Download very slow since moving to BT

Hello,
I am currently on BT unlimited, I switched from Demon because of their FUP. We have an 8mb connection here, which would be used to the maximum speed getting up to around 800-900kbps download speed before switching to BT, now I'm limited to 240kbps, I have spoken to some people and was told to wait 10 days before making a post. Here is my router settings and the BT tester results. 
Thank you for any assistance.

your profile is stuck and need to contact mods for help 
contact mods
can take up to 3 working days for mods to contact you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Deployment very slow since moving to OWB 10.1.0.4.0 on new server

    We recently moved our OWB development from a Windows box running OWB 10.1.0.2.0 client/10.1.0.1.0 repository to a Linux box running OWB 10.1.0.4.0 client & repository. The other change was from using separate schemas for the design and runtime repositories, to a single schema for both repositories.
    Overall performance has improved significantly - designing and executing mappings for example. However, deployment of mapping objects is now taking considerably longer - around 5 to 7 minutes for a mapping that took 45 seconds to deploy on the old server. The initial and end stages of the deployement run quickly, but there's a gap of several minutes (with just a blank grey box displayed) between the 'Generation in Progress' and 'Object Compilation' dialogue boxes.
    Can anyone suggest what the problem might be, or anything we should be checking?
    The new server is an HP ProLiant DL380 G4, with dual Xeon 3.6 GHz processors, 4 Gbytes of RAM, and mirrored 2 x 146 discs. The Oracle files are held on an MSA1000 SAN.
    Thanks in advance for any help/advice
    Chris

    Hi
    Try to analyze the design and the runtime repository schemas.
    In Windows you can set memory for java in the owb client batch file.
    Check and modify it if it is exists in Linux too.
    Ott Karesz
    http://www.trendo-kft.hu

  • Problem description: My Macbook air runs very slow since installed Yosemite a few days ago  EtreCheck version: 2.0.6 (91) Report generated October 24, 2014 at 12:07:13 GMT 3  Hardware Information: ️ MacBook Air (13-inch, Mid 2012) (Verified) MacBoo

    Problem description:
    My Macbook air runs very slow since installed Yosemite a few days ago
    EtreCheck version: 2.0.6 (91)
    Report generated October 24, 2014 at 12:07:13 GMT+3
    Hardware Information: ℹ️
      MacBook Air (13-inch, Mid 2012) (Verified)
      MacBook Air - model: MacBookAir5,2
      1 2 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:15:57
    Disk Information: ℹ️
      APPLE SSD SM256E disk0 : (251 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 249.77 GB (28.85 GB free)
      Core Storage: disk0s2 250.14 GB Online
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Parallels Access.app
      [loaded] com.parallels.virtualsound (1.0.27 27 - SDK 10.6) Support
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
      /Library/Extensions
      [not loaded] org.virtualbox.kext.VBoxDrv (4.2.4) Support
      [not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.4) Support
      [not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.4) Support
      [not loaded] org.virtualbox.kext.VBoxUSB (4.2.4) Support
    Startup Items: ℹ️
      VirtualBox: Path: /Library/StartupItems/VirtualBox
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [invalid?] com.cisco.anyconnect.gui.plist Support
      [invalid?] com.oracle.java.Java-Updater.plist Support
      [running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
      [invalid?] com.teamviewer.teamviewer.plist Support
      [invalid?] com.teamviewer.teamviewer_desktop.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.cisco.anyconnect.vpnagentd.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [invalid?] com.oracle.java.Helper-Tool.plist Support
      [running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
      [loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
      [loaded] com.teamviewer.Helper.plist Support
      [invalid?] com.teamviewer.teamviewer_service.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
      [running] com.parallels.mobile.startgui.launchagent.plist Support
      [not loaded] org.virtualbox.vboxwebsrv.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Moveslink2 Application (/Applications/Moveslink2.app)
      Quicksilver Application (/Applications/Quicksilver.app)
      Google Drive Application (/Applications/Google Drive.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Dropbox UNKNOWN (missing value)
      EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Internet Plug-ins: ℹ️
      SharePointBrowserPlugin: Version: 14.1.3 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 Support
    Safari Extensions: ℹ️
      AdBlock
      OpenIE
      Facebook Photo Zoom
      Translate
      1-ClickWeather
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          7% WindowServer
          1% fontd
          1% Google Drive
          0% Microsoft Database Daemon
          0% AppleSpell
    Top Processes by Memory: ℹ️
      180 MB Google Drive
      86 MB mds_stores
      86 MB SyncServicesAgent
      86 MB Google Chrome
      86 MB Finder
    Virtual Memory Information: ℹ️
      2.25 GB Free RAM
      2.84 GB Active RAM
      2.56 GB Inactive RAM
      936 MB Wired RAM
      3.88 GB Page-ins
      74 KB Page-outs

