Download VoiceOver Kit through a Proxy

Hi,
do you know any way to download last VoiceOver Kit through a proxy server? I can't connect directly to internet but only through a proxy server.
I con't connect to internet with my proxy, iTunes can browse iTunes Store, but when iTunes try to download VoiceOver kit for my iPod Shuffle 3G an error message appear.
Thank you.

If you did not receive a separate config file and you are using the one installed by default, you are using the "Serial Number Only" hosting option. This is the most basic option -- licenses are hosted at Adobe, but there are no options for customization. With the "Adobe Hosted" option, licenses are also hosted at Adobe, but more advanced configuration options available. Please check with the individual who has access to the Licensing Website to find out which hosting option was selected.
No, unfortunately there is not a way to store the proxy credentials through any of the setup tools.

Similar Messages

  • Silently Download e-Licenses through a Proxy?

    Regarding Acrobat 8 Standard:<br /><br />It appears that my workplace could silently download e-licenses using <LicenseDownloadOptions> in the config file... <br /><br />BUT...<br /><br />a) My config file doesn't *HAVE* a <LicenseDownloadOptions> section!  Can I just insert it? Where?<br /><br />AND...<br /><br />b) We have to go through our proxy server (which does require authentication) to get to the Internet.  The settings and credentials are stored by IE, but Acrobat's post-install e-license downloader trips over it and asks for credentials anyway.  Is there any way to accomplish a silent e-license download through this type of proxy server?<br /><br />Many thanks,<br /><br />Sheree

    If you did not receive a separate config file and you are using the one installed by default, you are using the "Serial Number Only" hosting option. This is the most basic option -- licenses are hosted at Adobe, but there are no options for customization. With the "Adobe Hosted" option, licenses are also hosted at Adobe, but more advanced configuration options available. Please check with the individual who has access to the Licensing Website to find out which hosting option was selected.
    No, unfortunately there is not a way to store the proxy credentials through any of the setup tools.

  • Message error 9006 while downloading voiceover kit for ipod shuffle

    I've followed apple's istructions, but this message is still appearing. Why?

    That can sometimes happen if an earlier version of the software hasn't uninstalled.
    Is there an earlier version of the VoiceOver Kit currently showing up in your Uninstall a program control panel?

  • Win 7 x64 + iTunes 9  VoiceOver kit won't install

    I have iTunes9, upgraded from iTunes8. When installing iTunes8 I have changed default location from Program Files(x86) to Program Files - based on the warnings about iTunes8 and Win7 I found on the internet. This version worked flawlessly. So the upgrade automatically went to the same folder for 64bit applications which iTunes9 claims to be, although it, unfortunately, isn't.
    The problem is when installing VoiceOver Kit - it downloads within iTunes, Windows pops up UAC windows asking for permission which is then granted and boom - nothing happens. The tickmark next to do VoiceOver is disabled again. When trying to repeat, installation starts, this time without downloading but the result is the same or eventually iTunes crashes. After restart and selecting VoiceOver iTunes starts downloading VoiceOver kit again.
    Is there a workaround? Is it possible to install VoiceOver manually? Why it is not included in the iTunes download package in the first place? (ok, this last one is rather rhetorical). And at last - do you think that uninstalling iTunes and installing it again to the default folder for 32 bit applications would help?
    Thank you!

    When do I learn to follow instructions properly? I have uninstalled everything from Apple, restarted and then reinstalled iTunes, this time heeding to the last sentence of your post: "This applies even if you're already logged into an administrator account." - and voila - VoiceOver installed smoothly this time. I am syncing/charging my iPod now but I am sure it will work.
    Running as administrator has been mentioned in some other issues previously, but I always assumed that since I am logged into administrator account, what difference does it make. Heavens it does! (I originally wrote h-ell it does, but Apple banned that word from its forums. I am not a native speaker and I know it is not a nice place to be in, but I didn't know it is such a bad word either.)
    Thanks for the hint! And a lesson
    PS: The moment Apple will finally start support my language (Slovak) in its products - and I don't mean full localization, just the ability to write and to transfer such files - I am switching, I swear. They are moving on the track, release after release, but they are just not there yet.

