Download stops saying it is corrupt

Hi, Im trying to install/download cs6 production premium I have my serial number, but in the original download it gets about 15 minutes into the download and stops saying something about corrupt. I then thought maybe I have to install the software that make up production premier individually. So i began to do this, some installed others came up saying they are only trials, this is even though I put the serial number into the serial number box. What should I do I would like the package to download as a whole production premium suite

use a different browser, suspend your antivirus/antimalware and use a wired connection.

Similar Messages

  • Mountain lion won't install - downloads but says file is corrupt

    I have purchased mountain lion osx from the App store and downloaded 3 times. Each time I try and install, it says the download is corrupt and that I should uninstall/try again. Any advice?
    Trying to upgrade from 10.6.8 install of os on:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.66 GHz

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • TS3297 itunes cannot download and says it is corrupt what to do

    The message I get is "The update cannot be verified. It may have been corrupt during downloading. The update will be download and checked again the next time that software update runs. "  What can I do to download and fix this?

    Welcome to Apple Communities
    Download it here and install. Sometimes the download fails with Software Update

  • Ipad1.  Movie download stops, say its a mistake. It load a surten amount of gb,then starts allower. How to complite the download?

    Hei.
    I have an iPad 1.  Two days ago i bought a movie via iTunes. Have done this before and everything has gone well. This time it starts download ,it hets aproxx half of the download. And then it drops and starts over. Reach to the same point,and starts again.  Then its stops try,message wrong pops up. A blue button Whitney a shots arrow pointing down appeare. To try again. Same happend. My wi fi is fine. Tried to turn i pad off,rest ,try again...stil the same.
    How can i complete the dowload?
    Or stop/ remove it?
    Any idea. And i dont have an icloud....
    Thanks

    Perhaps you need to post in the Boot Camp forum.

  • The photoshop elements and permier 12 when downloaded it says files are corrupted

    Can not download these programs

    try a different browser and/or a different wired connection and/or a download manager or download from prodesigntools.com
    if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • I downloaded firefox 3.6.9 but it will not open, says it's corrupted.

    Pretty simple, little icon kept popping up urging me to download the newest version of firefox, I tried twice with the same result. It seems to download just fine, but when I go to run the program it says it's corrupted and won't allow me to continue. Never had an issue upgrading before, so I really don't have any idea why it's not allowing it now.
    And please dumb down any responses, I'm not technologically inclined!

    corkyfromhahira wrote:
    Please help.  I just got the new iPhone.  I updated iTunes & restored the phone.  I am trying to setup the cloud.  I downloaded the links from my pc & it says it is complete and go to control panel and open internet and open cloud.  I have to program but it will not open. Why not?  What do I do.?
    That makes no sense, post the exact error message as it is written please.

  • After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

    After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
    == This happened ==
    Every time Firefox opened
    == today 5/24/10 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
    See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

  • I'm having trouble restoring my ipod. The software starts to download but it stops saying that there is a connection problem when there isn't. What can I do?

    I'm having trouble restoring my ipod. The software starts to download but it stops saying that there is a connection problem when there isn't. What can I do?

    Disable the computer's security software during the download and update.

  • HT1657 why does every movie I download stops half way and says err=-50/err=-39?

    Why does every movie I download stop half way and say err=-50/err-39? I also have internet connection that is really good and it keeps saying to check that

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Seriously, this issue is really annoying. why wont my songs download? it wont stop saying there is an error. this needs to be fixed. refund or apple needs to put these songs in my itunes manually if that can be done.

    seriously, this issue is really annoying. why wont my songs download? it wont stop saying there is an error. this needs to be fixed. refund or apple needs to put these songs in my itunes manually if that can be done.

    seriously, this issue is really annoying. why wont my songs download? it wont stop saying there is an error. this needs to be fixed. refund or apple needs to put these songs in my itunes manually if that can be done.

  • Whenever I try to download Aurora it says file is corrupt.

