Download speeds are very slow but speed test is fi...

Hi, I did a speed test which returned a result of 36mb down and 8mb up so didn't really expect a slow download. I started a download on the iplayer which normally downloads at 28-30mb per second but it didn't get above 4mb which is not good.
Anyone experiencing slow download speeds?

Speeds have gone back up to 21mb on the iplayer. Much better but still slower than usual.
When you get used to the fast speeds of Infinity, anything slower is immediately frustrating. Like having to go back to using my Pentium 75Mhz with windows 95.......horror

Similar Messages

Deployment and Upload speed are very slow in Southeast Asia,

Normally I have spent the time to deployment not over 20 minutes per cloud service but in this week I have spent the time more than 1 hour per cloud service.
I have test the upload speed in Asia Pacific. It was very slow.
http://www.azurespeed.com/Azure/Upload
Asia Pacific
East Asia
Hong Kong
36.48 KB/s
Asia Pacific
Southeast Asia
Singapore
29.72 KB/s
Could you help to urgently check what is happen?

Hi,
There is no Report of any Outage or Downtime with any of the Azure Services.
Can you please confirm if you are still facing slow Speeds, it could also be a local network issue.
Hopefully you are not facing the issue anymore, IF you are still facing issues, I would recommend you create a support ticket if its affecting you production.
You can create a support ticket here:
http://azure.microsoft.com/en-in/support/options/
Regards,
Nithin Rathnakar

My speeds are very slow.

reporting 10.69 mbps with extreme 105 connected directly to the router. Please help!

Start by reviewing the troubleshooting tips at this sticky and post the downstream power levels, downstream SNR and upstream power levels on all channels.
http://forums.xfinity.com/t5/Basic-Internet-Connectivity-And/Connection-Troubleshooting-Tips/m-p/1253575#U1253575

Very slow copy speeds from my USB thumb drive. Why?

I have an 8GB USB thumb drive. When I copy files to/from it to my Mac Pro (Early 2008 2.8Ghz), the transfer speeds are very slow. But when I use it with my 2009 Macbook, the speeds are fast. Why would it work faster with a low end Macbook than with a Mac Pro? I'm using one of the USB ports on the front of the Mac Pro.

Anyone have an idea?

Firefox responds generally very slow but fast when moving the mouse

Firefox respons very slow but speeds up when I move the mouse over the page. Keeping the mouse moving results in normal speed.
?? Peter

Weird thing is that if I revert back to FF15, everything works with HA enabled and full bookmark menu.
but its a no go with FF16
PEACE

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and now seem to have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

Try my Mac Performance Guide.
If that doesn't help, post back here with the results of all the things you tried to do as part of that guide.

Very slow broadband speeds

Hello
My first post, and I'm hoping that someone will be able to help me with this.
For a few days now, I've been experiencing very slow broadband speeds (100kbps or less), in contrast to the 1.5 - 2Mbps that I would usually expect to get. I've been on hold to BT technical support for some time, and have got through twice, on both occasions being told that this is a widespread issue and to wait until the next day. However, I'm not seeing any improvement. I'm aware of the problems in Edinburgh and the North of England,but I'm in East Anglia.
speedtester.bt.com shows:
Your configured download throughput speed for this service is 135 k
and then:
Two consecutive attempts have failed to initialise an Assured Rate session for your service.Please raise a fault with your service provider stating that the Performance Tester tool indicated a problem with initialising your Assured Rate session. <script type="text/javascript">// paintProgressAndMessageTestBar(-1,""); paintProgressAndMessageOnBar(-1,'An Error has Occured! '); // </script>
My hub stats are:
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 13:59:54
Downstream 1,504 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.0 dB / 19.0 dB
Line attenuation (Down/Up) 60.0 dB / 31.5 dB
Output power (Down/Up) 16.6 dBm / 11.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 4586 / 92
CRC Errors (Down/Up) 297 / 2147480000
HEC Errors (Down/Up) nil / 72
Error Seconds (Local) 221
I hope this is enough information, but I'll happily supply anything else if I can. The uptime of 1.5 days is the time since I was advised to restart / reset to defaults etc.
Thanks for any help.
Deej.

Once a line is stable and working well, it's best left running 24/7
Interventions like resets, replacing accelerators, unplugging the router etc. will cause line "flapping"
And the dslam sees this as instability, and in turn the BRAS lowers the IP profile ....
This is done to achieve stability, and decrease throughput purposefully, all done automatically.
What you have to do, is cure any line noise, plug directly into the master or test socket behind the NTE
faceplate, leave it connected and wait for the throughput to increase.
Very often a rock bottom IP may need a kick to get it out of the doldrums.
Eventually the noise margin will decrease, sync will increase, and IP profile go up.
Depending on how long the line has suffered impulse noise, will determine the time for SNR to come down.
Regardless of which type of phone you used to test quietline ... hum or crackle is a no-no.
It may be the cause of the problems. It could be REIN on the network portion of the connection or dslam
crosstalk, either way it needs to be reported as line noise before you can count it out of the equation.

Very slow 4G speeds

I've had the Thunderbolt for almost 3 months, and my data speeds were normal on both 3G and 4G up until nearly a month ago. Now I'm getting this:
LTE, local server: http://speedtest.net/android/60929916.png
3G, same server: http://speedtest.net/android/60930249.png
LTE, 500mi away: http://speedtest.net/android/60930796.png
3G, same server: http://speedtest.net/android/60930373.png
(not quite sure how to embed images here)
Our area (airport and some surrounding areas) has had LTE since December. I've completely reset my phone so I don't think that's the problem, but it's possible. Websites are very slow to load, any updates download slowly, and pandora has issues streaming, so it's not just the speed test.

