Download to excel Issue in obiee 11g (11.1.1.6.4)

Hi ,
One report contains 1,00,000 results, when the user is trying to export it into excel. they may not get all (1,00,000) records. We are getting exceed limit. Could you please provide me the solution?
Regards,
Sree

sree,
change the download number in inistanceconfig file and check the updated value is available in EM after restarting the services(OPMN).if not enter the required value in download button w't have you been given in instanceconfig.xml.
Instanceconfig file path: <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
change value in:
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
check value after restart the service in em, same values is there or not: Maximum nuber of rows to download.
Thanks,
Narasimha

Similar Messages

Down load to excel issue in obiee 11g

Hi all,
after i download to excel and open the file it is prompting as below.is there any way to get rid off the prompting,any modifications required to achieve this.
The file you are trying to open,'Balance_sheet_Hier[1].xls',is in a different format than specified by extension.Verify that the file is not corrupted and is from a trusted source befor opening the file.do you want to open the file now?
Also we want to open the excel in xlsx format only.
Any help in this regard will be highly appreciated.
Thanks,
Chandra

Are you using 2007 excel version?
This warning typically occurs when exporting the contents of a table to Microsoft Excel 2007. This alert is caused by the new extension checking mechanism introduced in Microsoft Excel 2007.
Check this
When you open a file in Excel 2007, you receive a warning that the file format differs from the format that the file na…
Mark if helps.
Thanks,

Download to Excel after migration to 11g: Table lose formats

Hi,
after migration to 11g we make some test.
Download to excel is not working correct. Calculated column lose the rounding, Table with green line lose the format of the borders.
Is this a known issue?
Regards,
Stefan

Yes. Refer to ID 1380981.1 and ID 1451127.1
It depends on which version of OBIEE you're working with though and the Locale set for Excel.
Please assign points if helpful/correct.

Exporting Issue in OBIEE 11g

Hi,
I am having an issue in exporting a huge amount of data in OBIEE 11g, what happens is : I am able to export the Whole table data which is around 6000 Records, but when I open Excel Sheet the Alignment of the report is ruined after Record number 1890.
I tried this from different browsers and the same result appeared.
can anyone help me with that ?
Regards,

Hi refer this link
http://shivabizint.wordpress.com/2011/08/26/export-more-than-6500-obiee-11g-records-to-excel/
Please mark if its helps you......

Login issue in OBIEE 11g

Hi Experts,
We are using OBIEE 11g
We are facing the strange issue while accessing the presentation services login page.
I had uploaded the RPD file using EM,it is working for 1 hour with out any issue.
After some time the fallowing error is coming. then we are not able to access presentation services,
I had observed all the services are down in EM>Capasity manage ment tab.
Longing screen is coming ,but after entering the credentials ,it is showing login into…but not at all opening the window.
Error connecting to the Oracle BI Server: Could not connect to the Oracle BI Server because it is not running or is inaccessible. Please contact your system administrator.
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred.
[nQSError: 12010] Communication error connecting to remote end point: address = SERVERNAME.com; port = 9706.
[nQSError: 12008] Unable to connect to port 9706 on machine SERVER_NAME.com.Please have your System Administrator look at the log for more details on this error. (HY000)
Thanks in advance.

Hi ,
I normally do this to fix this problem
1>Disable the network , keep the loopback adaptor enabled and then restart the services.
2> You can enable the network after services are restarted.
If you want a more practical solution and dont want to disable network again and again, then you would find the blog below useful.
http://www.rittmanmead.com/2012/08/obiee-fmw-and-networking-on-dhcp-hosts/
Hope this help.
Thanks,
Maqsood

Agent Issue In Obiee 11g

In OBIEE 11G, how to send automatically one email for different level users for having a look different data by agent?
For example:
One report architeture:
Region--------District---------Sales
Region 1------District1--------100
------------------District2---------200
Region 2------District3---------300
------------------District4---------400
One Level can have a look at data:
Region-----------------Sales
Region 1-------------300
Region 2------------ 700
Another Level can have a look at data:
Region--------District---------Sales
Region 1------District1--------100
------------------District2---------200
Region 2------District3---------300
------------------District4---------400
Is it possible to implement this requirement in OBIEE 11.1.1.6? Thanks.

