Download shockwave and run as script

i work in an organization where users have low privliges and
they can't install shokwave, i can't install it manually because
there is more than 100 users.
the best solution is to run the installation as script.
where can i download the newest version of shockwave?

Can you tell me how I "run the installation as script?"
You can download Shockwave 11 at:
http://www.adobe.com/downloads/?ogn=EN_US-gntray_dl_downloads
You'll see it in the upper right corner of the page.
Good luck,
Larry

Similar Messages

OBIEE 11g write back to Essbase and run calc script feature

Hi,
I have a requirement to write back into Essbase Cube and run calc script from OBIEE dashboard.
From what i have search on google, we must deploy additional Java Script into weblogic, but that is before OBIEE 11.1.1.6.
I have 2 question:
- Does OBIEE 11.1.1.6 already supported native write-back to Essbase and running calcscript?
- Anyone has example of the custom java-script for write back and running calcscript?
And another, if there are requirement like this, is it better to install Essbase Add-in on Microsoft Excel and do the what-if analysis there, then just display the report on OBIEE dashboard? (based on user-friendliness and the complexity on maintenance)
Thanks in advance.

Hi,
Even I am trying to achieve the same thing as you have mentioned but think that it is not possible to achieve easily in obiee 11.1.1.6, though we do have a work around to perform a writeback in Essbase cube using JAPI as mentioned below.
Also we can call Hyperion reports from OBIEE using Action Links and also pass parameters to the same but dont know if it runs calculation script.
Below link could be useful for you for write back workaround.
http://oraclebizint.wordpress.com/2009/05/25/oracle-bi-ee-10-1-3-4-1-writebacks-to-essbase-using-japi-and-custom-html-part-1/
Let me know in case you have found out anything else related to same.
Thanks,

Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

Yes. You can define alternate locations in teh application manager. just be aware that some components will always end up on your system root drive no matter what.
Mylenium

If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")

If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")

I have a couple or dozen or so excel spread shheets that I use origionally created in M/s Excel v.5.0 ( yup some time ago although have run and updated them on office 2007 perfectly etc. AND numerous word files that I refer to. I have also run these files using Open Office on a small 13" mac Book Pro. successfully.
I have now decided to change my personal use computers > macs.
Ok, so in summary then i think you kind guys are saying:
(1) That if i buy Pages & Numbers or even iworks which is Apple's suite of such programs i believe, then I can download and Run these apps /programs on each my personal mac computers whether they be my second hand Imac or second hand 17" mac book pro. ( basically i have purchased these so that I am converting to the "Apple Side" and can use the Imac desktop while at home and Mac book pro when out and about) , under the one purchase and one licence.
(2) The decision as to whether to Buy M/s Office for Mac v Pages & Numbers or the iworks suite is that if I have lots of MACROs in my existing files written in M/soft that it would be better to go for M/s Office for Mac. I understand that Macros are the automated thingys ?? I have formulae obviously inthe fairly simple spread sheets but not aware of any macros. So I guess that means ~ I could purchase either product by the sounds of it. yes? Are there any other obvious things i need to consider?
Other INFO:
Also, I have snow leopard on one system and Maveric ( pretty impresive!) on the other. i am slightly reluctant to upgrade the snow leopard o/s as I would have to upgrade the paralles software and probably Windows software as well in order to run an old Kitchen, drawing program that I use occaisionally. I know that one should be able to partition / and Boot camp but I really don't want to do that. I feel at this stage its not worth payingtoi up grade all these bits of software for something I rarely use. But I am open to anyones comments / views.
Thanks.

I uninstalled firefox a few weeks ago and now want to reinstall it. When I install it it downloads fine and runs, it extracts up to 100% then othing happends so it doesn't install.

I uninstalled firefox a few weeks ago and now want to reinstall it. When I install it it downloads fine and runs, it extracts up to 100% then othing happends so it doesn't install.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading and installing work.

Preload and run js script

Hi
Hope someone have A clue how to get there: We work on Edge and sometimes deals with Arabic and Hebrew projects. What we want is to run A script (javascript?) with the RTL direction tag. We thought to load the script thru the "script panel". Thanks for help

Well could you add this to your composition?
add a class to all your text fields and it should work.
sym.$('textname').addClass('newDirection');
sym.$('.newdirection').css({'direction':'rtl'});
note that the class name has a dot before it.
You can also add the class in the UI to your text fields.

