Download worked and then stopped
I downloaded the trial version of adobe photoshop elements and it worked great the first day. Today I tried to continue working on a project I had started the other day and it wont let me access the program. I tried to reinstall the free trial and now I get an error message and it took the program off of my computer. Is there anyway I can reinstall the trial on my computer so I can finish the project I started?
What specific error messages are you receiving? Which operating system do you have installed?
Similar Messages
-
Is there a reason that I can't download the latest update for my iPhone 4? It downloads halfway and then stops.
Have you ever jailbroken your iPhone with tether? Because if you have the jailbreak keeps a file on your phone making it so you can't update. To solve this problem your going to have to reset your phone.
-
How come auto-rotate sometimes works, and then stops working until i reboot?
I am going to be as specific as possible simply because some people seem to have similar problems, but mostly they just can't get it to rotate. I have a 6, and for whatever reason it is finicky with auto rotating after going into an app. Say i am in messages in portrait mode and i exit in portrait mode. When i go back in in landscape mode it won't rotate without me first putting the phone into portrait, allowing the gyro (or whatever controls this) to reset, and then rotating it back to landscape. However, if i reboot the phone, it will work without issue for a short while, automatically detecting which mode it's in and adjusting itself accordingly, until it stops working again. This happens with most pre-installed apps like Messages, Safari, and Mail. Any help would be appreciated. I also get freeze ups from time to time while typing, where the screen isn't responsive at all after switching modes, so i have to rotate, and then back again to get the keyboard to accept entries.
The issue turned out to be the mouse. It was somehow shorting the USB ports. I tried a different mouse from restart rather than only after the problem began.
-
TCS 5 RoboHelp and FrameMaker links work and then stop
Hi,
I installed TCS 5 after installing a trial of RoboHelp 11. After I installed, I opened a project from TCS 4 and I was able to update an existing linked FM book and Link to new files. The FM files were converted ot FM 12 and the RoboHelp project was converted to RoboHelp 11.
Now, when I reopen the RoboHelp project, I cannot update or link to FrameMaker documents.
I am running Windows 7. I run both RH and FM as administrator and I have owner permissions to the Adobe folder.
I tried uninstalling and reinstalling TCS 5 and the behavior is consistent. Is there some registry entry or something i should look for?
LaurenFirst my client, then I saw the exact same thing.
One day the project worked perfectly, then the next day the linking options were all unavailable. It's as if Rh decided it was no longer associating with Fm.
Oddly, another client team member was unaffected.
I'm trying to track down the issue. Did you resolve the linking problem? -
Adobe was working and then stopped.
I wanted to watch something on CBS.com (The big brother live feeds). I watch it fine for 2 days and on the 3rd day it worked fine. I paused the player and 15 mins went back and it said I needed to update flash to adobe 10. But the thing is, I was using 11.7 something. It's on my work computer so its hard to really do much. But i dont get why it all of a sudden stopped working. Anyone know what to do? Keep in mind, I dont have rights to update the player or uninstall it. Hope someeone can help me.
Anyone wanna help me out? Or does this truely stump everyone. Should I add I'm using windows XP and Internet Explorer.
-
After replacing my battery with a long life battery and powering up the phone, I was directed to plug into iTunes where a download began and then stopped, returning me to the screen instructing me to plug into iTunes again. I cannot get past this point. I even tried reinstalling the original battery but still have the same problem. How can I resolve?
robertfrommarlboro wrote:
I even tried reinstalling the original battery -
I am trying to get my computer to print on HPC310. It was working until 2 days ago and then stopped working. I uninstalled the HP software thinking I could just reinstall and it would help but I cannot now install that software from the disk. How do I go about getting the old software I had on the computer and how do I get my computer to print. It gives my messages that it cannot find the printer or printer unknown.
Your operating system, Snow Leopard (OS X 10.6), does not support AppleTalk. Instead, in Snow Leopard the HP 4000 series printers need to be set up to communicate via IP.
Go to System Preferences and open the Print & Fax item. Is your printer listed in that pane? -
Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?
Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox. -
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
I am having trouble updating iTunes 10.7- it downloads about 70% then stops and says error. What can I do to update??
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user. Please help.
This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
· Is the computer on a domain?
· Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed." -
Everytime I open up Itunes I can listen to my music, but once I connect it to my IPod, it says "ITunes has stopped working" and then ITunes ***** down. How do I fix this problem?
Hi The Funkster,
The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
How to troubleshoot iTunes Match - Apple Support
http://support.apple.com/en-us/TS4054
I hope this information helps ....
- Judy -
Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works. So how can I fix this I have tried converting videos into different formats but it will not work.
Is IOS 8 really appropriate with Ipod Touch 4, if the older Ipods do not have the capability then why are we prompted to install new operating systems.
Thanks.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Multicast works for a day and then stops
I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons. It works consistently on 3 out of 6 WLAN's. And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing. I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC. 2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan. I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day. I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning. It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on. It started doing this after upgrading to 7.0.240.0. We have very little amount of multicast traffic on wireless, and low channel utilization. It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates. When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller. It shouldn't be wired config related since it's unicast mode. I've tried with and without broadcasting enabled. Any ideas?
Okay, so I discovered two things, but I still don't know what caused this problem. When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug. This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day. When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day. So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast.
What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power). This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again. Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those. I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again. Or maybe reboot after changing EAP-Broadcast Key interval.
Maybe you are looking for
-
I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ... In fact afte
-
I have got this problem since i bought this Ethernet adapter. I mainly boght it, because I wanted to run OpenBSD. But it just doesn't work. Theres i light when I plug my ethernet cable to it, but that it just about it. I have tried to disable my onbo
-
Is there a script to add to a form in LiveCycle to disable digital stamp editing in Adobe Reader
I work for a state Agency and we want to use digital stamps as our signatures on our internal documents. I have created the form in LiveCycle and I know that in Adobe Reader by default the stamp will use the person's sign on ID for the stamp and then
-
Creating files from a table and placing it in a different folders based on ID Column
I have a table <tab> <tab> <col1> <col2> .... ID1 Data.. ID1 Data.. ID1 Data.. ID2 Data.. ID2 Data.. ID3 Data.. I've another table which gives me information about the path where to place ID1 data and where to Place ID2 data ..so on <tab2> <co
-
Strange RAM behaviour on Mavericks
Hi all, so I'm having this strange occurance with Mavericks... I have programs like iStat on the Dashboard and Menumeters, the more I use my Mac or the longer it's on without a reboot (It's usually on 24/7) the less total ram shows on the programs. F