    Whenever I use the download from the Aurura page it says file is corrupt.

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See "Disable virus scanning in Firefox preferences - Windows"
    *http://kb.mozillazine.org/Unable_to_save_or_download_files

  • HT203200 My purchased music video stopped while downloading, it says error (-1450).  Can anyone help?

    I purchased a video, it keeps stopping while it's downloading, it says an error occured (-1450) does anyone know what I can do?, or what this means, I downloaded this 2x's

    If you cannot sucessfully restore your iPod, see if this following post helps your situation -> A possible solution for errors 1417 and 1418
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • HT201272 when i start downloading a CD purchase it downloads approx 3 to 4 songs then just stops says downloading waited a hour still downloading had to force quit iTunes then reopen to complete download keeps doing this every time i purchase a cd any ide

    when i start downloading a CD purchase it downloads approx 3 to 4 songs then just stops says downloading waited a hour still downloading had to force quit iTunes then reopen to complete download keeps doing this every time i purchase a cd any ideas ?

    I too am facing this problem, however a little differently. I am in the process of uploading my vinyl collection to digital format in Audacity and am having this problem with multiple tracks when played in iTunes. The first few albums I ripped play just fine in iTunes, but the last few skip over about the last minute of every song and go to the next song. As you said, if you drag the time marker past the skipping point though, the rest of the song will play to the end just fine. I then synced these songs onto my iPod and they play perfectly straight through. I was leaning toward a bad mp3 encoding process that was maybe creating a glitch but I'm not sure at this point if they play correctly on my iPod. In quicktime the song will just stop playing at that specfic point, but if you hit play again, it will continue to the end. I can say though, I haven't seen this problem with any iTunes download, or ripped CD that I have ever put into iTunes (which makes my situation a tad different than yours), it's been purely the songs that I have imported via Audacity from LP's.

  • When I try to update or download a newer version I get a box that says file is corrupt, why?

    Everytime I try to download a newer version of Mozzilla Firefox it starts to download, then displays a run box, and when you push the run button, a box appears and says file is corrupt. I recently installed windows 7 and I have slow internet.

    Any apps that she downloaded onto the device are tied to her apple ID.  They cannot be transferred to another account.  To update those apps, you would either need her password, or you could delete the apps and download them using your own apple id.

  • I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

Maybe you are looking for

  • CommandAction works through OnDeviceDebug, but not when installed from jar

    Hi everybody, I'm trying to run a HelloMIDlet example and if I run it on emulator it works fine, also when I run it on mobile through OnDeviceDebug from eclipse it works fine, but when I install a jar file and run the application it ends with Applica

  • Error during Installation of OBIEE 11.1.1.6

    Hi All, I am facing following error during in installation of OBIEE 11.1.1.6 ON WIN 2008 SERVER. Before begin the installation I have done uninstall of OBIEE 11.1.1.5. Any help would be appreciated. *************** Trying to Start OPMN **************

  • LMS 4.2.3: Catalyst 6500 with SUP-2T is invisible in Inventory

    Catalyst 6506 with SUP-2T (s2t54-advipservicesk9-mz.SPA.151-1.SY1.bin) was discovered by LMS, but he is invisible in Inventory. I see this switch on Topology and Cisco View is working fine, but I never seen him in Hardware Summary Tab for example. Ho

  • Logo is riverse! i.e. looking like in mirror ( upside-down )

    Hi ABAP / BASIS Experts, I got a form, in which the logo is printing in riverse way i.e. looking like, when u see it in mirror! So, culd u pls. tell me How to resolve it? Only logo print upside-down and remain text(Data) is ok. This is working fine o

  • Ant logfile is showing debug statements

    Hi, I have a application which I run it using ant. If I type the ant -logfile xxx.log. All the logs will be printed in the xxx.log file. But along with a my logs, it is also printing DEBUG logs, which is making the file huge. Can anybody tell me if t