    You have nearly run out of disk space.  Either purchase a larger one or start cleaning out the one you have?

  • Macbook Pro 2010 very slow since Mountain Lion!

    Hi!
    My Macbook Pro 2010 has become very slow since I installed Mountain Lion. How can I use OS X Lion again?

    Regardless of whether you think you need it, uninstall it and test to see if the slowness problem is solved.
    If it isn't put it back if you must, but there's no point trying to look for another cause till you've eliminated this one. You have a huge amount swaps which is what is causing your slowdown. 90% chance that's your AV software doing that.

  • HT1338 Mountain lion download very slow. 10 hours so far

    Mountain Lion download very slow. 10 hours so far

    It takes awhile.  Also, your ISP connection is part of the equation.
    Barry

  • My iMac is running very slow since updating to Maverick

    My iMac is running very slow since updating to Maverick. Also scrolling up & down on my mouse is backwards since updating. Any ideas?

    EtreCheck version: 1.9.12 (48)
    Report generated June 30, 2014 at 11:01:11 PM EDT
    Hardware Information:
      iMac (21.5-inch, Late 2009) (Verified)
      iMac - model: iMac10,1
      1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
      4 GB RAM
    Video Information:
      ATI Radeon HD 4670 - VRAM: 256 MB
      iMac 1920 x 1080
    System Software:
      OS X 10.9.3 (13D65) - Uptime: 0 days 5:6:45
    Disk Information:
      ST31000528AS disk0 : (1 TB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 999.35 GB (278.87 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      OPTIARC DVD RW AD-5680H 
    USB Information:
      Seagate Backup+ Mac SL 1 TB
      EFI (disk1s1) <not mounted>: 209.7 MB
      Seagate Backup Plus Drive (disk1s2) /Volumes/Seagate Backup Plus Drive: 999.86 GB (203.38 GB free)
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] com.leapfrog.codeless.kext (2) Support
      [not loaded] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0) Support
      [loaded] com.logmein.hamachi (1.0) Support
      [loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
      [loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
    Startup Items:
      HP IO: Path: /Library/StartupItems/HP IO
    Problem System Launch Daemons:
      [running] com.seagate.TBDecorator.plist Support
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.leapfrog.connect.shell.plist Support
      [running] com.logmein.hamachi.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
    Launch Agents:
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [running] com.logmein.hamachimb.plist Support
    User Launch Agents:
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.akamai.single-user-client.plist Support
      [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
      [loaded] com.google.keystone.agent.plist Support
    User Login Items:
      Monitor
      iTunesHelper
    Internet Plug-ins:
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0
      Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
      Default Browser: Version: 537 - SDK 10.9
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      Silverlight: Version: 4.0.51204.0 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
      Add To Amazon Wish List: Version: 1.8
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
      RealPlayer Plugin: Version: Unknown
    3rd Party Preference Panes:
      Akamai NetSession Preferences  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Growl  Support
    Time Machine:
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 930.71 GB Disk used: 670.99 GB
      Destinations:
      Seagate Backup Plus Drive [Local] (Last used)
      Total size: 931.19 GB
      Total number of backups: 88
      Oldest backup: 2012-12-28 20:31:23 +0000
      Last backup: 2014-07-01 03:00:07 +0000
      Size of backup disk: Too small
      Backup size 931.19 GB < (Disk used 670.99 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          2% WindowServer
          0% com.apple.WebKit.WebContent
          0% fontd
          0% loginwindow
          0% iTunes
    Top Processes by Memory:
      225 MB iTunes
      221 MB com.apple.WebKit.WebContent
      156 MB softwareupdated
      135 MB Safari
      119 MB com.apple.MediaLibraryService
    Virtual Memory Information:
      1.19 GB Free RAM
      2.02 GB Active RAM
      279 MB Inactive RAM
      529 MB Wired RAM
      751 MB Page-ins
      0 B Page-outs

