Download SAP Tutor Recorder and SAP Tutor Editor
Hi!
Where can I get the SAP Tutor Recorder and the SAP Tutor Editor to create own .sim files?
Thank you!
This might explain why the SAP Tutor Recorder cannot be found for download at any of the formerly referenced locations.
Excerpt from sap-ag.de/swdc > SAP Tutor for SAP Solution Manager customers
How can I get SAP Tutor and access to SAP's end user training best practices
If you are a SAP Solution Manager customer, you can now order the SAP Tutor software and access to SAP's best practices on end user online delta training via your Solution Manager.
For obtaining SAP Tutor without the above mentioned restrictions, please contact your SAP sales representative.
SAP Solution Manager 3.2 and later versions
A link in transaction SOLUTION_MANAGER -> "Goto" -> "Request SAP Tutor" leads to the order page.
included in the standard SAP maintenance fee for non-commercial usage.
Similar Messages
-
Connectivity between SAP ECC system and SAP BI
Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
Difference between SAP 4.6C and SAP ECC6.0
hi ,
Can any one give me the difference between SAP 4.6C and SAP ECC6.0 .
in respect to following points..
Assertions and Breakpoints
New Debugger
New Editor
Run Time Type Services (RTTS)
UnicodeHI Neha ,
ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
Thanks ,
Ashish Gupta -
Connection between SAP R/3 and SAP XI with RFC
Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Rajuhi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal -
SAP R/3 and SAP Netweaver: changes, advantages and disadvantages
Hello,
i am interested in SAP R/3 and SAP Netweaver. Are there existing articles which describe in detail the architecture of both systems and improvements of the new system. I want to know which changes the developers made an why they did it? What are the advantages of the new Netweaver system? Are there disadvantages? Does someone have some links to articles which deal with those questions? Thanks.
Kind regards,
PhilippDear Philipp,
There is a separate section for SAP Netweaver in SDN forum. Check that section and you will get the solution to your query.
This link might also be helpful:
help.sap.com/saphelp_nw2004s/helpdata/en/84/54953fc405330ee10000000a114084/content.htm
Regards,
Rakesh -
Differences between Product Version SAP ERP 2005 and SAP ECC 6.0
Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
JochenSAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy -
Difference between SAP 4.7EE and SAP ECC 6.0 in terms of ABAP
Hi all,
I would like to know the differences between the SAP-4.7EE and SAP ECC 6.0 in terms of ABAP?
can any body Please Help me?Hi Vijay,
In terms of ABAP some function modules are obsolete in 4.7.
e.g WS_UPLOAD, WS_DOWNLOAD etc.
You can find the list of obsolete FMs in the table RODIR.
These need to be replaced in the ECC System.
Also ECC is very strict in case of EPC Errors. You need to check the EPC and remove the call function interface errors where it says SLIN observes catching of a runtime error. These might work with no issues in 4.7 but will shortdump in ECC.
If you are doing to a unicode conversion also. you need to check the transaction UCCHECK for unicode errors.
You also need to replace obsolete statements like >< and => , =< etc.
Please let me know if you need any further info on this.
Thanks,
Sai -
SAP Predictive Analysis and SAP Infinite Insight Product Road Map
Hi everyone,
where can I find the current SAP Predictive Analysis and SAP Infinite Insight Product Road Map?
The latest version I found on SCN is from Dec. 2013.
Best Regards,
BJEHi,
The Predictive Analysis and InfiniteInsight road map was updated on SMP Sep 29:
https://websmp209.sap-ag.de/~sapidb/011000358700001160102012E.pdf -
Verify the data between SAP R/3 and SAP BW
Hi Experts,
How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
give me the proper solution.
Thanks,
SyamHello,
You must know what is the infoprovider source of the data shown in the report.
Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
Regards -
Diffrences Between SAP HR workflow and SAP Logistics workflow
Hello All,
Do we need to do any specific configuration settings to be done in the system to work on SAP HR workflow in ECC 6.0?
I am using SWU3 for automatic workflow customizing? But I am getting error indicator for u201CCheck Entries from HR Control Tablesu201D in the Maintain Definition Environment Node.
Are there any major differences between SAP HR workflow and SAP Logistics Workflow?
Regards
VenkatHi Mike,
what can be the impact if Check Entries from HR Control Tables setting are not maintain in the System. caz my workflow is going in waiting status and when i have chacked the container for that element then there in _Workitem.ExecuteByUser-ID is coming as <NOT SET>.