Hi Satya,
Thanks for you help.
If I add this new users into one group in users table and send one email to group, it will no result. Message display as below:
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 0 of 0
AgentID: /shared/test/sad
Invalid subscribers skipped: weblogic
create table USEREMAIL
Logon VARCHAR2(50),
Display_Name VARCHAR2(50),
Group_Name VARCHAR2(50),
TimeZone VARCHAR2(50),
Language VARCHAR2(50),
Locale VARCHAR2(50),
Email VARCHAR2(50),
Email_Priority VARCHAR2(50),
Email_Type VARCHAR2(50),
Cell_Phone VARCHAR2(50),
Cell_Phone_Priority VARCHAR2(50),
Pager VARCHAR2(50),
Pager_Priority VARCHAR2(50),
Handheld VARCHAR2(50),
Handheld_Priority VARCHAR2(50)
Create table users(
USERID varchar2(50),
USERPASSWORD VARCHAR2(50),
GROUP VARCHAR2(50)
insert into useremail values
('kobe','kobe_xu','BIAdministrators','','','','[email protected]','H','HTML','','','','','','');
insert into users values
('kobe','123456',''BIAdministrator');
and create AUTHENTICATION block:
select USERID from USERS where USERID=':USER' NQS_PASSWORD_CLAUSE(and USERPASSWORD= ':PASSWORD')NQS_PASSWORD_CLAUSE
CREATE AUTHORIZATION BLOCK and set row-wise:
SELECT 'GROUP', USERROLES FROM USERS WHERE USERID=':USER'
Please help me to find the issue, thanks very much for your precious time.

RPD deployment issue in OBIEE 11G

Hi All,
I am getting issue while deploying my own RPD. I followed the below link to deply but when i clicked on Lock & Edit button , It was not giving me the option to choose the new RPD. That browse button was disable.
http://prolynxuk.com/blog/?tag=obiee-11g
Please help if anyone knows .
thanks...

Hi,
Did you clikc on Deploy tab->Repository->Lock & Edit button configuration?
After you click browse option gets enabled and you can see release configuration above.Can you see release configuration?
Regards,
Srikanth

Data level Security issue in obiee 11g

Hi,
We are trying to implement data level security, let me explain the issue
The requirement is, we have 7 schools and each school has one principle , there will be a Superdintent who has 3 schools under him. so now when each principle logs in to dashboard we have a prompt for school i.e Name of school in that prompt he should see only his school and even the data of that school only which are assigned to him, now when Superdintent logs in he should see all 3 schools in the prompt and data. I have gone through this link (http://www.rittmanmead.com/2012/03/obiee-11g-security-week-row-level-security/) but could not achieve.
We are able to achieve by writing SQL in BMM layer ( LTS Table) so where ever the table is used in dashboards the security is being applied and we are able to see what we want. We want to achieve this by application role, But when we are creating session variables and applying on Application Role its not working. We want to achieve this by using Application role because suppose in other dashboards when the table is not used or pulled in, it will not work.But if we do it using application role its applies to all dashboards and data is resticted. so that when principle or Superdintent logs in automatically its restricts the data.
Below is the SQL which we used in BMM LTS, its working fine. But when the same SQL is applied in Application Role it's not working.
SQL used in session variable -
select 'SCHOOL_CD1', school_cd1 from w_staff_d where empl_id ='VALUEOF(NQ_SESSION.USER)'
and job_desc1 = 'Principal High School - KPI'
Any suggestions please ??
Thanks,
VRP