Automator and "Run Shell Script" error

First, if I'm in the wrong place with this- sorry. Figured this was an OS kind-of thing.
I recently migrated to a new iMac ... I brought along an Automator script; I've been using it for years to perform a little rsync backup to an USB HDD. It's 'never' given me any problems ... until now!
"*Run Shell Script*" encountered an error .. but alas, the system log is devoid of messages ... and the verbose log I have running indicates that all the files are copied/backed-up ... I would love any input on this that might help me get back on the feet. .....
*Here's what my Shell Script Looks like:*
Shell Option: /bin/bash
Pass Input: to stdin
rm -dfr '/Volumes/Backup HD/*********'
rm -dfr '/Users/***********/Library/Logs/Profile_Backup.log'
rsync -rltv /Users/******** '/Volumes/Backup HD/' > /Users/*******/Library/Logs/Profile_Backup.log
(I'm sure there's way to only sync the changed stuff between backups ... but I've simply preferred the fresh copy approach).
*I do however note this in my logs when I open Automator:*
12/14/10 3:15:46 PM [0x0-0x42042].com.apple.automator.Backup[464] Application Stub: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.

@Tony T1
Thanks, I'll certainly adjust the log file as suggested
In troubleshooting the problem I went the terminal route - and issued each command ... during the rsync process I was getting an error ... turns out when it was syncing the SyncServices folder it was encountering a copy of the keychain ... which had root permissions - naturally rsync was not able to copy the file (personally I have no idea why the keychain would be being sync'd with anything)!
I removed the file from the sync ... I'm still doing some "debugging" to correct the problem-
Again, thanks for the assist!

Send to VRU and Run Ext Script

Hi All;
I am adding a new vxml browsers and I need to send some calls (based on If statement) to those vxml browsers, so I added a Network VRU (with a new labels) and I added Network VRU script and at the ICM script, I placed if statement and based on it I am using Run Ext script which use the required Network VRU Script. But the problem I am facing it, that still the returned label for the CVP is the same label that is used with the original VXML browsers ! How I can resolve it.
I tried to set the default network vru (at the PG configuration) to be this new Network VRU, but still it is returning the original label that is used to send to the original VXML browsers.
How I can resolve this label issue and let the returned label to be 8333333333 instead of 8111111111 (ofcourse this in case the Run Ext Script was calling the new Network VRU Script, but if the Run Ext Script was the current Network VRU, then to return the label 8111111111)? How to do this
Kindly give a look for the pictures of the configuration and some logs that help.
Regards
Bilal

Hey Bilal,
Ok, it's actually quite difficult to single out a gateway or a couple of gateways on a per-call basis 'the right way'. Once you add a gateway to your Gatekeeper, SIP Proxy or Static Routes setup, you'll have a round robin mechanism that's pretty much not changeable on a per-call basis.
If it's just to test these gateways for a limited period of time, try this :
Open Configuration Manager - ICM Instance Explorer;
For your Instance you should have one Customer Definition with the same name, add a second Customer Definition, i.e. 'Test';
Now go to the Next VRU Explorer, add a new Type 10 VRU, and give it a (slightly) different label from the normal one, define the Customer as 'Test';
Go back to the Customer Definition and assign your new VRU to that Customer Definition;
Create a new test Dialed Number for your existing Routing Client and be sure to pick your 'Test' customer, continue to create a Call Type, Script and Network VRU Scripts as you always would;
Route the new Label only to your new gateways.
You would remove all of this configuration and make the new gateways use the same labels as the others once you are ready to put this in production, But it will at least allow you to route some calls through them.
Note: you may be able to do all the same things but using your existing Network VRU, just adding a new label to it for your newly defined Customer Definition. I'm not sure if ICM will pay attention to the Customer when picking a label for a Network VRU.
Cheers,
Kris

Loading and running consecutive scripts in LabVIEW

Hello,
I'd like to start this by saying that I'm very new to LabVIEW so I apologize for any questions that should seem obvious. Also, when replying please remember I'm not as familiar as I would like to be with LabVIEW in general. I have recently had a problem put on my desk to add some functionality to a preexiting, fairly complex VI. The solution seems to be in scripting. However, loading a script longer than 55 lines gives an error (Is this normal? Is there a way around it?). The problem is pretty easy to break up into small parts, so the script has been broken up into multiple smaller parts that provide the same function when ran consecutively. After executing each script, the system will take some time to process (up to 300ms, IIRC) and will assert a ready bit when complete. Using that ready signal as a trigger, I would like to execute the next script.
The scripts are being read correctly into the program using "niHSDIO Write Script.vi", and can be selected by hard-coding the 'script name' into "niHSDIO Configure Script To Generate.vi". It will successfully execute any of the scripts when hard-coded, but when trying to call the next script (script names stored in an array, and incremented with a while loop) an error is given:
Error - 1074118651 occurred at niHSDIO Write
Script.vi
Possible reason(s):
Driver Status: (Hex 0xBFFA4005) You cannot perform this
action while the session is in the running state.
At this point, I've read quite a bit online and in the documentation about trying to find a way to suspend, pause, etc. the state to allow another script to load, but I haven't been able to figure it out.
On the other hand, if there is a way to load a script of arbitary length, I believe that will resolve my problem as well. Please let me know what additional information may be needed to help solve this, as I'm sure I've left out all the good bits.
Thank you in advance,
Landon
Edited for clarity.

