86)/Hewlett-Packard/HPRecovery Manager/Rebecca.exe but it is not there. I read that some USB's are not compatable but it did not giv e a compete list, only a few examples. Don't know where to find that list so I can buy another USB and copy the image over to it. Please, anyone, who actually with some indepth experience, would you help? I don't have much hair left from pulling it out.

WHen you get trouble with msi files you usually need the Microsoft Installer cleanup utility.
Here is a method for removal of iTunes and related programs with clean up and reinstall.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Can't re install HP Support Assistant nor HP Recovery manager

Both HP Support Assistant and Recovery Manager stopped working. I've tried to uninstall them and when I reinstall I get the following error messages:
"microsoft .NET framework 3.5 is not installed. It is required in order to Proceed with the HP support Assistant Installation. You may use windows update to have this component installed."
Well, the thing is: I use windows 7 and I have Microsoft .NET framework 4
Can anyone help? my notebook is
HP Pavilion dv6-6135dx Entertainment Notebook PC
This question was solved.
View Solution.

Install this http://www.microsoft.com/en-us/download/details.aspx?id=21
Then try reinstalling it again.
THX

Windows Vista / 7 Recovery manager installer?

I have a TX2500. Recently, the OS was corrupted warranting a format and reinstall.
Since I was unable to enter Windows to do this, I was unable to restore from the recovery manager. F11 doesn't work.
I don't have the ability to create a recovery disk, or USB drive, because I am unable to get into windows.
What I have been able to do:
reinstall a different OS (windows 7) without a product key for the purpose of troubleshooting only.
What I need to do:
Install the HP Recovery manager into windows 7 in order to a) run recovery from my recovery partition, or b) create a recovery disk / USB.
I am absolutely baffled that the recovery partition is not a stand alone installation, and instead requires a program to be installed and run from a functioning windows installation.
In order to install windows again, I need the recovery manager. In order to get the recovery manager, I apparantly have to reinstall windows.
After scouring the site, I've found a dozen references from "hp employees" to recovery manager patches. These do not help me, because I no longer have recovery manager.
All I need is the full installation for Windows 7 recovery manager, or some other way to access this apparantly useless lump of wasted hard drive space known as the "HP_RECOVERY" partition.

Thanks for the download.
Well, I've tried that download every way I could think of on multiple computers. All that ever happens is the file is unpacked, a "power recover" icon shows up on the taskbar (in the running programs section) for several seconds, then disappears. When running the installer directly from the unpacked files, the same thing happens.
I've tried this most recently on a clean format / install, then unpack / run the file, then restart when it finishes. Nothing appears under installed programs, nothing comes up when searching for it.
Each of the computers I've tried this on is running Windows 7. One of them is an identical laptop with the same recovery partition that was formatted and had Windows 7 installed on it a while ago. The only HP software it has are the drivers.
I don't have any versions of vista lying around, other than the inaccessible data in the recovery partition. I'd have to dig around a bit to find an old version of XP to try that, but I really haven't had time to do that recently. Ideally I would like to be able to install the HP Recovery Manager in windows 7, and use it to a) restore the stock version of vista on the laptop, or b) create a backup disk, and use that to install the stock version of vista to the laptop. The reason I can't just leave windows 7 on the laptop is because it's the installer for another computer, and I don't have a license for it.
Can you think of any other installers that work to put the recovery manager on a windows 7 computer?

HP Pavilion dv7-1285dx - No F11, Won't Boot Windows -- Recovery Manager PATH?