Hi,
I pasted the log view below by applying SET VARIABLE LOGLEVEL=2, DISABLE_CACHE_HIT=1;, ran this report by applying SQL in Session variable. Let me know if you want anything -
Thanks
[OracleBIServerComponent] [TRACE:2] [USER-0] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] ############################################## [[
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/Key Performance Analytics/Analysis/Climate and Culture/Analysis for total school suspensions',LOGLEVEL=2, DISABLE_CACHE_HIT=1; SELECT s_0, s_1, s_2, s_3, s_4, s_5, s_6, s_7, s_8, s_9, s_10, s_11 FROM (
SELECT
0 s_0,
"High School KPI"."- Date"."School Year" s_1,
"High School KPI"."- Grade"."Grade Level" s_2,
"High School KPI"."- School"."School Name" s_3,
"High School KPI"."- School Suspensions"."% of Students Suspended" s_4,
"High School KPI"."- School Suspensions"."Count of Students Enrolled" s_5,
"High School KPI"."- School Suspensions"."Count of Students with Incidents" s_6,
CASE WHEN (CASE WHEN MAX("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END +(CASE WHEN (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END)=0 THEN CASE WHEN CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END <0 THEN (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END *-1) ELSE CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END END ELSE (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END) END /10))<0 THEN 1 ELSE 2 END s_7,
CASE WHEN (CASE WHEN MAX("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END)=0 THEN CASE WHEN CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END <0 THEN (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END *-1) ELSE CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END END ELSE (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END) END s_8,
CASE WHEN MAX("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END s_9,
CASE WHEN MIN("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY ) END s_10,
REPORT_AGGREGATE("High School KPI"."- School Suspensions"."% of Students Suspended" BY "High School KPI"."- Date"."School Year") s_11
FROM "High School KPI"
WHERE
(("- Discipline Action"."Discipline Action Code" = 'Suspension') AND ("- Date"."School Year Desc" = VALUEOF("school_year_desc")))
) djm ORDER BY 1, 2 ASC NULLS LAST
[2012-10-17T18:36:55.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-23] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] -------------------- General Query Info: [[
Repository: Star, Subject Area: High School KPI, Presentation: High School KPI
[2012-10-17T18:36:55.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-18] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] -------------------- Sending query to database named SPA (id: <<62064>>), connection pool named Initialization Block Connection Pool: [[
WITH
SAWITH0 AS (select T30351.SCHOOL_YEAR_DESC as c2,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T29835.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30351.SCHOOL_YEAR_DESC, T29835.STDNT_WID ORDER BY T30351.SCHOOL_YEAR_DESC DESC, T29835.STDNT_WID DESC) as c7
from
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_SCHOOL_YEAR_D T30351 /* KPI_W_SCHOOL_YEAR_D */ ,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_ENROLL_SCHOOL_F T29835 /* KPI_W_STDNT_ENROLL_SCHOOL_F */
where ( T26564.GRADE_LEVEL_WID = T29835.GRADE_LEVEL_WID and T26686.ORGANIZATION_WID = T29835.ORGANIZATION_WID and T29835.SCHOOL_YEAR_WID = T30351.SCHOOL_YEAR_WID and T30351.SCHOOL_YEAR_DESC = '2011-2012' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH1 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
D1.c2 as c2,
count(distinct D1.c6) as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH0 D1
group by D1.c2, D1.c4, D1.c5),
SAWITH2 AS (select sum(D1.c1) over (partition by D1.c2) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH1 D1),
SAWITH3 AS (select T30647.SCHOOL_YEAR as c3,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T26023.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30647.SCHOOL_YEAR, T26023.STDNT_WID ORDER BY T30647.SCHOOL_YEAR DESC, T26023.STDNT_WID DESC) as c7
from
W_DISCIPLINE_ACTION_D T29975 /* KPI_W_DISCIPLINE_ACTION_D */ ,
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_KPI_QTR_DAY_D T30647,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_DISCIPLINE_F T26023 /* KPI_W_STDNT_DISCIPLINE_F */
