Download speeds, 600kb/s via speedtester, but only...

Hi all,
Does anyone know why Im getting download speeds of around 600kb/s via speedtesters and the Binary newsgroups, but via hotfile, megaupload and rapidshare (have premium accounts for all) i'm only getting 30kb/s ???
Im baffled completely !!
Are BT throttling these sites ??
Thanks
Dave

Dave,
The BT speedtester runs completly different to file sharing sites. When you test with the BT Speedtester, your connection isn't going out to the internet. From what I gather, It goes from your Computer, through the exchange and then straight to the BT Speedtester servers (without going out to the internet). By doing this it bypasses any of the traffic going out to the internet and doesn't get affected by the national contention ratios which is important for an accurate test. This is probably why you are only getting 30kb/s on external file sharing sites. I suggest you try and use the Thinkbroadband speedtest here: http://www.thinkbroadband.com/speedtest.html to see if it is a problem with either the contention or something else.
Good luck
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

Similar Messages

  • All my iCloud photos are downloading to one of my computers, but only the last month's worth to another.  How can I get them all to download to both computers?

    All my iCloud photos are downloading to one of my computers, but only the last month's worth to another.  How can I get them all to download to both computers?

    When you on photo stream you will only get photos from the last 30 days (plus future photos added to your stream).  That's because they only remain in iCloud for 30 days.
    To get the old photos on your computer, import them using your usb cable, as explained here: iOS: Import personal photos and videos from iOS devices to your computer.

  • Download speed slow on Mac Pro but fast on MacBook Pro

    I have an early 2008 8-core Mac pro, 6 GB RAM, running 10.6.8. I'm connected via ethernet to the HITRON CGN3 modem/WiFi router from Rogers. I'm only getting about 20Mbps download, and 10 Mbps upload. However, when I connect my 13" 2011 MacBook Pro (8 GB RAM) to the modem, also running 10.6.8 and using ethernet into the same port, I get about 80Mbps download and 10 Mbps upload. Even using WiFi, my MacBook Pro is able to get about 80Mbps download.
    My network settings are the same in both my Mac Pro and my MacBook Pro. I should be getting around 60-80Mbps download on my internet plan, but my Mac Pro is underperforming.
    Anyone know the solution, or have experienced a similar issue?
    Thanks in advance.

    Grant, you sir are a mega genius.
    The culprit was the ethernet cable. I plugged the cable I was using for the Mac Pro into my MacBook and experienced a drop in download speed. Upon inspection, the cable had 6 wires. Who knew? This cable worked with my previous modem, and my speeds were pretty good. I just upgraded my internet package, and got this new modem, so I guess the cable is no longer incompatible.
    Now that I've replaced the ethernet cable to my Mac Pro, my download speeds are smokin'.
    Thanks, man, you saved the day!

  • I don't know why I can't download apps in apps  through wifi but only can download apps in the computer??

    I don't know why I can't download apps in apps store through wifi but only can download apps in the computer??

    See these previous discussions:
    Downloading apps stuck on waiting...: Apple Support Communities
    Waiting applications: Apple Support Communities

  • Checked download speed on 'speakeasy', over 5mbs, but site open too slow

    certain web sites like WGT.com open very slow, even when my download speed is at 5mb/s or faster. Why is this?

    Paul,
    can you carry out a speed test and post the result please?
    http://bt.custhelp.com/app/answers/detail/a_id/935​4/~/how-can-i-test-my-broadband-speed%3F
    iechyd da
    sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

  • NO Photos load via FACEBOOK but only on THIS computer. HELP!

    While using Firefox, Facebook will not load any photos (via Photo Albums) which is very frustrating because I like to keep up with my friends and family. This issue is only happening on this one computer, my boyfriend's laptop is fine and my sister's computer has no problem either. IE does not load on this computer (it is a family computer) so I'm a bit stuck!

    With Facebook on display, click on the site identity button (for details on what that is see [https://support.mozilla.com/kb/Site+Identity+Button]) and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see https://support.mozilla.com/kb/Images+or+animations+do+not+show
    Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

  • Downloaded/installed PS CS6 via CCM but got installed in Italian instead of English

    i just download photoshop cs6 but i dont know why its downloaded in italian language i need the english language how can change language?

    yes i buy the english vers
    why when i open photshop told me that its 30 days proof?
    i buy for 1 year.... thx
    Il giorno 14/mag/2012, alle ore 15:41, Manish Kumar ha scritto:
    Re: change language
    created by Manish Kumar in Adobe Creative Cloud - View the full discussion
    You can adjust the Adobe Application Manager setting by clicking on your Name in the top left hand corner and choosing Preferences.
    By default AAM is detecting the language used by your Operating System which is why this additional configuration option is necessary if you purchased the English only version of Creative Cloud.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4406693#4406693
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4406693#4406693. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Apple tv connected to yamaha receiver via hdmi, but only plays in stereo

    I have connected my new apple tv 2 to my yamaha receiver, but it is only playing hd content in stereo.  I am using the same hdmi cable that I had previously used on a PS3, so I know that it is capable of receiving 5.1 content.  I have tried streaming hd content from Netflix as well as hd videos from apple tv, but both are still just playing audio in stereo format.  I have played with all the settings on the apple tv, but nothing is working.  Any ideas?