Good morning Jonathan,
Thank you for your reply. I apologize for the delay in my response. Allow me to back up a little and give you some more information on the script.
The error is as follows:
Error - 1074116601 occurred at niHSDIO Write
Script.vi
Possible reason(s):
Driver Status: (Hex 0xBFFA4807) Too many compiled
instructions in loop. "Generate" and "Wait"
instructions each result in at least one compiled
instruction. Each marker adds an additional compiled
instruction. Clear instruction does not result in a
compiled instruction.
If possible, reduce the number of generate instructions
by concatenating the waveforms on two or more
consecutive generate instructions.
Line Number: 2
Position in Line: 1
Number of Instructions: 2048
Maximum Number of Instructions: 55
Status Code: -201016
I have a waveform that is 524292 cycles long and I want to run 384 cycles, wait for an external trigger, run another 384 cycles beginning at a new position, wait for the same external trigger, and loop that 1024 times. I thought scripting would work, but if there’s a better way please suggest it! I’m using a PXI-6551 with 64Mb/chan RAM in a PXIe 1062Q chassis with a PXIe-8370 controller cabled to a desktop Windows 7 box.
As previously mentioned, the smaller scripts function correctly when split into sections of less than 55 lines. See below for an example functioning script.
Clear scriptTrigger0
Generate mywfm subset(0,384)
Wait until scriptTrigger0
Clear scriptTrigger0
Generate mywfm subset(512,384)
Wait until scriptTrigger0
Clear scriptTrigger0
Generate mywfm subset(1024,384)
Wait until scriptTrigger0
Clear scriptTrigger0
Generate mywfm subset(1536,384)
Wait until scriptTrigger0
Clear scriptTrigger0
Generate mywfm subset(2048,384)
Wait until scriptTrigger0
Clear scriptTrigger0
Generate mywfm subset(519168,384)
Wait until scriptTrigger0
Clear scriptTrigger0
Generate mywfm subset(519680,384)
However, when the full script (attached in text file) is entered, the error is generated.
Thank you again for your time. Please let me know any additional information you may need.
Landon

Can anyone please tell me which version of Photoshop Elements will download easily and run with mac 10.5.8 Snow Leopard?

I posted a question which was: Can anyone please tell me which version of Photoshop Elements will work with Mac 10.6.8 Snow Leopard. Then this window popped up saying mark this discussion with as a question and this window. I have no idea how this works. It already is a question and if I need to emphasize that, how does this window that looks like a Word editing window, help me do that?Downloading, Installing, Setting Up

You asked the question in the title area instead of the area where the body of your posting is intended to be. No fault of yours - they need to make the form clearer.
Check the system requirements for the various versions of Photoshop Elements and see which suits your system. Adobe only sells the most recent versions of their software, so if you need an older version you will need to find a vendor for it.
System requirements | Adobe Photoshop Elements

I have tried download/installing and running the most current add-in for connect in my outlook.

Is there a special way to install this add in?

I downloaded it from the adobe.com website- under Resources- dowloads and updates- additional downloads-I then clicked on the Microsft Outlook [32 bit Windows] www.adobe.com/support/connect/downloads-updates.html#additional-downloads
I did have another add-in that had downloaded about a week prior to this one which did the same thing this one was doing except for the first one didn't make my whole desktop freeze up I would just get constant notificatioin boxes popping up telling me there was some error with adobe meeting of some sort. I just want to be able to schedule an adobe connect meeting via outlook instead of having it sent to me first and then having to turn around and have to download it to any other sites that may be having the same issues.I wish I would have taken pics of the error boxes but unfortuanly I didn't. I did exactly what the guide said to do for installation-

Get input from user and create a file and run a script in command line.

