Download to an external hard drive: How to start the program?
I seem to have successfully downloaded and installed the trial version of Adobe Photoshop CS5. My hard drive shows several separate folders: Adobe, Adobe Photoshop CS5.1, Adobe Bridge CS5.1, Adobe Device Central CS5.5, and Adobe Extension Manager CS5.5. How do I open the program and use it?
Thanks.
Which operating system are you using? Typically you will want to double click on the application itself to launch the program. They will typically end in .exe for Windows applications or .app for Mac apps.
Similar Messages
-
Current computer that I just bought used is operating on Leopard 10.5.8
I have Mountain Lion OS X CD installation files downloaded on my external hard drive from another Mac that I have owned.
How do I use my external HD to download and Install Mountain OS X wizard.
Is the only way to do this to buy a copy of snow leopard and then once upgrading to that, plug in my external HD and then access the Mtn install file as I would if I had the installation CD?
When I try to access the install file from my external HD, i get to the installation window and then when I am to select a hard drive to install it on I receuve a red exclamation mark error that says it can not be written to the HD. Why is this? Because I'm not on snow leopard but rather leopard?As you have the installer on a DVD, you can do a trick that consists in formatting the hard drive, and then, install Mountain Lion.
First, make a backup of your files with Time Machine > http://support.apple.com/kb/HT1427 I recommend Time Machine because it will be easier to restore your files later.
Then, insert the DVD with Mountain Lion and hold the C key while your Mac is starting, so you will see a window with different options. Open Disk Utility, choose Macintosh HD in the sidebar, go to Erase tab and erase the drive.
After erasing the drive, you can install Mountain Lion. Close Disk Utility and install it. During the initial setup, it will ask you to restore your files, so plug the external drive with the backup and follow its steps. Note that PowerPC apps aren't compatible -
When I plug in my ipad it automatically tires to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?
You can open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
To move the current backup folder from C: to D: type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
tt2 -
I have QuickMail Pro on my old iMac OS 9. Can Quick Mail's inbox, outbox and sent mail be downloaded onto an external hard drive? If so, how? I tried to drag and drop but that didn't work.
Ok, best to contact itunes then so they can look into it
-
I have just downloaded iPhoto from the app store. The photo library from my old laptop was backed up on an external hard drive and I retrieved the photos from there. Now when I open the photos on my new Mac Book Pro, they are small - am I missing something?
I am using 10.8.2 Mountain Lion btwI dragged the Photo library icon from the backup drive on to iPhoto on the laptop
That means you imported one Library to another.
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
So the reason you're seeing small photos is because you're seeing the iPhoto thumbnails from the back up library.
So, what to do?
Do you still have the back up? If so, trash this bunged up library and restore from the back up again. HOw to restore will depend entirely on how you made the back up, but no version of restoring includes importing the library.
Regards
TD -
Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?
Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy? -
How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps! -
My start up disk is full and I need to move my files to an external hard drive, how do i do so?
My start up disk is full and i need to move my files to an external hard drive, how do i do so?
Ensure that the external is correctly formatted
Drag and dropped the files
Test to be sure that the moved files work
Once the moved files work delete the originals
Allan -
I have a new computer and have all my music is on an external hard drive. I have the external hard drive connected to my computer. How do I get my music that is on my ipod to go to the itunes on the new computer.
What error message are you getting when you try to launch iTunes? (Precise text, please.)
-
I want to keep my music on my macbook pro and my movies on my external hard drive how do i get itunes to recogonise my external hard drive.? so i can drag more movies across later. i am able to plug my external into my Apple Express to stream to my apple Tv arent i..???
Post your question in the iTunes area:
https://discussions.apple.com/community/itunes/itunes_for_mac -
ok here goes. I have so much music I don't want to store it all on my computer and would like to store on an external hard drive. So if all my music is on the external hard drive, how will iTunes see it in order to play the music. Thanks
This article might help you moving/relocating your library :
http://support.apple.com/kb/ht1449
Cheers AF -
I did backup from my Imac to external hard drive, how can I unzip that backup to my mac
I did backup from my Imac to external hard drive, how can I unzip that backup to my mac again
It may be Time Machine, but Time Machine doesn't store backups in .zip folders. Open Finder and select your backup external disk in the Finder sidebar, under "Devices". If you are using Time Machine, you should see a folder called "Backups.backupdb".
If you are using Time Machine and you want to restore a full Time Machine backup, there are different methods depending on the Mac OS X version you are using. Open > About this Mac, see Version and tell me what version you are using -
my iTunes library is on an external hard drive; how do I set it so other users (accounts) on my imac, will also have the same library, with the same playlists
Quit iTunes.
Sign into another user account.
Hold Option, launch iTunes.
Select Choose library... and select the iTunes folder on the external.
Do this for all users.
NOTE: You must quit iTunes when switching users as the library can only be opened by one user at a time. -
i have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive
What are you using to search? You should be able to search any drive in from the Finder. If you're having trouble, try "EasyFind" from the App Store (free). You can search any volumes with it.