where ( T26023.DISCIPLINE_ACTION_WID = T29975.DISCIPLINE_ACTION_WID and T26023.ORGANIZATION_WID = T26686.ORGANIZATION_WID and T26023.DATE_WID = T30647.DATE_WID and T26023.GRADE_LEVEL_WID = T26564.GRADE_LEVEL_WID and T29975.DISCIPLINE_ACTION_CD = 'Suspension' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH4 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
count(distinct D1.c6) as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH3 D1
group by D1.c3, D1.c4, D1.c5),
SAWITH5 AS (select sum(D1.c1) over (partition by D1.c3) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH4 D1)
select distinct case when D1.c2 is not null then D1.c2 when D2.c3 is not null then D2.c3 end as c1,
case when D1.c4 is not null then D1.c4 when D2.c4 is not null then D2.c4 end as c2,
case when D1.c5 is not null then D1.c5 when D2.c5 is not null then D2.c5 end as c3,
case when D1.c3 = 0 then NULL else D2.c2 * 100.0 / nullif( D1.c3, 0) end as c4,
D1.c3 as c5,
D2.c2 as c6
from
SAWITH2 D1,
SAWITH5 D2
where ( nvl(D1.c2 , '1') = nvl(D2.c3 , '1') and nvl(D1.c2 , '2') = nvl(D2.c3 , '2') and nvl(D1.c4 , '1') = nvl(D2.c4 , '1') and nvl(D1.c4 , '2') = nvl(D2.c4 , '2') and nvl(D1.c5 , '1') = nvl(D2.c5 , '1') and nvl(D1.c5 , '2') = nvl(D2.c5 , '2') )
order by c1, c2, c3
[2012-10-17T18:36:55.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-18] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] -------------------- Sending query to database named SPA (id: <<62434>>), connection pool named Initialization Block Connection Pool: [[
WITH
SAWITH0 AS (select T30351.SCHOOL_YEAR_DESC as c2,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T29835.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30351.SCHOOL_YEAR_DESC, T29835.STDNT_WID ORDER BY T30351.SCHOOL_YEAR_DESC DESC, T29835.STDNT_WID DESC) as c7
from
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_SCHOOL_YEAR_D T30351 /* KPI_W_SCHOOL_YEAR_D */ ,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_ENROLL_SCHOOL_F T29835 /* KPI_W_STDNT_ENROLL_SCHOOL_F */
where ( T26564.GRADE_LEVEL_WID = T29835.GRADE_LEVEL_WID and T26686.ORGANIZATION_WID = T29835.ORGANIZATION_WID and T29835.SCHOOL_YEAR_WID = T30351.SCHOOL_YEAR_WID and T30351.SCHOOL_YEAR_DESC = '2011-2012' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH1 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
D1.c2 as c2,
count(distinct D1.c6) as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH0 D1
group by D1.c2, D1.c4, D1.c5),
SAWITH2 AS (select sum(D1.c1) over (partition by D1.c2) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH1 D1),
SAWITH3 AS (select T30647.SCHOOL_YEAR as c3,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T26023.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30647.SCHOOL_YEAR, T26023.STDNT_WID ORDER BY T30647.SCHOOL_YEAR DESC, T26023.STDNT_WID DESC) as c7
from
W_DISCIPLINE_ACTION_D T29975 /* KPI_W_DISCIPLINE_ACTION_D */ ,
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_KPI_QTR_DAY_D T30647,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_DISCIPLINE_F T26023 /* KPI_W_STDNT_DISCIPLINE_F */
where ( T26023.DISCIPLINE_ACTION_WID = T29975.DISCIPLINE_ACTION_WID and T26023.ORGANIZATION_WID = T26686.ORGANIZATION_WID and T26023.DATE_WID = T30647.DATE_WID and T26023.GRADE_LEVEL_WID = T26564.GRADE_LEVEL_WID and T29975.DISCIPLINE_ACTION_CD = 'Suspension' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH4 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
count(distinct D1.c6) as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH3 D1
group by D1.c3, D1.c4, D1.c5),
SAWITH5 AS (select sum(D1.c1) over (partition by D1.c3) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH4 D1),
SAWITH6 AS (select case when max(D1.c1) = 0 then NULL else max(D2.c1) * 100.0 / nullif( max(D1.c1), 0) end as c11,
case when D1.c2 is not null then D1.c2 when D2.c3 is not null then D2.c3 end as c12
from
SAWITH2 D1,
SAWITH5 D2
where ( nvl(D1.c2 , '1') = nvl(D2.c3 , '1') and nvl(D1.c2 , '2') = nvl(D2.c3 , '2') and nvl(D1.c4 , '1') = nvl(D2.c4 , '1') and nvl(D1.c4 , '2') = nvl(D2.c4 , '2') and nvl(D1.c5 , '1') = nvl(D2.c5 , '1') and nvl(D1.c5 , '2') = nvl(D2.c5 , '2') )
group by case when D1.c2 is not null then D1.c2 when D2.c3 is not null then D2.c3 end )
select D2.c11 as c1,
D2.c12 as c2
from
SAWITH6 D2
order by c2
Edited by: 965968 on Oct 17, 2012 11:49 AM