  • Itunes app download very slow

    itunes app download very slow&iphone

    Close and relaunch iTunes.
    Reboot the computer.
    Power cycle the router/cable modem.

  • Hello. My iPhone 4s is very slow since the iOS 8 update. Is anyone else experiencing this or please can anyone help?

    As per the title, my iPhone is very slow since the update, plus my husband's phone is experiencing the same issues. There is plenty of available space. Hope you can help.

    iOS 6 works just fine on my 4S and everyone else's that I know.
    What have you done to troubleshoot your issue?
    Have you taken the basic troubleshooting steps clearly outlined in the iPhone User guide?

  • My computer has been getting the pin wheel and moving very slow since the i downloaded yosemite

    Whenever i have a video playing from my internet browser it causes my computer to pin wheel and go into thinking mode with all of my apps that are open. It moves very slow and i have to force quit everything and reboot my computer to make it act normal. this all started after the software update. Any suggestions>

    Mine has been moving extremely slow, too.  I had a problem downloading and installing Yosemite and after many conversations with Apple Care, the solution was to remove the 3rd party RAM I had just installed prior to the upgrade.  That solved the download/install problem, but now it's slow as anything.  I opened my activity monitor and sure enough, the memory pressure is at full load so I have to install more memory.  The trick is to make sure it's truly compatible.
    Have you checked your activity monitor's memory report?

  • 10.5.8 & Page loading...now VERY slow since upgrade

    I'm continuing to fight a very slow pageload problem since upgrading to 5.8. It appears to be a DNS like problem. Ping times to both my router and known servers on the Internet are fine, 72ms for pings across a set of routers, that traceroute fine. However, all pages on my browsers, whether Safari or Firefox are now much slower than before the upgrade. I now routinely wait 15 to 20 seconds to load pages that take Vista only a few seconds to load. To be clear, my Vista computers are fine. No load problems at all. Everything else seems to be normal.
    As a test, I ran the Speakeasy Speed test on my connection, download of 1335 kbps, 745 kbps up. So the bandwidth seems to be there, per usual. It's the same on my Vista machines.
    I looked on the board, and couldn't find any similar issues. Anyone seen this? Is a reinstall the only way back? Or is this something that is DNS oriented? I show my router xxx.xxx.xxx.1 as my DNS pointer in Airport.
    Other ideas:
    - Related to IPV6?
    -Related to the AirPort Extreme card or it's 1.4.16.2 firmware?
    - Firewall at this point is allowing all incoming connections.
    Thanks in advance...

    Same type problem. Starting two weeks ago, it is taking between 15 and 20 seconds to load any page, even my google homepage. Same with Safari and Firefox. Reset browser, cleaned out all cookies and cache, dumped and reloaded browser. Speed test shows connection speed to 5.8 mbps on a nominal 6mbps connection, so that's not the problem. Disconnected power and reset modem twice.

  • ITunes App Store Australia download very slow

    iTunes app store in Australia has had VERY slow download ALL day. Any suggestions.

    rmau61 wrote:
    iTunes app store in Australia has had VERY slow download ALL day. Any suggestions.
    contact apple support to see what is going on -- there have been complaints about Icloud servers and mail - so hazarding a guess that they have a problem somewhere between you and them.  Weather (storms) can cause an internet connection to be slow - or have to be rerouted in the system causing a traffic jam somewhere along the line.    Generally - in the US I check the national weather service map and if there are storms in certain areas I give it up for the day as its just not going to connect.

