Download Windows Server Enterprise 2008 32 bit

I need an install for Windows Server Enterprise 2008 32bit.  I am taking over a contract and the previous techs did not setup the licensing site to download the software.  When I go to the licensing site to setup the account and retrive our software
it is asking for a license number and authorization number.  I called microsoft and they are asking for the same.  I called the vendor we purchased the software and licensing and they cannot track down the transaction. What I have is the product
key and have confirmed with Microsoft this key can be used for both 64bit and 32 bit.  All I need is the Windows Enterprise 2008 32 bit install CD or iso.  Please assist.

Hi,
Please visit link to download ISO:
http://www.microsoft.com/en-ie/download/details.aspx?id=837
In terms of your Licensing portal and agreement/Auth number, Please visit the below website and call your local licensing provider, but this time request a site name search for your site name (Company Name or Client Name) for all License agreement information,
this will require the client company (customer) to put this on a letterhead page and signed by an official and faxed to microsoft before they will authorise the search, Its lengthy process but worthwhile if there are lots of licensing agreements in the balance.
https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
Best Regards,
M
If you find my information useful, please rate it. :-)

Similar Messages

  • Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

    I recently installed Windows Server 2012 R2 64-Bit.
    We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
    the Easy Print driver.
    And I was right, using the Easy Print driver, I got the following result:
    And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
    And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
    Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
    not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
    So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
    32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
    Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
    Andy

    Hi Bulent Sahin,
    Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
    It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
    Thank you Mr. Sahin

  • Trying to download windows server onto my computer.

    I was able to burn an ISO for Windows Server 2012, but every time I try to download it says either my pc has encountered a problem and need to shut down or it issues a compatibility report. I follow the directions for report and then my computer reboots.
    Could my computer not be able to handle it?

    Hi, 
    Do you mean that you cannot download Windows Server 2012 ISO file on your computer? If so, please try the link below to see if the ISO file could be downloaded correctly:
    Download Windows Server 2012
    http://technet.microsoft.com/en-us/evalcenter/hh670538.aspx
    In the meantime, please provide the detailed information of the error message when you download the ISO file.
    Regards,
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Forms and Reports 6i on a Windows 7 Enterprise Edition 32 Bit.

    Hello,
    I am trying to install oracle forms & reports 6i on a Windows 7 machine. Windows 7 Enterprise Edition 332 Bit
    Kindly guide me if Oracle certifies Forms and Reports 6i on Windows 7 machine.
    Please also tell me any link where I can find genuine documentation for this as we need to make a decision.
    Regards

    I'd go and have a hunt around here http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html
    You'll see this is to do with 10gR2 - I don't know whether you'll find anything on 6i as I don't think it's supported anymore.
    Oracle are never going to develop 6i as it's now 3 versions behind : 11g 10g 9i 6i ....
    Metalink would be the place to look.

  • Downgrade SQL Server Enterprise 2008 edition to the Developer 2008 edition

    Can we downgrade SQL Server Enterprise 2008 edition to the Developer 2008 edition? If yes, then can this be done in-place?

    No there is no in-place downgrade.
    check these blog -
    http://www.mssqltips.com/sqlservertip/3079/downgrade-from-sql-server-enterprise-edition-to-standard-edition/
    http://sqlserverstore.blogspot.co.uk/2013/12/how-to-downgrade-sql-server-2008-r2.html
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • CF 7.02 won't install ond Windows Server Enterprise 2003, Service Pack 1, IIS 6.0

    CF 7.02 won't install on Windows Server Enterprise 2003,
    Service Pack 1, IIS 6.0. When I run the Administrator the message
    indicates that MX has been installed but when I open the page with
    the web browser the message is Service Unavailable.

    I get the message when I open try to load ColdFusion
    Administrator page or the index page on the cold fusion web site
    that I am installing.

  • Linked Server SQL 2008 64 bit Windows Server 2008 64 bit

    Hello there,
    I'm trying to access my customers Oracle database with a SQL Linked Server. The error I get is:
    Cannot create an instance of OLE DB provider "OraOLEDB.Oracle" for linked server...
    I did the following steps:
    1. Installed Oracle client 10g with a custom installation and selected everything.
    2. Created a tnsnames.ora
    dev =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = dijkora01)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = dev)
    3. Tested this with tnsping dev, which said that the connection is OK.
    4. Activated 'Allow inprocess' for my OraOLEDB.Oracle provider for the linked servers in my SQL Server Management Studio.
    5. Created a new linked server with:
    Linked Server: IAP
    Provider: Oracle Provider for OLE DB
    Product name: Oracle
    Data source: dev
    In the security tab I activated 'Be made using this security context'. When I now press 'OK' I get the above error message.
    Can someone help me with this?