BI Starting Services Issue in OBIEE 11g

Hi,
I have installed OBIEE 11g and it was working fine but today when i have started the BI services its showed this error
*<Jan 7, 2011 6:42:52 PM UZT> <Error> <oracle.wsm.resources.policymanager> <WSM-02311> <Failed to retrieve requested documents due to underlying error*
*"java.rmi.RemoteException: EJB Exception: ; nested exception is:*
*oracle.mds.exception.MDSRuntimeException: MDS-00001: exception in Metadata Services layer MDS-00001: exception in Metadata Services layer*
*weblogic.common.resourcepool.ResourceDisabledException: Pool mds-owsm is Suspended, cannot allocate resources to applications..".>*
*<Jan 7, 2011 6:42:55 PM UZT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "mds-owsm": The Network Adapter could not establish*
the connection>
Because of the above error web login Page (http://masood:9704/analytics/saw.dll?bieehome&startPage=1) is not displayed and its showed an error below
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.5.1 500 Internal Server Error*
The server encountered an unexpected condition which prevented it from fulfilling the request.
But the Console admin Page (http://masood:7001/console/login/LoginForm.jsp) and Map viewer admin Page (http://masood.:9704/mapviewer) working fine.
Only the sample reports and Dashboards Area are not displayed. I have tried to find out the solution of this issue but i am not getting the right solution.
If any one knows that whats the reason behind this issue, so Please help me. I will be very thankful, Thanks.

Hi,
I experienced the same problem, the exact errors you got. After much digging, i discovered that my database was not registering with the listener, so i could not connect to it from SQLDeveloper and other tools. After spending much time on the internet trying to solve the error "*ora-12154 tns could not resolve the connect identifier specified*" which was what SQLDeveloper was returning, the problem still persisted.
A colleague of mine then gave told me to try and force my database to register with the correct listener from command line with these commands:
net start OracleServiceDB1
C:\oracle\product\11.2.0\dbhome_1\BIN\oradim.exe -startup -SID DB1 -usrpwd password -pfile C:\oracle\admin\DB1\pfile\init.ora
It turned out that my windows events were full, so i had to clear all events and increased the log size and made sure they are overwritten as needed. And alas, everything was fine again!!!
What a nightmare it was - or may be it was Windows to blame!!! I hope this helps somebody out there sometime.
Obviously, you need to change the paths and other parameters to suite your system. OracleServiceDB1 is the name of my service and DB1 is the name of my database. By the way , i ran it on a Windows XP machine.
Cheers
Edited by: 842996 on 09-Mar-2011 04:48

Parent Child Hierarchy Issue in OBIEE 11g

Hi All,
I am in OBIEE 11G v6. I have a sales fact table where the grain is one sale. So I have one row for every sale done.
Now I have a ragged employee hierarchy like this with David at the root node.
David >>Richard>>Sean
David >>James
Also, I have a role dimension which gives me what role each employee has performed on a sale. Only one employee can be associated with one sale. This is the way Roles have been asssigned
David = Manager
Richard = Off1
Sean = Off2
James = Off2
Both Sean and James can have same Roles. Now I have created a parent child hierarchy for my employee dimension and the closure table. Defined the member key, ancestor key relationship in the parent child setting etc.
Now in the report when I pull the parent child hierarchy and the sales_amount in the report, it comes out perfect with all the ragged hierarchy resolved. But the issue comes when I try to limit the report on Role = Off2. It gives me an error saying " The layout of this view combined with the data, selection , drills resulted in no data. Undo drill and view prompt values". Basically what i want is to be able to select any role type and then my hierarchy should be adjusted to show me that data. Like when I select Off2, I want to see David at the Top level and Sean and James under him because they are both Off 2 and David is their manager.
Is that possbile? Also, am I getting this error because when I select Off2 though it gets Sean and James but since David is not Off2, I don't get the data?
I hope I was able to explain the issue, any help on this would be greatly appreciated.
Thanks
Ronny

So basically this means that if I build a parent child hierarchy on table A having the stucture like
--David (Manager)
-----James (Off1)
--------Bill (Off2)
and in my sales fact table for let's say today, I have only rows for Bill (Off2) because he is the only officer who did the sales today. Now when I will join my fact table to parent child hierarchy table A I will NOT get any data ? because there is no James who is the parent of Bill. So obiee need to have parent pulled off in the data (ANCESTOR) to be able to roll up the child.(IS_LEAF = 1)
I testes this and if my data only contains only rows for Bill (or I limit on ROLE = Off2) then it won't show the hierarchy. The query which OBIEE fires is to look for either ANCESTOR_KEY = NULL OR (DISTANCE = 1 AND ANCESTOR KEY IN (Bill). Therefore it doesn't I am wondering then what is the use of builiding the parent child hierarchy when we need to pull in all the ancestors (like in this case James for bill and David for james) because in real scenarios there can be cases wherein we would want to filter the data based on other dimensions to which the parent child hierarchy joins ?