Ann154: the links didn't get posted properly, if you copy/paste the links into a web browser they load properly.
deloswilbur: that makes some sense, but i've rebooted my phone plenty of times in the past month (I believe it's actually been one month now) and I'm still getting the same results. also I just went to Orlando, FL for the day and my speeds are fine there. I get 11-25 mbit/sec down and 3-9 mbit/sec up, so it's definitely a problem in my area (Fort Myers, FL).
willzzz99: My home is at the edge of a cell site, but when I drive to and from school/work I can test it on the way, where there is decent LTE coverage, but I get the same exact results. The thing is everything was working fine up until a month or so ago, so something happened here.
here are two tests, first is in orlando, second is in fort myers, both on LTE using atlanta, GA server:
http://www.speedtest.net/android/61306669.png
http://www.speedtest.net/android/61455456.png

E1200 very slow upload speeds

We just got an e1200 v2 router to replace one that died, and upload speeds are very, very slow. I've tried alot of potential fixes already, without success. Some help would really be appreciated. Thank you very much! (Details below.)
Speeds: Download averages about 30mbs (different time of day, multiple different speed tests, etc...) while upload averages less than 0.3mbs. Upload is about 5mbs if I plug any computer directly into the cable modem. It's definitely the router slowing things down.
Router Configuration: Newest firmware (2.0.05), upnp disabled
Wireless: Network Mode = Mixed, WPA Personal, Channel 11 (tried 1 and 6 also)
Other Steps Taken: reset the router, modem, tried adjusting MTU (in increments) down to 1430

You’ve mentioned that upload speed are slow through the router but not if directly cabled. Did you mean to say the upload speed is ok if you are directly cabled to the router or through the modem? How about try disabling WMM under Applications & Gaming > QoS. Check then if there will be an improvement with the upload speed.

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

Very slow upload speed via infinity 2 (business) u...

Very slow upload speed via infinity 2 (business) unlimited after phone line fix (street cabinet) ?
Had my line fixed today by engineer (no dial tone).
Download rate near normal but upload = 0.73Mbps!?
I reset modem and router after he left and appreciate my profile is probably in need of some TLC after a weeks line fault, but is this normal in this situation? I heard it can take some time to reprofile my line and before it was fixed it was even worse at 0.10Mbps
Just seems very low considered the line is now operational again.

48Hrs+ on from residential line reconnection my business infinity 2 broadband upload speed is now approaching normal speed levels.
What a 10 days that was all because some ass disturbed the cabling in the street cabinet!
Yes I'm aware I have business broadband and am talking about it in a residential based forum, but my actual phone line is still residential that it is supplied over and the business broadband product is much the same animal as that supplied to residential customers i.e. Infinity 2 Unlimited. Only the mail and option of static i.p. appear different - that is all.
Jeez.

VERY slow broadband speeds (0.76mbps) Phoneline?

VERY slow broadband speeds (0.76mbps)
Options
on 28-10-2012 12h38
ROUTER STATISTICS
System Up Time: 0:08:24
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up TimeWANLANWLAN
MER
2351
2177
0
136
104
0:00:56
324
0
0
0
0
0:08:24
6762
6743
0
164
132
0:07:57
ADSL Link Downstream UpstreamConnection SpeedLine AttenuationNoise Margin
766 kbps
414 kbps
48.5 db
27.1 db
15.7 db
16.3 db
I'm with Sky, and have had very slow broadband for a while now. Above are the statistics from the test socket. Sky seem to think there is a problem with the line. I've now plugged the router into the main socket.
Any help would be appreciated.
**EDIT** My phone line is with BT, my broadband is with Sky. The problem Sky says is with the phone line it seems.

Hi Joe,
Try sticking your telephone number into this line tester page and let us know if it finds a fault. If it comes back clear, you'll need to go back to Sky as there'll be no issues with your telephone line. If it comes back with a line fault, we can get it progressed towards a fix
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Very slow network speed

Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!!

Since I changed from Mac OS 9.2.2 to Mac OS X 10.3.9 on my dual 450 Power Mac i am having always the same problem. after some new starts my network speed becommes very slow. internet, printer connection and also when using personal file sharing. Folder of 22MB takes about 1 hour insted of 3 seconds to send from one mac to the other. I was trying on both HD´s and with only security update from CD before using Internet. I also have to repair volume permissions.tried reset of PRAM. tried it with both HD´s separately installed, sometimes it helped for short time. but unfortunately I always get the problem also when I am not using intenet connection after installing 10.3.9 on a completely empty HD (also tried to formate mith zeros). On my other mac´s: G3 (400MHz), G4 (500MHz) PowerBook and Power Mac G4 450(single)
the system is working without any problem. same settings! Only the Power Mac G4 dual 450 I am having this problem. Software like Photoshop, X-Press and also Maxxon 4D are running fast and without problems. Please help me!!!

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!

FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing.

Very slow 3G speeds with internal card on Vodafone network: solved!

I'm running the internal 3G card on the Vodafone network in Australia (ThinkPad x200s, Vista) and a couple of weeks ago it slowed right down to less than dialup speed for no reason, and the speed hasn't picked up since.
I finally figured out how to resolve the issue today. I downloaded the Vodafone Internet Connect utlility and now my Internet speeds are restored to 3G speed. However, if I use ThinkVantage Access Connections utility to connect to the Vodafone HSDPA network, the 3G speed crawls again. It appears this is a bug in Acess Connections utility and I'm not sure why it appeared (probably related to a Vista update).
Anyway, if you come across this issue, you should download and connect using the Vodafone Internet Connection utility, which contains many handy features including a usage meter and SMS features.

By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

Download speeds are very slow but speed test is fi...

Similar Messages

Maybe you are looking for