    Windows 7 Enterprise 32-Bit
    Installed the version 12 for 32 bit ODAC and it worked. The key is to Install as Administrator once it is unzipped.
    Was able to set up Listener then
    Was able to set up ODBC using the ODAC. Connect MS Access 2010 to the Oracle views.
    Then, tried to install the 64 Bit onto Windows 2008 Server.
    It locked up during installation both times.
    Installed ODAC without an error.
    However, the ODBC setup will not provide a list of the servers in the ODBC  TNS Service Name listbox for Server 2008.
    In Windows 7, it populates the TNS Service Name.
    The list box in Windows 2008 is empty.
    Do you know what would cause that?
    The .ORA file scrips look the same on Windows 2008 as they do on Windows 7 except it does not have the (server = Dedicated) argument.
    Thanks.

  • Msi K9N2 Platinum SLI and Windows Server 2003 r2 32 bit edition

    Does anyone know or have tried to get this board to work on server 2003 32 bit edition. I seem to get past the raid part but the realtek 8211bl and audio are giving me fits. Any links to good drivers would be appreciated.
    Spec of system:
    Amd 9950 Quad
    4 gig memory
    Msi K9N2 Platinum SLI
    2 500 gig sata

    Ok overall solution this board works awesome with Windows Server 2003 Enterprise R2 with Sp 2.
    Here are a few tricks for the Co processor controller, Sm Bus, Audio and finally the networking controller.
    When you finally get windows loaded. Make sure you put Service Pack 2 or 3 on before u install drivers.
    The raid drivers are simple for the 32 bit version use the xp ones and load both raid drivers during setup. Requires 2 floppys or Slipstream disk.
    http://global.msi.com.tw/index.php?func=driverfile&dno=7067&i=2
    Once you get windows loaded and Sp 2 or better on. Stick in your windows vista driver disk in. Once there do not install anything.
    Goto device manager and update drivers on all that are with the yellow ? excpet the networking drivers and just do an automatic search and boom your done. It will also ask you if you want to enable your audio at this time. Do so but do not reboot untill u finish installing all drivers but networking. Than reboot pc
    Last part is for networking card. We need you to be in safe mode for this. So once u install all drivers and start reboot hit F8 and goto safe mode. Once in safe mode take out vista driver disk and put in xp driver disk. Goto device manager and update driver on network controller and let it do an automatic search and it will installl it. It will say it needs to be rebooted to work. Go ahead and reboot and your networking card will work.
    Probably simpliar solution. But just wanted to give my help.

  • Tuxedo Client on Windows Server 2003/2008

    I know this is a little unorthodox, and probably not supported, any pointers on possible problems with WSL and WSH would be nice though.
    I'm trying to run a .NET application that acts as a Tuxedo client on the Windows Server 2008 operating system. I've tried this with multiple versions of the Tuxedo client software, including 7, 8, 9, and 10. The application works fine on Windows XP.
    My client ULOG:
    120157.CI2009CORE!?proc.3376.2624.1: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
    120157.CI2009CORE!?proc.3376.2624.1: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
    120157.CI2009CORE!?proc.3376.2624.1: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
    Has anyone tried something like this before? Is there a server 2008 setting I'm missing?
    EDIT:
    Same problem on a server 2003 machine. Using the 10.0 win 2003 installation and tried it with the 10.0 winXP install.
    Edited by: user1953107 on Feb 16, 2009 3:23 PM

    My original problem with the WSL seems to have been not having enough environment variables and the tux.env file set. This leads me to another problem though. I need to be able to set the WSNADDR at runtime, which I thought I was doing, but the API seems to insist on using the environment settings instead of what is set in the application.
    Example:
    TypedTPINIT tpinfo = new TypedTPINIT();
    tpinfo.flags = TypedTPINIT.TPMULTICONTEXTS;                       
    Utils.tuxputenv("WSNADDR=//NOTVALID");
    AppContext ctx1 = AppContext.tpinit(tpinfo);
    TypedString requestString = new TypedString(tbInputData.Text);
    TypedBuffer replyBuffer = new TypedString(0);
    ctx1.tpcall(tbServiceName.Text, requestString, ref replyBuffer, 0);
    string result = ((TypedString)replyBuffer).GetString(0, (int)replyBuffer.Size);
    ctx1.tpterm();That ought to fail completely because the WSNADDR "//NOTVALID" doesn't point anywhere. I only use an invalid WSNADDR for illustration, because even when I set WSNADDR in the code to a valid location, the API uses what is in the env file instead. Likewise I can set the env file to an invalid location, but use a good one in the code and the system will also fail.
    I really need to determine WSNADDR at runtime, how do I do that? I believe I'm following the instructions found at Link: [http://edocs.bea.com/tuxedo/tux100/dotnet/dotnet_chapter.html] and not getting the desired results.

  • Does DPM 2012 R2 with rollup 2 support any version of Windows Server 2003/2008 on Hyper-V?