I am repairing an HP Pavilion dv7-1285dx for a friend. I have restored countless other computers but this one has driven me up the wall after 7 hours of trial and error and web searches.
Here's the deal:
--The computer came with Windows Vista
--The owner upgraded it to Windows 7 this past fall
--The comptuer came in contact with malware and will not boot
--When booting, the computer will slowly attempt to load Windows, will make it to the "welcome" screen, then restart itself, creating an infinite loop
--I do have a recovery DVD for the computer; the owner burned it apparently in late 2010
--I am proficient in MS-DOS and am comfortable using the command prompt
--The command prompt is the only way I can operate this computer at the moment. I do not have access to Windows of any sort, let alone the web
--I do have two other computers here that are mine, both are Macs and one dual-boots into Windows; I do have a few flash drives and can burn optical media if necessary
The F11 key does not work on this computer to bring up the recovery manager. I know why, too--the machine was upgraded to Windows 7, which wiped out the connection between the key and the program.
My hope is that I can find the path of the recovery manager somewhere. There was a windows.old directory on the drive; I was able to change it to Windows (the existing Windows was renamed windows.scrap).
This enabled me to at least get to an OS selection screen. There were three options: 7, 7 (recovery), and Vista (recovery). None of them are able to get me into Windows. The Vista option states it is corrupt while both 7s will try to unsuccessfully repair themselves.
I can, however, access the command prompt through the Windows recovery program (NOT the HP recovery program, which I need to restore anything from either the partition on the D: drive or the DVD).
I did notice all of the files on the DVD were in .zip format once I got deep enough in a directory. I'm debating about extracting them on one of my other comptuers to see if I can just get them over on another device, but my only external hard drive is Mac formatted so I'll have to use a USB stick.
There have been queries about this out there referring to making the D: partition active. However, all of these solutions require Windows, which I cannot use. The same is true of downloads.
My biggest question--where could the recovery program be buried? I would be willing to bring files over on another device IF AND ONLY IF THEY DO NOT REQUIRE WINDOWS.
The SMINST directory within Program Files (x86) is not present.
Basically, I need a DOS-compatible, non-Windows, way to restore this computer.
I have no other Windows installation discs for the machine currently with me. Also, the COA sticker on the bottom of the computer is extremely worn and I can only read a few digits of it, so I can't use that for a restore I guess.
On a final note--the fan in this comptuer is extremely annoying; any way to turn it off besides just the switch in the BIOS that toggles whether it runs all the time?

You don't need to be in Windows to mark the D:\Recovery partition Active. Just boot with a utility cd with the disk management capability. If you don't have one_Scroll down on the page and get>> Bootable CD If you don't have a burning app that can burn an ISO to cd get>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it.
Btw-have you tried booting from his Vista Recovery DVD? With the first disc in the CD/DVD drive power on the laptop and immediately tap Esc to bring up the menu. Then tap F9 Boot options. Use the arrow key to move down & highlight the Optical drive then tap Enter key. (No key is needed with Recovery DVDs)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP Pavilion g6-2101tu Notebook PC ,After BOIS update, Is HP Recovery Manager option available?

Hi,
I have recently installed BIOS and other drivers update through HP support assistent for the first time. During the installation a drive partition has been created with the name "HP_TOOL drive:f ".
I need your guidance for the recovery of system in the future and want to know about such partition which has been created automatically during update.
Eariler i have once recovered my system using tool which was provided by HP RECOVERY MANAGER through "esc + f11" keys. Hp recommands that we should not make any partition of drive in order to recover your system. if we make partition, we may lose system recovery through HP RECOVERY MANAGER.
I had 2 partition (Drive :c and Drive :d)of the drive by default from the begining when i have purchase my notebook but Now I have 3 (Drive: c,d,f).
Drive; c has system file while Drive: d has recovery and Drive: f contains HP_tool files.
"Please note thatI have not manually created any aprtition of drive till now."
My problems are as follows--
1. Is drive: f is a real partition of drive ?
2. Can i able to recover my system using my BIOS setting i.e esc + f11 key through HP RECOVERY MANAGER?
3. If i recover my system using HP RECOVERY MANAGER in future, i will have to download BIOS and drivers update again or what?
4: suggest me what should i do after BIOS update and with Drive:f to recover my system in the future?
My System details are as follows--
HP Pavilion g6-2101tu Notebook PC,
Product no. B6U26PA#ACJ
RAM - 2GB
Hard disk drive - 500 GB
Opreating System - Windows 7- 64 Bit Home Basic
Partition Drive :d - recovery.
Please give me a best response.,,,,,,,,,, Thanks

Yes, before Windows logo. At the first screen after powering on the machine tap Esc to bring up the Menu- same screen where you use Esc + F11 for Recovery.
Diagnostics is helpful many times in troubleshooting issues-such as testing memory or Hard drive.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Download Recovery Manager

Similar Messages

Maybe you are looking for