So can you please put some light on this.. that what can be the resion behind this ...?
Is this a Check Entries from HR Control Tables Problem or any other reason..
Thanks & regards
Dev -
Difference Between SAP R/3 and SAP CRM
hi firends,
Iam new to the SAP world.What is the difference between
SAP R/3 and SAP CRM.
What are the additional services provided by the SAP CRM?
How it does differs from R/3?
Can any one guide me.
Thanks in Advance
Ganga PrasadHello,
I think the best start is to look at the:
- <a href="http://www.sap.com/solutions/business-suite/crm/featuresfunctions/index.epx">mySAP Customer Relationship Management: Features & Functions</a>
- <a href="http://www.sap.com/solutions/business-suite/erp/featuresfunctions/index.epx">mySAP ERP: Features & Functions</a>
also the help at http://help.sap.com/ could be very valuable:
- <a href="http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm">mySAP Customer Relationship Management</a>
- <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm">SAP ERP Central Component, Release 5.0, SR1</a>
Regards
Gregor -
My question today: What are strengths and weaknesses of the
sap.m.Shell
and
sap.m.App
as container for an application wrapper?
I currently use non of them, but I see the advantages.
SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?We prefer to say, the tender mercies of the Fetch block.
You'll notice the "wfm info" cluster as an output of the Fetch
VI. This cluster has gain and offset members- use these to scale
your binary data to floating point voltage representation.
As you point out, the numbers won't be exactly what you expect given
the vertical range and the device resolution. There are a few
reasons for this. First, we don't use the absolute full scale of
the ADC for the maximum input voltage. There are a couple of
codes of headroom at the top and bottom. This allows your input
signal to slightly exceed the specified vertical range without clipping
(you'll get a warning from the driver). Second, these gain and
offset numbers take into account calibration information for your
device. Using these numbers will correct for small deviations
from the ideal offset and gain.
So if you use the gain and offset numbers from the driver, your
measurements will be more accurate than if you assume 0 offset and
perfect gain. They will be most accurate if you make sure to
perform a self-calibration once the device is in your system and at the
temperature that your tests will be run. -
What is SAP Bank Analyser, SAP Limits Monitoring and SAP Client Hierarchy
Hi Experts,
Could you please breifly explain functionality of
SAP Bank Analyser,
SAP Limits Monitoring and
SAP Client Hierarchy in BI 7.0http://help.sap.com/saphelp_bankanalyzer50/helpdata/en/f9/cdc23b95c8cb6fe10000000a114084/content.htm
http://www.sap.com/industries/banking/pdf/BWP_SB_Limit_Management_REV.pdf -
Difference Between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)
Dear All,
Could you please list out the differences between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)?
Thanks,
Rahul BhatHi Rahul,
These threads can give you some insight:
What's it gonna be: NW2004S?
NW2004 vs. NW2004s
Need help on Netweaver 2004 and Netweaver 2004s
/thread/196931 [original link is broken]
difference between 2004 and 2004s?
NetWeaver version question
Bye
Ankur
Maybe you are looking for
-
Home sharing not working on windows pc. Any help would be great!
I have recently obtained an Apple TV however I am currently unable to access my music on itunes via home sharing from my windows 7 pc. I have the latest version of iTunes, having updated it a few days ago, and have made sure that all of the apple acc
-
The load process runs in the SAP GUI and the GUI will timeout if someone do
Hi Our main issue: for loading DRW/BKT/Characteristics/Doc Files, I have already tested processing the Idocs in Background mode. All the Idocs failed because the background process on the SAP application server cannot access the doc files. (it has to
-
Does anyone can summarize how many Microphone Iphone 4 has? How each of them are used? From what I got from Apple tech support, there are two Mic, one on top and one on bottom: Top one mainly for nosie canclellation. Bottom one used for speak, record
-
Monster headphones - not able to use buttons
i bought a pair of monster headphones a few days ago and for some reason my lumia doesn't want me to be able to use the buttons on the headphones just wondering what i could do ive looked but i haven't found someone with a similar problem. they are h
-
3000 photos imported to iphoto. How do I print it out with date and time stamp on the photo. Can I use iPhoto to do it or 3rd party apps. Please provide details step. Thanks for your help~~~~ BR Marco 3000 photos imported to iphoto. How do I print it