    We have Hyper-V Hosts with VMs which include Windows 2003/2003R2/2008/2008R2.
    If I we upgrade to DPM 2012 R2 Update Rollup 2, will we be able to backup all those VMs now?   The support matrix (http://technet.microsoft.com/en-us/library/jj860400.aspx)
    still seems to show what is supported by the initial release of DPM 2012 R2, not an updated version for the rollup.
    We currently use DPM 2012 SP1 and Hyper-V hosts using Server 2012.

    Hi,
    This is kind of a loaded question because DPM 2012 R2 never dropped support for protecting Windows 2003/2008 using host level backup.
    However, the support matrix will be updated shortly to include the added support for protecting workloads on Windows 2003 / 2008 using DPM 2012 R2 UR2.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Perfmon breaking when CF9 is install on Windows Server Core 2008 R2

    Hi,
    Before I install Coldfusion on my Windows Server 2008 R2 Core I can connect into Performance Monitoring remotely and view all the performance counters. After installing CF9 I can connect into the perfmon remotely but when I list the performance object/counters the list is there but completely blank - as in I can scroll through a list that has no text in it.
    If I try to pull perfmon information via WMI all the win32_PerfRawData and win32_PerfFormattedData classes are missing - including those not relating to IIS.
    Is it a case that CF9 is not supported on Server Core? Anyone know any fixes for this? I have tried both Server Install and Multiserver install but my perfmon counts are broken by CF9 each time.
    Everything else works and I can get my sites up and running just fine - it is just the performance counters that are being affected here and as they are important it means that I cannot use CF9 on Core edition as a result.
    Thanks for any help/advice.

    Hi
    Windows Server Core edition is not listed as supported platform:
    http://www.adobe.com/products/coldfusion/systemreqs/
    HTH, Carl.

  • Download Windows Server 2012 (not R2) evaluation copy

    Hi,
    If I try to download the windows server  2012 (not R2) evaluation copy from http://technet.microsoft.com/de-de/evalcenter/hh670538.aspx, I always get a  Windows 8 ISO (9200.16384.WIN8_RTM.120725-1247_X64FRE_SERVER_EVAL_DE-DE-HRM_SSS_X64FREE_DE-DE_DV5.ISO)
    Thats not that what I'm looking for. :-(
    I need to do some compatibility checking for server 2012, therefore I need the ISO image to install on a server.
    GReets
    Micha

    Hi Micha,
    I checked the download link and the ISO file name. It should be OK. As Tim mentioned, would you please
    let us confirm whether you had installed via this ISO file? After installation, did you find it was a Windows 8, not Windows Server 2012? Just a confirmation. Thanks for your understanding.
    In addition, if
    you use the link (English version) as Farhad suggested, will encounter the same issue?
    Best regards,
    Justin Gu

  • Windows Server Backup 2008 - Recovery a backup of a server to different server / hardware?

    Is there a way to restore a backup of a server to different box? I'm using Windows Server 2008.

    Hello,
         I was about to ask the same question about restoring a dc in a different hardware.
         A question arises in my mind: Is there no need any longer for third-party software (Acronis...) to restore a dc in a different hardware?.
        I am reading also about the backup and restore process in Exchange 2007 and it looks like the same thing, that it is not necessary any third-party tool to fully recover a Exchange machine, which is simply great, if I understand this rightly.
    Thanks in advance!
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

  • SCCM 2007 - Unable to download Windows Server Std 2012 Patches

    I am having issues downloading Windows 2012 Std Patches but with 2012 R2 it is fine.  I have to do it through WSUS which is on a separate server to get it work correctly.  Anyone else experiencing the issue

    Is this a CM07 or a WSUS question?
    http://www.enhansoft.com/

  • Oracle for window server 2003 xeon 64 bit

    Which oracle we use for window server 2003 xeon 64 bit

    Dear User,
    http://www.oracle.com/technology/support/metalink/index.html
    Regards,
    Taj

Maybe you are looking for

  • Call SmartForm in RFC

    We have a RFC calling a smartform and passing parameters to it. But I just cannot get the right results. It looks like an auth issue to me because the program works well using some account (say, UserA) but not well using other accounts(UserB). Howeve

  • Best Practice for Production environment

    Hello everyone, can someone share the best practice for a production environment? or is there a SAP standard best practice to follow in a Production landscape? i understand there are Best practices available for Implementation , Migration and upgrade

  • Movie rental download issues

    I downloaded a rental( movie) and do not find it. When i went to rent it again it said that I had already rented it. ANy help would be great.

  • Toshiba satelite S855-S5188 Freaks out and doesn't respond

    Hey, i bought a Toshiba Satelite S855-S5188 from NewEgg.com about two months ago, at first i thought it was nothing, which then Subsequently it ceased to occur for a period of time but now it has been starting back up, this time i have to Shut it dow

  • IBooks author - publishing books - different countries

    Is it possible to publish a book to the US and for example Netherlands (or other EU country) store? Or is all content published to the ibooks store accessable throughout the univers :-)