  • G4 Powerbook VERY slow since update

    I've been using Macs for many, many years and this one is just BIZARRE.
    I updated software this morning on my G4 Powerbook. The updates included the latest iTunes (7.4.2) and a compatibility update for QuickTime 7.2. During the update, my machine got VERY slow. Simple things like opening my documents folder took a minute or two (accompanied by the famous Apple Beach Ball). I had Safari, Graphic Converter and Software Update running, so I figured I was just taking on too many tasks at once. It took nearly fifteen minutes to quit Safari and GC and allow the update to run without competing for RAM or processor capacity. Eventually, SU finished, but it failed to update iTunes.
    Rebooting my computer took more than 45 minutes. Here is what I've tried since then to "unclog" my system:
    1. Checked HD space. I've used about 65% of my 80GB HD. Nowhere near empty, but should not cause the problems I'm experiencing.
    2. Launched Activity Monitor to see what's going on. Both RAM and Processor graphs fluctuated in the 25% used area. Plenty of capacity there. Also checked processes running to see if something undesirable was running in the background. No clue there, either.
    3. Launched Disk Utility and repaired permissions. Also launched Terminal and performed periodic daily, weekly, and monthly tasks, as well as updated prebindings. No noticable change there.
    My computer DOES still work. It just runs EXTREMELY slow motion. I've never seen anything like it. Right now, I'm trying to get the Powerbook to launch as the Firewire Target Disk on my G4 iMac. If that works, I can perform a sync in preparation to re-install the OS (I have the two machines synced already, but it's been a couple of weeks since the last one). Also, after the sync, I can try to run some diagnostics on the Powerbook from the iMac. However, rebooting in Target Disk mode has taken more than 2 hours so far. It's not locked up (still have the spinning startup circle on the blue backgroound) but I'm not getting anywhere fast.
    Anyway, I'm kind of at a loss here. Does anyone know what might cause this sort of bizarre behavior in my mac? Would love to know how I can fix it.

    My dad's laptop has the same problem. It takes 4 minutes to start it up. Then he gets the spinning beach ball a lot. The balls shows up when he types on the ichat or looking on the internet. I don't have all the symptoms since he is in Canada and I'm in Florida. I made him do the REPAIR PERMISSIONS and it didn't change anything.
    I would like to know about the BATTERY comment?? What does a BATTERY has to do with slowing down? I am not implying that it's wrong, I just don't understand it and I am curious about it.
    The laptop is about 4-5 years old and if there is a connection between SLOW and BATTERY I would like to know more.

  • Macbook Pro running VERY slow since Yosemite, why?

    Ever since I installed Yosemite my Macbook Pro 2010 has been extremely laggy and slow. It's especially noticeable with several applications running but even without, it is very slow to respond to commands.
    What's the problem and how do I fix it?
    Thanks