  • Adobe Reader 9.0 has delay when downloading PDF file through proxy server

    There is an issue with the Adobe Reader (and Acrobat) 9.0 PDF Link Helper ActiveX control for Internet Explorer (6 or 7) on Windows computers with respect to proxy servers. Due to this issue, there is a 2 minute delay for any Internet Explorer web browser on the Deere network before any PDF file will open from the Internet within the IE web browser if In-Place activation (Display PDF in Browser) is enabled in Adobe Reader 9. This problem does not affect Adobe Reader 8.
    What we are seeing is that when someone on the Deere network clicks on a links to a PDF file in the Internet, the PDF file downloads immediately. But then, after the PDF file is downloaded, the Adobe Reader 9 PDF Link Helper ActiveX control tries to talk directly to the Internet web site. The Adobe Reader 9 PDF Link Helper ActiveX control does not know how to negotiate our proxy server. So after a minute or two, the Adobe Reader 9 PDF Link Helper ActiveX control times out (gives up) and allows the IE browser to display the downloaded PDF file in the IE browser.
    We work around this issue by disabling In Place Activation for PDF files in IE (uncheck Display PDF in Browser). But we would like a fix for the PDF Link Helper ActiveX control.
    [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\Originals]
    "bBrowserIntegration"=dword:00000000
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Originals]
    "bBrowserIntegration"=dword:00000000
    Here's what our proxy people see when they do a trace of a PDF file download through their proxy server with IE 7 and Adobe Reader 9 with Display PDF in Browser checked.
    The browser tells the proxy to download the pdf, it does and sends it to the browser. Before the browser opens it something in Acrobat ( or I.E. ? ) tries to make a connection back to the content server that hosted the pdf. Unfortunately this agent does not ask the proxy to make the request for it, but rather asks local DNS to resolve the Internet server name. This request dies because our internal private network does not know anything about the Internet. Only the DNS used by the proxy can resolve Interent names. After two unsuccessful DNS queries into the private network, the agent tries to resolve the same Internet name with NBNS ( netbios name service) queries again into the private network, with the same results. These requests persists for more than two minutes ( over 200 unresolved queries ). Then for whatever reason the agent gives up and the already downloaded pdf file loads into the browser.
    I have a TCP capture file if you want it.

    Hi,
    I have the same problem with some specific PDF files. For more than 90% it hangs when opening the file, but sometimes it works (with the same file).
    The workflows where it sometimes worked:
    a) Loading the PDF, the reader is started the first time and displays license dialog.
    b) The reader was already runing and file is loaded with Drag&Drop or File/Open in the Reader
    But most times it does not load.
    I could not find out which file is missing or trying to be opened. So I tried with the CP949.TXT.
    I found no CP949.TXT in Reader 8 installation, so I took it from the link, pasted into notepad and stored in the respective directory
    C:\Program Files (x86)\Adobe\Reader 9.0\Resource\TypeSupport\Unicode\Mappings\win\
    Now it seems to work fine, opening PDFs with double click from exporer.
    But why did Adobe Reader 8 not have the TypeSupport directory at all?
    Even when having found a fix (hack?), I think I did not understand the cause of this problem.
    Regards,
    TheLastReader

  • Since I've downloaded and installed OS X Mavericks I cannot browse from Safari through the proxy server except for Apple's site

    I have a brand new MBP 15" Retina display. Decided to download and install OSX Mavericks before I did any other setup. However since I've done this installation the only website I seem able to browse is Apple's. Google just keeps coming up not able to connect through the proxy. I still have tons to do and need to be able to access a number of websites. I also cannot get to the App Store.
    Does OSX Mavericks have an issue with proxy servers?
    I am writing this on my MBP 13" Retina display on which I have NOT upgraded to OSX Mavericks and I am having no issues at all.
    Help please?

    System Preferences / Security & Privacy / General tab / Allow apps downloaded from:
    Change the settings.