Hi all,
i'm trying to get a input from user and write it into a file named alpe.jacl
To get multiple userinputs like address and jobtitle etc etc in the same single window.
and the code will save the inputs in alpe.jacl one by one in a new line like
nameis name
address russia
jobtitle dev
So i coded like below.
Though GUI for user input looks dull Its working fine.
Now I want this code to perform one more task which is the GUI will contain one more button INSTALL with OK and CALCEL .
and when after putting all inputs and creating the alpe.jacl file if someone clicks INSTALL it should start ./install.sh script present at the same folder which contains some unix shell commands.
Here am not able to figure out how to go further...
One more thing after all the inputs given when I am clicking on the OK button its closing the window instantly which i dont want. I want it like it should wait till someone press CANCEL to exit.
Please some one help me.
import javax.swing.*;
import java.io.*;
public class file
public static void main(String []args)throws IOException
FileWriter ryt=new FileWriter("alpe.jacl");
BufferedWriter out=new BufferedWriter(ryt);
JTextField wsName = new JTextField();
JTextField sName = new JTextField();
JTextField cName = new JTextField();
Object[] message = {    "Web Server Name:", wsName,"Server Name:", sName,"Cluster Name:", cName};
int answer = JOptionPane.showConfirmDialog(    null, message, "Enter values", JOptionPane.OK_CANCEL_OPTION);
if (answer == JOptionPane.OK_OPTION){    String webserver = wsName.getText();
String server = sName.getText();
String cluster = cName.getText();
out.write("set webservername " +wsName.getText()+"\n");
out.write("set ClusterName " +cName.getText()+"\n");
out.write("set ServerName " +sName.getText()+"\n");
out.close();
}}Thanks,
Ricky

Thanks a lot.
Is there any way through which i can assign a scroll bar to my panel.
As when the number of user inputs grows the GUI becomes more bulky and some of the fields are not showing up.
Cheers
_Ricky

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Error message when running MultiPageImporter script

Hello,
I had posted this in the Adobe forum, and it was suggested I move it over here.
I have a 300+ page document - original is 8.5x5.5.
I want to print it on 8.5x11 sheets - landscape - so two pages are on each sheet.
BUT - I want to have my two copies printed - and then cut the pages in half to end up with two full books...
So if I print two copies, I need page 1 and page 1 on the same side on the same page - page 2 twice on the back...
I was directed to a script download:
Actually an InDesign script makes it possible.
Create a new 8.5 x 11 document.
Install this script
http://indesignsecrets.com/downloads/MultiPageImporter2_5.zip
Run the script twice, changing the x offset 5.5 inches (relative to top left) for the second run.
I have downloaded the script and am trying to run it in InDesign CS6.
I get this error when I run:
Any suggestions as to how I can make this work?
Thanks !
Amber

Here is another way to do this, in case someone is interested: Open your PDF in Acrobat and go to tools> Pages> Extract pages as separate files. Put these pages in a folder and duplicate it. Open the duplicate folder, select all files and do a batch re-name, adding "a" at the end of the name (before the extension.pdf). I use the Mac plug-in "Path finder" for this, but I think you can also do it in Bridge, Grep, and probably other programs. Move the re-named files into the folder with your original extracted PDFs. When viewed by name, the file order should be 1,1a 2,2a 3,3a and so on. Open the last page in Acrobat and go to File> Tools> Insert from file> Shift select all of the pages (except the one you have open) and insert. I'm not sure why, but the pages will be added in reverse order. Save your new PDF. Make a one page InDesign file at 5.5x8.5 (facing pages) and use the Place multipage PDF script to add your PDF. Export to spread pages. If you don't want to print in reverse order, I think most printers have a reverse order option, there are also scripts available to reverse the order of PDFs, or you can use this web too:
Reverse PDF Page Order

Run FX script in JavaME emulator?

According to Readme of JavaFX1.0 Mobile Beta, *.fx script files have to be packaged into dedecated JAD/JAD by javafxpackager, it seems no way to dynamically download *.fx and run on JavaME. Is it possible to be implemented download&run *.fx script in future release? And if MIDP security policies will be applied to FX script?

As of JavaFX 1.0 all .fx code is compiled. Interpreted execution of .fx files was a proof-of-concept and is no longer supported. On mobile devices it is unlikely that you'll want to run an FX Script compiler so all .fx code would have to be compiled on the server before download into the device.
To support your use case you really want a services-oriented infrastructure that can download and execute multiple FX Mobile applications dynamically and have them controlled by some master service. This gives you much more flexibility, reliability, and performance than interpreting snippets of .fx code in a small framework (much like widget frameworks do).
-- Terrence

Download shockwave and run as script

Similar Messages

Maybe you are looking for