    Here are a few lines from the log messages, I double clicked on a music file which launches iTunes, the problem was at its worst while doing this:
    20/11/2014 2:25:23.799 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 50, fd 69, ErrLogCount 13 ResolverIntf:5
    20/11/2014 2:26:09.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    20/11/2014 2:26:09.000 am kernel[0]: Previous sleep cause: 5
    20/11/2014 2:26:09.076 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 50, fd 40, ErrLogCount 14 ResolverIntf:5
    20/11/2014 2:26:09.000 am kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
    20/11/2014 2:26:09.000 am kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    20/11/2014 2:26:09.000 am kernel[0]: en1::IO80211Interface::postMessage bssid changed
    20/11/2014 2:26:09.196 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv4 listener multicast send failed en1, 50
    20/11/2014 2:26:09.196 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 50
    20/11/2014 2:26:09.197 am sharingd[264]: 02:26:09.196 : SDStatusMonitor::kStatusWirelessPowerChanged
    20/11/2014 2:26:09.205 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 42, ErrLogCount 15 ResolverIntf:5
    20/11/2014 2:26:09.205 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 16 ResolverIntf:5
    20/11/2014 2:26:09.206 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 17 ResolverIntf:5
    20/11/2014 2:26:09.206 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 18 ResolverIntf:5
    20/11/2014 2:26:09.207 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 19 ResolverIntf:5
    20/11/2014 2:26:09.208 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 49, fd 40, ErrLogCount 20 ResolverIntf:5
    20/11/2014 2:26:09.208 am discoveryd[54]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 10.1.1.1 Port 53 errno 51, fd 40, ErrLogCount 21 ResolverIntf:5
    20/11/2014 2:26:09.210 am configd[30]: network changed: v4(en1-:10.1.1.3) DNS- Proxy-
    20/11/2014 2:26:09.210 am UserEventAgent[21]: Captive: CNPluginHandler en1: Inactive
    20/11/2014 2:26:09.212 am discoveryd[54]: Basic Warn DD_Warn: Corrupt NSEC RDATA size
    20/11/2014 2:26:09.212 am discoveryd[54]: Basic WABServer NetResolverEvent no resolvers, resetting domains
    20/11/2014 2:26:09.213 am networkd[162]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
    20/11/2014 2:26:09.219 am discoveryd[54]: Basic Bonjour Failed to delete registration recordId=309 error=4
    20/11/2014 2:26:09.466 am com.apple.iCloudHelper[2560]: objc[2560]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
    20/11/2014 2:26:09.478 am com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    20/11/2014 2:26:09.499 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    20/11/2014 2:26:09.499 am discoveryd[54]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    20/11/2014 2:26:09.569 am sharingd[264]: 02:26:09.568 : SDStatusMonitor::kStatusWirelessPowerChanged
    20/11/2014 2:26:09.583 am sharingd[264]: 02:26:09.582 : SDStatusMonitor::kStatusWirelessPowerChanged
    20/11/2014 2:26:09.000 am kernel[0]: MacAuthEvent en1   Auth result for: 78:a0:51:4d:ed:5c  MAC AUTH succeeded
    20/11/2014 2:26:09.000 am kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    20/11/2014 2:26:09.000 am kernel[0]: AirPort: Link Up on en1
    20/11/2014 2:26:09.000 am kernel[0]: en1: BSSID changed to 78:a0:51:4d:ed:5c
    20/11/2014 2:26:09.000 am kernel[0]: en1::IO80211Interface::postMessage bssid changed
    20/11/2014 2:26:09.000 am kernel[0]: AirPort: RSN handshake complete on en1
    20/11/2014 2:26:11.515 am networkd[162]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
    20/11/2014 2:26:11.515 am UserEventAgent[21]: Captive: [CNInfoNetworkActive:1709] en1: SSID 'Leon Head' making interface primary (cache indicates network not captive)
    20/11/2014 2:26:11.516 am configd[30]: network changed: DNS* Proxy
    20/11/2014 2:26:11.516 am UserEventAgent[21]: Captive: CNPluginHandler en1: Evaluating
    20/11/2014 2:26:11.518 am UserEventAgent[21]: Captive: en1: Not probing 'Leon Head' (cache indicates not captive)
    20/11/2014 2:26:11.518 am UserEventAgent[21]: Captive: CNPluginHandler en1: Authenticated
    20/11/2014 2:26:11.526 am configd[30]: network changed: v4(en1!:10.1.1.3) DNS+ Proxy+ SMB
    20/11/2014 2:26:11.000 am kernel[0]: en1: BSSID changed to 78:a0:51:4d:ed:5c
    20/11/2014 2:26:11.551 am sharingd[264]: 02:26:11.550 : SDStatusMonitor::kStatusWirelessPowerChanged
    20/11/2014 2:26:11.556 am networkd[162]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
    20/11/2014 2:26:11.568 am discoveryd[54]: Basic Bonjour Failed to delete registration recordId=317 error=4
    20/11/2014 2:26:16.344 am ntpd[157]: wake time set -0.274607 s
    20/11/2014 2:26:32.000 am kernel[0]: MacAuthEvent en1   Auth result for: 78:a0:51:4d:ed:5c  MAC AUTH succeeded
    20/11/2014 2:26:32.000 am kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    20/11/2014 2:26:32.000 am kernel[0]: AirPort: RSN handshake complete on en1
    20/11/2014 2:26:32.000 am kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 78:a0:51:4d:ed:5c