    I'm pretty sure that the content is 5.1 as I have tried various HD programming streamed from my iPad, on Apple TV, and HD shows streamed from Netflix.  I have tried the Dolby Digital setting in both "Auto" and "On" settings and neither appears to work.  I would assume that HD content would play in 5.1?

  • I would like to download Dragon Dictation in Ireland region but only appears to be available in US region?

    When will Dragon Dictation be available in Ireland Region, only available in USA region at moment?

    Just send yourself the link to your iPad and open it. it will open iTunes and display the App. It did for me.
    The search unfortunately does not bring it up.
    Alternatively you can download it to your computer you use to sync the iPad with, using iTunes and then sync it over.

  • I can download a purchased album via purchases but I look at it in the store and it wants me to buy it?

    The original is DRM and I read that you just delete the DRM one and redownload to get DRM free... But it just keeps telling me to buy it!
    I already bought it... I don't want to buy again!

    Ultra Blue wrote:
    No more money for Apple from me then. That is a disgrace.
    Ultra Blue,
    The problem is that you asked the question way too late.  Here is the answer, as was posted here in 2007:
    Re: NEED TO FORMAT SONGS IN MP3, ITUNES SAYS WON'T CHANGE "PROTECTED FILES"

  • Using Speedtest, all my iOS 7.1 devices are showing slow internet download speeds on my home WiFi network.

    I have four iOS devices, an iPad Air, an iPhone 5S, an iPhone 4, and an iPad2.  All but the iPad2 are running iOS 7.1.  The iPad2 is still iOS 7.0.4.  I am only getting 1mbs download speeds with the iOS 7.1 devices.  The iPad2, as well as my Windows 7 laptop on the same WiFi network, are getting a full 15mbs download speed using the Ookla Speedtest.  I have tried resetting the wireless router, as well as resetting the network configurations on the iOS devices, rebooting the devices, etc., but the slow speeds persist.  While I can't definitively tie the issue to the iOS 7.1 upgrade, I distinctly recall running speedtests on the iPad Air in the past, and getting 15mbs.
    Any troubleshooting suggestions?

    Thanks for the reply, Jim.  I double-checked my wireless router settings against the recommendations in the link you provided.  Only one setting was different.  I had the 2.4GHz channel width set to auto, and the recommendation is 20MHz.  I made this change.  The 5GHz channel is disabled on my router.
    After the change, I got mixed results.  My iPhone 5S now gets over 15Mbs, but my iPad Air gets less than 1Mbs.  My iPad2, as well as my laptop, continue to get over 15Mbs.  I don't think the issue is with the router configuration at this time.  Any other suggestions?

  • G580 - pathetic download speed & wifi connectivity

    I had purchased G580 laptop in October & upgraded to windows 8. Since then, the wifi problem has been regular. After   updating the drivers the wifi is mostly. Once in a while I have to restart the router..  That's still OK, but the download speed is really pathetic.
    I have another old Acer Laptop with windows 8 (upgraded) too. I have an 8 MBPS broadband connection. The Acer laptop has 1 Mbps download speed without any hindrance. But, the Lenovo G580 is giving 250kbps downloads, that too with regular stoppages. Another big issue - while.. this dead slow download happens, not even a single webpage opens.. Regular "error loading" messages.
    Kindly help in rectifying the issue as I have updated all the drivers through windows update as well as lenovo site.
    I'm using a bitdefender antivirus, will that have any problem with wifi speed ??
    Kindly advice as the only other option is to discard the laptop.
    thx
    Satish

    hi satishrk1978,
    If you have the Atheros AR9285 Wireless Adapter, you can try to:
    1. Update your wireless card driver to v10.0.0.221, get it here, otherwise skip this step.
    2. Depending on your brand of router (and if applicable), make sure you disable WMM QoS (Wireless Multimedia) and WPS (Wi-Fi Protected Setup)
    3. Use a WPA2-PSK TKIP or AES encryption.
    4. If you have a dual band router (2.4Ghz and 5Ghz), try to use only the 2.4Ghz band.
    5. Temporarily disable any running firewall / antivirus software.
    5. After applying steps 1-5, try running a speedtest again via www.speedtest.net.
    Let me know the result.
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Q180 Slow Download Speeds

    Just got my Q180 setup last night. It is connected to my Wireless N network. Noticed that while watching YouTube videos is was running out of buffer frequently. Decided to run a speed test on www.speedtest.net. Results show .65mb down speed and 6.5 mb up speed. My service should be 20mb down and 10mb up. So the up speed seems accurate, but the download speed is TERRIBLE, it's running at about 2% what it should be. I ran the same speed test using my laptop, from the same location and achieved 18mbps down and 6.5 up.
    Is this a limitation of the Q180, or is there something wrong or a setting that I have to set to fix this issue? Honestly this thing is pretty much useless to me without a better download speed, after all, just about the only reason I got this was to do internet stuff on my livingroom TV.
    Thanks,
    Josh
    Solved!
    Go to Solution.