Clinton -
Problems getting an external hard drive to work on the new Airport Extreme
I have spent hours trying to get my 320GB external hard drive to work with the new airport extreme 802.11N. I have spent hours pouring over all of the posts here discussing possible solutions, all of which have not worked. This morning, however, I gave it another try and FINALLY, I have it working. I tried something simple. Here it is:
Using the Apple Disk Utility Program, I formated my drive using the MS-DOS mode, called my Hard drive "ItunesHD". It took about 20 minutes to complete (i'm assuming because of the size of the drive). I then unplugged the router and hard drive, turned on the hard drive, then the router. After my macbook pro reconnected, I clicked on the iDisk utility icon in my menu bar, provided my password and FINALLY saw the network drive icon on my desktop!!! It seems that formatting my drive using MS-DOS compatibility mode finally worked for me. I'm not saying this will work for anyone else who is having this problem, but you can at least try it. I tried all of the MAC formatting options and have had no luck.
What I would like to know now is (..if anyone has these answers, please let me know):
1. What is the maximum SINGLE drive capacity that this router will understand...500GB, 1TB, 2TB? I would like to get the biggest bang for my buck.
2. Keeping #1 one in mind, I purchased an Apple TV (still waiting on it to arrive) and I would like to know if it will read multiple hard drives connected to the Airport Extreme router (...say (2) 500GB hard drives). I know you can have multiple libraries in iTunes (which to me is a cheesy solutions, there should be an option in the preferences that would allow you to save your music in one place and your movies in another). Anybody have any idea on this one?
I basically want to rip all of my dvd movies on a big hard drive connected to my airport extreme to use with my AppleTV , so I just need to find out about the maximum size and hooking up more than one hard drive and getting the AppleTV to recognize them all.
thnks
MacBook Pro Core Duo Mac OS X (10.4.8)Sorry you had so much trouble hooking up a hard drive to the base station. I've done some experimenting with the feature and this is what I've found out.
You can use either the native Mac format, Mac OS Extended, or the Microsoft format known as FAT. Apple calls FAT, MS-DOS File System in Disk Utility.
If you use Mac OS Extended, the Macs on the network will be able to connect to the drive using the native AFP (Apple File Protocol) or the Microsoft native SMB (Server Message Block) protocol. PCs will only use the SMB protocol of course.
If you use MS-DOS File System both the Macs and the PCs will only use SMB to connect to the drive over the network.
Basically I've found everything works as expected with regard to volumes connected to a network.
One thing I don't have installed is the iDisk Utility. I'm wondering if it may be the cause of the problems you were having. But reading through your post it may also be the difference between expected behaviour and the proper procedure for discovering and mounting network volumes. Let me explain.
You only mention having trouble getting the drive to show up on your Desktop, you didn't describe how you went about discovering the network drive. It isn't just suppose to show up on your desktop when you plug it in to the Extreme base station. It doesn't work like the iDisk or disks connected directly to your computer using USB/Firewire.
Normally with network drives you're suppose to either browse for them using the Network icon in the Finder or using the Connect to Server command in the Finder's Go menu, you would type the address in directly for the network volume you want to mount. Try it and see what happens.
Now to answer your other questions.
I don't have a volume large enough to hit any limits the base station may have but I did read a post about someone who said they had a 1.5 TB volume connected and could only see 1 TB of it. They were forced to partition the drive to see all available space and of course the volumes showed up as two separate drives. One thing wasn't made clear though. They didn't say what volume format they were using to format the drive, Mac OS Extended or MS-DOS.
Everything having to do with the AppleTV is just speculation at this point since no one has one yet but from what has been demonstrated so far, AppleTV relies on iTunes. In other words, it won't pull data from network volumes on its own, a computer running iTunes needs to feed it.
Maybe you are looking for
-
Hi All I have questions around the creation of Employee as a vendor. My understanding is that there is native SAP interface that require configuration and then the employee vendor can be created with the use of the info type. I would appreciate if yo
-
Display sever fields in Word Document
Hi When opening a .docx document from SharePoint I can see most of the Content Type Fields in the Properties bar but some fields are not showing. They are simple line of text field and are properly defined in the site content type and in the DocLibs
-
Add multiple schemas in one workspace
Hi all, In my apex application i have to add to schemas in one worksapce and hav to right sql query by using objects of both the schemas... can anyony tell me how can i achieve this functionality in apex... Thanks, Shruti
-
Portugal Infotype 0002 screen edit
Hello, I have a requirement that Portugal want to use the same fields as Spain to store document types and number. Spain has it's own screen 2004 in module pool MP000200 and Portugal screen 2000 in module pool MPV33200. In screen 2004 used by Spain i
-
im new to the mac computers and just got a new Imac 21.5 inch. on my windows computer i just went to control panel. on the mac do you go to finder and just drag what you want deleted into the trash bin? i want to know how to completely get rid of a p