Download to Excel after Unicode Upgrade not working
Hi
Before the unicode upgrade we downloaded a spreadsheet, specifying the columns and table. Since the upgrade the spreasheet opens and start to create the columns, but as soon as it tries to write the table we get an error at teh following code.
class C_OI_CONTAINER_CONTROL_CREATOR method i_oi_spreadsheet~insert_one_table
Error as follows
\INTERFACE=I_OI_ERROR
I_OI_ERROR~ERROR_CODE CALL_NOT_FLUSHED
I_OI_ERROR~IS_FLUSHED
I_OI_ERROR~HAS_FAILED X
I_OI_ERROR~HAS_SUCCEEDED
ERROR_NR 999999-
ERROR_STRING 50
Does anyone know why this is occuring and what the solution please?
Thanks.
Can you let us know your support package levels? Also you right click and then export it to Excel?
Something to do with packages and xcel levels as well.
Similar Messages
-
Exchange mail after iOS 8 upgrade not working
exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server. -
Microsoft Excel 2013 add-in not working after update
I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system? -
I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?
it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube -
I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do
did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable? -
I downloaded firefox 4 and it will not work on my Mac OSX4.11
I downloaded firefox 4 and it will not work on my Mac OSX4.11.
Very weird day in Firefoxland
First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
WOW!! Are the wheels off the wagon here or what!?! -
cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help
From Apple Support...
Here are troubleshooting steps that should help you fix the problem.
1) Quit App Store in multi-tasking.
2) Tap Settings.
3) Tap Safari.
4) Tap Clear History.
5) Tap the Clear History button.
6) Tap Clear Cookies and Data.
7) Tap the Clear Cookies and Data button.
Try purchasing an app again from the device to get the security question prompt. You really need to set up the security question.
...it seems to have worked for me..... -
The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
SM36/37: Specification "After Job" does not work for Daily "periodcity"
I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
LaraPlease close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity"; -
All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.
They work just fine. whatever issues you have are specific, but without proper system info, browser info and other details nobody can even begin to guess.
Mylenium -
I am trying to download Illustrator CC and it is not working. It is sort of stuck on the page "Illustrator is downloading". Any advice?
Lena,
Have you downloaded the Application Manager?
You may try to restart the Creative Cloud application by quitting and relaunching it.
Or this may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
HELP !! I have downloaded adobe reader but it's not working
I have downloaded adobe reader but it's not working ?? Everytime I try to open a page useing adobe it just comes up with a message saying you need to download and registra ?? Im on Mac book pro. Any help would be great as its driving me MAD
If you go to your applications folder (Go>Applications) do you have Adobe Reader in there? If you open Adobe Reader and choose File>Open are you able to open a pdf file?
-
Anlysis authorization implemented after Cascading is not working
Anysis authorization implemented after Cascading is not working.
Example: i have 3 dropdownboxes in WAD . Frist dropdownbox State, second dropdownbox District, third dropdownbox Town.In the first dropdown box i selected state AP ,it should show only districts in AP in the second dropdownbox.
But it is not showingin the second dropdownbox.
Please help meHi Priya,
The issue may be due to the SQL Reporting Services maximum number of parameter items. We can try to add following code to Web.config file to resolve the issue.
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="30000" />
<add key="aspnet:MaxJsonDeserializerMembers" value="30000" />
</appSettings>
(Note: We can according to our requirement to set these values. After that, restart all SQL Server services. )
By default, the Web.config file is located in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
More detail information, you can refer to the article about SQL Reporting Services maximum number of parameter items.
http://sqlsrv4living.blogspot.in/2012/10/sql-reporting-services-maximum-number.html
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Web Template - Variable & Export to Excel Web Items are not working
Hi Experts,
In a Web Report & Web Template Variable & Export to Excel Web Items are not working ; Any body have any idead ?
Do i need to write any HTML code to funtion those web items.
Thanks
KArunaDear Karuna,
Review your default template. Probably is 0ANALYSIS_PATTERN.
Reactive the version D and check again.
Also, you are able to modify the webitems on Export to Excel on 'BUTTON_TOOLBAR_2' -> Button list number 4.
And, you are able to check the 0ANALYSIS_PATTERN_EXPORT, in case of configuration.
If you want to remove/add new items, I suggest you to save as another name. SAP does not allow to modify delivered objects
ex:. 0Objects.
Best Regards,
Edward S. John -
LOCK THE USER AFTER X ATTEMPTS --NOT WORKING?
LOCK THE USER AFTER X ATTEMPTS --NOT WORKING
OpenSSO -->Configuration-->Authentication -->Core -->Login Failure Lockout Count:( 3 ) --> Warn User After N Failures: ( 4)--> Email Address to Send Lockout Notification: --> [[email protected]|mailto:[email protected]]
I tried above step but failed to achieve LOCKING the ACCOUNT...
Could some one please help me...This only works if you use the LDAP auth module.
Maybe you are looking for
-
This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and recei
-
Error message while closing the Notification
Hi All, When trying to close notification the system provides error message u201CError in EDI Partner or partner profile partner number". The Relevant transaction code is QM02. EDI relevant partner profiles are maintained in table EDPVW which has ent
-
Hello - I attempted to download a "critical" update for Excel, however, it failed. I shut down the computer. Now I am not able to access docs in excel either ones I have already created or create new ones. I continue to get an error message. Plea
-
How to exit published .exe in Captivate 5.5
I have published a .exe of a project in Captivate 5.5 in fullscreen. I want it to loop (which I set up) but also have the ability to escape/exit when done to return to the desktop. I can't figure out the keyboard shortcut to terminate the .exe when r
-
SE16N Export Local File - Header Line Every 60,000 Records
Good Day, After a recent system upgrade to SAP ECC 6.0 Release 701, Level 007 (from Level 004), we received word that exporting to a local file from SE16N now creates a header line after every 60,000 records. This occurs on both SAP GUI 7.10 Patc