    Unfortunately, I still have the same problem with this computer. I get very slow wireless connection speeds. I've tried 3 different wireless routers. I've moved it around. I've updated the wireless driver. Still get an average of 1-2mbps download speed and .5mbps upload speed on a 20down/10up connection. Each time I think the problem is resovled, the next time I use the computer, it's back again. The thing is pretty useless. I've never been able to turn it on and just go watch a video on YouTube on my TV, which was more or less the only reason I bought this thing, so it was a waste of money. And no help comes from the forums apparently either.

  • Yosemite Drops WiFi Download Speed 25%

    I really had no problems with Yosemite on my late-2013 MBP Retina...until I did a Speedtest.net test of my Internet speed, in this case over a wi-fi connection to my router.
    I routinely get 55-60 Mbit/sec download speeds, but with Yosemite I got only 40-45 Mbit/sec, roughly a 25% reduction. In case it was just a slowdown from my ISP, I checked using wired Ethernet, which showed my usual 55-60 Mbit/sec throughput. Toggling immediately back to wi-fi, the speed went back down to the 40-45 Mbit/range.
    I saw others with wi-fi issues under Yosemite and tried the proposed solutions that some said fixed the wi-fi speed (and wi-fi drops) problems--turn off Bluetooth for one. Nothing helped. So I restored the Time Machine backup of my Mavericks installation and...everything wifi-related is back to normal. Same network speeds as before Yosemite.
    Lesson learned--always do a full backup before a major OS upgrade just in case.

    Vano3408 wrote:
    Having issue on my D6633 since KitKat, now updated to LP 5.0.2 23.1.1.E.0.1 and still same. When I go in 5 meters from router behind 2 walls and signal strength decrease a bit download speed drops almost to Zero, but upload speed is ok.
    Please check below video, I have 46080 / 3072 kbps for download /upload... Tried all possible settings combinations without success. Stamina mode never used..
    http://1drv.ms/1DjjkcP
    When near router 2-3 m without any obstacles download speed is ok.
    Any other my phone (Samsunf S3 for ex.) have no such issue in same location...
    Please advise what can cause such issue or it is my Sony hardware specific issue ? How can I solve it ? 
    This issue is not router specific, because same behavior at home and at work.
    just in case following settings I have at home: router in mixed mode, 20/40MHz auto, WMM enabled
    Download this and take a look which channel of your router had the best signal and make changes on your router to the best channel within 1-11. Try your speed test again to see if this helps.
    https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer&hl=en
    You may also want to ensure that no body is downloading or torrent if your home network is shared with other users.
    I can accept failure.... I can't accept not trying - Michael Jordan

  • IPad (gen 3) wifi download speeds

    I recently upgraded my Comcast Internet to 50Mbps download speeds.  Using the Speedtest.app I am showing around 30 Mbps on both my iPad (gen 3) and iPhone 4s.  I was wondering if anyone has been able to achieve faster download speeds than that on an iPad/iPhone. 
    I was hoping that it would be faster considering my three year old Mac gets 55 Mpbs when connected via ethernet to the internet and that same Mac using wireless (in same room as wireless router and iPad/iPhone) gets over 50Mbps.
    Thanks for sharing.
    p.s. I am using an Airport Extreme AC wireless router

    From what you've told us, the iPad should see the printer.  No, you do not need any additional software on your iPad.  You just need to be sure the HP drivers are current.
    Here's an article that might help:
    AirPrint basics

Maybe you are looking for

  • Error While Approving REQ

    Hello Team, user is trying to approve the requisition and getting an erro "APP=PA-19268 a task level expenditure transaction control has been violated" when saving the project details in requisition details. What could be the problem User is using Pr

  • Win 2102: existing number of virtual desktops is not valid after errors while deleting , how to fix it ?

    Hello everyone, I created a virtual desktop collection with a name format like this , prefix = VDI-, suffix= 1 . so when I created the first VMs , I had VDI-1 and VDI-2 , later after recreating the VMs, adding new ones and deleting others, the suffix

  • I can't import from Itunes into FCP HD

    got the capture done with bears hand NOW i can't get audio tune from Itunes to import it says can't recognize file or something like that. I have a powerbook G4 10.4.9 FCP HD 4.5 is this another case of the 10.4.9 and 4.5 being incompatable (the reas

  • Migration from 10g to 12c using data pump

    hi there, while I've used data pump at the schema level before, I'm rather new at full database imports. we are attempting a full database migration from 10.2.0.4 to 12c using the full database data pump method over db link. the DBA has advised that

  • Business Package - Hierarchy pop up permissions

    Hi, I am using item details iview of standrad business package in portal to create/edit master record. When user with System Administrator role try to create/edit a master record, the pop up for selecting hierarchy field value displays the hierarchy