  • Voiceover kit will not install 1603 error win8

    Voiceoverkit will not install. Error code 1603. Running Win8. iTunes 11.0.5.5

    Hello tzachman,
    Thank you for using Apple Support Communities!
    It sounds like you are getting an error message when trying to get the Voiceover kit to install.
    I found an article that seems to address this error code specifically named iTunes: Specific update-and-restore error messages and advanced troubleshooting found here http://support.apple.com/kb/TS3694#error1603
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts
    Here is the troubleshooting from the 1604 section that it references:
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Take care,
    Sterling

  • ITunes was unable to install the VoiceOver kit.  An unknown error occurred (1260).

    I now get this error after getting the latest version of iTunes on 2/2/2015.
    I have a 4th gen shuffle.
    I've tried restarting the computer.  I've tried getting the latest Microsoft updates.  Nothing works.
    Is there a log I can check for more information on this error?

    Hey!
    I have the same problem but with different specs.
    I'm using the latest OS X Yosemite 10.10.
    And also the latest iTunes version 12.1.0.50.
    When I enable the VoiceOver on my iPod shuffle, the language dropbox is not accessible.
    Then, it prompts the terms and conditions and also the details of the VoiceOver kit version, and it says the new update has now support for OS X Lion... But I'm using Yosemite...
    Then, I get the annoying error 1701...
    Already tried to uninstall the VoiceOver kit framework, but no success... Already restored the iPod, no success. I've been searching all over the web and this used to be a problem but it was solved with a OS X Lion update... Well, we have Yosemite now, it's about time to come up with a fix!
    Does anyone have any suggestions to fix this? Maybe someone using Yosemite with the VoiceOver kit working, could copy the framework file and let us download and replace ours, to see if it's any good... Other than that, really dunno what to do...

  • VoiceOver Kit error occurred (1701)

    I've received a messege to update the VoiceOver Kit to iTunes and iPod Shuffle, the system is downloaded but shows the message below when it is prepared to be installed. Then How can I solve this problem?
    "ITunes was unable to install the VoiveOver Kit. An unknown error occurred (1701)."
    ITunes version: 11.1.2 (32) 64-bit
    IPod Version:1.0.1
    OS X Mavericks

    Problem solved here! OS X only.
    Solution for Voiceover kit installation issues. Errors 1260 and 1701. [MAC Only]

  • How can I install ff through a proxy???

    For some reason, I must access the internet through a proxy server. But during the ff's installation, there is not any optional configuration to indicate the installation program how to access the internet. Then the installation fails again and again.
    So, you mean, we guys, who must access the internet through a proxy server, should not use your product?

    I don't know about trying to actually install Firefox thru a proxy, but after you download and install Firefox you can setup your proxy parameters like this.
    Tools > '''Options''' > Advanced - Network > Connection = Settings <br />
    Setup your Proxy settings in that pref window.

  • How to manage VM servers in DMZ through NAT proxy?

    Dear all,
    We need to build some VM servers in DMZ network. And the OVM Manager is located in trust zone (behind DMZ). OVM manager can connect to the DMZ vm servers through NAT proxy. But, there are some errors after I have added the servers.
    In fact, there is no management network for OVM manager. So, I seem no workaround.
    Have you any idea about this deployment?
    Mike

    mtktang wrote:
    We need to build some VM servers in DMZ network. And the OVM Manager is located in trust zone (behind DMZ). OVM manager can connect to the DMZ vm servers through NAT proxy. But, there are some errors after I have added the servers. We do not support Oracle VM Server via NAT, because the Servers get the IP address of the Manager to connect to (and not the NAT'd address). So the API python binding download and notifications will fail. It is very unlikely that this would work.

  • Can i listen to the track name and artist in my iphone like ipod shuffle using voiceover kit?

    Hello People,    
    My question is, can i listen to artist and track name on my iphone 4s like Ipod shuffle using voiceover kit?
    Thank You.

    I have an Alpine radio with an iPod dock adapter to let me control my iPod through my head unit. This had worked great with my Nano, but I heard that these adapters didn't work well with the iPhones. Mostly due to interference / feedback from the phone being heard through the speakers.
    However, I was suprised at the compatiblity mine had with the iPhone, especially being that it is a couple years old (the apadpter). When you plug the iPhone in it says that the device may not be compatible with the iPhone and that you should put the phone in "airplane mode." I just kept my nano plugged in as I thought that I didn't want the equivalent of turning my phone OFF when driving, so one day I tapped NO. Well, to my suprise, I did not hear any feedback or interference through my stereo. And, In fact, While I was driving, I received a call and the music stopped and the phone rang!
    So, your mileage may vary on whichever brand adapter you use, but I have found that it works just fine for me. Hope this helps.

