Download Scanjet 300 drivers & sofware to my Mac

Hi,
Just bought a new Scanjet 300 scanner and because i have not a cd station in my macbook air i need to download drivers and software from the web.
Where i can find the driver and the sofware needed?

Hi,
You may download the drivers for Mac OS X v10.6 up to v10.9 from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dp-116947-2&cc=us&dlc=en&lc=en...
Scanning can be done via the front panel buttons or the Image capture application as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03368067&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Problem with HP Scanjet 300

    Hello, I bought an HP Scanjet 300 scanner and I have a problem with installing the drivers for it. When I open the CD and click on the black setup.exe icon, the setup launches and after a minute an error message pops up, saying hpzsetup.exe Access denied and only an OK button to click. There is no additional information or any further details.
    I am using Windows XP SP3, 32-bit OS. There is .NET Framework installed, and the user has administrator rights. There is enough disk space on the system partition.
    I found via Google and downloaded some HP tool for setting access rights and run it, but to no avail. I then downloaded from the HP site two sets of drivers, one full and one basic. They were packed into SFX archives. The full set led to the same error mesage appearing. I was able to install the basic set of drivers, but apparently it didn't include any software and I had no indication of successfully installing the scanner. I tried plugging it in, and the internal software of the OS kicked in, allowing me to scan an image at 200dpi or something like that, at a horrible level of quality. When I tried to increase the dpi to 4800, there was an error message, stating "not enough space", and at 2400dpi the entire application froze. At any rate, how can I install the drivers? What should I change, can I install it in parts via the rest of the files on the CD? Can I just install the correct .inf file and run the software from a separate installer?
    I have had an HP Deskjet 5100 a while ago, and I currently have an HP Laserjet 1010. I uninstalled the HP 5100 drivers and all the rest of its software, and rebooted, but to no avail, the error was still there. I remember that when I installed the HP Laserjet 1010, there was a different error about a .dll file missing, but I downloaded it off the web and the error disappeared. What to do now? Thanks in advance for any helpful responses.

    LOL. Thats not a 'problem'. This feature prevents the phone screen getting activated while accidentally pressing any other keys when the screen is locked other than lock and that red key.
    If you have locked your screen when phone call is being done, then you have to unlock the screen by pressing the unlock key otherwise in that case you will even not be able to terminate the call.

  • Dont work driver on Scanner ScanJet 300 on winows 7

    Please, create new drivers for Scanner ScanJet 300 on Windows 7 platform. I have this divace. Dont work it on Windows 7. Windows 7 and drivers of ScanJet 300 scanner are not complianted.

    Hi @Per-Morten 
    I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP Scanjet 5400c Scanner Drivers page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

  • Cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    Have you done any of the following?
    http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
    Repaired permissions & restarted your comp after the installations of the drivers?
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    What to do when you can't print
    =============
    not working with OS X yosemite 10.10.1
    Per your profile
    Mac OS X (10.7.3)
    Conflicting info:  Please update/correct your profile so that you can receive the correct troubleshooting suggestions.  This will assist the users in trying to help you.  Thank you.

  • When I downloaded the Mavericks Operating system to my MAC computer, the mac stopped recognizing my T4i camera.  How do I fix this.

    When I downloaded the Mavericks Operating system to my MAC computer, the mac stopped recognizing my T4i camera.  How do I fix this.

    Apple has an article stating that your camera's digital RAW format is supported. I don't know if that implies the camera too.
    http://support.apple.com/kb/ht5955
    The Canon website says the drivers are either already installed or you don't need them for Mavericks.
    They do have some updates for the Canon software.
    Some more details of, "stopped recognizing my T4i camera," might be helpful.
    If you are looking to transfer pictures/movies, can you just plug the card into the Mac or into a card reader?

  • HP SCANJET 300 WINDOWS 8.1 64BIT

    CIAO RAGAZZI, IL SOFTWARE SI INSTALLA PARZIALMENTE E LE ICONE DELLA COPIA E SCANSIONE MI DANNO COLLEGAMENTO MANCANTE... AIUTO...!!!
    PS INSTALLAZIONE DA CD E DA INTERNET HP - WINDOWS 8.1
    HELLO GUYS, THE SOFTWARE TO INSTALL IN PART AND ICONS OF COPYING AND SCANNING GIVE ME MISSING LINK ... ... HELP !!!
    PS INSTALLATION FROM CD AND INTERNET HP - WINDOWS 8.1 64BIT

    Hello Mercante,
    Google translate is not doing a good job translating Italian.
    Are you asking for the download link for the HP Scanjet 300 driver?
    If so, here is the link for the english version.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=dp-114102-3&cc=us&dlc=en&lc=en​...
    Does this help you?
    Ciao Mercante,
    Google translate non sta facendo un buon lavoro traduzione italiana.
    Stai chiedendo il link di download per il driver HP Scanjet 300?
    Se è così, ecco il link per la versione inglese.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=dp-114102-3&cc=us&dlc=en&lc=en​...
    Questo vi aiuta?

  • Error downloading Boot Camp Drivers.

    When I try to download Boot Camp drivers for Windows, a message pops out, saying something about an error with the apple servers. I tried to download the drivers (for Windows 8) manually from the Apple Page, but when i try to install it (in Windows), another error message pops out, saying that mi computer is not compatible with that. (Latest version)

    Purchase Snow Leopard install disk.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Info regarding Windows
    http://support.apple.com/kb/TS3648

  • Just upgraded to snow leopard, downloader apple support drivers for canon mp620.  Why won't a printer list display in add printer window?

    Just upgraded to snow leopard, downloader apple support drivers for canon mp620.  Why won't a printer list display in add printer window?

    Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • Why can't I download trial for Acrobat Pro on my Mac?

    Why can't I download trial for Acrobat Pro on my Mac?  I get an error message.  I click the download:  "Install Adobe Download Assistant", then click on it, see Adobe AIR application instaler, then get "Sorry, and error has occurred.  This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."   If I knew who the application author was, I'd contact him!  Thanks, Pete

    Hey PetaPete,
    There are some known issues when downloading Adobe Download Assistant which you can find at:
    Troubleshoot Adobe Download Assistant
    So, you might alternatively need to try downloading Acrobat from the link given below:
    http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
    Note:
    1) You need to stay on the Adobe trial page for the respective product that you're downloading. You should be signed in.
    2) Copy/ Paste trial link for the files that you're downloading from Prodesigntools on to the address bar of Adobe trial page and hit enter.
    Regards,
    Anubha

  • I have a seagate external hard drive with files copied from windows pc. If I will download NTFS driver from seagate to my mac, could I install it safely without harming my files in the external hard drive? I am afraid I may erase all files in there.

    I have a seagate external hard drive with files transferred from my windows pc. If I will download NTFS Driver from seagate to my mac, could I install it safely without harming my files? I am afraid.. I might erase all my important files during the installation..

    Thanks a lot! I have already downloaded Paragon Driver and it works well with seagate external hard drive. I am copying as of now my important files from my mac to it. However, I have only the trial version which will expire in 10 days. I don't have credit card to buy for it.

  • Do I need to install the drivers on my old Mac Pro disc or from my Snow Leopard disc?

    Hi,
    I've got a 2008 Mac Pro (dual quad @ 3GHz) w/ 24GB RAM and I've got Windows 7 Ultimate 64-bit installed. What do I need to install?
    On my newer 2009 iMac (which included Mac OS X 10.6) I just inserted that disc specific to the iMac and installed the drivers, but the disc for my Mac Pro is old (10.5.2) do I need to install the drivers on it or not? Can I just insert my Snow Leopard 10.6 disc to install Boot Camp etc., or won't that include drivers for the Mac Pro? The Mac Pro is running Snow Leopard 10.6.8.
    Thanks.

    Thanks for your reply,
    I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
    I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
    I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
    Thanks.

  • A collection of FLV downloader, FLV player, and FLV converter for Mac

    [http://www.pavtube.com/christmas2009/]
    A collection of FLV downloader, FLV player, and FLV converter for Mac
    Are you prepared to download FLV videos from YouTube, Google Video, metacafe, Yahoo! Video, Reuters.com, and many other video websites to play on your Mac or portable players, or do some further editing with certain editors? In my experience, assuming you have this idea, you must take advantage of three kinds of tools, including FLV downloader, FLV player, and FLV converter to achieve the goal.
    Of course, I am not speaking this to depress you, but to share my collections of these tools to show my kindness. Sure, just for people who have these needs.
    At first, I’ll introduce you several FLV downloaders for Mac, I have tried all of them, and basically they can achieve my goal of downloading FLV videos online.
    Free FLV downloaders for Mac:
    Web Video Downloader for Firefox
    Free Video Downloader for Mac
    Free YouTube Downloader for Mac
    I also know some free FLV players, and recommend them to you here, hope they can assist you to play FLV videos on your Mac smoothly.
    Free FLV player, Mac OS X:
    Adobe Media Player
    Wimpy FLV Player
    QuickTime, after installation of the Perian video plugin
    SWF & FLV Player
    CorePlayer
    (Tip: the above pieces of software can easily be searched in Google, so I do not give you the links here. I’m sure you can get them with ease.)
    Well, we have gone through the FLV downloaders and FLV players in the above passages, now it’s time to introduce you a FLV converter for Mac. This program I recommend is Pavtube FLV Converter for Mac, which can perfectly convert FLV videos to a wide range of video formats, so that you can do whatever you like with the resulted videos, such as playing on your iPod, iPhone, BlackBerry, PSP, Apple TV, etc. or exporting to iMovie, Final Cut Pro and Final Cut Express to do further editing, or doing something else as you like. But how to use it? You may ask me. Take it easy, a step-by-step instruction is involved in the following part.
    1. Download, install and run this program
    A sky-blue interface will be shown to you as follow:
    2. Add files, set output format and destination folder
    Input FLV files to it by clicking button “Add”, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press “Browse” to specify the destination folder or just use the path set by default.
    3. Set advanced settings
    Click button[b] “Settings”, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. to optimize the output videos.
    4. Convert
    This FLV Converter for mac can definitely complete the conversion at a swift speed with excellent quality, also it do not have the problem of audio-video out of sync. Therefore you need not worry about these issues. Moreover, if you want to add watermark as your own logo or reserve your copyright, you can totally do it with this program.
    Ok, the introduction to the three kinds of tools which you may need while dealing with FLV videos is over, sincerely hope they can deliver you useful information, because you know, it’s my original intention.

    Hi Greg,
    So if I understand correctly, your findings are:
    Flash Player 10.1.85.3 + Flash Media Interactive Server = Jerky Video
    Flash Player 10.0.x.x + Flash Media Interactive Server = Smooth Video
    Flash Player 10.1.85.3 + Wowza = Smooth Video
    And what about Flash Player 10.0.x.x + Wowza?
    Also, if you could check the network traffic to confirm if it's Flash Player causing the issue or it is receiving it like that from FMIS.
    Cheers
    --Vikas

  • In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo.  At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

    In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

    HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
    i tried to sort it out  by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
    i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
    WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
    I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

Maybe you are looking for