  • Is there a fix for Mail running very slow since upgrade to 10.8

    Mail is running extremely slow since upgrade.  Open New Message window (or auto link to new email from another applicatin), click on outgoing email address field and begin to type.  Takes 15-30 secods per letter in the address to populate the field.  Click SEND and it takes up to 2 minutes to send... another 3 minutes to show up in SENT mailbox.  Sometimes completely chokes and have to Force Quit.  Have already run Disk Utility (Permissions and Directory Corruption Diagnostics and Repair), have Rebuilt the Mailboxes, have reinstalled OS 10.8 from Recovery partition.  IT IS STILL CHOKING, HANGING, AND NOT FUNCTIONING NORMALLY.  Any Ideas ??? Please help!

    I have my 'Check for New Messages' set to 'Manually'.  This is a problem with setting up a New Message to send out.  I did go into settings under Composing Tab and unchecked "Automatically Complete Addresses".  This has resolved the issue of the spinning beachball when attempting to enter an email address into the "To:" field.  So, it is running at normal speed now, but I suspect there s a bug related to that setting... something that is causing a very slow background search through existing address book directory for recognizable email addresses to 'auto fill' in that field.  I have already trashed preferences for both Mail and Address Book and that did not resolve the issue, so it must be something else.  I can live without Auto Complete.  Thanks for the input!

  • Macbook Pro VERY SLOW since mavericks! Please Help!

    My Macbook pro is a late 2012 model, 2.3GHz Intel Core i7 with 4GB ram
    Ever since upgrading to mavericks, it has slowed down immensely! It was never this slow or buggy with Mountain lion
    It takes a good 2 minutes to load mail, finder is very buggy - it will take a good minute to load a photo - which was not normal
    I also run Adobe CC design software - and it is very very slow
    Safari is extremely slow and buggy, and sometimes shows screens as below:
    I was going to upgrade to 2x8GB ram which will be 16GB of ram - will this solve the problem?
    Should i upgrade to yosemite? will these problems be fixed please?
    I have tried asking the Apple Outlet here in Malta but they are of no help at all, don't know where else to ask!

    My Macbook pro is a late 2012 model, 2.3GHz Intel Core i7 with 4GB ram
    Ever since upgrading to mavericks, it has slowed down immensely! It was never this slow or buggy with Mountain lion
    It takes a good 2 minutes to load mail, finder is very buggy - it will take a good minute to load a photo - which was not normal
    I also run Adobe CC design software - and it is very very slow
    Safari is extremely slow and buggy, and sometimes shows screens as below:
    I was going to upgrade to 2x8GB ram which will be 16GB of ram - will this solve the problem?
    Should i upgrade to yosemite? will these problems be fixed please?
    I have tried asking the Apple Outlet here in Malta but they are of no help at all, don't know where else to ask!

Maybe you are looking for

  • Has nokia stopped anna updates on Nokia N8 due to ...

    I have once updated two N8 to anna but am failing on this one.has nokia stopped anna updates because of the upcoming belle release?

  • Not seeing menu template in front of background video clip

    When I put my video clip in the editor for a background and pick the tutorial main menu template, I do not see the diagonal lines in the editor, only buttonsfrom the template. So , I am not seeing the template in front of my backround clip.

  • How to handle area code split

    It's looking like the phone company is going to split our area code in the next year or two.  This is because there are not enough numbers left, so there's a good chance that one part of the geographical area using the current area code will be assig

  • Translate system errors in APEX

    Hello, how to translate system errors, such as "Session state protection violation ..." other languages?

  • Itunes will not sync with ipod touch

    itunes is installed with the latest version of itunes. all of a sudden, itunes will not sync with my ipod, itunes sees it, when i click to sync it goes through the motions, but never syncs. I get no messages or errors, it just never syncs. the ipod i