  • Voiceover kit wont install completely

    I just finished syncing my iPod Shuffle (4th Gen) and the voiceover feature isnt working. I tried to apply the voiceover and downloaded the kit however once installing the kit the progress bar filled about half way and then just disappeared and the voiceover box was unchecked again. Ive made sure to download any updates and it still wont work. Do any of you know if the voiceover kit will work with Windows 8? Does that even matter? PLEASE HELP!!!

    I found my answer!! Thanks to a user named Herculator!
    Herculator
    Currently Being Moderated  Re: Can't enable VoiceOver
    Oct 13, 2010 12:09 AM (in response to usamytch)
    Ok, I was able to fix this. The solution in a nutshell is to have iPodVoiceOver.dll installed in the (whatever drive letter):\program files\itunes directory. Where all the other dll's are. For example, I use windows 7 64 bit and have itunes installed on the c drive but my library is located on an external drive (f:) Itunes was able to download the voiceover kit but it copied it to my c: root directory. I moved it over to c:\program files\itunes and voila it worked. I connected the shuffle and started itunes and it installed the kit to the shuffle. I'm now able to check and uncheck the voiceover feature and it works perfectly fine

  • Voiceover kit refuses to install with an error 1701

    Updated recently to Mavericks 10.9 and Itunes 11.1.2. I bought a new iPod Shuffle (4th Gen) and the first sync, the voiceover kit failled. I tried restoring the iPod several times; I tried getting rid of the existing VoiceOver file in the Library. The new Voiceover kit still refuses to install with an error 1701.
    It is hard to understand why itunes and mavericks are not comptatible with the ipod shuffle ...

    this is what i said to them
    okay, so im pretty sure that apple is aware of this issue by now.
    The voiceover kit isnt downloading withint itunes on mountain lion or on mavericks it returns a 1701 error like it carnt find the server to download it from.
    SERIOUSLY sort it out,and fast, this is just slack.
    I purposefully bought this new shuffle over my last purely for this feature and guess what, straight out of the box it doesnt work...
    you guys are slipping

  • SSO implementation through IIS proxy

    I am  implementing SSO through IIS proxy. when I tried add the iis_sso.dll to IIS ISAPI filters tab, Its showing red color(which says that it is inactive). Please tell me how to make it green (Active).

    Ramesh,
    Which version of EP? I am assuming as well you have IIS 6.0? Also, ISAPI.dll is no longer supported.
    James

Maybe you are looking for

  • Install missing plugins error while opening forms in EBS R12

    Hi, I installed EBS R12 in my desktop through vm ware. my host os is windows xp and my guest os is oel 5.3. Now when i am trying to open any form based window through OAM in firefox browser, install missing plug ins error occurs. How can i open forms

  • Work flow in Material Master

    How to configure work flow for Material Master creation or change?

  • SSL on Oracle HTTP causes errors in IE 6/7/8

    Hello, We installed new SSL certificate on Oracle HTTP server (Centos, Linux, Oracle 10g) and getting an error in IE 6,7,8: res://ieframe.dll/dnserror.htm#https://... Examining http headers provide following error description: ERROR_INTERNET_SECURITY

  • OWB Release 10.2.0.1.0 instalation on  Oracle Release 9.2.0.1.0

    Hi All, When i try to create OWB repository with Repository assistant i get the following error : ORA-22905 cannot access rows from a non nested table iteam ORA-06512 at line 17. My environment details are as given below. O/S : Windows 2000 Oracle: R

  • Performance Problem..DBMS_XMLStore or SQL Loader

    Hi All, I have implemented the insertion of data using the following method but it's taking very long. Once XML and XSL files are there in mapped 'Directory_Path'.... BEGIN SELECT directory_name INTO v_directory_name FROM all_directories WHERE owner