Presentation Variable issue in OBIEE 11g

Hi,
I have 2 reports, report 1 and report 2
When i drill down on report 1 column 'Number of id's' will open the details report of Id's report 2
I am using a Presentation variable in report 2 filters (detail report) which is generated in Main report dasnbord prompt.
They have separate star schema.
Main report(reprot1) using Aggregated table.
Sub report(report2) using detail table.
Problem:
After upgradation from OBIEE 10.1.3.4 to OBIEE 11.1.1.5,(Unix server) The presentation variable value is not getting passed to the detail report. This is working completely fine in OBIEE 10g.
Is there any BUG in OBIEE 11g wrt presentation variable or do we want to change the configuration?
Thanks,
Satheesh

Hi,
Not sure about the behaviour in 11g, but we faced a similar issue in 10g while passing the presentation varaibles to detail report where main/detail report where coming from different subject areas. The behavior was a little unpredictable. To overcome this, we tried using request variable instead of presentation variable and it worked for us.
You can give it a try by doing the same and see if it works for you.
Thanks

Issue in OBIEE 11g Presentation service.

Hi All,
I found a problem in OBIEE 11g Presentation service, i.e., When i created an analysis with few columns in the criteria, it showed proper result, but when i deleted one column and then again add the same column in the criteria, result did not show the added column.
Anyone else find this issue?
Please share your views..
Regards.

On the left hand corner you will see list of views in the report, on a basic analysis you will see title and table view. Select the table view and click on edit ( pencil symbol ). A new page opens up, scroll down a little and you will see the columns included and columns excluded sections. Make sure the column that you are trying to add to the report is not present in the excluded list. If it is, drag and drop it above.
Answer points if question is answered.
Thanks,
-Amith.

Configuration issue related OBIEE 11G coreapplication_obips1

Hi All,
My issue is related to configuration of OBIEE 11g,
My installation is successful on windows server 2003, with Enterprise Install
but this coreapplication_obips1 is failing to configure anybody has any idea to resolve this,
Why this error is coming,
once I have uninstalled OBIEE 11g to resolve,
Thanks to all experts

Hi,
Not sure about the behaviour in 11g, but we faced a similar issue in 10g while passing the presentation varaibles to detail report where main/detail report where coming from different subject areas. The behavior was a little unpredictable. To overcome this, we tried using request variable instead of presentation variable and it worked for us.
You can give it a try by doing the same and see if it works for you.
Thanks

Download to excel issue.

Hi All,
When I download a report to excel, one of my percent field with one decimal place, is increased to two decimal places in excel.
does anyone of a work around or a fix to this issue?
Thanks

Checking the Oracle bug database there are the following bugs/enhancements logged that sounds relevant and some workarounds we can try:
Bug 865450 DOWNLOAD TO EXCEL ALWAYS OPENS AS HTML FILE
Bug 5592823 EXCEL DOWNLOAD TREATED AS HTML FILE BY MOZILLA FIREFOX 1.5
Enh 6906146 DOWNLOAD TO EXCEL 2000 OUTPUT SHOULD BE EXCEL FORMAT NOT HTML
Workarounds:
(1) If your server is Tomcat
(From bug log...)
The real issue is IE fails to to detect the file type correctly in some cases
in absence of proper MIME headers from the Tomcat servers especially on
Linux.
The fix is to
Add a mime-mapping in tomcat/conf/web.xml. Under the section
Default MIME Type Mappings
Restart tomcat and delete temporary internet files from IE
<mime-mapping>
<extension>xls</extension>
<mime-type>application/octet-stream</mime-type>
</mime-mapping>
(2) Switch browser to Firefox instead of IE. This sounds drastic but reading the bug logs it appears that Firefox will ask you what to use to open the file the first time it is used via Download to Excel - and at this point you can choose Excel and ask it to remember that decision.
Let me know if any of this useful. If not I'll drill further and see if I can dig up a better workaround.

Prerequisite checking issue during obiee 11g installation in windows server 2012

HI..
Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
can someone provide help to solve this issue..
Thanks,

HI..
Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
can someone provide help to solve this issue..
Thanks,

Download to excel Issue in obiee 11g (11.1.1.6.4)

Similar Messages

Maybe you are looking for